Re: [PATCH v8 01/11] mfd: add driver for sequencer serial port

[Kevin Hilman <khilman@ti.com>]

Samuel,

Cyril Chemparathy <cyril@ti.com> writes:

> TI's sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port
> device.  It has a built-in programmable execution engine that can be programmed
> to operate as almost any serial bus (I2C, SPI, EasyScale, and others).
>
> This patch adds a driver for this controller device.  The driver does not
> expose a user-land interface.  Protocol drivers built on top of this layer are
> expected to remain in-kernel.
>
> Signed-off-by: Cyril Chemparathy <cyril@ti.com>

Any comments on this driver?

With your ack, I'll be happy to merge this via the davinci tree with the
rest of the series.

Thanks,

Kevin

> ---
>  drivers/mfd/Kconfig        |   11 +
>  drivers/mfd/Makefile       |    1 +
>  drivers/mfd/ti-ssp.c       |  476 ++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/ti_ssp.h |   87 ++++++++
>  4 files changed, 575 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/mfd/ti-ssp.c
>  create mode 100644 include/linux/mfd/ti_ssp.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 3a1493b..a4b4b70 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -81,6 +81,17 @@ config MFD_DM355EVM_MSP
>  	  boards.  MSP430 firmware manages resets and power sequencing,
>  	  inputs from buttons and the IR remote, LEDs, an RTC, and more.
>  
> +config MFD_TI_SSP
> +	tristate "TI Sequencer Serial Port support"
> +	depends on ARCH_DAVINCI_TNETV107X
> +	select MFD_CORE
> +	---help---
> +	  Say Y here if you want support for the Sequencer Serial Port
> +	  in a Texas Instruments TNETV107X SoC.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called ti-ssp.
> +
>  config HTC_EGPIO
>  	bool "HTC EGPIO support"
>  	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index f54b365..f64cf13 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
>  
>  obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
>  obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
> +obj-$(CONFIG_MFD_TI_SSP)	+= ti-ssp.o
>  
>  obj-$(CONFIG_MFD_STMPE)		+= stmpe.o
>  obj-$(CONFIG_MFD_TC35892)	+= tc35892.o
> diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c
> new file mode 100644
> index 0000000..af9ab0e
> --- /dev/null
> +++ b/drivers/mfd/ti-ssp.c
> @@ -0,0 +1,476 @@
> +/*
> + * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
> + *
> + * Copyright (C) 2010 Texas Instruments Inc
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/wait.h>
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/device.h>
> +#include <linux/spinlock.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/ti_ssp.h>
> +
> +/* Register Offsets */
> +#define REG_REV		0x00
> +#define REG_IOSEL_1	0x04
> +#define REG_IOSEL_2	0x08
> +#define REG_PREDIV	0x0c
> +#define REG_INTR_ST	0x10
> +#define REG_INTR_EN	0x14
> +#define REG_TEST_CTRL	0x18
> +
> +/* Per port registers */
> +#define PORT_CFG_2	0x00
> +#define PORT_ADDR	0x04
> +#define PORT_DATA	0x08
> +#define PORT_CFG_1	0x0c
> +#define PORT_STATE	0x10
> +
> +#define SSP_PORT_CONFIG_MASK	(SSP_EARLY_DIN | SSP_DELAY_DOUT)
> +#define SSP_PORT_CLKRATE_MASK	0x0f
> +
> +#define SSP_SEQRAM_WR_EN	BIT(4)
> +#define SSP_SEQRAM_RD_EN	BIT(5)
> +#define SSP_START		BIT(15)
> +#define SSP_BUSY		BIT(10)
> +#define SSP_PORT_ASL		BIT(7)
> +#define SSP_PORT_CFO1		BIT(6)
