[PATCH v5 00/25] media: use pm_runtime_resume_and_get() on non-i2c drivers

[PATCH v5 00/25] media: use pm_runtime_resume_and_get() on non-i2c drivers

[Mauro Carvalho Chehab]

Dealing with PM runtime (RPM) is different than dealing with other kAPIs used
on media, as most pm_runtime_get_*() functions won't return to the the state
before the call if an error rises. They, instead, increment an usage_count.

Due to that, there were several bugs on media. Just on this review, we found
24 such errors.

So, let's use pm_runtime_resume_and_get() whenever possible, as it
has two advantages over :

1. On errors, it decrements the usage count;
2. It always return zero on success or an error code. This prevents a
   common error pattern of checking if ret is not zero to identify
   for errors.

There are however a few places where calls to pm_runtime_get_sync()
are kept. On several of those, a comment was added, in order to
help preventing trivial patches that could try to change them.

PS.: This series was submitted already together with the fix patches
at:

   	https://lore.kernel.org/linux-media/cover.1619621413.git.mchehab+huawei@kernel.org/

I opted to break it on 3 parts, in order to make easier to review.

This is the third (and final) part.

Mauro Carvalho Chehab (25):
  staging: media: imx7-mipi-csis: use pm_runtime_resume_and_get()
  staging: media: atomisp: use pm_runtime_resume_and_get()
  staging: media: ipu3: use pm_runtime_resume_and_get()
  staging: media: cedrus_video: use pm_runtime_resume_and_get()
  staging: media: tegra-vde: use pm_runtime_resume_and_get()
  staging: media: tegra-video: use pm_runtime_resume_and_get()
  media: rockchip/rga: use pm_runtime_resume_and_get()
  media: sti/hva: use pm_runtime_resume_and_get()
  media: ipu3: use pm_runtime_resume_and_get()
  media: coda: use pm_runtime_resume_and_get()
  media: mtk-jpeg: use pm_runtime_resume_and_get()
  media: camss: use pm_runtime_resume_and_get()
  media: venus: core: use pm_runtime_resume_and_get()
  media: venus: vdec: use pm_runtime_resume_and_get()
  media: venus: venc: use pm_runtime_resume_and_get()
  media: rcar-fcp: use pm_runtime_resume_and_get()
  media: rkisp1: use pm_runtime_resume_and_get()
  media: s3c-camif: use pm_runtime_resume_and_get()
  media: s5p-mfc: use pm_runtime_resume_and_get()
  media: stm32: use pm_runtime_resume_and_get()
  media: sunxi: use pm_runtime_resume_and_get()
  media: ti-vpe: use pm_runtime_resume_and_get()
  media: vsp1: use pm_runtime_resume_and_get()
  media: rcar-vin: use pm_runtime_resume_and_get()
  media: hantro: use pm_runtime_resume_and_get()

