linux-staging.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linuxarm@huawei.com, mauro.chehab@huawei.com,
	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	"Axel Lin" <axel.lin@ingics.com>,
	"Lee Jones" <lee.jones@linaro.org>, Arnd Bergmann <arnd@arndb.de>,
	Derek Kiernan <derek.kiernan@xilinx.com>,
	Dragan Cvetic <dragan.cvetic@xilinx.com>,
	linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev
Subject: [PATCH v10 1/5] staging: hikey9xx: split hi6421v600 irq into a separate driver
Date: Tue, 29 Jun 2021 12:31:27 +0200	[thread overview]
Message-ID: <cc460d110379b417c8b708b8c250a49d5fee472b.1624962269.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1624962269.git.mchehab+huawei@kernel.org>

Per MFD subsystem requirements, split the IRQ part of the
driver into a separate one with just the IRQ handling code
and the powerkey support.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/misc/Kconfig                        |  10 +
 drivers/misc/Makefile                       |   1 +
 drivers/misc/hi6421v600-irq.c               | 314 ++++++++++++++++++++
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 245 +--------------
 include/linux/mfd/hi6421-spmi-pmic.h        |   5 -
 5 files changed, 328 insertions(+), 247 deletions(-)
 create mode 100644 drivers/misc/hi6421v600-irq.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f4fb5c52b863..29294c52d5af 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -208,6 +208,16 @@ config CS5535_CLOCK_EVENT_SRC
 	  MFGPTs have a better resolution and max interval than the
 	  generic PIT, and are suitable for use as high-res timers.
 
