[PATCH v10 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging

[PATCH v10 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging

[Mauro Carvalho Chehab]

Hi Greg,

This series contain the final bits needed for the USB3 bus to work
without staging drivers on Hikey 970.

Tested on a Hikey 970:

	$ lsusb
	Bus 002 Device 002: ID 0451:8140 Texas Instruments, Inc. TUSB8041 4-Port Hub
	Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
	Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
	Bus 001 Device 002: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
	Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

and checked that mouse events are working using evtest:

	...
	Input device ID: bus 0x3 vendor 0x46d product 0xc52b version 0x111
	Input device name: "Logitech USB Receiver Mouse"
	....
	Testing ... (interrupt to exit)
	Event: time 1624640001.871917, type 2 (EV_REL), code 0 (REL_X), value -4
	Event: time 1624640001.871917, type 2 (EV_REL), code 1 (REL_Y), value -3
	Event: time 1624640001.871917, -------------- SYN_REPORT ------------
	Event: time 1624640001.879868, type 2 (EV_REL), code 0 (REL_X), value -5
	Event: time 1624640001.879868, type 2 (EV_REL), code 1 (REL_Y), value -4
	....

v10:
  - Addressed some issues pointed by Axel Lin at the regulator;
  - Removed a now uneeded header file (hi6421-spmi-pmic.h);
  - Addressed a couple of checkpatch warnings and did minor
    cleanups.

Mauro Carvalho Chehab (5):
  staging: hikey9xx: split hi6421v600 irq into a separate driver
  regulator: hi6421v600-regulator: fix platform drvdata
  mfd: hi6421-spmi-pmic: move driver from staging
  dts: hisilicon: add support for the PMIC found on Hikey 970
  dts: hisilicon: add support for USB3 on Hikey 970

 .../mfd/hisilicon,hi6421-spmi-pmic.yaml       | 134 ++++++++
 MAINTAINERS                                   |   7 +
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 129 ++++++--
 arch/arm64/boot/dts/hisilicon/hi3670.dtsi     |  56 ++++
 .../boot/dts/hisilicon/hikey970-pmic.dtsi     |  87 +++++
 drivers/mfd/Kconfig                           |  16 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/hi6421-spmi-pmic.c                |  66 ++++
 drivers/misc/Kconfig                          |  10 +
 drivers/misc/Makefile                         |   1 +
 drivers/misc/hi6421v600-irq.c                 | 313 ++++++++++++++++++
 drivers/regulator/hi6421v600-regulator.c      |  49 +--
 drivers/staging/Kconfig                       |   2 -
 drivers/staging/Makefile                      |   1 -
 drivers/staging/hikey9xx/Kconfig              |  19 --
 drivers/staging/hikey9xx/Makefile             |   3 -
 drivers/staging/hikey9xx/TODO                 |   5 -
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c   | 311 -----------------
 .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 134 --------
 include/linux/mfd/hi6421-spmi-pmic.h          |  30 --
 20 files changed, 826 insertions(+), 548 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
 create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
 create mode 100644 drivers/misc/hi6421v600-irq.c
 delete mode 100644 drivers/staging/hikey9xx/Kconfig
 delete mode 100644 drivers/staging/hikey9xx/Makefile
 delete mode 100644 drivers/staging/hikey9xx/TODO
 delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
 delete mode 100644 include/linux/mfd/hi6421-spmi-pmic.h

-- 
2.31.1

[PATCH v10 1/5] staging: hikey9xx: split hi6421v600 irq into a separate driver

[Mauro Carvalho Chehab]

Per MFD subsystem requirements, split the IRQ part of the
driver into a separate one with just the IRQ handling code
and the powerkey support.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/misc/Kconfig                        |  10 +
 drivers/misc/Makefile                       |   1 +
 drivers/misc/hi6421v600-irq.c               | 314 ++++++++++++++++++++
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 245 +--------------
 include/linux/mfd/hi6421-spmi-pmic.h        |   5 -
 5 files changed, 328 insertions(+), 247 deletions(-)
 create mode 100644 drivers/misc/hi6421v600-irq.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f4fb5c52b863..29294c52d5af 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -208,6 +208,16 @@ config CS5535_CLOCK_EVENT_SRC
 	  MFGPTs have a better resolution and max interval than the
 	  generic PIT, and are suitable for use as high-res timers.
 
