linux-sunxi.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees
@ 2021-05-14 13:43 Tobias Schramm
  2021-05-14 13:43 ` [PATCH v3 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts Tobias Schramm
                   ` (7 more replies)
  0 siblings, 8 replies; 11+ messages in thread
From: Tobias Schramm @ 2021-05-14 13:43 UTC (permalink / raw)
  To: Jernej Škrabec, Rob Herring, devicetree
  Cc: Maxime Ripard, Chen-Yu Tsai, linux-arm-kernel, linux-sunxi,
	linux-kernel, Tobias Schramm

The Allwinner V3s/V3 SoCs feature quite a few peripherals that have good
driver support but yet are nowhere to be found in the SoCs dts.
This patchset adds the DMA controller, the relevant DMA properties for all
peripherals supporting DMA, the integrated analog codec and - for the
Allwinner V3 SoC - also the I2S interface.
I've included all of those changes in one patchset since they do all
depend on addition of the DMA controller.
All changes have been tested in a recent project of mine using a Sochip S3
(a rebranded Allwinner V3) and are confirmed working.

This is v3 of this patchset.

Cheers,
Tobias

Changelog:
  v2:
    - add v3/v3s specific compatible strings
    - fix v3s audio codec analog frontend compatible
    - fix an I2S -> I2C typo

  v3:
    - fix yaml list indentation in allwinner,sun8i-a23-codec-analog.yaml

Tobias Schramm (7):
  ARM: dts: sun8i: v3s: add DMA controller to v3s dts
  ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
  ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
  ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for
    Allwinner V3
  ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
  dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
  ARM: dts: sun8i: V3: add I2S interface to V3 dts

 .../sound/allwinner,sun4i-a10-i2s.yaml        |  3 ++
 .../allwinner,sun8i-a23-codec-analog.yaml     |  9 +++--
 arch/arm/boot/dts/sun8i-v3.dtsi               | 31 +++++++++++++++
 arch/arm/boot/dts/sun8i-v3s.dtsi              | 39 +++++++++++++++++++
 4 files changed, 79 insertions(+), 3 deletions(-)

-- 
2.31.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v3 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts
  2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm
@ 2021-05-14 13:43 ` Tobias Schramm
  2021-05-14 13:44 ` [PATCH v3 2/7] ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA Tobias Schramm
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Tobias Schramm @ 2021-05-14 13:43 UTC (permalink / raw)
  To: Jernej Škrabec, Rob Herring, devicetree
  Cc: Maxime Ripard, Chen-Yu Tsai, linux-arm-kernel, linux-sunxi,
	linux-kernel, Tobias Schramm

The Allwinner V3s and V3 feature a DMA controller.
This commit adds it to the V3s dtsi.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index eb4cb63fef13..f0296ab46137 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -172,6 +173,15 @@ nmi_intc: interrupt-controller@1c000d0 {
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-v3s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
 		tcon0: lcd-controller@1c0c000 {
 			compatible = "allwinner,sun8i-v3s-tcon";
 			reg = <0x01c0c000 0x1000>;
-- 
2.31.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v3 2/7] ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA
  2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm
  2021-05-14 13:43 ` [PATCH v3 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts Tobias Schramm
@ 2021-05-14 13:44 ` Tobias Schramm
  2021-05-14 13:44 ` [PATCH v3 3/7] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts Tobias Schramm
                   ` (5 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Tobias Schramm @ 2021-05-14 13:44 UTC (permalink / raw)
  To: Jernej Škrabec, Rob Herring, devicetree
  Cc: Maxime Ripard, Chen-Yu Tsai, linux-arm-kernel, linux-sunxi,
	linux-kernel, Tobias Schramm

This commit adds DMA properties to all peripherals supporting DMA on the
Allwinner V3s, enabling accelerated data transfer to them.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index f0296ab46137..3eaa8703e2ac 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -285,6 +285,8 @@ crypto@1c15000 {
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_CE>;
 			reset-names = "ahb";
 		};
@@ -446,6 +448,8 @@ uart0: serial@1c28000 {
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
@@ -457,6 +461,8 @@ uart1: serial@1c28400 {
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_UART1>;
 			status = "disabled";
 		};
@@ -468,6 +474,8 @@ uart2: serial@1c28800 {
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
 			resets = <&ccu RST_BUS_UART2>;
 			pinctrl-0 = <&uart2_pins>;
 			pinctrl-names = "default";
@@ -547,6 +555,8 @@ spi0: spi@1c68000 {
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi0_pins>;
 			resets = <&ccu RST_BUS_SPI0>;
-- 
2.31.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v3 3/7] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts
  2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm
  2021-05-14 13:43 ` [PATCH v3 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts Tobias Schramm
  2021-05-14 13:44 ` [PATCH v3 2/7] ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA Tobias Schramm
@ 2021-05-14 13:44 ` Tobias Schramm
  2021-05-14 13:44 ` [PATCH v3 4/7] ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 Tobias Schramm
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Tobias Schramm @ 2021-05-14 13:44 UTC (permalink / raw)
  To: Jernej Škrabec, Rob Herring, devicetree
  Cc: Maxime Ripard, Chen-Yu Tsai, linux-arm-kernel, linux-sunxi,
	linux-kernel, Tobias Schramm