> +
> +#define SSP_PORT_SEQRAM_SIZE	32
> +
> +static const int ssp_port_base[]   = {0x040, 0x080};
> +static const int ssp_port_seqram[] = {0x100, 0x180};
> +
> +struct ti_ssp {
> +	struct resource		*res;
> +	struct device		*dev;
> +	void __iomem		*regs;
> +	spinlock_t		lock;
> +	struct clk		*clk;
> +	int			irq;
> +	wait_queue_head_t	wqh;
> +
> +	/*
> +	 * Some of the iosel2 register bits always read-back as 0, we need to
> +	 * remember these values so that we don't clobber previously set
> +	 * values.
> +	 */
> +	u32			iosel2;
> +};
> +
> +static inline struct ti_ssp *dev_to_ssp(struct device *dev)
> +{
> +	return dev_get_drvdata(dev->parent);
> +}
> +
> +static inline int dev_to_port(struct device *dev)
> +{
> +	return to_platform_device(dev)->id;
> +}
> +
> +/* Register Access Helpers, rmw() functions need to run locked */
> +static inline u32 ssp_read(struct ti_ssp *ssp, int reg)
> +{
> +	return __raw_readl(ssp->regs + reg);
> +}
> +
> +static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val)
> +{
> +	__raw_writel(val, ssp->regs + reg);
> +}
> +
> +static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits)
> +{
> +	ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits);
> +}
> +
> +static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg)
> +{
> +	return ssp_read(ssp, ssp_port_base[port] + reg);
> +}
> +
> +static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg,
> +				  u32 val)
> +{
> +	ssp_write(ssp, ssp_port_base[port] + reg, val);
> +}
> +
> +static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg,
> +				u32 mask, u32 bits)
> +{
> +	ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits);
> +}
> +
> +static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg,
> +				     u32 bits)
> +{
> +	ssp_port_rmw(ssp, port, reg, bits, 0);
> +}
> +
> +static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg,
> +				     u32 bits)
> +{
> +	ssp_port_rmw(ssp, port, reg, 0, bits);
> +}
> +
> +/* Called to setup port clock mode, caller must hold ssp->lock */
> +static int __set_mode(struct ti_ssp *ssp, int port, int mode)
> +{
> +	mode &= SSP_PORT_CONFIG_MASK;
> +	ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode);
> +
> +	return 0;
> +}
> +
> +int ti_ssp_set_mode(struct device *dev, int mode)
> +{
> +	struct ti_ssp *ssp = dev_to_ssp(dev);
> +	int port = dev_to_port(dev);
> +	int ret;
> +
> +	spin_lock(&ssp->lock);
> +	ret = __set_mode(ssp, port, mode);
> +	spin_unlock(&ssp->lock);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(ti_ssp_set_mode);
> +
> +/* Called to setup iosel2, caller must hold ssp->lock */
> +static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val)
> +{
> +	ssp->iosel2 = (ssp->iosel2 & ~mask) | val;
> +	ssp_write(ssp, REG_IOSEL_2, ssp->iosel2);
> +}
> +
> +/* Called to setup port iosel, caller must hold ssp->lock */
> +static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel)
> +{
> +	unsigned val, shift = port ? 16 : 0;
> +
> +	/* IOSEL1 gets the least significant 16 bits */
> +	val = ssp_read(ssp, REG_IOSEL_1);
> +	val &= 0xffff << (port ? 0 : 16);
> +	val |= (iosel & 0xffff) << (port ? 16 : 0);
> +	ssp_write(ssp, REG_IOSEL_1, val);
> +
> +	/* IOSEL2 gets the most significant 16 bits */
> +	val = (iosel >> 16) & 0x7;
> +	__set_iosel2(ssp, 0x7 << shift, val << shift);
> +}
> +
> +int ti_ssp_set_iosel(struct device *dev, u32 iosel)