+config HI6421V600_IRQ
+	tristate "HiSilicon Hi6421v600 IRQ and powerkey"
+	depends on OF
+	depends on SPMI
+	select MFD_CORE
+	select REGMAP_SPMI
+	help
+	  This driver provides IRQ handling for Hi6421v600, used on
+	  some Kirin chipsets, like the one at Hikey 970.
+
 config HP_ILO
 	tristate "Channel interface driver for the HP iLO processor"
 	depends on PCI
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e92a56d4442f..f91cab8c3d55 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -57,3 +57,4 @@ obj-$(CONFIG_HABANA_AI)		+= habanalabs/
 obj-$(CONFIG_UACCE)		+= uacce/
 obj-$(CONFIG_XILINX_SDFEC)	+= xilinx_sdfec.o
 obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
+obj-$(CONFIG_HI6421V600_IRQ)	+= hi6421v600-irq.o
diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c
new file mode 100644
index 000000000000..7c1468f0ea01
--- /dev/null
+++ b/drivers/misc/hi6421v600-irq.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for irqs in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/regmap.h>
+
+struct hi6421v600_irq {
+	struct device		*dev;
+	struct irq_domain	*domain;
+	int			irq;
+	int			gpio;
+	unsigned int		*irqs;
+	struct regmap		*regmap;
+
+	/* Protect IRQ mask changes */
+	spinlock_t		lock;
+};
+
+enum hi6421v600_irq_list {
+	OTMP = 0,
+	VBUS_CONNECT,
+	VBUS_DISCONNECT,
+	ALARMON_R,
+	HOLD_6S,
+	HOLD_1S,
+	POWERKEY_UP,
+	POWERKEY_DOWN,
+	OCP_SCP_R,
+	COUL_R,
+	SIM0_HPD_R,
+	SIM0_HPD_F,
+	SIM1_HPD_R,
+	SIM1_HPD_F,
+
+	PMIC_IRQ_LIST_MAX
+};
+
+#define HISI_IRQ_BANK_SIZE		2
+
+/*
+ * IRQ number for the power key button and mask for both UP and DOWN IRQs
+ */
+#define HISI_POWERKEY_IRQ_NUM		0
+#define HISI_IRQ_POWERKEY_UP_DOWN	(BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
+
+/*
+ * Registers for IRQ address and IRQ mask bits
+ *
+ * Please notice that we need to regmap a larger region, as other
+ * registers are used by the irqs.
+ * See drivers/irq/hi6421-irq.c.
+ */
+#define SOC_PMIC_IRQ_MASK_0_ADDR	0x0202
+#define SOC_PMIC_IRQ0_ADDR		0x0212
+
+/*
+ * The IRQs are mapped as:
+ *
+ *	======================  =============   ============	=====
+ *	IRQ			MASK REGISTER	IRQ REGISTER	BIT
+ *	======================  =============   ============	=====
+ *	OTMP			0x0202		0x212		bit 0
+ *	VBUS_CONNECT		0x0202		0x212		bit 1
+ *	VBUS_DISCONNECT		0x0202		0x212		bit 2
+ *	ALARMON_R		0x0202		0x212		bit 3
+ *	HOLD_6S			0x0202		0x212		bit 4
+ *	HOLD_1S			0x0202		0x212		bit 5
+ *	POWERKEY_UP		0x0202		0x212		bit 6
+ *	POWERKEY_DOWN		0x0202		0x212		bit 7
+ *
+ *	OCP_SCP_R		0x0203		0x213		bit 0
+ *	COUL_R			0x0203		0x213		bit 1
+ *	SIM0_HPD_R		0x0203		0x213		bit 2
+ *	SIM0_HPD_F		0x0203		0x213		bit 3
+ *	SIM1_HPD_R		0x0203		0x213		bit 4
+ *	SIM1_HPD_F		0x0203		0x213		bit 5
+ *	======================  =============   ============	=====
+ *
+ * Each mask register contains 8 bits. The ancillary macros below
+ * convert a number from 0 to 14 into a register address and a bit mask
+ */
+#define HISI_IRQ_MASK_REG(irq_data)	(SOC_PMIC_IRQ_MASK_0_ADDR + \
+					 (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
+#define HISI_IRQ_MASK_BIT(irq_data)	BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
+#define HISI_8BITS_MASK			0xff
+
+static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
+{
+	struct hi6421v600_irq *priv = __priv;
+	unsigned long pending;
+	unsigned int in;
+	int i, offset;
+
+	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+		regmap_read(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
+
+		/* Mark pending IRQs as handled */
+		regmap_write(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
+
+		pending = in & HISI_8BITS_MASK;
+
+		if (i == HISI_POWERKEY_IRQ_NUM &&
+		    (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
+			/*
+			 * If both powerkey down and up IRQs are received,
+			 * handle them at the right order
+			 */
+			generic_handle_irq(priv->irqs[POWERKEY_DOWN]);
+			generic_handle_irq(priv->irqs[POWERKEY_UP]);
+			pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
+		}
+
+		if (!pending)
+			continue;
+
+		for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
+			generic_handle_irq(priv->irqs[offset + i * BITS_PER_BYTE]);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void hi6421v600_irq_mask(struct irq_data *d)
+{
+	struct hi6421v600_irq *priv = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+	unsigned int data;
+	u32 offset;
+
+	offset = HISI_IRQ_MASK_REG(d);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	regmap_read(priv->regmap, offset, &data);
+	data |= HISI_IRQ_MASK_BIT(d);
+	regmap_write(priv->regmap, offset, data);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void hi6421v600_irq_unmask(struct irq_data *d)
+{
+	struct hi6421v600_irq *priv = irq_data_get_irq_chip_data(d);
+	u32 data, offset;
+	unsigned long flags;
+
+	offset = HISI_IRQ_MASK_REG(d);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	regmap_read(priv->regmap, offset, &data);
+	data &= ~HISI_IRQ_MASK_BIT(d);
+	regmap_write(priv->regmap, offset, data);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static struct irq_chip hi6421v600_pmu_irqchip = {
+	.name		= "hi6421v600-irq",
+	.irq_mask	= hi6421v600_irq_mask,
+	.irq_unmask	= hi6421v600_irq_unmask,
+	.irq_disable	= hi6421v600_irq_mask,
+	.irq_enable	= hi6421v600_irq_unmask,
+};
+
+static int hi6421v600_irq_map(struct irq_domain *d, unsigned int virq,
+			      irq_hw_number_t hw)
+{
+	struct hi6421v600_irq *priv = d->host_data;
+
+	irq_set_chip_and_handler_name(virq, &hi6421v600_pmu_irqchip,
+				      handle_simple_irq, "hi6421v600");
+	irq_set_chip_data(virq, priv);
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static const struct irq_domain_ops hi6421v600_domain_ops = {
+	.map	= hi6421v600_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static void hi6421v600_irq_init(struct hi6421v600_irq *priv)
+{
+	int i;
+	unsigned int pending;
+
+	/* Mask all IRQs */
+	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
+		regmap_write(priv->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
+			     HISI_8BITS_MASK);
+
+	/* Mark all IRQs as handled */
+	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+		regmap_read(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
+		regmap_write(priv->regmap, SOC_PMIC_IRQ0_ADDR + i,
+			     HISI_8BITS_MASK);
+	}
+}
+
+static int hi6421v600_irq_probe(struct platform_device *pdev)
+{
+	struct device *pmic_dev = pdev->dev.parent;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pmic_dev->of_node;
+	struct hi6421v600_irq *priv;
+	struct hi6421_spmi_pmic *pmic;
+	unsigned int virq;
+	int i, ret;
+
+	/*
+	 * This driver is meant to be called by hi6421-spmi-core,
+	 * which should first set drvdata. If this doesn't happen, hit
+	 * a warn on and return.
+	 */
+	pmic = dev_get_drvdata(pmic_dev);
+	if (WARN_ON(!pmic))
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->regmap = pmic->regmap;
+
+	spin_lock_init(&priv->lock);
+
+	priv->gpio = of_get_gpio(np, 0);
+	if (priv->gpio < 0)
+		return priv->gpio;
+
+	if (!gpio_is_valid(priv->gpio))
+		return -EINVAL;
+
+	ret = devm_gpio_request_one(dev, priv->gpio, GPIOF_IN, "pmic");
+	if (ret < 0) {
+		dev_err(dev, "Failed to request gpio%d\n", priv->gpio);
+		return ret;
+	}
+
+	priv->irq = gpio_to_irq(priv->gpio);
+
+	platform_set_drvdata(pdev, priv);
+
+	hi6421v600_irq_init(priv);
+
+	priv->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
+	if (!priv->irqs)
+		return -ENOMEM;
+
+	priv->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
+					     &hi6421v600_domain_ops, priv);
+	if (!priv->domain) {
+		dev_err(dev, "Failed to create IRQ domain\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
+		virq = irq_create_mapping(priv->domain, i);
+		if (!virq) {
+			dev_err(dev, "Failed to map H/W IRQ\n");
+			return -ENODEV;
+		}
+		priv->irqs[i] = virq;
+	}
+
+	ret = devm_request_threaded_irq(dev,
+					priv->irq, hi6421v600_irq_handler,
+					NULL,
+					IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
+					"pmic", priv);
+	if (ret < 0) {
+		dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id hi6421v600_irq_table[] = {
+	{ .name = "hi6421v600-irq" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, hi6421v600_irq_table);
+
+static struct platform_driver hi6421v600_irq_driver = {
+	.id_table = hi6421v600_irq_table,
+	.driver = {
+		.name = "hi6421v600-irq",
+	},
+	.probe	= hi6421v600_irq_probe,
+};
+module_platform_driver(hi6421v600_irq_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 IRQ driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 35ef3d4c760b..0b5686655954 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -7,205 +7,19 @@
  * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
  */
 
