linux-sunxi.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/3] media: sunxi: Add H6 deinterlace driver
@ 2022-11-01 12:31 Jernej Skrabec
  2022-11-01 12:31 ` [PATCH 1/3] media: dt-bindings: media: Add Allwinner H6 Deinterlace binding Jernej Skrabec
                   ` (3 more replies)
  0 siblings, 4 replies; 11+ messages in thread
From: Jernej Skrabec @ 2022-11-01 12:31 UTC (permalink / raw)
  To: mchehab, hverkuil-cisco
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, samuel, linux-media,
	devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
	Jernej Skrabec

This series implements driver for H6 deinterlace core, which is
newer version of core, covered by sun8i-di (v2.3). Contrary to
older one, it doesn't support scaling, but it supports iommu,
has additional motion compensated deinterlacing algorithm and
supports different pixel formats.

v4l2-compliance 1.23.0-4961, 64 bits, 64-bit time_t
v4l2-compliance SHA: f86484524f32 2022-10-21 10:08:58

Compliance test for sun50i-di device /dev/video0:

Driver Info:
        Driver name      : sun50i-di
        Card type        : sun50i-di
        Bus info         : platform:sun50i-di
        Driver version   : 6.1.0
        Capabilities     : 0x84208000
                Video Memory-to-Memory
                Streaming
                Extended Pix Format
                Device Capabilities
        Device Caps      : 0x04208000
                Video Memory-to-Memory
                Streaming
                Extended Pix Format

Required ioctls:
        test VIDIOC_QUERYCAP: OK
        test invalid ioctls: OK

Allow for multiple opens:
        test second /dev/video0 open: OK
        test VIDIOC_QUERYCAP: OK
        test VIDIOC_G/S_PRIORITY: OK
        test for unlimited opens: OK

Debug ioctls:
        test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
        test VIDIOC_LOG_STATUS: OK (Not Supported)

Input ioctls:
        test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
        test VIDIOC_ENUMAUDIO: OK (Not Supported)
        test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
        test VIDIOC_G/S_AUDIO: OK (Not Supported)
        Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
        test VIDIOC_G/S_MODULATOR: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_ENUMAUDOUT: OK (Not Supported)
        test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
        test VIDIOC_G/S_AUDOUT: OK (Not Supported)
        Outputs: 0 Audio Outputs: 0 Modulators: 0

Input/Output configuration ioctls:
        test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
        test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
        test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
        test VIDIOC_G/S_EDID: OK (Not Supported)

Control ioctls:
        test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
        test VIDIOC_QUERYCTRL: OK (Not Supported)
        test VIDIOC_G/S_CTRL: OK (Not Supported)
        test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
        test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
        test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
        Standard Controls: 0 Private Controls: 0

Format ioctls:
        test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
        test VIDIOC_G/S_PARM: OK (Not Supported)
        test VIDIOC_G_FBUF: OK (Not Supported)
        test VIDIOC_G_FMT: OK
        test VIDIOC_TRY_FMT: OK
        test VIDIOC_S_FMT: OK
        test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
        test Cropping: OK (Not Supported)
        test Composing: OK (Not Supported)
        test Scaling: OK (Not Supported)

Codec ioctls:
        test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
        test VIDIOC_G_ENC_INDEX: OK (Not Supported)
        test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
        test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
        test VIDIOC_EXPBUF: OK
        test Requests: OK (Not Supported)

Total for sun50i-di device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 0

Best regards,
Jernej

Jernej Skrabec (3):
  media: dt-bindings: media: Add Allwinner H6 Deinterlace binding
  media: sunxi: Add H6 deinterlace driver
  arm64: dts: allwinner: h6: Add deinterlace node

 .../allwinner,sun50i-h6-deinterlace.yaml      |   74 ++
 MAINTAINERS                                   |    4 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |   12 +
 drivers/media/platform/sunxi/Kconfig          |    1 +
 drivers/media/platform/sunxi/Makefile         |    1 +
 .../media/platform/sunxi/sun50i-di/Kconfig    |   15 +
 .../media/platform/sunxi/sun50i-di/Makefile   |    2 +
 .../platform/sunxi/sun50i-di/sun50i-di.c      | 1142 +++++++++++++++++
 .../platform/sunxi/sun50i-di/sun50i-di.h      |  175 +++
 9 files changed, 1425 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.yaml
 create mode 100644 drivers/media/platform/sunxi/sun50i-di/Kconfig
 create mode 100644 drivers/media/platform/sunxi/sun50i-di/Makefile
 create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.c
 create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.h

--
2.38.1


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 1/3] media: dt-bindings: media: Add Allwinner H6 Deinterlace binding
  2022-11-01 12:31 [PATCH 0/3] media: sunxi: Add H6 deinterlace driver Jernej Skrabec
@ 2022-11-01 12:31 ` Jernej Skrabec
  2022-11-02 17:14   ` Rob Herring
  2022-11-05  3:02   ` Samuel Holland
  2022-11-01 12:32 ` [PATCH 2/3] media: sunxi: Add H6 deinterlace driver Jernej Skrabec
                   ` (2 subsequent siblings)
  3 siblings, 2 replies; 11+ messages in thread
From: Jernej Skrabec @ 2022-11-01 12:31 UTC (permalink / raw)
  To: mchehab, hverkuil-cisco
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, samuel, linux-media,
	devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
	Jernej Skrabec

