linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Lechner <dlechner@baylibre.com>
To: Mark Brown <broonie@kernel.org>
Cc: "David Lechner" <dlechner@baylibre.com>,
	"Martin Sperl" <kernel@martin.sperl.org>,
	"David Jander" <david@protonic.nl>,
	"Jonathan Cameron" <jic23@kernel.org>,
	"Michael Hennerich" <michael.hennerich@analog.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Alain Volmat" <alain.volmat@foss.st.com>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org, linux-iio@vger.kernel.org,
	"Julien Stephan" <jstephan@baylibre.com>
Subject: [PATCH v2 4/5] spi: axi-spi-engine: move message compile to optimize_message
Date: Mon, 19 Feb 2024 16:33:21 -0600	[thread overview]
Message-ID: <20240219-mainline-spi-precook-message-v2-4-4a762c6701b9@baylibre.com> (raw)
In-Reply-To: <20240219-mainline-spi-precook-message-v2-0-4a762c6701b9@baylibre.com>

In the AXI SPI Engine driver, compiling the message is an expensive
operation. Previously, it was done per message transfer in the
prepare_message hook. This patch moves the message compile to the
optimize_message hook so that it is only done once per message in
cases where the peripheral driver calls spi_optimize_message().

This can be a significant performance improvement for some peripherals.
For example, the ad7380 driver saw a 13% improvement in throughput
when using the AXI SPI Engine driver with this patch.

Since we now need two message states, one for the optimization stage
that doesn't change for the lifetime of the message and one that is
reset on each transfer for managing the current transfer state, the old
msg->state is split into msg->opt_state and spi_engine->msg_state. The
latter is included in the driver struct now since there is only one
current message at a time that can ever use it and it is in a hot path
so avoiding allocating a new one on each message transfer saves a few
cpu cycles and lets us get rid of the prepare_message callback.

Signed-off-by: David Lechner <dlechner@baylibre.com>
---

v2 changes: none

 drivers/spi/spi-axi-spi-engine.c | 40 +++++++++++++++++-----------------------
 1 file changed, 17 insertions(+), 23 deletions(-)

diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c
index ca66d202f0e2..6177c1a8d56e 100644
--- a/drivers/spi/spi-axi-spi-engine.c
+++ b/drivers/spi/spi-axi-spi-engine.c
@@ -109,6 +109,7 @@ struct spi_engine {
 	spinlock_t lock;
 
 	void __iomem *base;
+	struct spi_engine_message_state msg_state;
 	struct completion msg_complete;
 	unsigned int int_enable;
 };
@@ -499,17 +500,11 @@ static irqreturn_t spi_engine_irq(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
-static int spi_engine_prepare_message(struct spi_controller *host,
-				      struct spi_message *msg)
+static int spi_engine_optimize_message(struct spi_message *msg)
 {
 	struct spi_engine_program p_dry, *p;
-	struct spi_engine_message_state *st;
 	size_t size;
 
-	st = kzalloc(sizeof(*st), GFP_KERNEL);
-	if (!st)
-		return -ENOMEM;
-
 	spi_engine_precompile_message(msg);
 
 	p_dry.length = 0;
@@ -517,31 +512,22 @@ static int spi_engine_prepare_message(struct spi_controller *host,
 
 	size = sizeof(*p->instructions) * (p_dry.length + 1);
 	p = kzalloc(sizeof(*p) + size, GFP_KERNEL);
-	if (!p) {
-		kfree(st);
+	if (!p)
 		return -ENOMEM;
-	}
 
 	spi_engine_compile_message(msg, false, p);
 
 	spi_engine_program_add_cmd(p, false, SPI_ENGINE_CMD_SYNC(
 						AXI_SPI_ENGINE_CUR_MSG_SYNC_ID));
 