> +{
> +	struct ti_ssp *ssp = dev_to_ssp(dev);
> +	int port = dev_to_port(dev);
> +
> +	spin_lock(&ssp->lock);
> +	__set_iosel(ssp, port, iosel);
> +	spin_unlock(&ssp->lock);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(ti_ssp_set_iosel);
> +
> +int ti_ssp_load(struct device *dev, int offs, u32* prog, int len)
> +{
> +	struct ti_ssp *ssp = dev_to_ssp(dev);
> +	int port = dev_to_port(dev);
> +	int i;
> +
> +	if (len > SSP_PORT_SEQRAM_SIZE)
> +		return -ENOSPC;
> +
> +	spin_lock(&ssp->lock);
> +
> +	/* Enable SeqRAM access */
> +	ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
> +
> +	/* Copy code */
> +	for (i = 0; i < len; i++) {
> +		__raw_writel(prog[i], ssp->regs + offs + 4*i +
> +			     ssp_port_seqram[port]);
> +	}
> +
> +	/* Disable SeqRAM access */
> +	ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
> +
> +	spin_unlock(&ssp->lock);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(ti_ssp_load);
> +
> +int ti_ssp_raw_read(struct device *dev)
> +{
> +	struct ti_ssp *ssp = dev_to_ssp(dev);
> +	int port = dev_to_port(dev);
> +	int shift = port ? 27 : 11;
> +
> +	return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf;
> +}
> +EXPORT_SYMBOL(ti_ssp_raw_read);
> +
> +int ti_ssp_raw_write(struct device *dev, u32 val)
> +{
> +	struct ti_ssp *ssp = dev_to_ssp(dev);
> +	int port = dev_to_port(dev), shift;
> +
> +	spin_lock(&ssp->lock);
> +
> +	shift = port ? 22 : 6;
> +	val &= 0xf;
> +	__set_iosel2(ssp, 0xf << shift, val << shift);
> +
> +	spin_unlock(&ssp->lock);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(ti_ssp_raw_write);
> +
> +static inline int __xfer_done(struct ti_ssp *ssp, int port)
> +{
> +	return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY);
> +}
> +
> +int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output)
> +{
> +	struct ti_ssp *ssp = dev_to_ssp(dev);
> +	int port = dev_to_port(dev);
> +	int ret;
> +
> +	if (pc & ~(0x3f))
> +		return -EINVAL;
> +
> +	/* Grab ssp->lock to serialize rmw on ssp registers */
> +	spin_lock(&ssp->lock);
> +
> +	ssp_port_write(ssp, port, PORT_ADDR, input >> 16);
> +	ssp_port_write(ssp, port, PORT_DATA, input & 0xffff);
> +	ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc);
> +
> +	/* grab wait queue head lock to avoid race with the isr */
> +	spin_lock_irq(&ssp->wqh.lock);
> +
> +	/* kick off sequence execution in hardware */
> +	ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START);
> +
> +	/* drop ssp lock; no register writes beyond this */
> +	spin_unlock(&ssp->lock);
> +
> +	ret = wait_event_interruptible_locked_irq(ssp->wqh,
> +						  __xfer_done(ssp, port));
> +	spin_unlock_irq(&ssp->wqh.lock);
> +
> +	if (ret < 0)
> +		return ret;
> +
> +	if (output) {
> +		*output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) |
> +			  (ssp_port_read(ssp, port, PORT_DATA) &  0xffff);
> +	}
> +
> +	ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL(ti_ssp_run);
> +
> +static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data)
> +{
> +	struct ti_ssp *ssp = dev_data;
> +
> +	spin_lock(&ssp->wqh.lock);
> +
> +	ssp_write(ssp, REG_INTR_ST, 0x3);
> +	wake_up_locked(&ssp->wqh);
> +
> +	spin_unlock(&ssp->wqh.lock);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int __devinit ti_ssp_probe(struct platform_device *pdev)
> +{
> +	static struct ti_ssp *ssp;