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/hi6421-spmi-pmic.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/spmi.h>
 
-enum hi6421_spmi_pmic_irq_list {
-	OTMP = 0,
-	VBUS_CONNECT,
-	VBUS_DISCONNECT,
-	ALARMON_R,
-	HOLD_6S,
-	HOLD_1S,
-	POWERKEY_UP,
-	POWERKEY_DOWN,
-	OCP_SCP_R,
-	COUL_R,
-	SIM0_HPD_R,
-	SIM0_HPD_F,
-	SIM1_HPD_R,
-	SIM1_HPD_F,
-
-	PMIC_IRQ_LIST_MAX
-};
-
-#define HISI_IRQ_BANK_SIZE		2
-
-/*
- * IRQ number for the power key button and mask for both UP and DOWN IRQs
- */
-#define HISI_POWERKEY_IRQ_NUM		0
-#define HISI_IRQ_POWERKEY_UP_DOWN	(BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
-
-/*
- * Registers for IRQ address and IRQ mask bits
- *
- * Please notice that we need to regmap a larger region, as other
- * registers are used by the regulators.
- * See drivers/regulator/hi6421-regulator.c.
- */
-#define SOC_PMIC_IRQ_MASK_0_ADDR	0x0202
-#define SOC_PMIC_IRQ0_ADDR		0x0212
-
-/*
- * The IRQs are mapped as:
- *
- *	======================  =============   ============	=====
- *	IRQ			MASK REGISTER	IRQ REGISTER	BIT
- *	======================  =============   ============	=====
- *	OTMP			0x0202		0x212		bit 0
- *	VBUS_CONNECT		0x0202		0x212		bit 1
- *	VBUS_DISCONNECT		0x0202		0x212		bit 2
- *	ALARMON_R		0x0202		0x212		bit 3
- *	HOLD_6S			0x0202		0x212		bit 4
- *	HOLD_1S			0x0202		0x212		bit 5
- *	POWERKEY_UP		0x0202		0x212		bit 6
- *	POWERKEY_DOWN		0x0202		0x212		bit 7
- *
- *	OCP_SCP_R		0x0203		0x213		bit 0
- *	COUL_R			0x0203		0x213		bit 1
- *	SIM0_HPD_R		0x0203		0x213		bit 2
- *	SIM0_HPD_F		0x0203		0x213		bit 3
- *	SIM1_HPD_R		0x0203		0x213		bit 4
- *	SIM1_HPD_F		0x0203		0x213		bit 5
- *	======================  =============   ============	=====
- *
- * Each mask register contains 8 bits. The ancillary macros below
- * convert a number from 0 to 14 into a register address and a bit mask
- */
-#define HISI_IRQ_MASK_REG(irq_data)	(SOC_PMIC_IRQ_MASK_0_ADDR + \
-					 (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
-#define HISI_IRQ_MASK_BIT(irq_data)	BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
-#define HISI_8BITS_MASK			0xff
-
 static const struct mfd_cell hi6421v600_devs[] = {
+	{ .name = "hi6421v600-irq", },
 	{ .name = "hi6421v600-regulator", },
 };
 
-static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
-{
-	struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
-	unsigned long pending;
-	unsigned int in;
-	int i, offset;
-
-	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
-		regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
-
-		/* Mark pending IRQs as handled */
-		regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
-
-		pending = in & HISI_8BITS_MASK;
-
-		if (i == HISI_POWERKEY_IRQ_NUM &&
-		    (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
-			/*
-			 * If both powerkey down and up IRQs are received,
-			 * handle them at the right order
-			 */
-			generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
-			generic_handle_irq(ddata->irqs[POWERKEY_UP]);
-			pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
-		}
-
-		if (!pending)
-			continue;
-
-		for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
-			generic_handle_irq(ddata->irqs[offset + i * BITS_PER_BYTE]);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void hi6421_spmi_irq_mask(struct irq_data *d)
-{
-	struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
-	unsigned long flags;
-	unsigned int data;
-	u32 offset;
-
-	offset = HISI_IRQ_MASK_REG(d);
-
-	spin_lock_irqsave(&ddata->lock, flags);
-
-	regmap_read(ddata->regmap, offset, &data);
-	data |= HISI_IRQ_MASK_BIT(d);
-	regmap_write(ddata->regmap, offset, data);
-
-	spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static void hi6421_spmi_irq_unmask(struct irq_data *d)
-{
-	struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
-	u32 data, offset;
-	unsigned long flags;
-
-	offset = HISI_IRQ_MASK_REG(d);
-
-	spin_lock_irqsave(&ddata->lock, flags);
-
-	regmap_read(ddata->regmap, offset, &data);
-	data &= ~HISI_IRQ_MASK_BIT(d);
-	regmap_write(ddata->regmap, offset, data);
-
-	spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static struct irq_chip hi6421_spmi_pmu_irqchip = {
-	.name		= "hi6421v600-irq",
-	.irq_mask	= hi6421_spmi_irq_mask,
-	.irq_unmask	= hi6421_spmi_irq_unmask,
-	.irq_disable	= hi6421_spmi_irq_mask,
-	.irq_enable	= hi6421_spmi_irq_unmask,
-};
-
-static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
-			       irq_hw_number_t hw)
-{
-	struct hi6421_spmi_pmic *ddata = d->host_data;
-
-	irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
-				      handle_simple_irq, "hi6421v600");
-	irq_set_chip_data(virq, ddata);
-	irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static const struct irq_domain_ops hi6421_spmi_domain_ops = {
-	.map	= hi6421_spmi_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
-{
-	int i;
-	unsigned int pending;
-
-	/* Mask all IRQs */
-	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
-		regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
-			     HISI_8BITS_MASK);
-
-	/* Mark all IRQs as handled */
-	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
-		regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
-		regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
-			     HISI_8BITS_MASK);
-	}
-}
-
 static const struct regmap_config regmap_config = {
 	.reg_bits	= 16,
 	.val_bits	= BITS_PER_BYTE,
@@ -216,11 +30,8 @@ static const struct regmap_config regmap_config = {
 static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
+	int ret;
 	struct hi6421_spmi_pmic *ddata;
-	unsigned int virq;
-	int ret, i;
-
 	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
@@ -229,58 +40,8 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
 	if (IS_ERR(ddata->regmap))
 		return PTR_ERR(ddata->regmap);
 