-	st->p = p;
-	st->cmd_buf = p->instructions;
-	st->cmd_length = p->length;
-	msg->state = st;
+	msg->opt_state = p;
 
 	return 0;
 }
 
-static int spi_engine_unprepare_message(struct spi_controller *host,
-					struct spi_message *msg)
+static int spi_engine_unoptimize_message(struct spi_message *msg)
 {
-	struct spi_engine_message_state *st = msg->state;
-
-	kfree(st->p);
-	kfree(st);
+	kfree(msg->opt_state);
 
 	return 0;
 }
@@ -550,10 +536,18 @@ static int spi_engine_transfer_one_message(struct spi_controller *host,
 	struct spi_message *msg)
 {
 	struct spi_engine *spi_engine = spi_controller_get_devdata(host);
-	struct spi_engine_message_state *st = msg->state;
+	struct spi_engine_message_state *st = &spi_engine->msg_state;
+	struct spi_engine_program *p = msg->opt_state;
 	unsigned int int_enable = 0;
 	unsigned long flags;
 
+	/* reinitialize message state for this transfer */
+	memset(st, 0, sizeof(*st));
+	st->p = p;
+	st->cmd_buf = p->instructions;
+	st->cmd_length = p->length;
+	msg->state = st;
+
 	reinit_completion(&spi_engine->msg_complete);
 
 	spin_lock_irqsave(&spi_engine->lock, flags);
@@ -658,8 +652,8 @@ static int spi_engine_probe(struct platform_device *pdev)
 	host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
 	host->max_speed_hz = clk_get_rate(spi_engine->ref_clk) / 2;
 	host->transfer_one_message = spi_engine_transfer_one_message;
-	host->prepare_message = spi_engine_prepare_message;
-	host->unprepare_message = spi_engine_unprepare_message;
+	host->optimize_message = spi_engine_optimize_message;
+	host->unoptimize_message = spi_engine_unoptimize_message;
 	host->num_chipselect = 8;
 
 	if (host->max_speed_hz == 0)

-- 
2.43.2


  parent reply	other threads:[~2024-02-19 22:35 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-19 22:33 [PATCH v2 0/5] spi: add support for pre-cooking messages David Lechner
2024-02-19 22:33 ` [PATCH v2 1/5] spi: add spi_optimize_message() APIs David Lechner
2024-02-20 10:50   ` Nuno Sá
2024-02-24 16:36   ` Jonathan Cameron
2024-02-24 18:15   ` Markus Elfring
2024-02-24 20:09   ` Markus Elfring
2024-02-26 13:48   ` Mark Brown
2024-02-19 22:33 ` [PATCH v2 2/5] spi: move splitting transfers to spi_optimize_message() David Lechner
2024-02-20 10:52   ` Nuno Sá
2024-02-19 22:33 ` [PATCH v2 3/5] spi: stm32: move splitting transfers to optimize_message David Lechner
2024-02-24 16:45   ` Jonathan Cameron
2024-02-19 22:33 ` David Lechner [this message]
2024-02-20 10:45   ` [PATCH v2 4/5] spi: axi-spi-engine: move message compile " Nuno Sá
2024-02-24 16:51   ` Jonathan Cameron
2024-02-19 22:33 ` [PATCH v2 5/5] iio: adc: ad7380: use spi_optimize_message() David Lechner
2024-02-20 10:41   ` Nuno Sá
2024-02-24 16:57   ` Jonathan Cameron
2024-02-27 16:36     ` David Lechner
2024-02-26 19:16 ` (subset) [PATCH v2 0/5] spi: add support for pre-cooking messages Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240219-mainline-spi-precook-message-v2-4-4a762c6701b9@baylibre.com \
    --to=dlechner@baylibre.com \
    --cc=alain.volmat@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=broonie@kernel.org \
    --cc=david@protonic.nl \
    --cc=jic23@kernel.org \
    --cc=jstephan@baylibre.com \
    --cc=kernel@martin.sperl.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=michael.hennerich@analog.com \
    --cc=nuno.sa@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).