The Allwinner V3s and V3 SoCs feature an integrated analog audio codec.
Additionally both have an analog frontend with mixers and amplifiers for
the codec.
This commit adds both, the analog codec and its frontend to the V3s dtsi.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 3eaa8703e2ac..236cf45bba91 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -441,6 +441,25 @@ lradc: lradc@1c22800 {
 			status = "disabled";
 		};
 
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3s-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		codec_analog: codec-analog@1c23000 {
+			compatible = "allwinner,sun8i-v3s-codec-analog";
+			reg = <0x01c23000 0x4>;
+		};
+
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-- 
2.31.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v3 4/7] ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
  2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm
                   ` (2 preceding siblings ...)
  2021-05-14 13:44 ` [PATCH v3 3/7] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts Tobias Schramm
@ 2021-05-14 13:44 ` Tobias Schramm
  2021-05-18  1:29   ` Rob Herring
  2021-05-14 13:44 ` [PATCH v3 5/7] ARM: dts: sun8i: V3: add codec analog frontend to V3 dts Tobias Schramm
                   ` (3 subsequent siblings)
  7 siblings, 1 reply; 11+ messages in thread
From: Tobias Schramm @ 2021-05-14 13:44 UTC (permalink / raw)
  To: Jernej Škrabec, Rob Herring, devicetree
  Cc: Maxime Ripard, Chen-Yu Tsai, linux-arm-kernel, linux-sunxi,
	linux-kernel, Tobias Schramm

The analog codec frontend of the Allwinner V3 is compatible with the
analog codec frontend used on the Allwinner H3.
This patch adds a compatible string for the analog codec frontend on the
Allwinner V3 SoC.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 .../bindings/sound/allwinner,sun8i-a23-codec-analog.yaml | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
index 9718358826ab..26eca21e1f0f 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml
@@ -12,12 +12,15 @@ maintainers:
 
 properties:
   compatible:
-    enum:
+    oneOf:
       # FIXME: This is documented in the PRCM binding, but needs to be
       # migrated here at some point
       # - allwinner,sun8i-a23-codec-analog
-      - allwinner,sun8i-h3-codec-analog
-      - allwinner,sun8i-v3s-codec-analog
+      - const: allwinner,sun8i-h3-codec-analog
+      - items:
+          - const: allwinner,sun8i-v3-codec-analog
+          - const: allwinner,sun8i-h3-codec-analog
+      - const: allwinner,sun8i-v3s-codec-analog
 
   reg:
     maxItems: 1
-- 
2.31.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v3 5/7] ARM: dts: sun8i: V3: add codec analog frontend to V3 dts
  2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm
                   ` (3 preceding siblings ...)
  2021-05-14 13:44 ` [PATCH v3 4/7] ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 Tobias Schramm
@ 2021-05-14 13:44 ` Tobias Schramm
  2021-05-14 13:44 ` [PATCH v3 6/7] dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible Tobias Schramm
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Tobias Schramm @ 2021-05-14 13:44 UTC (permalink / raw)
  To: Jernej Škrabec, Rob Herring, devicetree
  Cc: Maxime Ripard, Chen-Yu Tsai, linux-arm-kernel, linux-sunxi,
	linux-kernel, Tobias Schramm

The Allwinner V3 SoC has a different analog codec frontend than the V3s
SoC. The frontend used on the V3 SoC is compatible with the on used in
the Allwinner H3 SoC.
This patch adds the corresponding node to the Allwinner V3 dtsi.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 arch/arm/boot/dts/sun8i-v3.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi
index c279e13583ba..8af790d286b9 100644
--- a/arch/arm/boot/dts/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3.dtsi
@@ -9,6 +9,11 @@ &ccu {
 	compatible = "allwinner,sun8i-v3-ccu";
 };
 