-	spin_lock_init(&ddata->lock);
-
 	ddata->dev = dev;
 
-	ddata->gpio = of_get_gpio(np, 0);
-	if (ddata->gpio < 0)
-		return ddata->gpio;
-
-	if (!gpio_is_valid(ddata->gpio))
-		return -EINVAL;
-
-	ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
-	if (ret < 0) {
-		dev_err(dev, "Failed to request gpio%d\n", ddata->gpio);
-		return ret;
-	}
-
-	ddata->irq = gpio_to_irq(ddata->gpio);
-
-	hi6421_spmi_pmic_irq_init(ddata);
-
-	ddata->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
-	if (!ddata->irqs)
-		return -ENOMEM;
-
-	ddata->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
-					      &hi6421_spmi_domain_ops, ddata);
-	if (!ddata->domain) {
-		dev_err(dev, "Failed to create IRQ domain\n");
-		return -ENODEV;
-	}
-
-	for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
-		virq = irq_create_mapping(ddata->domain, i);
-		if (!virq) {
-			dev_err(dev, "Failed to map H/W IRQ\n");
-			return -ENODEV;
-		}
-		ddata->irqs[i] = virq;
-	}
-
-	ret = devm_request_threaded_irq(dev,
-					ddata->irq, hi6421_spmi_irq_handler,
-					NULL,
-				        IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
-				        "pmic", ddata);
-	if (ret < 0) {
-		dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
-			ret);
-		return ret;
-	}
-
 	dev_set_drvdata(&pdev->dev, ddata);
 
 	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index 2660226138b8..e5b8dbf828b6 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -19,11 +19,6 @@ struct hi6421_spmi_pmic {
 	struct resource				*res;
 	struct device				*dev;
 	void __iomem				*regs;
-	spinlock_t				lock;
-	struct irq_domain			*domain;
-	int					irq;
-	int					gpio;
-	unsigned int				*irqs;
 	struct regmap				*regmap;
 };
 
-- 
2.31.1

[PATCH v10 2/5] regulator: hi6421v600-regulator: fix platform drvdata

[Mauro Carvalho Chehab]

platform drvdata can't be used inside the regulator driver,
as this is already used by the MFD and SPMI drivers.

So, change the logic to allocate it inside the
struct hi6421_spmi_pmic.

While here, drop the now unused struct and add a missing dot
at the Huawei's copyrights.

Fixes: 50e629362e1f ("regulator: hi6421v600: Fix setting wrong driver_data")

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/misc/hi6421v600-irq.c               |  9 ++--
 drivers/regulator/hi6421v600-regulator.c    | 49 +++++++++++----------
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 18 +++-----
 include/linux/mfd/hi6421-spmi-pmic.h        | 25 -----------
 4 files changed, 35 insertions(+), 66 deletions(-)
 delete mode 100644 include/linux/mfd/hi6421-spmi-pmic.h

diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c
index 7c1468f0ea01..0c2477480450 100644
--- a/drivers/misc/hi6421v600-irq.c
+++ b/drivers/misc/hi6421v600-irq.c
@@ -10,7 +10,6 @@
 #include <linux/bitops.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
 #include <linux/module.h>
 #include <linux/of_gpio.h>
 #include <linux/platform_device.h>
@@ -220,7 +219,7 @@ static int hi6421v600_irq_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = pmic_dev->of_node;
 	struct hi6421v600_irq *priv;
-	struct hi6421_spmi_pmic *pmic;
+	struct regmap *regmap;
 	unsigned int virq;
 	int i, ret;
 
@@ -229,8 +228,8 @@ static int hi6421v600_irq_probe(struct platform_device *pdev)
 	 * which should first set drvdata. If this doesn't happen, hit
 	 * a warn on and return.
 	 */
-	pmic = dev_get_drvdata(pmic_dev);
-	if (WARN_ON(!pmic))
+	regmap = dev_get_drvdata(pmic_dev);
+	if (WARN_ON(!regmap))
 		return -ENODEV;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -238,7 +237,7 @@ static int hi6421v600_irq_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	priv->dev = dev;
-	priv->regmap = pmic->regmap;
+	priv->regmap = regmap;
 
 	spin_lock_init(&priv->lock);
 
diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
index 9b162c0555c3..0e78535eca62 100644
--- a/drivers/regulator/hi6421v600-regulator.c
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -4,27 +4,25 @@
 //
 // Copyright (c) 2013 Linaro Ltd.
 // Copyright (c) 2011 HiSilicon Ltd.
-// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
 //
 // Guodong Xu <guodong.xu@linaro.org>
 
 #include <linux/delay.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/driver.h>
 #include <linux/spmi.h>
 
-struct hi6421_spmi_reg_priv {
-	/* Serialize regulator enable logic */
-	struct mutex enable_mutex;
-};
-
 struct hi6421_spmi_reg_info {
 	struct regulator_desc	desc;
 	u8			eco_mode_mask;
 	u32			eco_uA;
+
+	/* Serialize regulator enable logic */
+	struct mutex		*enable_mutex;
 };
 
 static const unsigned int ldo3_voltages[] = {
@@ -98,12 +96,11 @@ static const unsigned int ldo34_voltages[] = {
 
 static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 {
-	struct hi6421_spmi_reg_priv *priv;
+	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
 	int ret;
 
-	priv = dev_get_drvdata(rdev->dev.parent);
 	/* cannot enable more than one regulator at one time */
-	mutex_lock(&priv->enable_mutex);
+	mutex_lock(sreg->enable_mutex);
 