Allwinner H6 Deinterlace core is used for deinterlacing interlaced video
content.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
 .../allwinner,sun50i-h6-deinterlace.yaml      | 74 +++++++++++++++++++
 1 file changed, 74 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.yaml

diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.yaml
new file mode 100644
index 000000000000..521f58559444
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun50i-h6-deinterlace.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 Deinterlace
+
+maintainers:
+  - Jernej Skrabec <jernej.skrabec@gmail.com>
+  - Chen-Yu Tsai <wens@csie.org>
+  - Samuel Holland <samuel@sholland.org>
+
+description: |-
+  The Allwinner H6 has a deinterlace core used for deinterlacing
+  interlaced video content.
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-deinterlace
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Deinterlace interface clock
+      - description: Deinterlace module clock
+      - description: Deinterlace DRAM clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    deinterlace@1420000 {
+        compatible = "allwinner,sun50i-h6-deinterlace";
+        reg = <0x01420000 0x2000>;
+        clocks = <&ccu CLK_BUS_DEINTERLACE>,
+                 <&ccu CLK_DEINTERLACE>,
+                 <&ccu CLK_MBUS_DEINTERLACE>;
+        clock-names = "bus", "mod", "ram";
+        resets = <&ccu RST_BUS_DEINTERLACE>;
+        interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+        iommus = <&iommu 2>;
+    };
+
+...
-- 
2.38.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH 2/3] media: sunxi: Add H6 deinterlace driver
  2022-11-01 12:31 [PATCH 0/3] media: sunxi: Add H6 deinterlace driver Jernej Skrabec
  2022-11-01 12:31 ` [PATCH 1/3] media: dt-bindings: media: Add Allwinner H6 Deinterlace binding Jernej Skrabec
@ 2022-11-01 12:32 ` Jernej Skrabec
  2022-11-05  3:28   ` Samuel Holland
  2022-11-01 12:32 ` [PATCH 3/3] arm64: dts: allwinner: h6: Add deinterlace node Jernej Skrabec
  2022-11-04 11:33 ` [PATCH 0/3] media: sunxi: Add H6 deinterlace driver Hans Verkuil
  3 siblings, 1 reply; 11+ messages in thread
From: Jernej Skrabec @ 2022-11-01 12:32 UTC (permalink / raw)
  To: mchehab, hverkuil-cisco
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, samuel, linux-media,
	devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
	Jernej Skrabec

This driver covers H6 deinterlace core, which is marked in vendor driver
as v2.3. Contrary to older cores, covered by sun8i-di, it doesn't
support scaling, but it supports iommu and has additional motion
compensated deinterlacing algorithm.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
 MAINTAINERS                                   |    4 +-
 drivers/media/platform/sunxi/Kconfig          |    1 +
 drivers/media/platform/sunxi/Makefile         |    1 +
 .../media/platform/sunxi/sun50i-di/Kconfig    |   15 +
 .../media/platform/sunxi/sun50i-di/Makefile   |    2 +
 .../platform/sunxi/sun50i-di/sun50i-di.c      | 1142 +++++++++++++++++
 .../platform/sunxi/sun50i-di/sun50i-di.h      |  175 +++
 7 files changed, 1339 insertions(+), 1 deletion(-)
 create mode 100644 drivers/media/platform/sunxi/sun50i-di/Kconfig
 create mode 100644 drivers/media/platform/sunxi/sun50i-di/Makefile
 create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.c
 create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.h

diff --git a/MAINTAINERS b/MAINTAINERS
index cf0f18502372..df35acab10fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5781,12 +5781,14 @@ M:	"Maciej W. Rozycki" <macro@orcam.me.uk>
 S:	Maintained
 F:	drivers/net/fddi/defza.*
 
-DEINTERLACE DRIVERS FOR ALLWINNER H3
+DEINTERLACE DRIVERS FOR ALLWINNER SOCS
 M:	Jernej Skrabec <jernej.skrabec@gmail.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.yaml
 F:	Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
+F:	drivers/media/platform/sunxi/sun50i-di/
 F:	drivers/media/platform/sunxi/sun8i-di/
 