 drivers/media/pci/intel/ipu3/ipu3-cio2-main.c |  3 +--
 drivers/media/platform/coda/coda-common.c     |  7 ++++---
 .../media/platform/mtk-jpeg/mtk_jpeg_core.c   |  4 ++--
 .../media/platform/qcom/camss/camss-csid.c    |  6 ++----
 .../media/platform/qcom/camss/camss-csiphy.c  |  6 ++----
 .../media/platform/qcom/camss/camss-ispif.c   |  6 ++----
 drivers/media/platform/qcom/camss/camss-vfe.c |  5 +++--
 .../media/platform/qcom/venus/pm_helpers.c    |  3 +--
 drivers/media/platform/qcom/venus/vdec.c      |  6 +++---
 drivers/media/platform/qcom/venus/venc.c      |  5 +++--
 drivers/media/platform/rcar-fcp.c             |  8 +------
 drivers/media/platform/rcar-vin/rcar-csi2.c   | 15 ++++++++++---
 drivers/media/platform/rcar-vin/rcar-dma.c    |  6 ++----
 drivers/media/platform/rcar-vin/rcar-v4l2.c   |  6 ++----
 drivers/media/platform/rockchip/rga/rga-buf.c |  3 +--
 drivers/media/platform/rockchip/rga/rga.c     |  4 +++-
 .../platform/rockchip/rkisp1/rkisp1-capture.c |  3 +--
 .../media/platform/s3c-camif/camif-capture.c  |  2 +-
 drivers/media/platform/s3c-camif/camif-core.c |  5 +++--
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c   |  6 ++----
 drivers/media/platform/sti/hva/hva-hw.c       | 17 ++++++++-------
 drivers/media/platform/stm32/stm32-dcmi.c     |  5 +++--
 .../platform/sunxi/sun4i-csi/sun4i_v4l2.c     |  6 ++++--
 drivers/media/platform/ti-vpe/cal-video.c     |  4 +++-
 drivers/media/platform/ti-vpe/cal.c           |  8 ++++---
 drivers/media/platform/ti-vpe/vpe.c           |  8 +++----
 drivers/media/platform/vsp1/vsp1_drv.c        | 10 +--------
 .../staging/media/atomisp/pci/atomisp_fops.c  |  6 +++---
 drivers/staging/media/hantro/hantro_drv.c     |  5 ++---
 drivers/staging/media/imx/imx7-mipi-csis.c    |  7 +++----
 drivers/staging/media/ipu3/ipu3.c             |  3 +--
 .../staging/media/sunxi/cedrus/cedrus_video.c |  6 ++----
 drivers/staging/media/tegra-vde/vde.c         | 21 ++++++++++++++++---
 drivers/staging/media/tegra-video/csi.c       |  3 +--
 drivers/staging/media/tegra-video/vi.c        |  3 +--
 35 files changed, 110 insertions(+), 111 deletions(-)

-- 
2.30.2

[PATCH v5 01/25] staging: media: imx7-mipi-csis: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 025fdc488bd6..1dc680d94a46 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -695,11 +695,10 @@ static int mipi_csis_s_stream(struct v4l2_subdev *mipi_sd, int enable)
 
 		mipi_csis_clear_counters(state);
 
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		ret = v4l2_subdev_call(state->src_sd, core, s_power, 1);
 		if (ret < 0 && ret != -ENOIOCTLCMD)
 			goto done;
-- 
2.30.2

[PATCH v5 02/25] staging: media: atomisp: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Besides that, the de-init order in case of css error was wrong.
This change should also fix that.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/atomisp/pci/atomisp_fops.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/atomisp/pci/atomisp_fops.c b/drivers/staging/media/atomisp/pci/atomisp_fops.c
index f1e6b2597853..26d05474a035 100644
--- a/drivers/staging/media/atomisp/pci/atomisp_fops.c
+++ b/drivers/staging/media/atomisp/pci/atomisp_fops.c
@@ -837,7 +837,7 @@ static int atomisp_open(struct file *file)
 	}
 
 	/* runtime power management, turn on ISP */
-	ret = pm_runtime_get_sync(vdev->v4l2_dev->dev);
+	ret = pm_runtime_resume_and_get(vdev->v4l2_dev->dev);
 	if (ret < 0) {
 		dev_err(isp->dev, "Failed to power on device\n");
 		goto error;
@@ -881,9 +881,9 @@ static int atomisp_open(struct file *file)
 
 css_error:
 	atomisp_css_uninit(isp);
-error:
-	hmm_pool_unregister(HMM_POOL_TYPE_DYNAMIC);
 	pm_runtime_put(vdev->v4l2_dev->dev);
+error:
+	hmm_pool_unregister(HMM_POOL_TYPE_DYNAMIC);
 	rt_mutex_unlock(&isp->mutex);
 	return ret;
 }
-- 
2.30.2

[PATCH v5 03/25] staging: media: ipu3: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/ipu3/ipu3.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/staging/media/ipu3/ipu3.c b/drivers/staging/media/ipu3/ipu3.c
index ee1bba6bdcac..8e1e9e46e604 100644
--- a/drivers/staging/media/ipu3/ipu3.c
+++ b/drivers/staging/media/ipu3/ipu3.c
@@ -392,10 +392,9 @@ int imgu_s_stream(struct imgu_device *imgu, int enable)
 	}
 
