linux-staging.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: Phillip Potter <phil@philpotter.co.uk>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, dan.carpenter@oracle.com,
	linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev
Subject: [PATCH 06/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_pwrctrl.c
Date: Tue, 15 Jun 2021 01:14:45 +0100	[thread overview]
Message-ID: <20210615001507.1171-7-phil@philpotter.co.uk> (raw)
In-Reply-To: <20210615001507.1171-1-phil@philpotter.co.uk>

Remove all DBG_88E calls from core/rtw_pwrctrl.c as this macro is
unnecessary, and many of these calls are dubious in terms of necessity.
Removing all calls will ultimately allow the removal of the macro
itself. Also remove pmlmepriv declaration from within rtw_ps_processor
as it is now no longer used.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
---
 drivers/staging/rtl8188eu/core/rtw_pwrctrl.c | 40 +-------------------
 1 file changed, 2 insertions(+), 38 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c b/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
index 4d507d9faec2..f6fe43e0965d 100644
--- a/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
+++ b/drivers/staging/rtl8188eu/core/rtw_pwrctrl.c
@@ -18,17 +18,12 @@ static int rtw_hw_suspend(struct adapter *padapter)
 	struct net_device *pnetdev = padapter->pnetdev;
 
 	if ((!padapter->bup) || (padapter->bDriverStopped) ||
-	    (padapter->bSurpriseRemoved)) {
-		DBG_88E("padapter->bup=%d bDriverStopped=%d bSurpriseRemoved = %d\n",
-			padapter->bup, padapter->bDriverStopped,
-			padapter->bSurpriseRemoved);
+	    (padapter->bSurpriseRemoved))
 		goto error_exit;
-	}
 
 	/* system suspend */
 	LeaveAllPowerSaveMode(padapter);
 
-	DBG_88E("==> %s\n", __func__);
 	mutex_lock(&pwrpriv->mutex_lock);
 	pwrpriv->bips_processing = true;
 	/* s1. */
@@ -69,7 +64,6 @@ static int rtw_hw_suspend(struct adapter *padapter)
 	return 0;
 
 error_exit:
-	DBG_88E("%s, failed\n", __func__);
 	return -1;
 }
 
@@ -79,7 +73,6 @@ static int rtw_hw_resume(struct adapter *padapter)
 	struct net_device *pnetdev = padapter->pnetdev;
 
 	/* system resume */
-	DBG_88E("==> %s\n", __func__);
 	mutex_lock(&pwrpriv->mutex_lock);
 	pwrpriv->bips_processing = true;
 	rtw_reset_drv_sw(padapter);
@@ -107,7 +100,6 @@ static int rtw_hw_resume(struct adapter *padapter)
 
 	return 0;
 error_exit:
-	DBG_88E("%s, Open net dev failed\n", __func__);
 	return -1;
 }
 
@@ -135,7 +127,6 @@ void ips_enter(struct adapter *padapter)
 	pwrpriv->ips_mode = pwrpriv->ips_mode_req;
 
 	pwrpriv->ips_enter_cnts++;
-	DBG_88E("==>%s:%d\n", __func__, pwrpriv->ips_enter_cnts);
 	if (rf_off == pwrpriv->change_rfpwrstate) {
 		pwrpriv->bpower_saving = true;
 		DBG_88E_LEVEL(_drv_info_, "nolinked power save enter\n");
@@ -165,7 +156,6 @@ int ips_leave(struct adapter *padapter)
 		pwrpriv->bips_processing = true;
 		pwrpriv->change_rfpwrstate = rf_on;
 		pwrpriv->ips_leave_cnts++;
-		DBG_88E("==>%s:%d\n", __func__, pwrpriv->ips_leave_cnts);
 
 		result = rtw_ips_pwr_up(padapter);
 		if (result == _SUCCESS)
@@ -174,7 +164,6 @@ int ips_leave(struct adapter *padapter)
 		DBG_88E_LEVEL(_drv_info_, "nolinked power save leave\n");
 