+config HI6421V600_IRQ
+	tristate "HiSilicon Hi6421v600 IRQ and powerkey"
+	depends on OF
+	depends on SPMI
+	select MFD_CORE
+	select REGMAP_SPMI
+	help
+	  This driver provides IRQ handling for Hi6421v600, used on
+	  some Kirin chipsets, like the one at Hikey 970.
+
 config HP_ILO
 	tristate "Channel interface driver for the HP iLO processor"
 	depends on PCI
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e92a56d4442f..f91cab8c3d55 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -57,3 +57,4 @@ obj-$(CONFIG_HABANA_AI)		+= habanalabs/
 obj-$(CONFIG_UACCE)		+= uacce/
 obj-$(CONFIG_XILINX_SDFEC)	+= xilinx_sdfec.o
 obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
+obj-$(CONFIG_HI6421V600_IRQ)	+= hi6421v600-irq.o
diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c
new file mode 100644
index 000000000000..7c1468f0ea01
--- /dev/null
+++ b/drivers/misc/hi6421v600-irq.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for irqs in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/regmap.h>
+
+struct hi6421v600_irq {
+	struct device		*dev;
+	struct irq_domain	*domain;
+	int			irq;
+	int			gpio;
+	unsigned int		*irqs;
+	struct regmap		*regmap;
+
+	/* Protect IRQ mask changes */
+	spinlock_t		lock;
+};
+
+enum hi6421v600_irq_list {
+	OTMP = 0,
+	VBUS_CONNECT,
+	VBUS_DISCONNECT,
+	ALARMON_R,
+	HOLD_6S,
+	HOLD_1S,
+	POWERKEY_UP,
+	POWERKEY_DOWN,
+	OCP_SCP_R,
+	COUL_R,
+	SIM0_HPD_R,
+	SIM0_HPD_F,
+	SIM1_HPD_R,
+	SIM1_HPD_F,
+
+	PMIC_IRQ_LIST_MAX
+};
+
+#define HISI_IRQ_BANK_SIZE		2
+
+/*
+ * IRQ number for the power key button and mask for both UP and DOWN IRQs
+ */
+#define HISI_POWERKEY_IRQ_NUM		0
+#define HISI_IRQ_POWERKEY_UP_DOWN	(BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
+
+/*
+ * Registers for IRQ address and IRQ mask bits
+ *
+ * Please notice that we need to regmap a larger region, as other
+ * registers are used by the irqs.
+ * See drivers/irq/hi6421-irq.c.
+ */
+#define SOC_PMIC_IRQ_MASK_0_ADDR	0x0202
+#define SOC_PMIC_IRQ0_ADDR		0x0212
+
+/*
+ * The IRQs are mapped as:
+ *
+ *	======================  =============   ============	=====
+ *	IRQ			MASK REGISTER	IRQ REGISTER	BIT
+ *	======================  =============   ============	=====
+ *	OTMP			0x0202		0x212		bit 0
+ *	VBUS_CONNECT		0x0202		0x212		bit 1
+ *	VBUS_DISCONNECT		0x0202		0x212		bit 2
+ *	ALARMON_R		0x0202		0x212		bit 3
+ *	HOLD_6S			0x0202		0x212		bit 4
+ *	HOLD_1S			0x0202		0x212		bit 5
+ *	POWERKEY_UP		0x0202		0x212		bit 6
+ *	POWERKEY_DOWN		0x0202		0x212		bit 7
+ *
+ *	OCP_SCP_R		0x0203		0x213		bit 0
+ *	COUL_R			0x0203		0x213		bit 1
+ *	SIM0_HPD_R		0x0203		0x213		bit 2
+ *	SIM0_HPD_F		0x0203		0x213		bit 3
+ *	SIM1_HPD_R		0x0203		0x213		bit 4
+ *	SIM1_HPD_F		0x0203		0x213		bit 5
+ *	======================  =============   ============	=====
+ *
+ * Each mask register contains 8 bits. The ancillary macros below
+ * convert a number from 0 to 14 into a register address and a bit mask
+ */
+#define HISI_IRQ_MASK_REG(irq_data)	(SOC_PMIC_IRQ_MASK_0_ADDR + \
+					 (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
+#define HISI_IRQ_MASK_BIT(irq_data)	BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
+#define HISI_8BITS_MASK			0xff
+
+static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
+{
+	struct hi6421v600_irq *priv = __priv;
+	unsigned long pending;
+	unsigned int in;
+	int i, offset;
+
+	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+		regmap_read(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
+
+		/* Mark pending IRQs as handled */
+		regmap_write(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
+
+		pending = in & HISI_8BITS_MASK;
+
+		if (i == HISI_POWERKEY_IRQ_NUM &&
+		    (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
+			/*
+			 * If both powerkey down and up IRQs are received,
+			 * handle them at the right order
+			 */
+			generic_handle_irq(priv->irqs[POWERKEY_DOWN]);
+			generic_handle_irq(priv->irqs[POWERKEY_UP]);
+			pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
+		}
+
+		if (!pending)
+			continue;
+
+		for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
+			generic_handle_irq(priv->irqs[offset + i * BITS_PER_BYTE]);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void hi6421v600_irq_mask(struct irq_data *d)
+{
+	struct hi6421v600_irq *priv = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+	unsigned int data;