 	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				 rdev->desc->enable_mask,
@@ -112,7 +109,7 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 	/* Avoid powering up multiple devices at the same time */
 	usleep_range(rdev->desc->off_on_delay, rdev->desc->off_on_delay + 60);
 
-	mutex_unlock(&priv->enable_mutex);
+	mutex_unlock(sreg->enable_mutex);
 
 	return ret;
 }
@@ -231,11 +228,12 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
 {
 	struct device *pmic_dev = pdev->dev.parent;
 	struct regulator_config config = { };
-	struct hi6421_spmi_reg_priv *priv;
+	struct hi6421_spmi_reg_info *sreg;
 	struct hi6421_spmi_reg_info *info;
 	struct device *dev = &pdev->dev;
-	struct hi6421_spmi_pmic *pmic;
+	struct regmap *regmap;
 	struct regulator_dev *rdev;
+	struct mutex *enable_mutex;
 	int i;
 
 	/*
@@ -243,23 +241,27 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
 	 * which should first set drvdata. If this doesn't happen, hit
 	 * a warn on and return.
 	 */
-	pmic = dev_get_drvdata(pmic_dev);
-	if (WARN_ON(!pmic))
+	regmap = dev_get_drvdata(pmic_dev);
+	if (WARN_ON(!regmap))
 		return -ENODEV;
 
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	mutex_init(&priv->enable_mutex);
-	platform_set_drvdata(pdev, priv);
+	enable_mutex = devm_kzalloc(dev, sizeof(*enable_mutex), GFP_KERNEL);
+	mutex_init(enable_mutex);
 
 	for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
 		info = &regulator_info[i];
 
+		sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
+		if (!sreg)
+			return -ENOMEM;
+
+		sreg->enable_mutex = enable_mutex;
+		sreg->eco_mode_mask = regulator_info[i].eco_mode_mask;
+		sreg->eco_uA = regulator_info[i].eco_uA;
+
 		config.dev = pdev->dev.parent;
-		config.driver_data = info;
-		config.regmap = pmic->regmap;
+		config.driver_data = sreg;
+		config.regmap = regmap;
 
 		rdev = devm_regulator_register(dev, &info->desc, &config);
 		if (IS_ERR(rdev)) {
@@ -289,4 +291,3 @@ module_platform_driver(hi6421_spmi_regulator_driver);
 
 MODULE_DESCRIPTION("Hi6421v600 SPMI regulator driver");
 MODULE_LICENSE("GPL v2");
-
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 0b5686655954..f63ba73c9e33 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -4,11 +4,10 @@
  *
  * Copyright (c) 2013 Linaro Ltd.
  * Copyright (c) 2011 Hisilicon.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
  */
 
 #include <linux/mfd/core.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -30,19 +29,14 @@ static const struct regmap_config regmap_config = {
 static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
 	int ret;
-	struct hi6421_spmi_pmic *ddata;
-	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
 
-	ddata->regmap = devm_regmap_init_spmi_ext(pdev, &regmap_config);
-	if (IS_ERR(ddata->regmap))
-		return PTR_ERR(ddata->regmap);
+	regmap = devm_regmap_init_spmi_ext(pdev, &regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
 
-	ddata->dev = dev;
-
-	dev_set_drvdata(&pdev->dev, ddata);
+	dev_set_drvdata(&pdev->dev, regmap);
 
 	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
 				   hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
deleted file mode 100644
index e5b8dbf828b6..000000000000
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Header file for device driver Hi6421 PMIC
- *
- * Copyright (c) 2013 Linaro Ltd.
- * Copyright (C) 2011 Hisilicon.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
- *
- * Guodong Xu <guodong.xu@linaro.org>
- */
-
-#ifndef	__HISI_PMIC_H
-#define	__HISI_PMIC_H
-
-#include <linux/irqdomain.h>
-#include <linux/regmap.h>
-
-struct hi6421_spmi_pmic {
-	struct resource				*res;
-	struct device				*dev;
-	void __iomem				*regs;
-	struct regmap				*regmap;
-};
-
-#endif		/* __HISI_PMIC_H */
-- 
2.31.1

[PATCH v10 3/5] mfd: hi6421-spmi-pmic: move driver from staging

[Mauro Carvalho Chehab]

This driver is ready for mainstream. So, move it out of staging.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../mfd/hisilicon,hi6421-spmi-pmic.yaml       | 134 ++++++++++++++++++
 MAINTAINERS                                   |   7 +
 drivers/mfd/Kconfig                           |  16 +++
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/hi6421-spmi-pmic.c                |  66 +++++++++
 drivers/staging/Kconfig                       |   2 -
 drivers/staging/Makefile                      |   1 -
 drivers/staging/hikey9xx/Kconfig              |  19 ---
 drivers/staging/hikey9xx/Makefile             |   3 -
 drivers/staging/hikey9xx/TODO                 |   5 -
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c   |  66 ---------
 .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 134 ------------------
 12 files changed, 224 insertions(+), 230 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/Kconfig
 delete mode 100644 drivers/staging/hikey9xx/Makefile
 delete mode 100644 drivers/staging/hikey9xx/TODO
 delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml

diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644
index 000000000000..8e355cddd437
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+  (SPMI) bus. It provides interrupts and power supply.
+
+  The GPIO and interrupt settings are represented as part of the top-level PMIC
+  node.
+
+  The SPMI controller part is provided by
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]"
+
+  compatible:
+    const: hisilicon,hi6421v600-spmi
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  gpios:
+    maxItems: 1
+    description: GPIO used for IRQs
+
+  regulators:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^ldo[0-9]+@[0-9a-f]$':
+        type: object
+
+        $ref: "/schemas/regulator/regulator.yaml#"
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    /* pmic properties */
+
+    pmic: pmic@0 {
+      compatible = "hisilicon,hi6421-spmi";
+      reg = <0 0>;
+
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      gpios = <&gpio28 0 0>;
+
+      regulators {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ldo3: LDO3 {
+          regulator-name = "ldo3";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2000000>;
+          regulator-boot-on;
+        };
+
+        ldo4: LDO4 {
+          regulator-name = "ldo4";
+          regulator-min-microvolt = <1725000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-boot-on;
+        };
+
+        ldo9: LDO9 {
+          regulator-name = "ldo9";
+          regulator-min-microvolt = <1750000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo15: LDO15 {
+          regulator-name = "ldo15";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-always-on;
+        };
+
+        ldo16: LDO16 {
+          regulator-name = "ldo16";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-boot-on;
+        };
+
+        ldo17: LDO17 {
+          regulator-name = "ldo17";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+        };
+
+        ldo33: LDO33 {
+          regulator-name = "ldo33";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo34: LDO34 {
+          regulator-name = "ldo34";
+          regulator-min-microvolt = <2600000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9a69e3810964..89e84b050de6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8291,6 +8291,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
 F:	drivers/spmi/hisi-spmi-controller.c
 
+HISILICON SPMI PMIC DRIVER FOR HIKEY 6421v600
+M:	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+F:	drivers/mfd/hi6421-spmi-pmic.c
+
 HISILICON STAGING DRIVERS FOR HIKEY 960/970
 M:	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
 S:	Maintained
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 5c7f2b100191..99b8da2548b5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -509,6 +509,22 @@ config MFD_HI6421_PMIC
 	  menus in order to enable them.
 	  We communicate with the Hi6421 via memory-mapped I/O.
 
