linux-spi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hoan Nguyen An <na-hoan@jinso.co.jp>,
	linux-renesas-soc@vger.kernel.org, linux-spi@vger.kernel.org,
	Mark Brown <broonie@kernel.org>
Subject: Applied "spi: rspi: Add support for LSB-first word order" to the spi tree
Date: Wed, 19 Feb 2020 00:11:27 +0000	[thread overview]
Message-ID: <applied-20200218105810.902-3-geert+renesas@glider.be> (raw)
In-Reply-To: <20200218105810.902-3-geert+renesas@glider.be>

The patch

   spi: rspi: Add support for LSB-first word order

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From c046f8fd83a902866ba3b122e9f57ca1c7de898c Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue, 18 Feb 2020 11:58:09 +0100
Subject: [PATCH] spi: rspi: Add support for LSB-first word order

All RSPI variants support selecting the word order.
Advertize support for LSB-first order, and act upon the flag being set.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200218105810.902-3-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/spi/spi-rspi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 7a1e6d524f34..aef05f2ac749 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -933,6 +933,8 @@ static int rspi_prepare_message(struct spi_controller *ctlr,
 		rspi->spcmd |= SPCMD_CPOL;
 	if (spi->mode & SPI_CPHA)
 		rspi->spcmd |= SPCMD_CPHA;
+	if (spi->mode & SPI_LSB_FIRST)
+		rspi->spcmd |= SPCMD_LSBF;
 
 	/* Configure slave signal to assert */
 	rspi->spcmd |= SPCMD_SSLA(spi->cs_gpiod ? rspi->ctlr->unused_native_cs
@@ -1255,7 +1257,8 @@ static int rspi_probe(struct platform_device *pdev)
 	ctlr->transfer_one = ops->transfer_one;
 	ctlr->prepare_message = rspi_prepare_message;
 	ctlr->unprepare_message = rspi_unprepare_message;
-	ctlr->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP | ops->extra_mode_bits;
+	ctlr->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST | SPI_LOOP |
+			  ops->extra_mode_bits;
 	ctlr->flags = ops->flags;
 	ctlr->dev.of_node = pdev->dev.of_node;
 	ctlr->use_gpio_descriptors = true;
-- 
2.20.1

      reply	other threads:[~2020-02-19  0:11 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-18 10:58 [PATCH 0/2] spi: rspi: Add support for configuring word order Geert Uytterhoeven
     [not found] ` <20200218105810.902-1-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2020-02-18 10:58   ` [PATCH 1/2] spi: rspi: Factor out handling of common mode bits Geert Uytterhoeven
2020-02-19  0:11     ` Applied "spi: rspi: Factor out handling of common mode bits" to the spi tree Mark Brown
2020-02-18 10:58 ` [PATCH 2/2] spi: rspi: Add support for LSB-first word order Geert Uytterhoeven
2020-02-19  0:11   ` Mark Brown [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=applied-20200218105810.902-3-geert+renesas@glider.be \
    --to=broonie@kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=na-hoan@jinso.co.jp \
    --subject='Re: Applied "spi: rspi: Add support for LSB-first word order" to the spi tree' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).