 DELL LAPTOP DRIVER
diff --git a/drivers/media/platform/sunxi/Kconfig b/drivers/media/platform/sunxi/Kconfig
index 2dd15083a1d9..413a79d23625 100644
--- a/drivers/media/platform/sunxi/Kconfig
+++ b/drivers/media/platform/sunxi/Kconfig
@@ -7,4 +7,5 @@ source "drivers/media/platform/sunxi/sun6i-csi/Kconfig"
 source "drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig"
 source "drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig"
 source "drivers/media/platform/sunxi/sun8i-di/Kconfig"
+source "drivers/media/platform/sunxi/sun50i-di/Kconfig"
 source "drivers/media/platform/sunxi/sun8i-rotate/Kconfig"
diff --git a/drivers/media/platform/sunxi/Makefile b/drivers/media/platform/sunxi/Makefile
index 9aa01cb01883..f92927f49f93 100644
--- a/drivers/media/platform/sunxi/Makefile
+++ b/drivers/media/platform/sunxi/Makefile
@@ -5,4 +5,5 @@ obj-y		+= sun6i-csi/
 obj-y		+= sun6i-mipi-csi2/
 obj-y		+= sun8i-a83t-mipi-csi2/
 obj-y		+= sun8i-di/
+obj-y		+= sun50i-di/
 obj-y		+= sun8i-rotate/
diff --git a/drivers/media/platform/sunxi/sun50i-di/Kconfig b/drivers/media/platform/sunxi/sun50i-di/Kconfig
new file mode 100644
index 000000000000..cc92f5086862
--- /dev/null
+++ b/drivers/media/platform/sunxi/sun50i-di/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_SUN50I_DEINTERLACE
+	tristate "Allwinner Deinterlace v2 driver"
+	depends on V4L_MEM2MEM_DRIVERS
+	depends on VIDEO_DEV
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on COMMON_CLK && OF
+	depends on PM
+	select VIDEOBUF2_DMA_CONTIG
+	select V4L2_MEM2MEM_DEV
+	help
+	  Support for the Allwinner deinterlace v2 unit found on
+	  some SoCs, like H6.
+	  To compile this driver as a module choose m here. The
+	  module will be called sun50i-di.
diff --git a/drivers/media/platform/sunxi/sun50i-di/Makefile b/drivers/media/platform/sunxi/sun50i-di/Makefile
new file mode 100644
index 000000000000..225b3b808069
--- /dev/null
+++ b/drivers/media/platform/sunxi/sun50i-di/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_VIDEO_SUN50I_DEINTERLACE) += sun50i-di.o
diff --git a/drivers/media/platform/sunxi/sun50i-di/sun50i-di.c b/drivers/media/platform/sunxi/sun50i-di/sun50i-di.c
new file mode 100644
index 000000000000..3ee8786cecc0
--- /dev/null
+++ b/drivers/media/platform/sunxi/sun50i-di/sun50i-di.c
@@ -0,0 +1,1142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner sun50i deinterlacer driver
+ *
+ * Copyright (C) 2022 Jernej Skrabec <jernej.skrabec@gmail.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "sun50i-di.h"
+
+#define FLAG_PITCH (DEINTERLACE_MAX_WIDTH / 4)
+#define FLAG_SIZE (FLAG_PITCH * DEINTERLACE_MAX_HEIGHT)
+
+static const u32 deinterlace_formats[] = {
+	V4L2_PIX_FMT_NV12,
+	V4L2_PIX_FMT_NV21,
+	V4L2_PIX_FMT_YUV420,
+	V4L2_PIX_FMT_NV16,
+	V4L2_PIX_FMT_NV61,
+	V4L2_PIX_FMT_YUV422P
+};
+
+static u32 deinterlace_read(struct deinterlace_dev *dev, u32 reg)
+{
+	return readl(dev->base + reg);
+}
+
+static void deinterlace_write(struct deinterlace_dev *dev,
+			      u32 reg, u32 value)
+{
+	writel(value, dev->base + reg);
+}
+
+static void deinterlace_device_run(void *priv)
+{
+	dma_addr_t buf, prev, curr, next, addr[4][3];
+	struct deinterlace_ctx *ctx = priv;
+	struct deinterlace_dev *dev = ctx->dev;
+	struct vb2_v4l2_buffer *src, *dst;
+	u32 reg, pitch[3], offset[2];
+	unsigned int val;
+	bool motion;
+
+	src = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
+	dst = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+
+	v4l2_m2m_buf_copy_metadata(src, dst, true);
+
+	reg = DEINTERLACE_SIZE_WIDTH(ctx->src_fmt.width);
+	reg |= DEINTERLACE_SIZE_HEIGHT(ctx->src_fmt.height);
+	deinterlace_write(dev, DEINTERLACE_SIZE, reg);
+
+	switch (ctx->src_fmt.pixelformat) {
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV21:
+		reg = DEINTERLACE_FORMAT_YUV420SP;
+		break;
+	case V4L2_PIX_FMT_YUV420:
+		reg = DEINTERLACE_FORMAT_YUV420P;
+		break;
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+		reg = DEINTERLACE_FORMAT_YUV422SP;
+		break;
+	case V4L2_PIX_FMT_YUV422P:
+		reg = DEINTERLACE_FORMAT_YUV422P;
+		break;
+	}
+	deinterlace_write(dev, DEINTERLACE_FORMAT, reg);