+config MFD_HI6421_SPMI
+	tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
+	depends on OF
+	depends on SPMI
+	select MFD_CORE
+	select REGMAP_SPMI
+	help
+	  Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
+	  multi-functions, such as regulators, RTC, codec, Coulomb counter,
+	  etc.
+
+	  This driver includes core APIs _only_. You have to select
+	  individual components like voltage regulators under corresponding
+	  menus in order to enable them.
+	  We communicate with the Hi6421v600 via a SPMI bus.
+
 config MFD_HI655X_PMIC
 	tristate "HiSilicon Hi655X series PMU/Codec IC"
 	depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 4f6d2b8a5f76..e87230fc61ac 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -232,6 +232,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
 obj-$(CONFIG_MFD_IQS62X)	+= iqs62x.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI6421_SPMI)	+= hi6421-spmi-pmic.o
 obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
 obj-$(CONFIG_MFD_DLN2)		+= dln2.o
 obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
diff --git a/drivers/mfd/hi6421-spmi-pmic.c b/drivers/mfd/hi6421-spmi-pmic.c
new file mode 100644
index 000000000000..f63ba73c9e33
--- /dev/null
+++ b/drivers/mfd/hi6421-spmi-pmic.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for regulators in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+static const struct mfd_cell hi6421v600_devs[] = {
+	{ .name = "hi6421v600-irq", },
+	{ .name = "hi6421v600-regulator", },
+};
+
+static const struct regmap_config regmap_config = {
+	.reg_bits	= 16,
+	.val_bits	= BITS_PER_BYTE,
+	.max_register	= 0xffff,
+	.fast_io	= true
+};
+
+static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	int ret;
+
+	regmap = devm_regmap_init_spmi_ext(pdev, &regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	dev_set_drvdata(&pdev->dev, regmap);
+
+	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+				   hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
+				   NULL, 0, NULL);
+	if (ret < 0)
+		dev_err(dev, "Failed to add child devices: %d\n", ret);
+
+	return ret;
+}
+
+static const struct of_device_id pmic_spmi_id_table[] = {
+	{ .compatible = "hisilicon,hi6421-spmi" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
+
+static struct spmi_driver hi6421_spmi_pmic_driver = {
+	.driver = {
+		.name	= "hi6421-spmi-pmic",
+		.of_match_table = pmic_spmi_id_table,
+	},
+	.probe	= hi6421_spmi_pmic_probe,
+};
+module_spmi_driver(hi6421_spmi_pmic_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index b7ae5bdc4eb5..5b4267d3ed6b 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -104,6 +104,4 @@ source "drivers/staging/qlge/Kconfig"
 
 source "drivers/staging/wfx/Kconfig"
 
