linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
To: Steffen Trumtrar <s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: <dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>,
	<broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	<robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	<pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	<mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	<galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	<linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	<tthayer.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	<tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>,
	<axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>,
	<baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org>,
	<andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: Re: [PATCHv3] arm: dts: socfpga: Add SPI nodes to SOCFPGA DT.
Date: Fri, 17 Oct 2014 08:55:21 -0500	[thread overview]
Message-ID: <54411FC9.3050109@opensource.altera.com> (raw)
In-Reply-To: <20141017065233.GA10262-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>


On 10/17/2014 01:52 AM, Steffen Trumtrar wrote:
> Hi!
>
> On Thu, Oct 16, 2014 at 05:07:31PM -0500, tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org wrote:
>> From: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
>>
>> Add 2 SPI nodes to SOCFPGA device tree.
>>
>> Signed-off-by: Thor Thayer <tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
>> ---
>> v2: Remove extra files. Move SPIDEV into board specific file.
>>
>> v3: Remove dts file since SPIDEV is not allowed.
>> ---
>>   arch/arm/boot/dts/socfpga.dtsi |   24 ++++++++++++++++++++++++
>>   1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
>> index 4d77ad6..d81bc2d3 100644
>> --- a/arch/arm/boot/dts/socfpga.dtsi
>> +++ b/arch/arm/boot/dts/socfpga.dtsi
>> @@ -628,6 +628,30 @@
>>   			clock-names = "biu", "ciu";
>>   		};
>>   
>> +		spi0: spi@fff00000 {
>> +			compatible = "snps,dw-apb-ssi";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0xfff00000 0x1000>;
>> +			interrupts = <0 154 4>;
>> +			num-cs = <4>;
>> +			bus-num = <0>;
> 			^^^^^^^^^^^^^^
>
> I think you can/should get rid of this property. It is only used/documented for
> fsl-dspi as far as I can see.
Hi Steffen!

You are right, I will remove this.

I didn't see it documented in the dw-spi bindings but I did see a 
reference to .bus_num in the static structure (spi_board_info) shown in 
spi-summary.txt. If the bus-num isn't defined or used, the bus ends up 
as 32766 (0x7FE). However, the main point is that this isn't used in the 
code so I should remove it.

Thanks for your input and for reviewing!

Thor
>> +			clocks = <&spi_m_clk>;
>> +			status = "disabled";
>> +		};
>> +
>> +		spi1: spi@fff01000 {
>> +			compatible = "snps,dw-apb-ssi";
>> +			#address-cells = <1>;
>> +			#size-cells = <0>;
>> +			reg = <0xfff01000 0x1000>;
>> +			interrupts = <0 156 4>;
>> +			num-cs = <4>;
>> +			bus-num = <1>;
>> +			clocks = <&spi_m_clk>;
>> +			status = "disabled";
>> +		};
>> +
>>   		/* Local timer */
>>   		timer@fffec600 {
>>   			compatible = "arm,cortex-a9-twd-timer";
> The rest looks good IMO.
>
> Regards,
> Steffen
>

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-10-17 13:55 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-16 22:07 [PATCHv3] Add SPI nodes to Altera SOCFPGA DT tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
     [not found] ` <1413497251-21954-1-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-16 22:07   ` [PATCHv3] arm: dts: socfpga: Add SPI nodes to " tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx
     [not found]     ` <1413497251-21954-2-git-send-email-tthayer-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-17  6:52       ` Steffen Trumtrar
     [not found]         ` <20141017065233.GA10262-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-10-17 11:13           ` Mark Brown
2014-10-17 13:55           ` Thor Thayer [this message]
     [not found]             ` <54411FC9.3050109-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org>
2014-10-17 14:27               ` Mark Brown
     [not found]                 ` <20141017142713.GV1820-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-10-17 15:05                   ` Thor Thayer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54411FC9.3050109@opensource.altera.com \
    --to=tthayer-yzvpicuk2abmcg4ihk0kfoh6mc4mb0vx@public.gmane.org \
    --cc=andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org \
    --cc=baruch-NswTu9S1W3P6gbPvEgmw2w@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dinguyen-yzvPICuk2ABMcg4IHK0kFoH6Mc4MB0Vx@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=s.trumtrar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org \
    --cc=tthayer.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).