From: syzbot <syzbot+cc699626e48a6ebaf295@syzkaller.appspotmail.com>
To: Larry.Finger@lwfinger.net, florian.c.schilhabel@googlemail.com,
gregkh@linuxfoundation.org, hridayhegde1999@gmail.com,
linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev,
paskripkin@gmail.com, rkovhaev@gmail.com,
straube.linux@gmail.com, syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] KASAN: slab-out-of-bounds Read in do_wait_for_common
Date: Tue, 20 Jul 2021 08:21:06 -0700 [thread overview]
Message-ID: <00000000000047c76a05c78f9ab1@google.com> (raw)
In-Reply-To: <20210720141039.3d4ddcfe@gmail.com>
Hello,
syzbot has tested the proposed patch but the reproducer is still triggering an issue:
possible deadlock in flush_workqueue
usb 6-1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
usb 6-1: Direct firmware load for rtlwifi/rtl8712u.bin failed with error -2
usb 6-1: Falling back to sysfs fallback for: rtlwifi/rtl8712u.bin
usb 6-1: r8712u: Firmware request failed
============================================
WARNING: possible recursive locking detected
5.14.0-rc2-syzkaller #0 Not tainted
--------------------------------------------
kworker/0:3/3159 is trying to acquire lock:
ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: flush_workqueue+0x15c/0x1750 kernel/workqueue.c:2787
but task is already holding lock:
ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7aa/0x10c0 kernel/workqueue.c:2249
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((wq_completion)events);
lock((wq_completion)events);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by kworker/0:3/3159:
#0: ffff888011064d38 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x7aa/0x10c0 kernel/workqueue.c:2249
#1: ffffc900021d7d20 ((work_completion)(&fw_work->work)){+.+.}-{0:0}, at: process_one_work+0x7e8/0x10c0 kernel/workqueue.c:2251
#2: ffff8881467d4220 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:754 [inline]
#2: ffff8881467d4220 (&dev->mutex){....}-{3:3}, at: rtl871x_load_fw_fail drivers/staging/rtl8712/hal_init.c:43 [inline]
#2: ffff8881467d4220 (&dev->mutex){....}-{3:3}, at: rtl871x_load_fw_cb+0x102/0x130 drivers/staging/rtl8712/hal_init.c:56
#3: ffff8880363da220 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:754 [inline]
#3: ffff8880363da220 (&dev->mutex){....}-{3:3}, at: __device_driver_lock drivers/base/dd.c:1028 [inline]
#3: ffff8880363da220 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0xc1/0x7b0 drivers/base/dd.c:1229
#4: ffff8880308211a8 (&dev->mutex){....}-{3:3}, at: device_lock include/linux/device.h:754 [inline]
#4: ffff8880308211a8 (&dev->mutex){....}-{3:3}, at: __device_driver_lock drivers/base/dd.c:1028 [inline]
#4: ffff8880308211a8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0xc1/0x7b0 drivers/base/dd.c:1229
stack backtrace:
CPU: 0 PID: 3159 Comm: kworker/0:3 Not tainted 5.14.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events request_firmware_work_func
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1ae/0x29f lib/dump_stack.c:105
__lock_acquire+0x2615/0x6100 kernel/locking/lockdep.c:4853
lock_acquire+0x182/0x4a0 kernel/locking/lockdep.c:5625
flush_workqueue+0x178/0x1750 kernel/workqueue.c:2787
flush_scheduled_work include/linux/workqueue.h:597 [inline]
r871xu_dev_remove+0x159/0x420 drivers/staging/rtl8712/usb_intf.c:604
usb_unbind_interface+0x1f2/0x860 drivers/usb/core/driver.c:458
__device_release_driver drivers/base/dd.c:1201 [inline]
device_release_driver_internal+0x51e/0x7b0 drivers/base/dd.c:1232
bus_remove_device+0x2fd/0x410 drivers/base/bus.c:529
device_del+0x6e1/0xc10 drivers/base/core.c:3540
usb_disable_device+0x407/0x800 drivers/usb/core/message.c:1419
usb_set_configuration+0x42b/0x2100 drivers/usb/core/message.c:2027
usb_unbind_device+0x6b/0x170 drivers/usb/core/driver.c:309
__device_release_driver drivers/base/dd.c:1201 [inline]
device_release_driver_internal+0x51e/0x7b0 drivers/base/dd.c:1232
rtl871x_load_fw_fail drivers/staging/rtl8712/hal_init.c:45 [inline]
rtl871x_load_fw_cb+0x10a/0x130 drivers/staging/rtl8712/hal_init.c:56
request_firmware_work_func+0x175/0x250 drivers/base/firmware_loader/main.c:1081
process_one_work+0x833/0x10c0 kernel/workqueue.c:2276
worker_thread+0xac1/0x1320 kernel/workqueue.c:2422
kthread+0x453/0x480 kernel/kthread.c:319
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
Tested on:
commit: 8cae8cd8 seq_file: disallow extremely large seq buffer..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=149905f2300000
kernel config: https://syzkaller.appspot.com/x/.config?x=300aea483211c875
dashboard link: https://syzkaller.appspot.com/bug?extid=cc699626e48a6ebaf295
compiler: Debian clang version 11.0.1-2, GNU ld (GNU Binutils for Debian) 2.35.1
patch: https://syzkaller.appspot.com/x/patch.diff?x=15737b4a300000
next prev parent reply other threads:[~2021-07-20 15:21 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-19 13:42 [syzbot] KASAN: slab-out-of-bounds Read in do_wait_for_common syzbot
2021-07-20 11:10 ` Pavel Skripkin
2021-07-20 15:21 ` syzbot [this message]
2021-07-20 19:14 ` Pavel Skripkin
2021-07-20 22:10 ` syzbot
2021-07-21 9:57 ` Pavel Skripkin
2021-07-21 16:53 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00000000000047c76a05c78f9ab1@google.com \
--to=syzbot+cc699626e48a6ebaf295@syzkaller.appspotmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=florian.c.schilhabel@googlemail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hridayhegde1999@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=paskripkin@gmail.com \
--cc=rkovhaev@gmail.com \
--cc=straube.linux@gmail.com \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).