-source "drivers/staging/hikey9xx/Kconfig"
-
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 075c979bfe7c..7179cdcaafe7 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -42,4 +42,3 @@ obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/
 obj-$(CONFIG_KPC2000)		+= kpc2000/
 obj-$(CONFIG_QLGE)		+= qlge/
 obj-$(CONFIG_WFX)		+= wfx/
-obj-y				+= hikey9xx/
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
deleted file mode 100644
index 9f53df9068fe..000000000000
--- a/drivers/staging/hikey9xx/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# to be placed at drivers/mfd
-config MFD_HI6421_SPMI
-	tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
-	depends on HAS_IOMEM
-	depends on OF
-	depends on SPMI
-	select MFD_CORE
-	select REGMAP_SPMI
-	help
-	  Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
-	  multi-functions, such as regulators, RTC, codec, Coulomb counter,
-	  etc.
-
-	  This driver includes core APIs _only_. You have to select
-	  individual components like voltage regulators under corresponding
-	  menus in order to enable them.
-	  We communicate with the Hi6421v600 via a SPMI bus.
diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
deleted file mode 100644
index e3108d7dd849..000000000000
--- a/drivers/staging/hikey9xx/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-obj-$(CONFIG_MFD_HI6421_SPMI)		+= hi6421-spmi-pmic.o
diff --git a/drivers/staging/hikey9xx/TODO b/drivers/staging/hikey9xx/TODO
deleted file mode 100644
index 65e7996a3066..000000000000
--- a/drivers/staging/hikey9xx/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-ToDo list:
-
-- Port other drivers needed by Hikey 960/970;
-- Test drivers on Hikey 960;
-- Validate device tree bindings.
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
deleted file mode 100644
index f63ba73c9e33..000000000000
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device driver for regulators in HISI PMIC IC
- *
- * Copyright (c) 2013 Linaro Ltd.
- * Copyright (c) 2011 Hisilicon.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
- */
-
-#include <linux/mfd/core.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-static const struct mfd_cell hi6421v600_devs[] = {
-	{ .name = "hi6421v600-irq", },
-	{ .name = "hi6421v600-regulator", },
-};
-
-static const struct regmap_config regmap_config = {
-	.reg_bits	= 16,
-	.val_bits	= BITS_PER_BYTE,
-	.max_register	= 0xffff,
-	.fast_io	= true
-};
-
-static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct regmap *regmap;
-	int ret;
-
-	regmap = devm_regmap_init_spmi_ext(pdev, &regmap_config);
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
-
-	dev_set_drvdata(&pdev->dev, regmap);
-
-	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
-				   hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
-				   NULL, 0, NULL);
-	if (ret < 0)
-		dev_err(dev, "Failed to add child devices: %d\n", ret);
-
-	return ret;
-}
-
-static const struct of_device_id pmic_spmi_id_table[] = {
-	{ .compatible = "hisilicon,hi6421-spmi" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
-
-static struct spmi_driver hi6421_spmi_pmic_driver = {
-	.driver = {
-		.name	= "hi6421-spmi-pmic",
-		.of_match_table = pmic_spmi_id_table,
-	},
-	.probe	= hi6421_spmi_pmic_probe,
-};
-module_spmi_driver(hi6421_spmi_pmic_driver);
-
-MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
deleted file mode 100644
index 8e355cddd437..000000000000
--- a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
+++ /dev/null
@@ -1,134 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: HiSilicon 6421v600 SPMI PMIC
-
-maintainers:
-  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |
-  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
-  (SPMI) bus. It provides interrupts and power supply.
-
-  The GPIO and interrupt settings are represented as part of the top-level PMIC
-  node.
-
-  The SPMI controller part is provided by
-  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
-
-properties:
-  $nodename:
-    pattern: "pmic@[0-9a-f]"
-
-  compatible:
-    const: hisilicon,hi6421v600-spmi
-
-  reg:
-    maxItems: 1
-
-  '#interrupt-cells':
-    const: 2
-
-  interrupt-controller: true
-
-  gpios:
-    maxItems: 1
-    description: GPIO used for IRQs
-
-  regulators:
-    type: object
-
-    properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
-    patternProperties:
-      '^ldo[0-9]+@[0-9a-f]$':
-        type: object
-
-        $ref: "/schemas/regulator/regulator.yaml#"
-
-required:
-  - compatible
-  - reg
-  - regulators
-
-additionalProperties: false
-
-examples:
-  - |
-    /* pmic properties */
-
-    pmic: pmic@0 {
-      compatible = "hisilicon,hi6421-spmi";
-      reg = <0 0>;
-
-      #interrupt-cells = <2>;
-      interrupt-controller;
-      gpios = <&gpio28 0 0>;
-
-      regulators {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        ldo3: LDO3 {
-          regulator-name = "ldo3";
-          regulator-min-microvolt = <1500000>;
-          regulator-max-microvolt = <2000000>;
-          regulator-boot-on;
-        };
-
-        ldo4: LDO4 {
-          regulator-name = "ldo4";
-          regulator-min-microvolt = <1725000>;
-          regulator-max-microvolt = <1900000>;
-          regulator-boot-on;
-        };
-
-        ldo9: LDO9 {
-          regulator-name = "ldo9";
-          regulator-min-microvolt = <1750000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
-
-        ldo15: LDO15 {
-          regulator-name = "ldo15";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-always-on;
-        };
-
-        ldo16: LDO16 {
-          regulator-name = "ldo16";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-boot-on;
-        };
-
-        ldo17: LDO17 {
-          regulator-name = "ldo17";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-        };
-
-        ldo33: LDO33 {
-          regulator-name = "ldo33";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
-
-        ldo34: LDO34 {
-          regulator-name = "ldo34";
-          regulator-min-microvolt = <2600000>;
-          regulator-max-microvolt = <3300000>;
-        };
-      };
-    };
-- 
2.31.1

Re: [PATCH v10 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging

[Greg Kroah-Hartman]

On Tue, Jun 29, 2021 at 12:31:26PM +0200, Mauro Carvalho Chehab wrote:
> Hi Greg,
> 
> This series contain the final bits needed for the USB3 bus to work
> without staging drivers on Hikey 970.

Thanks for these, I'll look at them after 5.14-rc1 is out.

greg k-h

Re: [PATCH v10 2/5] regulator: hi6421v600-regulator: fix platform drvdata

[Mauro Carvalho Chehab]

Em Tue, 29 Jun 2021 18:48:31 +0800
Axel Lin <axel.lin@ingics.com> escreveu:

> Mauro Carvalho Chehab <mchehab+huawei@kernel.org> 於 2021年6月29日 週二 下午6:31寫道：
> 
> > platform drvdata can't be used inside the regulator driver,
> > as this is already used by the MFD and SPMI drivers.
> >  
> 
> Could you point out which part of the code set the platform drvdata?
> My understanding is the mfd only set dev->platform_data rather than
> dev->driver_data.
> If you mean the dev_set_drvdata() call in hi6421_spmi_pmic_probe, it's the
> parent device of the regulator pdev.

It needs to be double-checked, but I guess the SPMI or the SPMI controller
driver already uses it.

See, there are 5 drivers involved, all of them using private data
and passing data to child drivers, called on the order below:

	spmi
	hisi-spmi-controller
	hi6421-spmi-pmic
	mfd drivers:
		hi6421v600-irq
		hi6421-regulator

If you're in doubt, try to apply this series, and then change the
driver again to use platform data. You'll see that it will stop
booting after initializing the first regulator.

Thanks,
Mauro

Re: [PATCH v10 2/5] regulator: hi6421v600-regulator: fix platform drvdata

[Mauro Carvalho Chehab]

Em Tue, 29 Jun 2021 20:51:01 +0800
Axel Lin <axel.lin@ingics.com> escreveu:

> > If you're in doubt, try to apply this series, and then change the
> > driver again to use platform data. You'll see that it will stop
> > booting after initializing the first regulator.
> >  
> 
> Sorry I don't have this h/w to test.

Then, why do you care? Your patch broke the driver. Changes like
that should be tested on a real hardware, in order to avoid
regressions.

Thanks,
Mauro

Re: [PATCH v10 2/5] regulator: hi6421v600-regulator: fix platform drvdata

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 790 bytes --]

On Tue, Jun 29, 2021 at 12:31:28PM +0200, Mauro Carvalho Chehab wrote:

> platform drvdata can't be used inside the regulator driver,
> as this is already used by the MFD and SPMI drivers.

Can you clarify what exactly is using which platform drvdata already?
This all feels very confused and I can't tell what the problem that's
being fixed is, if it's a real issue or how this fixes it.

>  drivers/misc/hi6421v600-irq.c               |  9 ++--
>  drivers/regulator/hi6421v600-regulator.c    | 49 +++++++++++----------
>  drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 18 +++-----
>  include/linux/mfd/hi6421-spmi-pmic.h        | 25 -----------

I'm especially nervous about the core driver still being in staging
perhaps meaning there's some issue with it doing odd and confusing
things.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH v10 2/5] regulator: hi6421v600-regulator: fix platform drvdata

[Mauro Carvalho Chehab]

Em Tue, 29 Jun 2021 16:11:01 +0100
Mark Brown <broonie@kernel.org> escreveu:

> On Tue, Jun 29, 2021 at 12:31:28PM +0200, Mauro Carvalho Chehab wrote:
> 
> > platform drvdata can't be used inside the regulator driver,
> > as this is already used by the MFD and SPMI drivers.  
> 
> Can you clarify what exactly is using which platform drvdata already?
> This all feels very confused and I can't tell what the problem that's
> being fixed is, if it's a real issue or how this fixes it.

