Linux-SPI Archive on lore.kernel.org
 help / color / Atom feed
From: dinghao.liu@zju.edu.cn
To: wqyoung <quanyang.wang@windriver.com>
Cc: kjlu@umn.edu, "Mark Brown" <broonie@kernel.org>,
	"Michal Simek" <michal.simek@xilinx.com>,
	linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: Re: [PATCH] [v2] spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probe
Date: Thu, 15 Apr 2021 13:27:22 +0800 (GMT+08:00)
Message-ID: <7b720ae6.58927.178d3ff88f3.Coremail.dinghao.liu@zju.edu.cn> (raw)
In-Reply-To: <20210415012158.GA2465158@pek-qwang2-d1>

> Hi Dinghao,
> On Mon, Apr 12, 2021 at 03:31:54PM +0800, Dinghao Liu wrote:
> > There is a PM usage counter decrement after zynqmp_qspi_init_hw()
> > without any refcount increment, which leads to refcount leak.Add
> > a refcount increment to balance the refcount. Also set
> > auto_runtime_pm to resume suspended spi controller.
> > 
> > Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
> > ---
> > changelog:
> > 
> > v2: - Add a refcount increment to fix refcout leak instead of the
> >       refcount decrement on error.
> >       Set ctlr->auto_runtime_pm = true.
> > ---
> >  drivers/spi/spi-zynqmp-gqspi.c | 2 ++
> >  1 file changed, 2 insertions(+)
> > 
> > diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c
> > index c8fa6ee18ae7..8b21c7b0e7eb 100644
> > --- a/drivers/spi/spi-zynqmp-gqspi.c
> > +++ b/drivers/spi/spi-zynqmp-gqspi.c
> > @@ -1160,6 +1160,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
> >  	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
> >  	pm_runtime_set_active(&pdev->dev);
> >  	pm_runtime_enable(&pdev->dev);
> > +	pm_runtime_get_sync(&pdev->dev);
> Please check the return value here, if ret is "< 0", goto error label,
> and a pm_runtime_put_sync is needed in error label
> >  	/* QSPI controller initializations */
> >  	zynqmp_qspi_init_hw(xqspi);
> >  
> > @@ -1187,6 +1188,7 @@ static int zynqmp_qspi_probe(struct platform_device *pdev)
> >  	ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_RX_DUAL | SPI_RX_QUAD |
> >  			    SPI_TX_DUAL | SPI_TX_QUAD;
> >  	ctlr->dev.of_node = np;
> > +	ctlr->auto_runtime_pm = true;
> >  
> >  	ret = devm_spi_register_controller(&pdev->dev, ctlr);
> >  	if (ret) {
> These 2 function
>      pm_runtime_mark_last_busy(&pdev->dev);
>       pm_runtime_put_autosuspend(&pdev->dev);
> are the last operations in probe function since if they runs,
> spi_controller will enter suspend state and disable clks after 3s
> passing. So please move them just before "return 0".
> 
> And would you please cc me when you send V3? I am preparing to send a patch series
> to fix clk and suspend/resume issues which bases on the pm_runtime issue.
> 

Thanks for your advice and I will send a new patch soon.

Regards,
Dinghao

      reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-12  7:31 Dinghao Liu
2021-04-15  1:21 ` wqyoung
2021-04-15  5:27   ` dinghao.liu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7b720ae6.58927.178d3ff88f3.Coremail.dinghao.liu@zju.edu.cn \
    --to=dinghao.liu@zju.edu.cn \
    --cc=broonie@kernel.org \
    --cc=kjlu@umn.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=quanyang.wang@windriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-SPI Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-spi/0 linux-spi/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-spi linux-spi/ https://lore.kernel.org/linux-spi \
		linux-spi@vger.kernel.org
	public-inbox-index linux-spi

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-spi


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git