 	/* Set Power */
-	r = pm_runtime_get_sync(dev);
+	r = pm_runtime_resume_and_get(dev);
 	if (r < 0) {
 		dev_err(dev, "failed to set imgu power\n");
-		pm_runtime_put(dev);
 		return r;
 	}
 
-- 
2.30.2

[PATCH v5 04/25] staging: media: cedrus_video: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus_video.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
index b62eb8e84057..9ddd789d0b1f 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -490,11 +490,9 @@ static int cedrus_start_streaming(struct vb2_queue *vq, unsigned int count)
 	}
 
 	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
-		ret = pm_runtime_get_sync(dev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(dev->dev);
+		ret = pm_runtime_resume_and_get(dev->dev);
+		if (ret < 0)
 			goto err_cleanup;
-		}
 
 		if (dev->dec_ops[ctx->current_codec]->start) {
 			ret = dev->dec_ops[ctx->current_codec]->start(ctx);
-- 
2.30.2

[PATCH v5 05/25] staging: media: tegra-vde: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/tegra-vde/vde.c | 21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/tegra-vde/vde.c b/drivers/staging/media/tegra-vde/vde.c
index 28845b5bafaf..e025b69776f2 100644
--- a/drivers/staging/media/tegra-vde/vde.c
+++ b/drivers/staging/media/tegra-vde/vde.c
@@ -775,9 +775,9 @@ static int tegra_vde_ioctl_decode_h264(struct tegra_vde *vde,
 	if (ret)
 		goto release_dpb_frames;
 
-	ret = pm_runtime_get_sync(dev);
+	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
-		goto put_runtime_pm;
+		goto unlock;
 
 	/*
 	 * We rely on the VDE registers reset value, otherwise VDE
@@ -843,6 +843,8 @@ static int tegra_vde_ioctl_decode_h264(struct tegra_vde *vde,
 put_runtime_pm:
 	pm_runtime_mark_last_busy(dev);
 	pm_runtime_put_autosuspend(dev);
+
+unlock:
 	mutex_unlock(&vde->lock);
 
 release_dpb_frames:
@@ -1069,11 +1071,19 @@ static int tegra_vde_probe(struct platform_device *pdev)
 	 * power-cycle it in order to put hardware into a predictable lower
 	 * power state.
 	 */
-	pm_runtime_get_sync(dev);
+	if (pm_runtime_resume_and_get(dev) < 0)
+		goto err_pm_runtime;
+
 	pm_runtime_put(dev);
 
 	return 0;
 
+err_pm_runtime:
+	misc_deregister(&vde->miscdev);
+
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+
 err_deinit_iommu:
 	tegra_vde_iommu_deinit(vde);
 
@@ -1089,7 +1099,12 @@ static int tegra_vde_remove(struct platform_device *pdev)
 	struct tegra_vde *vde = platform_get_drvdata(pdev);
 	struct device *dev = &pdev->dev;
 
+	/*
+	 * As it increments RPM usage_count even on errors, we don't need to
+	 * check the returned code here.
+	 */
 	pm_runtime_get_sync(dev);
+
 	pm_runtime_dont_use_autosuspend(dev);
 	pm_runtime_disable(dev);
 
-- 
2.30.2

[PATCH v5 06/25] staging: media: tegra-video: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/tegra-video/csi.c | 3 +--
 drivers/staging/media/tegra-video/vi.c  | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/tegra-video/csi.c b/drivers/staging/media/tegra-video/csi.c
index 033a6935c26d..e938bf4c48b6 100644
--- a/drivers/staging/media/tegra-video/csi.c
+++ b/drivers/staging/media/tegra-video/csi.c
@@ -298,10 +298,9 @@ static int tegra_csi_enable_stream(struct v4l2_subdev *subdev)
 	struct tegra_csi *csi = csi_chan->csi;
 	int ret, err;
 