I don't remember the dirty details anymore... It has been almost a year
since when I started doing that. The SPMI controller driver left staging
8 months ago.

I guess it is related with passing the parent's device to
devm_regulator_register() at the hi6421v600-regulator driver:

	struct regulator_config config = { };
...
	config.dev = pdev->dev.parent;
...
	rdev = devm_regulator_register(dev, &info->desc, &config);

This is needed by SPMI bus and the SPMI controller in order to use the 
right platform data when talking to the hardware.

> >  drivers/misc/hi6421v600-irq.c               |  9 ++--
> >  drivers/regulator/hi6421v600-regulator.c    | 49 +++++++++++----------
> >  drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 18 +++-----
> >  include/linux/mfd/hi6421-spmi-pmic.h        | 25 -----------  
> 
> I'm especially nervous about the core driver still being in staging
> perhaps meaning there's some issue with it doing odd and confusing
> things.

The only missing part in staging is the MFD driver. At the current way,
it is very simple (71 lines in total): it just declares a regmap, and has 
a single function on it:

	static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
	{
		struct device *dev = &pdev->dev;
		int ret;
		struct hi6421_spmi_pmic *ddata;
		ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
		if (!ddata)
			return -ENOMEM;
	
		ddata->regmap = devm_regmap_init_spmi_ext(pdev, &regmap_config);
		if (IS_ERR(ddata->regmap))
			return PTR_ERR(ddata->regmap);
	
		ddata->dev = dev;
	
		dev_set_drvdata(&pdev->dev, ddata);

		ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
					   hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
					   NULL, 0, NULL);
		if (ret < 0)
			dev_err(dev, "Failed to add child devices: %d\n", ret);

		return ret;
	}

You can see the full driver's code at:
	https://lore.kernel.org/lkml/8d871e2ccc544d11959c16d8312dbf03dd01b1c8.1624962269.git.mchehab+huawei@kernel.org/#Z30drivers:mfd:hi6421-spmi-pmic.c

I'm not aware of anything left preventing it to leave staging.

Thanks,
Mauro

Re: [PATCH v10 2/5] regulator: hi6421v600-regulator: fix platform drvdata

[Mauro Carvalho Chehab]

Em Tue, 29 Jun 2021 16:11:01 +0100
Mark Brown <broonie@kernel.org> escreveu:

> On Tue, Jun 29, 2021 at 12:31:28PM +0200, Mauro Carvalho Chehab wrote:
> 
> > platform drvdata can't be used inside the regulator driver,
> > as this is already used by the MFD and SPMI drivers.  
> 
> Can you clarify what exactly is using which platform drvdata already?
> This all feels very confused and I can't tell what the problem that's
> being fixed is, if it's a real issue or how this fixes it.

It turns that the problem was not related to any bad usage of
platform data by MFD/SPMI drivers. There used to have a need to access
the SPMI privdata before we added support for regmap, but this is
long gone.

The problem is just that the Axel's patch was setting the platform
drvdata, but the internal logic was addressing a different memory
region (from the SPMI driver), because hi6421v600-regulator driver sets
the config.dev as:

	config.dev = pdev->dev.parent;

The config.dev needs to point to the SPMI driver, in order to ensure that 
regulator_register() will access the proper OF data from the SPMI
devicetree descriptors here:

	init_data = regulator_of_get_init_data(dev, regulator_desc, config,
					       &rdev->dev.of_node);

With the Axel's fixup patch:

	https://lore.kernel.org/lkml/20210630100911.5e866629@coco.lan/T/#t

the regression was solved.

Thanks,
Mauro

Re: [PATCH v10 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging

[Mauro Carvalho Chehab]

Em Tue, 29 Jun 2021 12:43:47 +0200
Greg Kroah-Hartman <gregkh@linuxfoundation.org> escreveu:

> On Tue, Jun 29, 2021 at 12:31:26PM +0200, Mauro Carvalho Chehab wrote:
> > Hi Greg,
> > 
> > This series contain the final bits needed for the USB3 bus to work
> > without staging drivers on Hikey 970.  
> 
> Thanks for these, I'll look at them after 5.14-rc1 is out.

Thanks!

I'll submit a v11 soon enough.

We're opting to solve a regression at the regulator driver using a 
different approach than on v10. 

We need to sync with Mark if the fixup patch from Axel [1] will be 
merged via the regulator's tree or together with this series, as there 
will be one (trivial) conflict, as one of the patches in this series
drop a priv struct, defined on a header that will also be dropped,
replacing it by struct regmap.

[1] https://lore.kernel.org/lkml/20210630100911.5e866629@coco.lan/T/#m598ee2e31ecdf560c3b752fd8b0518131f4bf123

Thanks,
Mauro

Re: [PATCH v10 3/5] mfd: hi6421-spmi-pmic: move driver from staging

[Rob Herring]

On Tue, 29 Jun 2021 12:31:29 +0200, Mauro Carvalho Chehab wrote:
> This driver is ready for mainstream. So, move it out of staging.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../mfd/hisilicon,hi6421-spmi-pmic.yaml       | 134 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  drivers/mfd/Kconfig                           |  16 +++
>  drivers/mfd/Makefile                          |   1 +
>  drivers/mfd/hi6421-spmi-pmic.c                |  66 +++++++++
>  drivers/staging/Kconfig                       |   2 -
>  drivers/staging/Makefile                      |   1 -
>  drivers/staging/hikey9xx/Kconfig              |  19 ---
>  drivers/staging/hikey9xx/Makefile             |   3 -
>  drivers/staging/hikey9xx/TODO                 |   5 -
>  drivers/staging/hikey9xx/hi6421-spmi-pmic.c   |  66 ---------
>  .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 134 ------------------
>  12 files changed, 224 insertions(+), 230 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
>  create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
>  delete mode 100644 drivers/staging/hikey9xx/Kconfig
>  delete mode 100644 drivers/staging/hikey9xx/Makefile
>  delete mode 100644 drivers/staging/hikey9xx/TODO
>  delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
>  delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.example.dt.yaml:0:0: /example-0/pmic@0: failed to match any schema with compatible: ['hisilicon,hi6421-spmi']
\ndoc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1498291

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.