+&codec_analog {
+	compatible = "allwinner,sun8i-v3-codec-analog",
+		     "allwinner,sun8i-h3-codec-analog";
+};
+
 &emac {
 	/delete-property/ phy-handle;
 	/delete-property/ phy-mode;
-- 
2.31.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v3 6/7] dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
  2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm
                   ` (4 preceding siblings ...)
  2021-05-14 13:44 ` [PATCH v3 5/7] ARM: dts: sun8i: V3: add codec analog frontend to V3 dts Tobias Schramm
@ 2021-05-14 13:44 ` Tobias Schramm
  2021-05-18  1:29   ` Rob Herring
  2021-05-14 13:44 ` [PATCH v3 7/7] ARM: dts: sun8i: V3: add I2S interface to V3 dts Tobias Schramm
  2021-05-18 15:19 ` [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Maxime Ripard
  7 siblings, 1 reply; 11+ messages in thread
From: Tobias Schramm @ 2021-05-14 13:44 UTC (permalink / raw)
  To: Jernej Škrabec, Rob Herring, devicetree
  Cc: Maxime Ripard, Chen-Yu Tsai, linux-arm-kernel, linux-sunxi,
	linux-kernel, Tobias Schramm

The I2S peripheral of the Allwinner V3 SoC is compatible with the one
found in the Allwinner H3 SoC.
This patch adds a compatible string for it.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 .../devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml     | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
index a16e37b01e1d..39b66e9ce3e3 100644
--- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
@@ -20,6 +20,9 @@ properties:
       - const: allwinner,sun6i-a31-i2s
       - const: allwinner,sun8i-a83t-i2s
       - const: allwinner,sun8i-h3-i2s
+      - items:
+          - const: allwinner,sun8i-v3-i2s
+          - const: allwinner,sun8i-h3-i2s
       - const: allwinner,sun50i-a64-codec-i2s
       - items:
           - const: allwinner,sun50i-a64-i2s
-- 
2.31.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v3 7/7] ARM: dts: sun8i: V3: add I2S interface to V3 dts
  2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm
                   ` (5 preceding siblings ...)
  2021-05-14 13:44 ` [PATCH v3 6/7] dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible Tobias Schramm
@ 2021-05-14 13:44 ` Tobias Schramm
  2021-05-18 15:19 ` [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Maxime Ripard
  7 siblings, 0 replies; 11+ messages in thread
From: Tobias Schramm @ 2021-05-14 13:44 UTC (permalink / raw)
  To: Jernej Škrabec, Rob Herring, devicetree
  Cc: Maxime Ripard, Chen-Yu Tsai, linux-arm-kernel, linux-sunxi,
	linux-kernel, Tobias Schramm

The Allwinner V3 SoC features an I2S interface. The I2S peripheral is
identical to that in the Allwinner H3 SoC.
This commit adds it to the Allwinner V3 dts.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
---
 arch/arm/boot/dts/sun8i-v3.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3.dtsi b/arch/arm/boot/dts/sun8i-v3.dtsi
index 8af790d286b9..3698e024d604 100644
--- a/arch/arm/boot/dts/sun8i-v3.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3.dtsi
@@ -1,10 +1,31 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
  */
 
 #include "sun8i-v3s.dtsi"
 
+/ {
+	soc {
+			i2s0: i2s@1c22000 {
+				#sound-dai-cells = <0>;
+				compatible = "allwinner,sun8i-v3-i2s",
+					     "allwinner,sun8i-h3-i2s";
+				reg = <0x01c22000 0x400>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+				clock-names = "apb", "mod";
+				dmas = <&dma 3>, <&dma 3>;
+				dma-names = "rx", "tx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2s0_pins>;
+				resets = <&ccu RST_BUS_I2S0>;
+				status = "disabled";
+			};
+	};
+};
+
 &ccu {
 	compatible = "allwinner,sun8i-v3-ccu";
 };
@@ -30,6 +51,11 @@ external_mdio: mdio@2 {
 &pio {
 	compatible = "allwinner,sun8i-v3-pinctrl";
 
+	i2s0_pins: i2s0-pins {
+		pins = "PG10", "PG11", "PG12", "PG13";
+		function = "i2s";
+	};
+
 	uart1_pg_pins: uart1-pg-pins {
 		pins = "PG6", "PG7";
 		function = "uart1";
-- 
2.31.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v3 4/7] ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3
  2021-05-14 13:44 ` [PATCH v3 4/7] ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 Tobias Schramm
@ 2021-05-18  1:29   ` Rob Herring
  0 siblings, 0 replies; 11+ messages in thread
From: Rob Herring @ 2021-05-18  1:29 UTC (permalink / raw)
  To: Tobias Schramm
  Cc: linux-sunxi, Chen-Yu Tsai, linux-arm-kernel, Maxime Ripard,
	devicetree, linux-kernel, Jernej Škrabec, Rob Herring

