linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Lechner <dlechner@baylibre.com>
To: linux-spi@vger.kernel.org, devicetree@vger.kernel.org
Cc: "David Lechner" <dlechner@baylibre.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Michael Hennerich" <Michael.Hennerich@analog.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Lars-Peter Clausen" <lars@metafoo.de>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 12/14] spi: axi-spi-engine: remove struct spi_engine::msg
Date: Fri, 17 Nov 2023 14:13:03 -0600	[thread overview]
Message-ID: <20231117-axi-spi-engine-series-1-v1-12-cc59db999b87@baylibre.com> (raw)
In-Reply-To: <20231117-axi-spi-engine-series-1-v1-0-cc59db999b87@baylibre.com>

In the AXI SPI Engine driver, the struct spi_engine::msg member was used
to keep track of the current message being processed. The SPI core is
already keeping track of this, so we don't need to duplicate the effort.

In most cases, we already have a pointer to the current message, so we
can pass it directly to the functions that need it. In the one case
where we don't have a pointer to the current message, we can get it
from struct spi_controller::cur_msg.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/spi/spi-axi-spi-engine.c | 60 +++++++++++++++++++---------------------
 1 file changed, 28 insertions(+), 32 deletions(-)

diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
index 120001dbc4dc..c39f478f34a7 100644
--- a/drivers/spi/spi-axi-spi-engine.c
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -112,8 +112,6 @@ struct spi_engine {
 	spinlock_t lock;
 
 	void __iomem *base;
-
-	struct spi_message *msg;
 	struct ida sync_ida;
 
 	unsigned int int_enable;
@@ -252,10 +250,9 @@ static int spi_engine_compile_message(struct spi_engine *spi_engine,
 	return 0;
 }
 
-static void spi_engine_xfer_next(struct spi_engine *spi_engine,
+static void spi_engine_xfer_next(struct spi_message *msg,
 	struct spi_transfer **_xfer)
 {
-	struct spi_message *msg = spi_engine->msg;
 	struct spi_transfer *xfer = *_xfer;
 
 	if (!xfer) {
@@ -270,13 +267,13 @@ static void spi_engine_xfer_next(struct spi_engine *spi_engine,
 	*_xfer = xfer;
 }
 
-static void spi_engine_tx_next(struct spi_engine *spi_engine)
+static void spi_engine_tx_next(struct spi_message *msg)
 {
-	struct spi_engine_message_state *st = spi_engine->msg->state;
+	struct spi_engine_message_state *st = msg->state;
 	struct spi_transfer *xfer = st->tx_xfer;
 
 	do {
-		spi_engine_xfer_next(spi_engine, &xfer);
+		spi_engine_xfer_next(msg, &xfer);
 	} while (xfer && !xfer->tx_buf);
 
 	st->tx_xfer = xfer;
@@ -288,13 +285,13 @@ static void spi_engine_tx_next(struct spi_engine *spi_engine)
 	}
 }
 
-static void spi_engine_rx_next(struct spi_engine *spi_engine)
+static void spi_engine_rx_next(struct spi_message *msg)
 {
-	struct spi_engine_message_state *st = spi_engine->msg->state;
+	struct spi_engine_message_state *st = msg->state;
 	struct spi_transfer *xfer = st->rx_xfer;
 
 	do {
-		spi_engine_xfer_next(spi_engine, &xfer);
+		spi_engine_xfer_next(msg, &xfer);
 	} while (xfer && !xfer->rx_buf);
 
 	st->rx_xfer = xfer;
@@ -306,10 +303,11 @@ static void spi_engine_rx_next(struct spi_engine *spi_engine)
 	}
 }
 
-static bool spi_engine_write_cmd_fifo(struct spi_engine *spi_engine)
+static bool spi_engine_write_cmd_fifo(struct spi_engine *spi_engine,
+				      struct spi_message *msg)
 {
 	void __iomem *addr = spi_engine->base + SPI_ENGINE_REG_CMD_FIFO;
-	struct spi_engine_message_state *st = spi_engine->msg->state;
+	struct spi_engine_message_state *st = msg->state;
 	unsigned int n, m, i;
 	const uint16_t *buf;
 