 		if ((psecuritypriv->dot11PrivacyAlgrthm == _WEP40_) || (psecuritypriv->dot11PrivacyAlgrthm == _WEP104_)) {
-			DBG_88E("==>%s, channel(%d), processing(%x)\n", __func__, padapter->mlmeextpriv.cur_channel, pwrpriv->bips_processing);
 			set_channel_bwmode(padapter, padapter->mlmeextpriv.cur_channel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
 			for (keyid = 0; keyid < 4; keyid++) {
 				if (pmlmepriv->key_mask & BIT(keyid)) {
@@ -186,7 +175,6 @@ int ips_leave(struct adapter *padapter)
 			}
 		}
 
-		DBG_88E("==> %s.....LED(0x%08x)...\n", __func__, usb_read32(padapter, 0x4c));
 		pwrpriv->bips_processing = false;
 
 		pwrpriv->bkeepfwalive = false;
@@ -217,7 +205,6 @@ static bool rtw_pwr_unassociated_idle(struct adapter *adapter)
 void rtw_ps_processor(struct adapter *padapter)
 {
 	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
-	struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
 	enum rt_rf_power_state rfpwrstate;
 
 	pwrpriv->ps_processing = true;
@@ -227,7 +214,6 @@ void rtw_ps_processor(struct adapter *padapter)
 
 	if (padapter->pwrctrlpriv.bHWPwrPindetect) {
 		rfpwrstate = RfOnOffDetect(padapter);
-		DBG_88E("@@@@- #2  %s==> rfstate:%s\n", __func__, (rfpwrstate == rf_on) ? "rf_on" : "rf_off");
 
 		if (rfpwrstate != pwrpriv->rf_pwrstate) {
 			if (rfpwrstate == rf_off) {
@@ -238,7 +224,6 @@ void rtw_ps_processor(struct adapter *padapter)
 				pwrpriv->change_rfpwrstate = rf_on;
 				rtw_hw_resume(padapter);
 			}
-			DBG_88E("current rf_pwrstate(%s)\n", (pwrpriv->rf_pwrstate == rf_off) ? "rf_off" : "rf_on");
 		}
 		pwrpriv->pwr_state_check_cnts++;
 	}
@@ -250,7 +235,6 @@ void rtw_ps_processor(struct adapter *padapter)
 		goto exit;
 
 	if ((pwrpriv->rf_pwrstate == rf_on) && ((pwrpriv->pwr_state_check_cnts % 4) == 0)) {
-		DBG_88E("==>%s .fw_state(%x)\n", __func__, get_fwstate(pmlmepriv));
 		pwrpriv->change_rfpwrstate = rf_off;
 
 		ips_enter(padapter);
@@ -349,10 +333,8 @@ static u8 PS_RDY_CHECK(struct adapter *padapter)
 	if (pwrpriv->bInSuspend)
 		return false;
 	if (padapter->securitypriv.dot11AuthAlgrthm == dot11AuthAlgrthm_8021X &&
-	    !padapter->securitypriv.binstallGrpkey) {
-		DBG_88E("Group handshake still in progress !!!\n");
+	    !padapter->securitypriv.binstallGrpkey)
 		return false;
-	}
 	return true;
 }
 
@@ -381,7 +363,6 @@ void rtw_set_ps_mode(struct adapter *padapter, u8 ps_mode, u8 smart_ps, u8 bcn_a
 	/* if (pwrpriv->pwr_mode == PS_MODE_ACTIVE) */
 	if (ps_mode == PS_MODE_ACTIVE) {
 		if (PS_RDY_CHECK(padapter)) {
-			DBG_88E("%s: Enter 802.11 power save\n", __func__);
 			pwrpriv->bFwCurrentInPSMode = true;
 			pwrpriv->pwr_mode = ps_mode;
 			pwrpriv->smart_ps = smart_ps;
@@ -412,13 +393,11 @@ s32 LPS_RF_ON_check(struct adapter *padapter, u32 delay_ms)
 