+
+	pitch[0] = ctx->src_fmt.bytesperline;
+	switch (ctx->src_fmt.pixelformat) {
+	case V4L2_PIX_FMT_YUV420:
+	case V4L2_PIX_FMT_YUV422P:
+		pitch[1] = pitch[0] / 2;
+		pitch[2] = pitch[1];
+		break;
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV21:
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+		pitch[1] = pitch[0];
+		pitch[2] = 0;
+		break;
+	}
+
+	/*
+	 * Deinterlacer assumes that each input has a single field. In
+	 * reality, each input has two interlaced fields. By doubling
+	 * pitches we satisfy deinterlacer's assumption. That way
+	 * every second line will be skipped and it will appear to
+	 * the deinterlacer as a single field.
+	 */
+	deinterlace_write(dev, DEINTERLACE_IN_PITCH0, pitch[0] * 2);
+	deinterlace_write(dev, DEINTERLACE_IN_PITCH1, pitch[1] * 2);
+	deinterlace_write(dev, DEINTERLACE_IN_PITCH2, pitch[2] * 2);
+
+	deinterlace_write(dev, DEINTERLACE_OUT_PITCH0, pitch[0]);
+	deinterlace_write(dev, DEINTERLACE_OUT_PITCH1, pitch[1]);
+	deinterlace_write(dev, DEINTERLACE_OUT_PITCH2, pitch[2]);
+
+	deinterlace_write(dev, DEINTERLACE_FLAG_PITCH, FLAG_PITCH);
+
+	offset[0] = pitch[0] * ctx->src_fmt.height;
+	switch (ctx->src_fmt.pixelformat) {
+	case V4L2_PIX_FMT_YUV420:
+		offset[1] = offset[0] + offset[0] / 4;
+		break;
+	case V4L2_PIX_FMT_YUV422P:
+		offset[1] = offset[0] + offset[0] / 2;
+		break;
+	default:
+		offset[1] = 0;
+		break;
+	}
+
+	/*
+	 * Make sure that all inputs are valid. If history is not
+	 * long enough, reuse last buffer as many times as needed.
+	 */
+	buf = vb2_dma_contig_plane_dma_addr(&src->vb2_buf, 0);
+	next = buf;
+	if (ctx->prev[0])
+		buf = vb2_dma_contig_plane_dma_addr(&ctx->prev[0]->vb2_buf, 0);
+	curr = buf;
+	if (ctx->prev[1])
+		buf = vb2_dma_contig_plane_dma_addr(&ctx->prev[1]->vb2_buf, 0);
+	prev = buf;
+
+	if (ctx->first_field == 0) {
+		if (ctx->field == 0) {
+			addr[0][0] = prev;
+			addr[0][1] = prev;
+			addr[0][2] = prev;
+			addr[1][0] = prev + pitch[0];
+			addr[1][1] = prev + pitch[1];
+			addr[1][2] = prev + pitch[2];
+			addr[2][0] = curr;
+			addr[2][1] = curr;
+			addr[2][2] = curr;
+			addr[3][0] = curr + pitch[0];
+			addr[3][1] = curr + pitch[1];
+			addr[3][2] = curr + pitch[2];
+		} else {
+			addr[0][0] = prev + pitch[0];
+			addr[0][1] = prev + pitch[1];
+			addr[0][2] = prev + pitch[2];
+			addr[1][0] = curr;
+			addr[1][1] = curr;
+			addr[1][2] = curr;
+			addr[2][0] = curr + pitch[0];
+			addr[2][1] = curr + pitch[1];
+			addr[2][2] = curr + pitch[2];
+			addr[3][0] = next;
+			addr[3][1] = next;
+			addr[3][2] = next;
+		}
+	} else {
+		if (ctx->field == 0) {
+			addr[0][0] = prev;
+			addr[0][1] = prev;
+			addr[0][2] = prev;
+			addr[1][0] = curr + pitch[0];
+			addr[1][1] = curr + pitch[1];
+			addr[1][2] = curr + pitch[2];
+			addr[2][0] = curr;
+			addr[2][1] = curr;
+			addr[2][2] = curr;
+			addr[3][0] = next + pitch[0];
+			addr[3][1] = next + pitch[1];
+			addr[3][2] = next + pitch[2];
+		} else {
+			addr[0][0] = prev + pitch[0];
+			addr[0][1] = prev + pitch[1];
+			addr[0][2] = prev + pitch[2];
+			addr[1][0] = prev;
+			addr[1][1] = prev;
+			addr[1][2] = prev;
+			addr[2][0] = curr + pitch[0];
+			addr[2][1] = curr + pitch[1];
+			addr[2][2] = curr + pitch[2];
+			addr[3][0] = curr;
+			addr[3][1] = curr;
+			addr[3][2] = curr;
+		}
+	}
+
+	deinterlace_write(dev, DEINTERLACE_IN0_ADDR0, addr[0][0]);
+	deinterlace_write(dev, DEINTERLACE_IN0_ADDR1, addr[0][1] + offset[0]);
+	deinterlace_write(dev, DEINTERLACE_IN0_ADDR2, addr[0][2] + offset[1]);
+
+	deinterlace_write(dev, DEINTERLACE_IN1_ADDR0, addr[1][0]);
+	deinterlace_write(dev, DEINTERLACE_IN1_ADDR1, addr[1][1] + offset[0]);
+	deinterlace_write(dev, DEINTERLACE_IN1_ADDR2, addr[1][2] + offset[1]);
+
+	deinterlace_write(dev, DEINTERLACE_IN2_ADDR0, addr[2][0]);
+	deinterlace_write(dev, DEINTERLACE_IN2_ADDR1, addr[2][1] + offset[0]);
+	deinterlace_write(dev, DEINTERLACE_IN2_ADDR2, addr[2][2] + offset[1]);
+
+	deinterlace_write(dev, DEINTERLACE_IN3_ADDR0, addr[3][0]);
+	deinterlace_write(dev, DEINTERLACE_IN3_ADDR1, addr[3][1] + offset[0]);
