linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ramuthevar, Vadivel MuruganX" <vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: "linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-spi <linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	"Mark Brown" <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	"Vignesh R" <vigneshr-l0cyMroinI0@public.gmane.org>,
	simon.k.r.goldschmidt-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	"Dinh Nguyen" <dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	tien.fong.chee-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	"Marek Vašut" <marex-ynQEQJNshbs@public.gmane.org>,
	cheol.yong.kim-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	qi-ming.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Subject: Re: [PATCH v10 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver
Date: Tue, 25 Feb 2020 14:24:07 +0800	[thread overview]
Message-ID: <64b7ab12-0c11-df25-95e7-ee62227ec7ec@linux.intel.com> (raw)
In-Reply-To: <CAL_JsqKJky=y4nhECUFVzTYvEpjFoOH_6UY9uZG5bvBVWq=SYQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>

Hi Rob,

      Thank you for the review comments...

On 24/2/2020 11:54 PM, Rob Herring wrote:
> On Tue, Feb 18, 2020 at 8:29 PM Ramuthevar,Vadivel MuruganX
> <vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
> Cc the DT list if you want this reviewed.
Sorry,  next patch will add DT list in CC.
>> Add dt-bindings documentation for Cadence-QSPI controller to support
>> spi based flash memories.
>>
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
>> ---
>>   .../devicetree/bindings/spi/cdns,qspi-nor.yaml     | 147 +++++++++++++++++++++
>>   1 file changed, 147 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> new file mode 100644
>> index 000000000000..1a4d6e8d0d0b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> @@ -0,0 +1,147 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/spi/cdns,qspi-nor.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Cadence QSPI Flash Controller support
>> +
>> +maintainers:
>> +  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
>> +
>> +allOf:
>> +  - $ref: "spi-controller.yaml#"
>> +
>> +description: |
>> +  Binding Documentation for Cadence QSPI controller,This controller is
>> +  present in the Intel LGM, Altera SoCFPGA and TI SoCs and this driver
>> +  has been tested On Intel's LGM SoC.
>> +
>> +  - compatible : should be one of the following:
>> +        Generic default - "cdns,qspi-nor".
>> +        For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
>> +        For TI AM654 SoC  - "ti,am654-ospi", "cdns,qspi-nor".
>> +        For Intel LGM SoC - "intel,lgm-qspi", "cdns,qspi-nor".
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - items:
>> +        - enum:
>> +           - ti,k2g-qspi
>> +        - const: cdns,qspi-nor
>> +
>> +      - items:
>> +        - enum:
>> +           - ti,am654-ospi
>> +        - const: cdns,qspi-nor
>> +
>> +      - items:
>> +        - enum:
>> +           - intel,lgm-qspi
>> +        - const: cdns,qspi-nor
>> +
>> +      - items:
>> +        - const: cdns,qspi-nor
>> +
>> +  reg:
>> +    maxItems: 2
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  cdns,fifo-depth:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description:
>> +      Size of the data FIFO in words.
> A 4GB fifo is valid? Add some constraints.
128 is valid, will update.
>> +
>> +  cdns,fifo-width:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description:
>> +      Bus width of the data FIFO in bytes.
> Add some constraints.
4 is valid , will fix it.
>> +
>> +  cdns,trigger-address:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description:
>> +      32-bit indirect AHB trigger address.
>> +
>> +  cdns,rclk-en:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: |
>> +      Flag to indicate that QSPI return clock is used to latch the read data
>> +      rather than the QSPI clock. Make sure that QSPI return clock is populated
>> +      on the board before using this property.
>> +
>> +# subnode's properties
>> +patternProperties:
>> +  "^.*@[0-9a-fA-F]+$":
>> +    type: object
>> +    description:
>> +      flash device uses the subnodes below defined properties.
>> +
>> +  cdns,read-delay:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description:
>> +      Delay for read capture logic, in clock cycles.
> 4 billion clock delay is valid?
based on the ref_clk , will add it.
>> +
>> +  cdns,tshsl-ns:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
> You can drop this, anything with a standard unit suffix already has a type.
sure , will drop it.
>> +    description: |
>> +      Delay in nanoseconds for the length that the master mode chip select
>> +      outputs are de-asserted between transactions.
> Constraints...?

50ns, will add it.