 		if (padapter->bSurpriseRemoved) {
 			err = -2;
-			DBG_88E("%s: device surprise removed!!\n", __func__);
 			break;
 		}
 
 		if (jiffies_to_msecs(jiffies - start_time) > delay_ms) {
 			err = -1;
-			DBG_88E("%s: Wait for FW LPS leave more than %u ms!!!\n", __func__, delay_ms);
 			break;
 		}
 		msleep(1);
@@ -443,7 +422,6 @@ void LPS_Enter(struct adapter *padapter)
 		if (pwrpriv->LpsIdleCount >= 2) { /*   4 Sec */
 			if (pwrpriv->pwr_mode == PS_MODE_ACTIVE) {
 				pwrpriv->bpower_saving = true;
-				DBG_88E("%s smart_ps:%d\n", __func__, pwrpriv->smart_ps);
 				/* For Tenda W311R IOT issue */
 				rtw_set_ps_mode(padapter, pwrpriv->power_mgnt, pwrpriv->smart_ps, 0);
 			}
@@ -549,14 +527,9 @@ int _rtw_pwr_wakeup(struct adapter *padapter, u32 ips_deffer_ms, const char *cal
 
 	start = jiffies;
 	if (pwrpriv->ps_processing) {
-		DBG_88E("%s wait ps_processing...\n", __func__);
 		while (pwrpriv->ps_processing &&
 		       jiffies_to_msecs(jiffies - start) <= 3000)
 			udelay(1500);
-		if (pwrpriv->ps_processing)
-			DBG_88E("%s wait ps_processing timeout\n", __func__);
-		else
-			DBG_88E("%s wait ps_processing done\n", __func__);
 	}
 
 	/* System suspend is not allowed to wakeup */
@@ -577,9 +550,7 @@ int _rtw_pwr_wakeup(struct adapter *padapter, u32 ips_deffer_ms, const char *cal
 		goto exit;
 	}
 	if (rf_off == pwrpriv->rf_pwrstate) {
-		DBG_88E("%s call ips_leave....\n", __func__);
 		if (ips_leave(padapter) ==  _FAIL) {
-			DBG_88E("======> ips_leave fail.............\n");
 			ret = _FAIL;
 			goto exit;
 		}
@@ -588,11 +559,6 @@ int _rtw_pwr_wakeup(struct adapter *padapter, u32 ips_deffer_ms, const char *cal
 	/* TODO: the following checking need to be merged... */
 	if (padapter->bDriverStopped || !padapter->bup ||
 	    !padapter->hw_init_completed) {
-		DBG_88E("%s: bDriverStopped=%d, bup=%d, hw_init_completed =%u\n"
-			, caller
-			, padapter->bDriverStopped
-			, padapter->bup
-			, padapter->hw_init_completed);
 		ret = false;
 		goto exit;
 	}
@@ -631,11 +597,9 @@ int rtw_pm_set_ips(struct adapter *padapter, u8 mode)
 
 	if (mode == IPS_NORMAL || mode == IPS_LEVEL_2) {
 		rtw_ips_mode_req(pwrctrlpriv, mode);
-		DBG_88E("%s %s\n", __func__, mode == IPS_NORMAL ? "IPS_NORMAL" : "IPS_LEVEL_2");
 		return 0;
 	} else if (mode == IPS_NONE) {
 		rtw_ips_mode_req(pwrctrlpriv, mode);
-		DBG_88E("%s %s\n", __func__, "IPS_NONE");
 		if ((padapter->bSurpriseRemoved == 0) && (rtw_pwr_wakeup(padapter) == _FAIL))
 			return -EFAULT;
 	} else {
-- 
2.30.2