+	deinterlace_write(dev, DEINTERLACE_IN3_ADDR2, addr[3][2] + offset[1]);
+
+	buf = vb2_dma_contig_plane_dma_addr(&dst->vb2_buf, 0);
+	deinterlace_write(dev, DEINTERLACE_OUT_ADDR0, buf);
+	deinterlace_write(dev, DEINTERLACE_OUT_ADDR1, buf + offset[0]);
+	deinterlace_write(dev, DEINTERLACE_OUT_ADDR2, buf + offset[1]);
+
+	if (ctx->field) {
+		deinterlace_write(dev, DEINTERLACE_IN_FLAG_ADDR,
+				  ctx->flag1_buf_dma);
+		deinterlace_write(dev, DEINTERLACE_OUT_FLAG_ADDR,
+				  ctx->flag2_buf_dma);
+	} else {
+		deinterlace_write(dev, DEINTERLACE_IN_FLAG_ADDR,
+				  ctx->flag2_buf_dma);
+		deinterlace_write(dev, DEINTERLACE_OUT_FLAG_ADDR,
+				  ctx->flag1_buf_dma);
+	}
+
+	if (ctx->first_field == 0)
+		val = 4;
+	else
+		val = 5;
+
+	reg = DEINTERLACE_INTP_PARAM0_ANGLE_LIMIT(20);
+	reg |= DEINTERLACE_INTP_PARAM0_ANGLE_CONST_TH(5);
+	reg |= DEINTERLACE_INTP_PARAM0_LUMA_CUR_FAC_MODE(val);
+	reg |= DEINTERLACE_INTP_PARAM0_CHROMA_CUR_FAC_MODE(val);
+	deinterlace_write(dev, DEINTERLACE_INTP_PARAM0, reg);
+
+	reg = DEINTERLACE_POLAR_FIELD(ctx->field);
+	deinterlace_write(dev, DEINTERLACE_POLAR, reg);
+
+	motion = ctx->prev[0] && ctx->prev[1];
+	reg = DEINTERLACE_MODE_DEINT_LUMA;
+	reg |= DEINTERLACE_MODE_DEINT_CHROMA;
+	reg |= DEINTERLACE_MODE_INTP_EN;
+	reg |= DEINTERLACE_MODE_AUTO_UPD_MODE(ctx->first_field);
+	if (motion)
+		reg |= DEINTERLACE_MODE_MOTION_EN;
+	else
+		reg |= DEINTERLACE_MODE_FIELD_MODE;
+	deinterlace_write(dev, DEINTERLACE_MODE, reg);
+
+	/* Start the watchdog timer. */
+	schedule_delayed_work(&dev->watchdog_work, msecs_to_jiffies(1000));
+
+	deinterlace_write(dev, DEINTERLACE_INT_CTRL, DEINTERLACE_INT_EN);
+
+	reg = DEINTERLACE_CTRL_START;
+	if (device_iommu_mapped(dev->dev))
+		reg |= DEINTERLACE_CTRL_IOMMU_EN;
+	deinterlace_write(dev, DEINTERLACE_CTRL, reg);
+}
+
+static void deinterlace_end_job(struct deinterlace_dev *dev,
+				enum vb2_buffer_state state)
+{
+	struct deinterlace_ctx *ctx;
+	struct vb2_v4l2_buffer *dst;
+
+	deinterlace_write(dev, DEINTERLACE_INT_CTRL, 0);
+	deinterlace_write(dev, DEINTERLACE_STATUS, DEINTERLACE_STATUS_FINISHED);
+
+	/* vendor driver always resets the core, so do that here too */
+	deinterlace_write(dev, DEINTERLACE_CTRL, DEINTERLACE_CTRL_RESET);
+	udelay(1);
+	deinterlace_write(dev, DEINTERLACE_CTRL, 0);
+
+	ctx = v4l2_m2m_get_curr_priv(dev->m2m_dev);
+	if (!ctx) {
+		v4l2_err(&dev->v4l2_dev,
+			 "Instance released before the end of transaction\n");
+		return;
+	}
+
+	if (state == VB2_BUF_STATE_ERROR) {
+		memset(ctx->flag1_buf, 0, FLAG_SIZE);
+		memset(ctx->flag2_buf, 0, FLAG_SIZE);
+	}
+
+	dst = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+	v4l2_m2m_buf_done(dst, state);
+
+	if (ctx->field != ctx->first_field || ctx->aborting) {
+		ctx->field = ctx->first_field;
+
+		if (ctx->prev[1])
+			v4l2_m2m_buf_done(ctx->prev[1], VB2_BUF_STATE_DONE);
+		ctx->prev[1] = ctx->prev[0];
+		ctx->prev[0] = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+
+		v4l2_m2m_job_finish(dev->m2m_dev, ctx->fh.m2m_ctx);
+	} else {
+		ctx->field = !ctx->first_field;
+		deinterlace_device_run(ctx);
+	}
+}
+
+static irqreturn_t deinterlace_irq(int irq, void *data)
+{
+	struct deinterlace_dev *dev = data;
+	unsigned int status;
+
+	status = deinterlace_read(dev, DEINTERLACE_STATUS);
+	if (!(status & DEINTERLACE_STATUS_FINISHED))
+		return IRQ_NONE;
+
+	/*
+	 * If cancel_delayed_work returns false it means watchdog already
+	 * executed and finished the job.
+	 */
+	if (!cancel_delayed_work(&dev->watchdog_work))
+		return IRQ_HANDLED;
+
+	deinterlace_end_job(dev, VB2_BUF_STATE_DONE);
+
+	return IRQ_HANDLED;
+}
+
+static void deinterlace_watchdog(struct work_struct *work)
+{
+	struct deinterlace_dev *dev;
+
+	dev = container_of(to_delayed_work(work),
+			   struct deinterlace_dev, watchdog_work);
+
+	deinterlace_end_job(dev, VB2_BUF_STATE_ERROR);
+}
+
+static void deinterlace_init(struct deinterlace_dev *dev)
+{
+	u32 reg;
+
+	deinterlace_write(dev, DEINTERLACE_OUT_PATH, 0);
+
+	reg = DEINTERLACE_MD_PARAM0_MIN_LUMA_TH(4);
+	reg |= DEINTERLACE_MD_PARAM0_MAX_LUMA_TH(12);
+	reg |= DEINTERLACE_MD_PARAM0_AVG_LUMA_SHIFT(6);