Regards
Vadivel
>> +
>> +  cdns,tsd2d-ns:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: |
>> +      Delay in nanoseconds between one chip select being de-activated
>> +      and the activation of another.
>> +
>> +  cdns,tchsh-ns:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: |
>> +      Delay in nanoseconds between last bit of current transaction and
>> +      deasserting the device chip select (qspi_n_ss_out).
>> +
>> +  cdns,tslch-ns:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: |
>> +      Delay in nanoseconds between setting qspi_n_ss_out low and
>> +      first bit transfer.
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +  - clocks
>> +  - cdns,fifo-depth
>> +  - cdns,fifo-width
>> +  - cdns,trigger-address
>> +
>> +examples:
>> +  - |
>> +    qspi: spi@ff705000 {
>> +          compatible = "cdns,qspi-nor";
>> +          #address-cells = <1>;
>> +          #size-cells = <0>;
>> +          reg = <0xff705000 0x1000>,
>> +                <0xffa00000 0x1000>;
>> +          interrupts = <0 151 4>;
>> +          clocks = <&qspi_clk>;
>> +          cdns,fifo-depth = <128>;
>> +          cdns,fifo-width = <4>;
>> +          cdns,trigger-address = <0x00000000>;
>> +
>> +          flash0: n25q00@0 {
>> +              compatible = "jedec,spi-nor";
>> +              reg = <0x0>;
>> +              cdns,read-delay = <4>;
>> +              cdns,tshsl-ns = <50>;
>> +              cdns,tsd2d-ns = <50>;
>> +              cdns,tchsh-ns = <4>;
>> +              cdns,tslch-ns = <4>;
>> +          };
>> +    };
>> +
>> --
>> 2.11.0
>>

  parent reply	other threads:[~2020-02-25  6:24 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-19  2:28 [PATCH v10 0/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller Ramuthevar,Vadivel MuruganX
     [not found] ` <20200219022852.28065-1-vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-02-19  2:28   ` [PATCH v10 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver Ramuthevar,Vadivel MuruganX
     [not found]     ` <20200219022852.28065-2-vadivel.muruganx.ramuthevar-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-02-24 15:54       ` Rob Herring
     [not found]         ` <CAL_JsqKJky=y4nhECUFVzTYvEpjFoOH_6UY9uZG5bvBVWq=SYQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2020-02-25  6:24           ` Ramuthevar, Vadivel MuruganX [this message]
     [not found]             ` <64b7ab12-0c11-df25-95e7-ee62227ec7ec-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-02-25  6:41               ` Vignesh Raghavendra
     [not found]                 ` <85178128-4906-8b1a-e3f1-ab7a36ff8c23-l0cyMroinI0@public.gmane.org>
2020-02-25  7:38                   ` Ramuthevar, Vadivel MuruganX
     [not found]                     ` <c119a70d-b7ef-ab1b-4590-7ac77395297f-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
2020-02-25 11:00                       ` Vignesh Raghavendra
     [not found]                         ` <8c329860-84fd-463b-782f-83a788998878-l0cyMroinI0@public.gmane.org>
2020-02-26  1:32                           ` Ramuthevar, Vadivel MuruganX
2020-02-27  5:23                             ` Vignesh Raghavendra
     [not found]                               ` <22bb0c6c-db03-dee5-eccf-84b00216308f-l0cyMroinI0@public.gmane.org>
2020-02-27  5:59                                 ` Ramuthevar, Vadivel MuruganX
2020-02-19  2:28   ` [PATCH v10 2/2] spi: cadence-quadpsi: Add support for the Cadence QSPI controller Ramuthevar,Vadivel MuruganX
2020-02-19  8:28   ` [PATCH v10 0/2] " Marek Vasut
2020-02-25  4:23   ` Vignesh Raghavendra
     [not found]     ` <99f7e23f-268d-f32b-086f-4a46fc232ce9-l0cyMroinI0@public.gmane.org>
2020-02-25  6:33       ` Ramuthevar, Vadivel MuruganX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=64b7ab12-0c11-df25-95e7-ee62227ec7ec@linux.intel.com \
    --to=vadivel.muruganx.ramuthevar-vuqaysv1563yd54fqh9/ca@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=cheol.yong.kim-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=dinguyen-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=marex-ynQEQJNshbs@public.gmane.org \
    --cc=qi-ming.wu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=simon.k.r.goldschmidt-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=tien.fong.chee-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=vigneshr-l0cyMroinI0@public.gmane.org \
    --subject='Re: [PATCH v10 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).