@@ -327,10 +325,11 @@ static bool spi_engine_write_cmd_fifo(struct spi_engine *spi_engine)
 	return st->cmd_length != 0;
 }
 
-static bool spi_engine_write_tx_fifo(struct spi_engine *spi_engine)
+static bool spi_engine_write_tx_fifo(struct spi_engine *spi_engine,
+				     struct spi_message *msg)
 {
 	void __iomem *addr = spi_engine->base + SPI_ENGINE_REG_SDO_DATA_FIFO;
-	struct spi_engine_message_state *st = spi_engine->msg->state;
+	struct spi_engine_message_state *st = msg->state;
 	unsigned int n, m, i;
 	const uint8_t *buf;
 
@@ -344,16 +343,17 @@ static bool spi_engine_write_tx_fifo(struct spi_engine *spi_engine)
 		st->tx_length -= m;
 		n -= m;
 		if (st->tx_length == 0)
-			spi_engine_tx_next(spi_engine);
+			spi_engine_tx_next(msg);
 	}
 
 	return st->tx_length != 0;
 }
 
-static bool spi_engine_read_rx_fifo(struct spi_engine *spi_engine)
+static bool spi_engine_read_rx_fifo(struct spi_engine *spi_engine,
+				    struct spi_message *msg)
 {
 	void __iomem *addr = spi_engine->base + SPI_ENGINE_REG_SDI_DATA_FIFO;
-	struct spi_engine_message_state *st = spi_engine->msg->state;
+	struct spi_engine_message_state *st = msg->state;
 	unsigned int n, m, i;
 	uint8_t *buf;
 
@@ -367,7 +367,7 @@ static bool spi_engine_read_rx_fifo(struct spi_engine *spi_engine)
 		st->rx_length -= m;
 		n -= m;
 		if (st->rx_length == 0)
-			spi_engine_rx_next(spi_engine);
+			spi_engine_rx_next(msg);
 	}
 
 	return st->rx_length != 0;
@@ -376,6 +376,7 @@ static bool spi_engine_read_rx_fifo(struct spi_engine *spi_engine)
 static irqreturn_t spi_engine_irq(int irq, void *devid)
 {
 	struct spi_controller *host = devid;
+	struct spi_message *msg = host->cur_msg;
 	struct spi_engine *spi_engine = spi_controller_get_devdata(host);
 	unsigned int disable_int = 0;
 	unsigned int pending;
@@ -393,29 +394,26 @@ static irqreturn_t spi_engine_irq(int irq, void *devid)
 	spin_lock(&spi_engine->lock);
 
 	if (pending & SPI_ENGINE_INT_CMD_ALMOST_EMPTY) {
-		if (!spi_engine_write_cmd_fifo(spi_engine))
+		if (!spi_engine_write_cmd_fifo(spi_engine, msg))
 			disable_int |= SPI_ENGINE_INT_CMD_ALMOST_EMPTY;
 	}
 
 	if (pending & SPI_ENGINE_INT_SDO_ALMOST_EMPTY) {
-		if (!spi_engine_write_tx_fifo(spi_engine))
+		if (!spi_engine_write_tx_fifo(spi_engine, msg))
 			disable_int |= SPI_ENGINE_INT_SDO_ALMOST_EMPTY;
 	}
 
 	if (pending & (SPI_ENGINE_INT_SDI_ALMOST_FULL | SPI_ENGINE_INT_SYNC)) {
-		if (!spi_engine_read_rx_fifo(spi_engine))
+		if (!spi_engine_read_rx_fifo(spi_engine, msg))
 			disable_int |= SPI_ENGINE_INT_SDI_ALMOST_FULL;
 	}
 
