linux-staging.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Martin Kepplinger <martin.kepplinger@puri.sm>
Cc: slongerbeam@gmail.com, p.zabel@pengutronix.de,
	mchehab@kernel.org, gregkh@linuxfoundation.org,
	shawnguo@kernel.org, kernel@pengutronix.de, festevam@gmail.com,
	linux-imx@nxp.com, linux-media@vger.kernel.org,
	linux-staging@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@puri.sm
Subject: Re: [PATCH v2 2/2] media: imx: imx8mq-mipi-csi2: remove unneeded state variable and function
Date: Sun, 12 Mar 2023 15:37:06 +0200	[thread overview]
Message-ID: <20230312133706.GJ2545@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20230307150047.1486186-3-martin.kepplinger@puri.sm>

Hi Martin,

Thank you for the patch.

On Tue, Mar 07, 2023 at 04:00:47PM +0100, Martin Kepplinger wrote:
> Clean up the driver a bit by inlining the imx8mq_mipi_csi_system_enable()
> function to the callsites and removing the hs_settle variable from the
> driver state.
> 
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Could I volunteer you to also drop the struct csi_state state field ?
:-)

> ---
>  drivers/staging/media/imx/imx8mq-mipi-csi2.c | 41 ++++++++------------
>  1 file changed, 16 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/staging/media/imx/imx8mq-mipi-csi2.c b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
> index 1aa8622a3bae..f10b59b8f1c0 100644
> --- a/drivers/staging/media/imx/imx8mq-mipi-csi2.c
> +++ b/drivers/staging/media/imx/imx8mq-mipi-csi2.c
> @@ -119,9 +119,8 @@ struct csi_state {
>  
>  	struct v4l2_mbus_config_mipi_csi2 bus;
>  
> -	struct mutex lock; /* Protect state and hs_settle */
> +	struct mutex lock; /* Protect state */
>  	u32 state;
> -	u32 hs_settle;
>  
>  	struct regmap *phy_gpr;
>  	u8 phy_gpr_reg;
> @@ -264,23 +263,6 @@ static int imx8mq_mipi_csi_sw_reset(struct csi_state *state)
>  	return 0;
>  }
>  
> -static void imx8mq_mipi_csi_system_enable(struct csi_state *state, int on)
> -{
> -	if (!on) {
> -		imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
> -		return;
> -	}
> -
> -	regmap_update_bits(state->phy_gpr,
> -			   state->phy_gpr_reg,
> -			   0x3fff,
> -			   GPR_CSI2_1_RX_ENABLE |
> -			   GPR_CSI2_1_VID_INTFC_ENB |
> -			   GPR_CSI2_1_HSEL |
> -			   GPR_CSI2_1_CONT_CLK_MODE |
> -			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(state->hs_settle));
> -}
> -
>  static void imx8mq_mipi_csi_set_params(struct csi_state *state)
>  {
>  	int lanes = state->bus.num_data_lanes;
> @@ -321,7 +303,8 @@ static int imx8mq_mipi_csi_clk_get(struct csi_state *state)
>  }
>  
>  static int imx8mq_mipi_csi_calc_hs_settle(struct csi_state *state,
> -					  struct v4l2_subdev_state *sd_state)
> +					  struct v4l2_subdev_state *sd_state,
> +					  u32 *hs_settle)
>  {
>  	s64 link_freq;
>  	u32 lane_rate;
> @@ -377,10 +360,10 @@ static int imx8mq_mipi_csi_calc_hs_settle(struct csi_state *state,
>  	max_ths_settle = 140 + 10 * 1000000 / (lane_rate / 1000);
>  	ths_settle_ns = (min_ths_settle + max_ths_settle) / 2;
>  
> -	state->hs_settle = ths_settle_ns / esc_clk_period_ns - 1;
> +	*hs_settle = ths_settle_ns / esc_clk_period_ns - 1;
>  
>  	dev_dbg(state->dev, "lane rate %u Ths_settle %u hs_settle %u\n",
> -		lane_rate, ths_settle_ns, state->hs_settle);
> +		lane_rate, ths_settle_ns, *hs_settle);
>  
>  	return 0;
>  }
> @@ -389,24 +372,32 @@ static int imx8mq_mipi_csi_start_stream(struct csi_state *state,
>  					struct v4l2_subdev_state *sd_state)
>  {
>  	int ret;
> +	u32 hs_settle;
>  
>  	ret = imx8mq_mipi_csi_sw_reset(state);
>  	if (ret)
>  		return ret;
>  
>  	imx8mq_mipi_csi_set_params(state);
> -	ret = imx8mq_mipi_csi_calc_hs_settle(state, sd_state);
> +	ret = imx8mq_mipi_csi_calc_hs_settle(state, sd_state, &hs_settle);
>  	if (ret)
>  		return ret;
>  
> -	imx8mq_mipi_csi_system_enable(state, true);
> +	regmap_update_bits(state->phy_gpr,
> +			   state->phy_gpr_reg,
> +			   0x3fff,
> +			   GPR_CSI2_1_RX_ENABLE |
> +			   GPR_CSI2_1_VID_INTFC_ENB |
> +			   GPR_CSI2_1_HSEL |
> +			   GPR_CSI2_1_CONT_CLK_MODE |
> +			   GPR_CSI2_1_S_PRG_RXHS_SETTLE(hs_settle));
>  
>  	return 0;
>  }
>  
>  static void imx8mq_mipi_csi_stop_stream(struct csi_state *state)
>  {
> -	imx8mq_mipi_csi_system_enable(state, false);
> +	imx8mq_mipi_csi_write(state, CSI2RX_CFG_DISABLE_DATA_LANES, 0xf);
>  }
>  
>  /* -----------------------------------------------------------------------------

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2023-03-12 13:37 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-07 15:00 [PATCH v2 0/2] media: imx: imx8mq-mipi-csi2: Use V4L2 subdev state Martin Kepplinger
2023-03-07 15:00 ` [PATCH v2 1/2] media: imx: imx8mq-mipi-csi2: Use V4L2 subdev active state Martin Kepplinger
2023-03-12 13:31   ` Laurent Pinchart
2023-03-12 13:39     ` Laurent Pinchart
2023-03-12 14:05       ` Martin Kepplinger
2023-03-07 15:00 ` [PATCH v2 2/2] media: imx: imx8mq-mipi-csi2: remove unneeded state variable and function Martin Kepplinger
2023-03-12 13:37   ` Laurent Pinchart [this message]
2023-03-12 14:04     ` Martin Kepplinger
2023-03-25  9:59       ` Martin Kepplinger
2023-03-25 18:49         ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230312133706.GJ2545@pendragon.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=festevam@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kernel@pengutronix.de \
    --cc=kernel@puri.sm \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=martin.kepplinger@puri.sm \
    --cc=mchehab@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=slongerbeam@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).