> +	const struct ti_ssp_data *pdata = pdev->dev.platform_data;
> +	int error = 0, prediv = 0xff, id;
> +	unsigned long sysclk;
> +	struct device *dev = &pdev->dev;
> +	struct mfd_cell cells[2];
> +
> +	ssp = kzalloc(sizeof(*ssp), GFP_KERNEL);
> +	if (!ssp) {
> +		dev_err(dev, "cannot allocate device info\n");
> +		return -ENOMEM;
> +	}
> +
> +	ssp->dev = dev;
> +	dev_set_drvdata(dev, ssp);
> +
> +	ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!ssp->res) {
> +		error = -ENODEV;
> +		dev_err(dev, "cannot determine register area\n");
> +		goto error_res;
> +	}
> +
> +	if (!request_mem_region(ssp->res->start, resource_size(ssp->res),
> +				pdev->name)) {
> +		error = -ENOMEM;
> +		dev_err(dev, "cannot claim register memory\n");
> +		goto error_res;
> +	}
> +
> +	ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res));
> +	if (!ssp->regs) {
> +		error = -ENOMEM;
> +		dev_err(dev, "cannot map register memory\n");
> +		goto error_map;
> +	}
> +
> +	ssp->clk = clk_get(dev, NULL);
> +	if (IS_ERR(ssp->clk)) {
> +		error = PTR_ERR(ssp->clk);
> +		dev_err(dev, "cannot claim device clock\n");
> +		goto error_clk;
> +	}
> +
> +	ssp->irq = platform_get_irq(pdev, 0);
> +	if (ssp->irq < 0) {
> +		error = -ENODEV;
> +		dev_err(dev, "unknown irq\n");
> +		goto error_irq;
> +	}
> +
> +	error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0,
> +				     dev_name(dev), ssp);
> +	if (error < 0) {
> +		dev_err(dev, "cannot acquire irq\n");
> +		goto error_irq;
> +	}
> +
> +	spin_lock_init(&ssp->lock);
> +	init_waitqueue_head(&ssp->wqh);
> +
> +	/* Power on and initialize SSP */
> +	error = clk_enable(ssp->clk);
> +	if (error) {
> +		dev_err(dev, "cannot enable device clock\n");
> +		goto error_enable;
> +	}
> +
> +	/* Reset registers to a sensible known state */
> +	ssp_write(ssp, REG_IOSEL_1, 0);
> +	ssp_write(ssp, REG_IOSEL_2, 0);
> +	ssp_write(ssp, REG_INTR_EN, 0x3);
> +	ssp_write(ssp, REG_INTR_ST, 0x3);
> +	ssp_write(ssp, REG_TEST_CTRL, 0);
> +	ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL);
> +	ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL);
> +	ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1);
> +	ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1);
> +
> +	sysclk = clk_get_rate(ssp->clk);
> +	if (pdata && pdata->out_clock)
> +		prediv = (sysclk / pdata->out_clock) - 1;
> +	prediv = clamp(prediv, 0, 0xff);
> +	ssp_rmw(ssp, REG_PREDIV, 0xff, prediv);
> +
> +	memset(cells, 0, sizeof(cells));
> +	for (id = 0; id < 2; id++) {
> +		const struct ti_ssp_dev_data *data = &pdata->dev_data[id];
> +
> +		cells[id].id		= id;
> +		cells[id].name		= data->dev_name;
> +		cells[id].platform_data	= data->pdata;
> +		cells[id].data_size	= data->pdata_size;
> +	}
> +
> +	error = mfd_add_devices(dev, 0, cells, 2, NULL, 0);
> +	if (error < 0) {
> +		dev_err(dev, "cannot add mfd cells\n");
> +		goto error_enable;
> +	}
> +
> +	return 0;
> +
> +error_enable:
> +	free_irq(ssp->irq, ssp);
> +error_irq:
> +	clk_put(ssp->clk);
> +error_clk:
> +	iounmap(ssp->regs);
> +error_map:
> +	release_mem_region(ssp->res->start, resource_size(ssp->res));
> +error_res:
> +	kfree(ssp);
> +	return error;
> +}
> +
> +static int __devexit ti_ssp_remove(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct ti_ssp *ssp = dev_get_drvdata(dev);
> +
> +	mfd_remove_devices(dev);
> +	clk_disable(ssp->clk);
> +	free_irq(ssp->irq, ssp);