+	reg |= DEINTERLACE_MD_PARAM0_TH_SHIFT(1);
+	deinterlace_write(dev, DEINTERLACE_MD_PARAM0, reg);
+
+	reg = DEINTERLACE_MD_PARAM1_MOV_FAC_NONEDGE(2);
+	deinterlace_write(dev, DEINTERLACE_MD_PARAM1, reg);
+
+	reg = DEINTERLACE_MD_PARAM2_CHROMA_SPATIAL_TH(128);
+	reg |= DEINTERLACE_MD_PARAM2_CHROMA_DIFF_TH(5);
+	reg |= DEINTERLACE_MD_PARAM2_PIX_STATIC_TH(3);
+	deinterlace_write(dev, DEINTERLACE_MD_PARAM2, reg);
+
+	reg = DEINTERLACE_MD_CH_PARAM_BLEND_MODE(1);
+	reg |= DEINTERLACE_MD_CH_PARAM_FONT_PRO_EN;
+	reg |= DEINTERLACE_MD_CH_PARAM_FONT_PRO_TH(48);
+	reg |= DEINTERLACE_MD_CH_PARAM_FONT_PRO_FAC(4);
+	deinterlace_write(dev, DEINTERLACE_MD_CH_PARAM, reg);
+
+	reg = DEINTERLACE_INTP_PARAM1_A(4);
+	reg |= DEINTERLACE_INTP_PARAM1_EN;
+	reg |= DEINTERLACE_INTP_PARAM1_C(10);
+	reg |= DEINTERLACE_INTP_PARAM1_CMAX(64);
+	reg |= DEINTERLACE_INTP_PARAM1_MAXRAT(2);
+	deinterlace_write(dev, DEINTERLACE_INTP_PARAM1, reg);
+
+	/* only 32-bit addresses are supported, so high bits are always 0 */
+	deinterlace_write(dev, DEINTERLACE_IN0_ADDRH, 0);
+	deinterlace_write(dev, DEINTERLACE_IN1_ADDRH, 0);
+	deinterlace_write(dev, DEINTERLACE_IN2_ADDRH, 0);
+	deinterlace_write(dev, DEINTERLACE_IN3_ADDRH, 0);
+	deinterlace_write(dev, DEINTERLACE_OUT_ADDRH, 0);
+	deinterlace_write(dev, DEINTERLACE_FLAG_ADDRH, 0);
+}
+
+static int deinterlace_job_ready(void *priv)
+{
+	struct deinterlace_ctx *ctx = priv;
+
+	return v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) >= 1 &&
+	       v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx) >= 2;
+}
+
+static void deinterlace_job_abort(void *priv)
+{
+	struct deinterlace_ctx *ctx = priv;
+
+	/* Will cancel the transaction in the next interrupt handler */
+	ctx->aborting = 1;
+}
+
+static inline struct deinterlace_ctx *deinterlace_file2ctx(struct file *file)
+{
+	return container_of(file->private_data, struct deinterlace_ctx, fh);
+}
+
+static bool deinterlace_check_format(u32 pixelformat)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(deinterlace_formats); i++)
+		if (deinterlace_formats[i] == pixelformat)
+			return true;
+
+	return false;
+}
+
+static void deinterlace_prepare_format(struct v4l2_pix_format *pix_fmt)
+{
+	unsigned int bytesperline = pix_fmt->bytesperline;
+	unsigned int height = pix_fmt->height;
+	unsigned int width = pix_fmt->width;
+	unsigned int sizeimage;
+
+	width = clamp(width, DEINTERLACE_MIN_WIDTH,
+		      DEINTERLACE_MAX_WIDTH);
+	height = clamp(height, DEINTERLACE_MIN_HEIGHT,
+		       DEINTERLACE_MAX_HEIGHT);
+
+	/* try to respect userspace wishes about pitch */
+	bytesperline = ALIGN(bytesperline, 2);
+	if (bytesperline < ALIGN(width, 2))
+		bytesperline = ALIGN(width, 2);
+
+	/* luma */
+	sizeimage = bytesperline * height;
+
+	/* chroma */
+	switch (pix_fmt->pixelformat) {
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV21:
+	case V4L2_PIX_FMT_YUV420:
+		sizeimage += bytesperline * height / 2;
+		break;
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+	case V4L2_PIX_FMT_YUV422P:
+		sizeimage += bytesperline * height;
+		break;
+	}
+
+	if (pix_fmt->sizeimage < sizeimage)
+		pix_fmt->sizeimage = sizeimage;
+
+	pix_fmt->width = width;
+	pix_fmt->height = height;
+	pix_fmt->bytesperline = bytesperline;
+}
+
+static int deinterlace_querycap(struct file *file, void *priv,
+				struct v4l2_capability *cap)
+{
+	strscpy(cap->driver, DEINTERLACE_NAME, sizeof(cap->driver));
+	strscpy(cap->card, DEINTERLACE_NAME, sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info),
+		 "platform:%s", DEINTERLACE_NAME);
+
+	return 0;
+}
+
+static int deinterlace_enum_fmt(struct file *file, void *priv,
+				struct v4l2_fmtdesc *f)
+{
+	if (f->index < ARRAY_SIZE(deinterlace_formats)) {
+		f->pixelformat = deinterlace_formats[f->index];
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int deinterlace_enum_framesizes(struct file *file, void *priv,
+				       struct v4l2_frmsizeenum *fsize)
+{
+	if (fsize->index != 0)
+		return -EINVAL;
+
+	if (!deinterlace_check_format(fsize->pixel_format))
+		return -EINVAL;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_STEPWISE;