+	u32 offset;
+
+	offset = HISI_IRQ_MASK_REG(d);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	regmap_read(priv->regmap, offset, &data);
+	data |= HISI_IRQ_MASK_BIT(d);
+	regmap_write(priv->regmap, offset, data);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void hi6421v600_irq_unmask(struct irq_data *d)
+{
+	struct hi6421v600_irq *priv = irq_data_get_irq_chip_data(d);
+	u32 data, offset;
+	unsigned long flags;
+
+	offset = HISI_IRQ_MASK_REG(d);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	regmap_read(priv->regmap, offset, &data);
+	data &= ~HISI_IRQ_MASK_BIT(d);
+	regmap_write(priv->regmap, offset, data);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static struct irq_chip hi6421v600_pmu_irqchip = {
+	.name		= "hi6421v600-irq",
+	.irq_mask	= hi6421v600_irq_mask,
+	.irq_unmask	= hi6421v600_irq_unmask,
+	.irq_disable	= hi6421v600_irq_mask,
+	.irq_enable	= hi6421v600_irq_unmask,
+};
+
+static int hi6421v600_irq_map(struct irq_domain *d, unsigned int virq,
+			      irq_hw_number_t hw)
+{
+	struct hi6421v600_irq *priv = d->host_data;
+
+	irq_set_chip_and_handler_name(virq, &hi6421v600_pmu_irqchip,
+				      handle_simple_irq, "hi6421v600");
+	irq_set_chip_data(virq, priv);
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static const struct irq_domain_ops hi6421v600_domain_ops = {
+	.map	= hi6421v600_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static void hi6421v600_irq_init(struct hi6421v600_irq *priv)
+{
+	int i;
+	unsigned int pending;
+
+	/* Mask all IRQs */
+	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
+		regmap_write(priv->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
+			     HISI_8BITS_MASK);
+
+	/* Mark all IRQs as handled */
+	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+		regmap_read(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
+		regmap_write(priv->regmap, SOC_PMIC_IRQ0_ADDR + i,
+			     HISI_8BITS_MASK);
+	}
+}
+
+static int hi6421v600_irq_probe(struct platform_device *pdev)
+{
+	struct device *pmic_dev = pdev->dev.parent;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pmic_dev->of_node;
+	struct hi6421v600_irq *priv;
+	struct hi6421_spmi_pmic *pmic;
+	unsigned int virq;
+	int i, ret;
+
+	/*
+	 * This driver is meant to be called by hi6421-spmi-core,
+	 * which should first set drvdata. If this doesn't happen, hit
+	 * a warn on and return.
+	 */
+	pmic = dev_get_drvdata(pmic_dev);
+	if (WARN_ON(!pmic))
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->regmap = pmic->regmap;
+
+	spin_lock_init(&priv->lock);
+
+	priv->gpio = of_get_gpio(np, 0);
+	if (priv->gpio < 0)
+		return priv->gpio;
+
+	if (!gpio_is_valid(priv->gpio))
+		return -EINVAL;
+
+	ret = devm_gpio_request_one(dev, priv->gpio, GPIOF_IN, "pmic");
+	if (ret < 0) {
+		dev_err(dev, "Failed to request gpio%d\n", priv->gpio);
+		return ret;
+	}
+
+	priv->irq = gpio_to_irq(priv->gpio);
+
+	platform_set_drvdata(pdev, priv);
+
+	hi6421v600_irq_init(priv);
+
+	priv->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
+	if (!priv->irqs)
+		return -ENOMEM;
+
+	priv->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
+					     &hi6421v600_domain_ops, priv);
+	if (!priv->domain) {
+		dev_err(dev, "Failed to create IRQ domain\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
+		virq = irq_create_mapping(priv->domain, i);
+		if (!virq) {
+			dev_err(dev, "Failed to map H/W IRQ\n");
+			return -ENODEV;
+		}
+		priv->irqs[i] = virq;
+	}
+
+	ret = devm_request_threaded_irq(dev,
+					priv->irq, hi6421v600_irq_handler,
+					NULL,
+					IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
+					"pmic", priv);
+	if (ret < 0) {
+		dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id hi6421v600_irq_table[] = {
+	{ .name = "hi6421v600-irq" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, hi6421v600_irq_table);
+
+static struct platform_driver hi6421v600_irq_driver = {
+	.id_table = hi6421v600_irq_table,
+	.driver = {
+		.name = "hi6421v600-irq",
+	},
+	.probe	= hi6421v600_irq_probe,
+};
+module_platform_driver(hi6421v600_irq_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 IRQ driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 35ef3d4c760b..0b5686655954 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -7,205 +7,19 @@
  * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
  */
 
