Re: [PATCH v2 3/4] MIPS: Loongson64: DTS: Add SPI support to LS7A

[Jiaxun Yang <jiaxun.yang@flygoat.com>]

在 2020/12/8 15:44, Qing Zhang 写道:
> add spi and amd node support.

Hi Qing,


Thanks for your patch.

What is AMD node?

Also given that different boards may have different flash, is it a wise

idea to hardcode here?

Thanks.

- Jiaxun


>
> Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
> ---
>
> v2:
> - Add spi about pci device DT
> ---
>   arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
>
> diff --git a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
> index f99a7a1..ab8836b 100644
> --- a/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
> +++ b/arch/mips/boot/dts/loongson/ls7a-pch.dtsi
> @@ -405,6 +405,26 @@
>   				interrupt-map-mask = <0 0 0 0>;
>   				interrupt-map = <0 0 0 0 &pic 39 IRQ_TYPE_LEVEL_HIGH>;
>   			};
> +
> +			spi@16,0 {
> +				compatible = "pci0014,7a0b.0",
> +						"pci0014,7a0b",
> +						"pciclass088000",
> +						"pciclass0880";
> +
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				reg = <0xb000 0x0 0x0 0x0 0x0>;
> +				num-chipselects = <0>;
> +				spiflash: s25fl016k@0 {
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				compatible ="spansion,s25fl016k","jedec,spi-nor";
> +				spi-max-frequency=<50000000>;
> +				reg=<0>;
> +				};
> +			};
>   		};
>   
>   		isa {