+	fsize->stepwise.min_width = DEINTERLACE_MIN_WIDTH;
+	fsize->stepwise.min_height = DEINTERLACE_MIN_HEIGHT;
+	fsize->stepwise.max_width = DEINTERLACE_MAX_WIDTH;
+	fsize->stepwise.max_height = DEINTERLACE_MAX_HEIGHT;
+	fsize->stepwise.step_width = 2;
+
+	switch (fsize->pixel_format) {
+	case V4L2_PIX_FMT_NV12:
+	case V4L2_PIX_FMT_NV21:
+	case V4L2_PIX_FMT_YUV420:
+		fsize->stepwise.step_height = 2;
+		break;
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+	case V4L2_PIX_FMT_YUV422P:
+		fsize->stepwise.step_height = 1;
+		break;
+	}
+
+	return 0;
+}
+
+static int deinterlace_g_fmt_vid_cap(struct file *file, void *priv,
+				     struct v4l2_format *f)
+{
+	struct deinterlace_ctx *ctx = deinterlace_file2ctx(file);
+
+	f->fmt.pix = ctx->dst_fmt;
+
+	return 0;
+}
+
+static int deinterlace_g_fmt_vid_out(struct file *file, void *priv,
+				     struct v4l2_format *f)
+{
+	struct deinterlace_ctx *ctx = deinterlace_file2ctx(file);
+
+	f->fmt.pix = ctx->src_fmt;
+
+	return 0;
+}
+
+static void deinterlace_try_cap_format(struct deinterlace_ctx *ctx,
+				       struct v4l2_pix_format *fmt)
+{
+	fmt->pixelformat = ctx->src_fmt.pixelformat;
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->width = ctx->src_fmt.width;
+	fmt->height = ctx->src_fmt.height;
+
+	deinterlace_prepare_format(fmt);
+}
+
+static void deinterlace_try_out_format(struct v4l2_pix_format *fmt)
+{
+	if (!deinterlace_check_format(fmt->pixelformat))
+		fmt->pixelformat = deinterlace_formats[0];
+
+	if (fmt->field != V4L2_FIELD_INTERLACED_TB &&
+	    fmt->field != V4L2_FIELD_INTERLACED_BT &&
+	    fmt->field != V4L2_FIELD_INTERLACED)
+		fmt->field = V4L2_FIELD_INTERLACED;
+
+	deinterlace_prepare_format(fmt);
+}
+
+static int deinterlace_try_fmt_vid_cap(struct file *file, void *priv,
+				       struct v4l2_format *f)
+{
+	deinterlace_try_cap_format(deinterlace_file2ctx(file), &f->fmt.pix);
+
+	return 0;
+}
+
+static int deinterlace_try_fmt_vid_out(struct file *file, void *priv,
+				       struct v4l2_format *f)
+{
+	deinterlace_try_out_format(&f->fmt.pix);
+
+	return 0;
+}
+
+static void deinterlace_set_cap_format(struct deinterlace_ctx *ctx,
+				       struct v4l2_pix_format *fmt)
+{
+	deinterlace_try_cap_format(ctx, fmt);
+
+	ctx->dst_fmt = *fmt;
+}
+
+static void deinterlace_set_out_format(struct deinterlace_ctx *ctx,
+				       struct v4l2_pix_format *fmt)
+{
+	deinterlace_try_out_format(fmt);
+
+	ctx->src_fmt = *fmt;
+
+	/* Propagate colorspace information to capture. */
+	ctx->dst_fmt.colorspace = fmt->colorspace;
+	ctx->dst_fmt.xfer_func = fmt->xfer_func;
+	ctx->dst_fmt.ycbcr_enc = fmt->ycbcr_enc;
+	ctx->dst_fmt.quantization = fmt->quantization;
+
+	deinterlace_set_cap_format(ctx, &ctx->dst_fmt);
+}
+
+static int deinterlace_s_fmt_vid_cap(struct file *file, void *priv,
+				     struct v4l2_format *f)
+{
+	struct deinterlace_ctx *ctx = deinterlace_file2ctx(file);
+	struct vb2_queue *vq;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (vb2_is_busy(vq))
+		return -EBUSY;
+
+	deinterlace_set_cap_format(ctx, &f->fmt.pix);
+
+	return 0;
+}
+
+static int deinterlace_s_fmt_vid_out(struct file *file, void *priv,
+				     struct v4l2_format *f)
+{
+	struct deinterlace_ctx *ctx = deinterlace_file2ctx(file);
+	struct vb2_queue *vq;
+
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, f->type);
+	if (vb2_is_busy(vq))
+		return -EBUSY;
+
+	/*
+	 * Pixel format and size must be propagated to capture format too,
+	 * so capture queue must not be busy.
+	 */
+	vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	if (vb2_is_busy(vq))
+		return -EBUSY;
+
+	deinterlace_set_out_format(ctx, &f->fmt.pix);
+
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops deinterlace_ioctl_ops = {
+	.vidioc_querycap		= deinterlace_querycap,
+
+	.vidioc_enum_framesizes		= deinterlace_enum_framesizes,
+
+	.vidioc_enum_fmt_vid_cap	= deinterlace_enum_fmt,
+	.vidioc_g_fmt_vid_cap		= deinterlace_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap		= deinterlace_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap		= deinterlace_s_fmt_vid_cap,
+
+	.vidioc_enum_fmt_vid_out	= deinterlace_enum_fmt,