  parent reply	other threads:[~2021-06-15  0:15 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-15  0:14 [PATCH 00/28] staging: rtl8188eu: remove DBG_88E callers and macro Phillip Potter
2021-06-15  0:14 ` [PATCH 01/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_efuse.c Phillip Potter
2021-06-15  0:14 ` [PATCH 02/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_xmit.c Phillip Potter
2021-06-15  0:14 ` [PATCH 03/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_mlme_ext.c Phillip Potter
2021-06-15 10:32   ` Dan Carpenter
2021-06-15 21:15     ` Phillip Potter
2021-06-15  0:14 ` [PATCH 04/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_wlan_util.c Phillip Potter
2021-06-15  0:14 ` [PATCH 05/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_ap.c Phillip Potter
2021-06-15  0:14 ` Phillip Potter [this message]
2021-06-15  0:14 ` [PATCH 07/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_ieee80211.c Phillip Potter
2021-06-15  0:14 ` [PATCH 08/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_security.c Phillip Potter
2021-06-15  0:14 ` [PATCH 09/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_ioctl_set.c Phillip Potter
2021-06-15  0:14 ` [PATCH 10/28] staging: rtl8188eu: remove all DBG_88E calls from core/rtw_mlme.c Phillip Potter
2021-06-15  0:14 ` [PATCH 11/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/ioctl_linux.c Phillip Potter
2021-06-15  0:14 ` [PATCH 12/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/usb_intf.c Phillip Potter
2021-06-15  0:14 ` [PATCH 13/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/os_intfs.c Phillip Potter
2021-06-15  0:14 ` [PATCH 14/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/mlme_linux.c Phillip Potter
2021-06-15  0:14 ` [PATCH 15/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/xmit_linux.c Phillip Potter
2021-06-15  0:14 ` [PATCH 16/28] staging: rtl8188eu: remove all DBG_88E calls from os_dep/rtw_android.c Phillip Potter
2021-06-15  0:14 ` [PATCH 17/28] staging: rtl8188eu: remove all DBG_88E calls from hal/hal_intf.c Phillip Potter
2021-06-15  0:14 ` [PATCH 18/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188e_cmd.c Phillip Potter
2021-06-15  0:14 ` [PATCH 19/28] staging: rtl8188eu: remove all DBG_88E calls from hal/pwrseqcmd.c Phillip Potter
2021-06-15  0:14 ` [PATCH 20/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188e_hal_init.c Phillip Potter
2021-06-15  0:15 ` [PATCH 21/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188e_xmit.c Phillip Potter
2021-06-15  0:15 ` [PATCH 22/28] staging: rtl8188eu: remove all DBG_88E calls from hal/usb_halinit.c Phillip Potter
2021-06-15 12:41   ` Dan Carpenter
2021-06-15 21:08     ` Phillip Potter
2021-06-15  0:15 ` [PATCH 23/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188eu_recv.c Phillip Potter
2021-06-15  0:15 ` [PATCH 24/28] staging: rtl8188eu: remove all DBG_88E calls from hal/rtl8188eu_xmit.c Phillip Potter
2021-06-15  0:15 ` [PATCH 25/28] staging: rtl8188eu: remove converted netdev_dbg calls from core/rtw_recv.c Phillip Potter
2021-06-15  0:15 ` [PATCH 26/28] staging: rtl8188eu: remove converted netdev_dbg calls from core/rtw_sta_mgt.c Phillip Potter
2021-06-15  0:15 ` [PATCH 27/28] staging: rtl8188eu: remove core/rtw_debug.c Phillip Potter
2021-06-15  0:15 ` [PATCH 28/28] staging: rtl8188eu: remove DBG_88E macro definition Phillip Potter
2021-06-15 11:57 ` [PATCH 00/28] staging: rtl8188eu: remove DBG_88E callers and macro Greg KH
2021-06-15 21:05   ` Phillip Potter
2021-06-15 12:51 ` Dan Carpenter
2021-06-15 21:10   ` Phillip Potter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210615001507.1171-7-phil@philpotter.co.uk \
    --to=phil@philpotter.co.uk \
    --cc=Larry.Finger@lwfinger.net \
    --cc=dan.carpenter@oracle.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).