-	if (pending & SPI_ENGINE_INT_SYNC && spi_engine->msg) {
-		struct spi_engine_message_state *st = spi_engine->msg->state;
+	if (pending & SPI_ENGINE_INT_SYNC && msg) {
+		struct spi_engine_message_state *st = msg->state;
 
 		if (completed_id == st->sync_id) {
-			struct spi_message *msg = spi_engine->msg;
-
 			msg->status = 0;
 			msg->actual_length = msg->frame_length;
-			spi_engine->msg = NULL;
 			spi_finalize_current_message(host);
 			disable_int |= SPI_ENGINE_INT_SYNC;
 		}
@@ -499,16 +497,14 @@ static int spi_engine_transfer_one_message(struct spi_controller *host,
 
 	spin_lock_irqsave(&spi_engine->lock, flags);
 
-	spi_engine->msg = msg;
-
-	if (spi_engine_write_cmd_fifo(spi_engine))
+	if (spi_engine_write_cmd_fifo(spi_engine, msg))
 		int_enable |= SPI_ENGINE_INT_CMD_ALMOST_EMPTY;
 
-	spi_engine_tx_next(spi_engine);
-	if (spi_engine_write_tx_fifo(spi_engine))
+	spi_engine_tx_next(msg);
+	if (spi_engine_write_tx_fifo(spi_engine, msg))
 		int_enable |= SPI_ENGINE_INT_SDO_ALMOST_EMPTY;
 
-	spi_engine_rx_next(spi_engine);
+	spi_engine_rx_next(msg);
 	if (st->rx_length != 0)
 		int_enable |= SPI_ENGINE_INT_SDI_ALMOST_FULL;
 

-- 
2.42.0


  parent reply	other threads:[~2023-11-17 20:14 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-17 20:12 [PATCH 00/14] spi: axi-spi-engine improvements David Lechner
2023-11-17 20:12 ` [PATCH 01/14] dt-bindings: spi: axi-spi-engine: convert to yaml David Lechner
2023-11-19 16:18   ` Rob Herring
2023-11-17 20:12 ` [PATCH 02/14] MAINTAINERS: add entry for AXI SPI Engine David Lechner
2023-11-17 20:44   ` David Lechner
2023-11-19 19:01     ` Lars-Peter Clausen
2023-11-17 20:12 ` [PATCH 03/14] spi: axi-spi-engine: simplify driver data allocation David Lechner
2023-11-17 20:12 ` [PATCH 04/14] spi: axi-spi-engine: use devm_spi_alloc_host() David Lechner
2023-11-17 20:12 ` [PATCH 05/14] spi: axi-spi-engine: use devm action to reset hw on remove David Lechner
2023-11-17 20:12 ` [PATCH 06/14] spi: axi-spi-engine: use devm_request_irq() David Lechner
2023-11-17 20:12 ` [PATCH 07/14] spi: axi-spi-engine: use devm_spi_register_controller() David Lechner
2023-11-17 20:12 ` [PATCH 08/14] spi: axi-spi-engine: check for valid clock rate David Lechner
2023-11-17 20:13 ` [PATCH 09/14] spi: axi-spi-engine: move msg state to new struct David Lechner
2023-11-18  3:55   ` kernel test robot
2023-11-17 20:13 ` [PATCH 10/14] spi: axi-spi-engine: use message_prepare/unprepare David Lechner
2023-11-17 20:13 ` [PATCH 11/14] spi: axi-spi-engine: remove completed_id from driver state David Lechner
2023-11-17 20:13 ` David Lechner [this message]
2023-11-17 20:13 ` [PATCH 13/14] spi: axi-spi-engine: add support for cs_off David Lechner
2023-11-17 20:13 ` [PATCH 14/14] spi: axi-spi-engine: add support for any word size David Lechner
2023-11-20 18:25 ` [PATCH 00/14] spi: axi-spi-engine improvements Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231117-axi-spi-engine-series-1-v1-12-cc59db999b87@baylibre.com \
    --to=dlechner@baylibre.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).