On Fri, 14 May 2021 15:44:02 +0200, Tobias Schramm wrote:
> The analog codec frontend of the Allwinner V3 is compatible with the
> analog codec frontend used on the Allwinner H3.
> This patch adds a compatible string for the analog codec frontend on the
> Allwinner V3 SoC.
> 
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
> ---
>  .../bindings/sound/allwinner,sun8i-a23-codec-analog.yaml | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v3 6/7] dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible
  2021-05-14 13:44 ` [PATCH v3 6/7] dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible Tobias Schramm
@ 2021-05-18  1:29   ` Rob Herring
  0 siblings, 0 replies; 11+ messages in thread
From: Rob Herring @ 2021-05-18  1:29 UTC (permalink / raw)
  To: Tobias Schramm
  Cc: linux-kernel, Jernej Škrabec, Rob Herring, linux-arm-kernel,
	devicetree, linux-sunxi, Maxime Ripard, Chen-Yu Tsai

On Fri, 14 May 2021 15:44:04 +0200, Tobias Schramm wrote:
> The I2S peripheral of the Allwinner V3 SoC is compatible with the one
> found in the Allwinner H3 SoC.
> This patch adds a compatible string for it.
> 
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
> ---
>  .../devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml     | 3 +++
>  1 file changed, 3 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees
  2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm
                   ` (6 preceding siblings ...)
  2021-05-14 13:44 ` [PATCH v3 7/7] ARM: dts: sun8i: V3: add I2S interface to V3 dts Tobias Schramm
@ 2021-05-18 15:19 ` Maxime Ripard
  7 siblings, 0 replies; 11+ messages in thread
From: Maxime Ripard @ 2021-05-18 15:19 UTC (permalink / raw)
  To: Tobias Schramm
  Cc: Jernej Škrabec, Rob Herring, devicetree, Chen-Yu Tsai,
	linux-arm-kernel, linux-sunxi, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 724 bytes --]

On Fri, May 14, 2021 at 03:43:58PM +0200, Tobias Schramm wrote:
> The Allwinner V3s/V3 SoCs feature quite a few peripherals that have good
> driver support but yet are nowhere to be found in the SoCs dts.
> This patchset adds the DMA controller, the relevant DMA properties for all
> peripherals supporting DMA, the integrated analog codec and - for the
> Allwinner V3 SoC - also the I2S interface.
> I've included all of those changes in one patchset since they do all
> depend on addition of the DMA controller.
> All changes have been tested in a recent project of mine using a Sochip S3
> (a rebranded Allwinner V3) and are confirmed working.
> 
> This is v3 of this patchset.

Applied all, thanks
Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2021-05-18 15:19 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-14 13:43 [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Tobias Schramm
2021-05-14 13:43 ` [PATCH v3 1/7] ARM: dts: sun8i: v3s: add DMA controller to v3s dts Tobias Schramm
2021-05-14 13:44 ` [PATCH v3 2/7] ARM: dts: sun8i: v3s: add DMA properties to peripherals supporting DMA Tobias Schramm
2021-05-14 13:44 ` [PATCH v3 3/7] ARM: dts: sun8i: v3s: add analog codec and frontend to v3s dts Tobias Schramm
2021-05-14 13:44 ` [PATCH v3 4/7] ASoC: dt-bindings: sun8i-a23-codec-analog: add compatible for Allwinner V3 Tobias Schramm
2021-05-18  1:29   ` Rob Herring
2021-05-14 13:44 ` [PATCH v3 5/7] ARM: dts: sun8i: V3: add codec analog frontend to V3 dts Tobias Schramm
2021-05-14 13:44 ` [PATCH v3 6/7] dt-bindings: sound: sun4i-i2s: add Allwinner V3 I2S compatible Tobias Schramm
2021-05-18  1:29   ` Rob Herring
2021-05-14 13:44 ` [PATCH v3 7/7] ARM: dts: sun8i: V3: add I2S interface to V3 dts Tobias Schramm
2021-05-18 15:19 ` [PATCH v3 0/7] Add missing peripherals to Allwinner V3s/V3 device trees Maxime Ripard

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).