-	ret = pm_runtime_get_sync(csi->dev);
+	ret = pm_runtime_resume_and_get(csi->dev);
 	if (ret < 0) {
 		dev_err(csi->dev, "failed to get runtime PM: %d\n", ret);
-		pm_runtime_put_noidle(csi->dev);
 		return ret;
 	}
 
diff --git a/drivers/staging/media/tegra-video/vi.c b/drivers/staging/media/tegra-video/vi.c
index 7a09061cda57..1298740a9c6c 100644
--- a/drivers/staging/media/tegra-video/vi.c
+++ b/drivers/staging/media/tegra-video/vi.c
@@ -297,10 +297,9 @@ static int tegra_channel_start_streaming(struct vb2_queue *vq, u32 count)
 	struct tegra_vi_channel *chan = vb2_get_drv_priv(vq);
 	int ret;
 
-	ret = pm_runtime_get_sync(chan->vi->dev);
+	ret = pm_runtime_resume_and_get(chan->vi->dev);
 	if (ret < 0) {
 		dev_err(chan->vi->dev, "failed to get runtime PM: %d\n", ret);
-		pm_runtime_put_noidle(chan->vi->dev);
 		return ret;
 	}
 
-- 
2.30.2

[PATCH v5 25/25] media: hantro: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

While there's nothing wrong with the current usage on this driver,
as we're getting rid of the pm_runtime_get_sync() call all over
the media subsystem, let's remove the last occurrence on this
driver.

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/hantro/hantro_drv.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index eea2009fa17b..74d6545395f9 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -160,9 +160,8 @@ static void device_run(void *priv)
 	src = hantro_get_src_buf(ctx);
 	dst = hantro_get_dst_buf(ctx);
 
-	ret = pm_runtime_get_sync(ctx->dev->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(ctx->dev->dev);
+	ret = pm_runtime_resume_and_get(ctx->dev->dev);
+	if (ret < 0)
 		goto err_cancel_job;
 	}
 
-- 
2.30.2

Re: [PATCH v5 05/25] staging: media: tegra-vde: use pm_runtime_resume_and_get()

[Dan Carpenter]

On Thu, May 06, 2021 at 05:25:43PM +0200, Mauro Carvalho Chehab wrote:
> @@ -1069,11 +1071,19 @@ static int tegra_vde_probe(struct platform_device *pdev)
>  	 * power-cycle it in order to put hardware into a predictable lower
>  	 * power state.
>  	 */
> -	pm_runtime_get_sync(dev);
> +	if (pm_runtime_resume_and_get(dev) < 0)
> +		goto err_pm_runtime;

Needs an error code on this path.  These days the kbuild bot will send
a warning for this eventually.

> +
>  	pm_runtime_put(dev);
>  
>  	return 0;
>  
> +err_pm_runtime:
> +	misc_deregister(&vde->miscdev);
> +
> +	pm_runtime_dont_use_autosuspend(dev);
> +	pm_runtime_disable(dev);
> +
>  err_deinit_iommu:
>  	tegra_vde_iommu_deinit(vde);
>  

regards,
dan carpenter

Re: [PATCH v5 05/25] staging: media: tegra-vde: use pm_runtime_resume_and_get()

[Dmitry Osipenko]

07.05.2021 08:13, Dan Carpenter пишет:
> On Thu, May 06, 2021 at 05:25:43PM +0200, Mauro Carvalho Chehab wrote:
>> @@ -1069,11 +1071,19 @@ static int tegra_vde_probe(struct platform_device *pdev)
>>  	 * power-cycle it in order to put hardware into a predictable lower
>>  	 * power state.
>>  	 */
>> -	pm_runtime_get_sync(dev);
>> +	if (pm_runtime_resume_and_get(dev) < 0)
>> +		goto err_pm_runtime;
> 
> Needs an error code on this path.  These days the kbuild bot will send
> a warning for this eventually.

Good catch, thank you.