From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 9D2C4257D for ; Mon, 12 Sep 2022 00:01:52 +0000 (UTC) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 9CFE61713; Sun, 11 Sep 2022 17:01:58 -0700 (PDT) Received: from slackpad.fritz.box (unknown [172.31.20.19]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 958043F73B; Sun, 11 Sep 2022 17:01:49 -0700 (PDT) From: Andre Przywara To: Jernej Skrabec , Samuel Holland , Chen-Yu Tsai , Kishon Vijay Abraham I , Vinod Koul Cc: Rob Herring , Krzysztof Kozlowski , Greg Kroah-Hartman , linux-phy@lists.infradead.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, Karl Kurbjun , Icenowy Zheng Subject: [PATCH 3/7] phy: sun4i-usb: Introduce port2 SIDDQ quirk Date: Mon, 12 Sep 2022 00:59:41 +0100 Message-Id: <20220911235945.6635-4-andre.przywara@arm.com> X-Mailer: git-send-email 2.35.3 In-Reply-To: <20220911235945.6635-1-andre.przywara@arm.com> References: <20220911235945.6635-1-andre.przywara@arm.com> Precedence: bulk X-Mailing-List: linux-sunxi@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit At least the Allwinner H616 SoC requires a weird quirk to make most USB PHYs work: Only port2 works out of the box, but all other ports need some help from this port2 to work correctly: The CLK_BUS_PHY2 and RST_USB_PHY2 clock and reset need to be enabled, and the SIDDQ bit in the PMU PHY control register needs to be cleared. For this register to be accessible, CLK_BUS_ECHI2 needs to be ungated. Don't ask .... Instead of disguising this as some generic feature, treat it more like a quirk (what it really is): If the quirk bit is set, and we initialise a PHY other than PHY2, ungate this one special clock, and clear the SIDDQ bit. We also pick the clock and reset from PHY2 and enable them as well. Signed-off-by: Andre Przywara --- drivers/phy/allwinner/phy-sun4i-usb.c | 59 +++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index d5f3b42eb8ce..f094a4cd7cbc 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -120,6 +120,7 @@ struct sun4i_usb_phy_cfg { u8 phyctl_offset; bool dedicated_clocks; bool phy0_dual_route; + bool needs_phy2_siddq; int missing_phys; }; @@ -289,6 +290,50 @@ static int sun4i_usb_phy_init(struct phy *_phy) return ret; } + /* Some PHYs on some SoCs need the help of PHY2 to work. */ + if (data->cfg->needs_phy2_siddq && phy->index != 2) { + struct sun4i_usb_phy *phy2 = &data->phys[2]; + + ret = clk_prepare_enable(phy2->clk); + if (ret) { + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk2); + clk_disable_unprepare(phy->clk); + return ret; + } + + ret = reset_control_deassert(phy2->reset); + if (ret) { + clk_disable_unprepare(phy2->clk); + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk2); + clk_disable_unprepare(phy->clk); + return ret; + } + + /* + * This extra clock is just needed to access the + * REG_HCI_PHY_CTL PMU register for PHY2. + */ + ret = clk_prepare_enable(phy2->clk2); + if (ret) { + reset_control_assert(phy2->reset); + clk_disable_unprepare(phy2->clk); + reset_control_assert(phy->reset); + clk_disable_unprepare(phy->clk2); + clk_disable_unprepare(phy->clk); + return ret; + } + + if (phy2->pmu && data->cfg->hci_phy_ctl_clear) { + val = readl(phy2->pmu + REG_HCI_PHY_CTL); + val &= ~data->cfg->hci_phy_ctl_clear; + writel(val, phy2->pmu + REG_HCI_PHY_CTL); + } + + clk_disable_unprepare(phy->clk2); + } + if (phy->pmu && data->cfg->hci_phy_ctl_clear) { val = readl(phy->pmu + REG_HCI_PHY_CTL); val &= ~data->cfg->hci_phy_ctl_clear; @@ -354,6 +399,13 @@ static int sun4i_usb_phy_exit(struct phy *_phy) data->phy0_init = false; } + if (data->cfg->needs_phy2_siddq && phy->index != 2) { + struct sun4i_usb_phy *phy2 = &data->phys[2]; + + clk_disable_unprepare(phy2->clk); + reset_control_assert(phy2->reset); + } + sun4i_usb_phy_passby(phy, 0); reset_control_assert(phy->reset); clk_disable_unprepare(phy->clk2); @@ -785,6 +837,13 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) dev_err(dev, "failed to get clock %s\n", name); return PTR_ERR(phy->clk2); } + } else { + snprintf(name, sizeof(name), "pmu%d_clk", i); + phy->clk2 = devm_clk_get_optional(dev, name); + if (IS_ERR(phy->clk2)) { + dev_err(dev, "failed to get clock %s\n", name); + return PTR_ERR(phy->clk2); + } } snprintf(name, sizeof(name), "usb%d_reset", i); -- 2.35.3