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/hi6421-spmi-pmic.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/spmi.h>
 
-enum hi6421_spmi_pmic_irq_list {
-	OTMP = 0,
-	VBUS_CONNECT,
-	VBUS_DISCONNECT,
-	ALARMON_R,
-	HOLD_6S,
-	HOLD_1S,
-	POWERKEY_UP,
-	POWERKEY_DOWN,
-	OCP_SCP_R,
-	COUL_R,
-	SIM0_HPD_R,
-	SIM0_HPD_F,
-	SIM1_HPD_R,
-	SIM1_HPD_F,
-
-	PMIC_IRQ_LIST_MAX
-};
-
-#define HISI_IRQ_BANK_SIZE		2
-
-/*
- * IRQ number for the power key button and mask for both UP and DOWN IRQs
- */
-#define HISI_POWERKEY_IRQ_NUM		0
-#define HISI_IRQ_POWERKEY_UP_DOWN	(BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
-
-/*
- * Registers for IRQ address and IRQ mask bits
- *
- * Please notice that we need to regmap a larger region, as other
- * registers are used by the regulators.
- * See drivers/regulator/hi6421-regulator.c.
- */
-#define SOC_PMIC_IRQ_MASK_0_ADDR	0x0202
-#define SOC_PMIC_IRQ0_ADDR		0x0212
-
-/*
- * The IRQs are mapped as:
- *
- *	======================  =============   ============	=====
- *	IRQ			MASK REGISTER	IRQ REGISTER	BIT
- *	======================  =============   ============	=====
- *	OTMP			0x0202		0x212		bit 0
- *	VBUS_CONNECT		0x0202		0x212		bit 1
- *	VBUS_DISCONNECT		0x0202		0x212		bit 2
- *	ALARMON_R		0x0202		0x212		bit 3
- *	HOLD_6S			0x0202		0x212		bit 4
- *	HOLD_1S			0x0202		0x212		bit 5
- *	POWERKEY_UP		0x0202		0x212		bit 6
- *	POWERKEY_DOWN		0x0202		0x212		bit 7
- *
- *	OCP_SCP_R		0x0203		0x213		bit 0
- *	COUL_R			0x0203		0x213		bit 1
- *	SIM0_HPD_R		0x0203		0x213		bit 2
- *	SIM0_HPD_F		0x0203		0x213		bit 3
- *	SIM1_HPD_R		0x0203		0x213		bit 4
- *	SIM1_HPD_F		0x0203		0x213		bit 5
- *	======================  =============   ============	=====
- *
- * Each mask register contains 8 bits. The ancillary macros below
- * convert a number from 0 to 14 into a register address and a bit mask
- */
-#define HISI_IRQ_MASK_REG(irq_data)	(SOC_PMIC_IRQ_MASK_0_ADDR + \
-					 (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
-#define HISI_IRQ_MASK_BIT(irq_data)	BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
-#define HISI_8BITS_MASK			0xff
-
 static const struct mfd_cell hi6421v600_devs[] = {
+	{ .name = "hi6421v600-irq", },
 	{ .name = "hi6421v600-regulator", },
 };
 
-static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
-{
-	struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
-	unsigned long pending;
-	unsigned int in;
-	int i, offset;
-
-	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
-		regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
-
-		/* Mark pending IRQs as handled */
-		regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
-
-		pending = in & HISI_8BITS_MASK;
-
-		if (i == HISI_POWERKEY_IRQ_NUM &&
-		    (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
-			/*
-			 * If both powerkey down and up IRQs are received,
-			 * handle them at the right order
-			 */
-			generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
-			generic_handle_irq(ddata->irqs[POWERKEY_UP]);
-			pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
-		}
-
-		if (!pending)
-			continue;
-
-		for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
-			generic_handle_irq(ddata->irqs[offset + i * BITS_PER_BYTE]);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void hi6421_spmi_irq_mask(struct irq_data *d)
-{
-	struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
-	unsigned long flags;
-	unsigned int data;
-	u32 offset;
-
-	offset = HISI_IRQ_MASK_REG(d);
-
-	spin_lock_irqsave(&ddata->lock, flags);
-
-	regmap_read(ddata->regmap, offset, &data);
-	data |= HISI_IRQ_MASK_BIT(d);
-	regmap_write(ddata->regmap, offset, data);
-
-	spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static void hi6421_spmi_irq_unmask(struct irq_data *d)
-{
-	struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
-	u32 data, offset;
-	unsigned long flags;
-
-	offset = HISI_IRQ_MASK_REG(d);
-
-	spin_lock_irqsave(&ddata->lock, flags);
-
-	regmap_read(ddata->regmap, offset, &data);
-	data &= ~HISI_IRQ_MASK_BIT(d);
-	regmap_write(ddata->regmap, offset, data);
-
-	spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static struct irq_chip hi6421_spmi_pmu_irqchip = {
-	.name		= "hi6421v600-irq",
-	.irq_mask	= hi6421_spmi_irq_mask,
-	.irq_unmask	= hi6421_spmi_irq_unmask,
-	.irq_disable	= hi6421_spmi_irq_mask,
-	.irq_enable	= hi6421_spmi_irq_unmask,
-};
-
-static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
-			       irq_hw_number_t hw)
-{
-	struct hi6421_spmi_pmic *ddata = d->host_data;
-
-	irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
-				      handle_simple_irq, "hi6421v600");
-	irq_set_chip_data(virq, ddata);
-	irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static const struct irq_domain_ops hi6421_spmi_domain_ops = {
-	.map	= hi6421_spmi_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
-{
-	int i;
-	unsigned int pending;
-
-	/* Mask all IRQs */
-	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
-		regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
-			     HISI_8BITS_MASK);
-
-	/* Mark all IRQs as handled */
-	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
-		regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
-		regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
-			     HISI_8BITS_MASK);
-	}
-}
-
 static const struct regmap_config regmap_config = {
 	.reg_bits	= 16,
 	.val_bits	= BITS_PER_BYTE,
@@ -216,11 +30,8 @@ static const struct regmap_config regmap_config = {
 static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
+	int ret;
 	struct hi6421_spmi_pmic *ddata;
-	unsigned int virq;
-	int ret, i;
-
 	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
@@ -229,58 +40,8 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
 	if (IS_ERR(ddata->regmap))
 		return PTR_ERR(ddata->regmap);
 