> +	clk_put(ssp->clk);
> +	iounmap(ssp->regs);
> +	release_mem_region(ssp->res->start, resource_size(ssp->res));
> +	kfree(ssp);
> +	dev_set_drvdata(dev, NULL);
> +	return 0;
> +}
> +
> +static struct platform_driver ti_ssp_driver = {
> +	.probe		= ti_ssp_probe,
> +	.remove		= __devexit_p(ti_ssp_remove),
> +	.driver		= {
> +		.name	= "ti-ssp",
> +		.owner	= THIS_MODULE,
> +	}
> +};
> +
> +static int __init ti_ssp_init(void)
> +{
> +	return platform_driver_register(&ti_ssp_driver);
> +}
> +module_init(ti_ssp_init);
> +
> +static void __exit ti_ssp_exit(void)
> +{
> +	platform_driver_unregister(&ti_ssp_driver);
> +}
> +module_exit(ti_ssp_exit);
> +
> +MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver");
> +MODULE_AUTHOR("Cyril Chemparathy");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:ti-ssp");
> diff --git a/include/linux/mfd/ti_ssp.h b/include/linux/mfd/ti_ssp.h
> new file mode 100644
> index 0000000..021fe09
> --- /dev/null
> +++ b/include/linux/mfd/ti_ssp.h
> @@ -0,0 +1,87 @@
> +/*
> + * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
> + *
> + * Copyright (C) 2010 Texas Instruments Inc
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + */
> +
> +#ifndef __TI_SSP_H__
> +#define __TI_SSP_H__
> +
> +struct ti_ssp_dev_data {
> +	const char	*dev_name;
> +	void		*pdata;
> +	size_t		pdata_size;
> +};
> +
> +struct ti_ssp_data {
> +	unsigned long		out_clock;
> +	struct ti_ssp_dev_data	dev_data[2];
> +};
> +
> +/*
> + * Sequencer port IO pin configuration bits.  These do not correlate 1-1 with
> + * the hardware.  The iosel field in the port data combines iosel1 and iosel2,
> + * and is therefore not a direct map to register space.  It is best to use the
> + * macros below to construct iosel values.
> + *
> + * least significant 16 bits --> iosel1
> + * most significant 16 bits  --> iosel2
> + */
> +
> +#define SSP_IN			0x0000
> +#define SSP_DATA		0x0001
> +#define SSP_CLOCK		0x0002
> +#define SSP_CHIPSEL		0x0003
> +#define SSP_OUT			0x0004
> +#define SSP_PIN_SEL(pin, v)	((v) << ((pin) * 3))
> +#define SSP_PIN_MASK(pin)	SSP_PIN_SEL(pin, 0x7)
> +#define SSP_INPUT_SEL(pin)	((pin) << 16)
> +
> +/* Sequencer port config bits */
> +#define SSP_EARLY_DIN		BIT(8)
> +#define SSP_DELAY_DOUT		BIT(9)
> +
> +/* Sequence map definitions */
> +#define SSP_CLK_HIGH		BIT(0)
> +#define SSP_CLK_LOW		0
> +#define SSP_DATA_HIGH		BIT(1)
> +#define SSP_DATA_LOW		0
> +#define SSP_CS_HIGH		BIT(2)
> +#define SSP_CS_LOW		0
> +#define SSP_OUT_MODE		BIT(3)
> +#define SSP_IN_MODE		0
> +#define SSP_DATA_REG		BIT(4)
> +#define SSP_ADDR_REG		0
> +
> +#define SSP_OPCODE_DIRECT	((0x0) << 5)
> +#define SSP_OPCODE_TOGGLE	((0x1) << 5)
> +#define SSP_OPCODE_SHIFT	((0x2) << 5)
> +#define SSP_OPCODE_BRANCH0	((0x4) << 5)
> +#define SSP_OPCODE_BRANCH1	((0x5) << 5)
> +#define SSP_OPCODE_BRANCH	((0x6) << 5)
> +#define SSP_OPCODE_STOP		((0x7) << 5)
> +#define SSP_BRANCH(addr)	((addr) << 8)
> +#define SSP_COUNT(cycles)	((cycles) << 8)
> +
> +int ti_ssp_raw_read(struct device *dev);
> +int ti_ssp_raw_write(struct device *dev, u32 val);
> +int ti_ssp_load(struct device *dev, int offs, u32* prog, int len);
> +int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output);
> +int ti_ssp_set_mode(struct device *dev, int mode);
> +int ti_ssp_set_iosel(struct device *dev, u32 iosel);
> +
> +#endif /* __TI_SSP_H__ */