-	spin_lock_init(&ddata->lock);
-
 	ddata->dev = dev;
 
-	ddata->gpio = of_get_gpio(np, 0);
-	if (ddata->gpio < 0)
-		return ddata->gpio;
-
-	if (!gpio_is_valid(ddata->gpio))
-		return -EINVAL;
-
-	ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
-	if (ret < 0) {
-		dev_err(dev, "Failed to request gpio%d\n", ddata->gpio);
-		return ret;
-	}
-
-	ddata->irq = gpio_to_irq(ddata->gpio);
-
-	hi6421_spmi_pmic_irq_init(ddata);
-
-	ddata->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
-	if (!ddata->irqs)
-		return -ENOMEM;
-
-	ddata->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
-					      &hi6421_spmi_domain_ops, ddata);
-	if (!ddata->domain) {
-		dev_err(dev, "Failed to create IRQ domain\n");
-		return -ENODEV;
-	}
-
-	for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
-		virq = irq_create_mapping(ddata->domain, i);
-		if (!virq) {
-			dev_err(dev, "Failed to map H/W IRQ\n");
-			return -ENODEV;
-		}
-		ddata->irqs[i] = virq;
-	}
-
-	ret = devm_request_threaded_irq(dev,
-					ddata->irq, hi6421_spmi_irq_handler,
-					NULL,
-				        IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
-				        "pmic", ddata);
-	if (ret < 0) {
-		dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
-			ret);
-		return ret;
-	}
-
 	dev_set_drvdata(&pdev->dev, ddata);
 
 	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index 2660226138b8..e5b8dbf828b6 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -19,11 +19,6 @@ struct hi6421_spmi_pmic {
 	struct resource				*res;
 	struct device				*dev;
 	void __iomem				*regs;
-	spinlock_t				lock;
-	struct irq_domain			*domain;
-	int					irq;
-	int					gpio;
-	unsigned int				*irqs;
 	struct regmap				*regmap;
 };
 
-- 
2.31.1


  reply	other threads:[~2021-06-29 10:31 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-29 10:31 [PATCH v10 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mauro Carvalho Chehab
2021-06-29 10:31 ` Mauro Carvalho Chehab [this message]
2021-06-29 10:31 ` [PATCH v10 2/5] regulator: hi6421v600-regulator: fix platform drvdata Mauro Carvalho Chehab
     [not found]   ` <CAFRkauCzHqUfva+zTRhOyiMMb4WsKPHvYJuqpOPwy+siPMZGOQ@mail.gmail.com>
2021-06-29 11:09     ` Mauro Carvalho Chehab
     [not found]       ` <CAFRkauCPKQyD_Dooqrxvra94RyLXrPDeCSSdfBfvh-o0Zh8q3g@mail.gmail.com>
2021-06-29 13:32         ` Mauro Carvalho Chehab
2021-06-29 15:11   ` Mark Brown
2021-06-29 19:31     ` Mauro Carvalho Chehab
2021-06-30  8:20     ` Mauro Carvalho Chehab
2021-06-29 10:31 ` [PATCH v10 3/5] mfd: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
2021-07-01 14:02   ` Rob Herring
2021-06-29 10:43 ` [PATCH v10 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Greg Kroah-Hartman
2021-06-30  8:28   ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cc460d110379b417c8b708b8c250a49d5fee472b.1624962269.git.mchehab+huawei@kernel.org \
    --to=mchehab+huawei@kernel.org \
    --cc=arnd@arndb.de \
    --cc=axel.lin@ingics.com \
    --cc=derek.kiernan@xilinx.com \
    --cc=dragan.cvetic@xilinx.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=linuxarm@huawei.com \
    --cc=mauro.chehab@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).