+	.vidioc_g_fmt_vid_out		= deinterlace_g_fmt_vid_out,
+	.vidioc_try_fmt_vid_out		= deinterlace_try_fmt_vid_out,
+	.vidioc_s_fmt_vid_out		= deinterlace_s_fmt_vid_out,
+
+	.vidioc_reqbufs			= v4l2_m2m_ioctl_reqbufs,
+	.vidioc_querybuf		= v4l2_m2m_ioctl_querybuf,
+	.vidioc_qbuf			= v4l2_m2m_ioctl_qbuf,
+	.vidioc_dqbuf			= v4l2_m2m_ioctl_dqbuf,
+	.vidioc_prepare_buf		= v4l2_m2m_ioctl_prepare_buf,
+	.vidioc_create_bufs		= v4l2_m2m_ioctl_create_bufs,
+	.vidioc_expbuf			= v4l2_m2m_ioctl_expbuf,
+
+	.vidioc_streamon		= v4l2_m2m_ioctl_streamon,
+	.vidioc_streamoff		= v4l2_m2m_ioctl_streamoff,
+};
+
+static int deinterlace_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+				   unsigned int *nplanes, unsigned int sizes[],
+				   struct device *alloc_devs[])
+{
+	struct deinterlace_ctx *ctx = vb2_get_drv_priv(vq);
+	struct v4l2_pix_format *pix_fmt;
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type))
+		pix_fmt = &ctx->src_fmt;
+	else
+		pix_fmt = &ctx->dst_fmt;
+
+	if (*nplanes) {
+		if (sizes[0] < pix_fmt->sizeimage)
+			return -EINVAL;
+	} else {
+		sizes[0] = pix_fmt->sizeimage;
+		*nplanes = 1;
+	}
+
+	return 0;
+}
+
+static int deinterlace_buf_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_queue *vq = vb->vb2_queue;
+	struct deinterlace_ctx *ctx = vb2_get_drv_priv(vq);
+	struct v4l2_pix_format *pix_fmt;
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type))
+		pix_fmt = &ctx->src_fmt;
+	else
+		pix_fmt = &ctx->dst_fmt;
+
+	if (vb2_plane_size(vb, 0) < pix_fmt->sizeimage)
+		return -EINVAL;
+
+	vb2_set_plane_payload(vb, 0, pix_fmt->sizeimage);
+
+	return 0;
+}
+
+static void deinterlace_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct deinterlace_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+
+	v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vbuf);
+}
+
+static void deinterlace_queue_cleanup(struct vb2_queue *vq, u32 state)
+{
+	struct deinterlace_ctx *ctx = vb2_get_drv_priv(vq);
+	struct vb2_v4l2_buffer *vbuf;
+
+	do {
+		if (V4L2_TYPE_IS_OUTPUT(vq->type))
+			vbuf = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
+		else
+			vbuf = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
+
+		if (vbuf)
+			v4l2_m2m_buf_done(vbuf, state);
+	} while (vbuf);
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
+		if (ctx->prev[0])
+			v4l2_m2m_buf_done(ctx->prev[0], state);
+		if (ctx->prev[1])
+			v4l2_m2m_buf_done(ctx->prev[1], state);
+	}
+}
+
+static int deinterlace_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct deinterlace_ctx *ctx = vb2_get_drv_priv(vq);
+	struct device *dev = ctx->dev->dev;
+	int ret;
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0) {
+			dev_err(dev, "Failed to enable module\n");
+
+			goto err_runtime_get;
+		}
+
+		ctx->first_field =
+			ctx->src_fmt.field == V4L2_FIELD_INTERLACED_BT;
+		ctx->field = ctx->first_field;
+
+		ctx->prev[0] = NULL;
+		ctx->prev[1] = NULL;
+		ctx->aborting = 0;
+
+		ctx->flag1_buf = dma_alloc_coherent(dev, FLAG_SIZE,
+						    &ctx->flag1_buf_dma,
+						    GFP_KERNEL);
+		if (!ctx->flag1_buf) {
+			ret = -ENOMEM;
+
+			goto err_no_mem1;
+		}
+
+		ctx->flag2_buf = dma_alloc_coherent(dev, FLAG_SIZE,
+						    &ctx->flag2_buf_dma,
+						    GFP_KERNEL);
+		if (!ctx->flag2_buf) {
+			ret = -ENOMEM;
+
+			goto err_no_mem2;
+		}
+	}
+
+	return 0;
+
+err_no_mem2:
+	dma_free_coherent(dev, FLAG_SIZE, ctx->flag1_buf,
+			  ctx->flag1_buf_dma);
+err_no_mem1:
+	pm_runtime_put(dev);
+err_runtime_get:
+	deinterlace_queue_cleanup(vq, VB2_BUF_STATE_QUEUED);
+
+	return ret;
+}
+
+static void deinterlace_stop_streaming(struct vb2_queue *vq)
+{
+	struct deinterlace_ctx *ctx = vb2_get_drv_priv(vq);
+
+	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
+		struct device *dev = ctx->dev->dev;
+
+		dma_free_coherent(dev, FLAG_SIZE, ctx->flag1_buf,
+				  ctx->flag1_buf_dma);
+		dma_free_coherent(dev, FLAG_SIZE, ctx->flag2_buf,
+				  ctx->flag2_buf_dma);
+
+		pm_runtime_put(dev);
+	}
+
+	deinterlace_queue_cleanup(vq, VB2_BUF_STATE_ERROR);
+}
+
+static const struct vb2_ops deinterlace_qops = {
+	.queue_setup		= deinterlace_queue_setup,
+	.buf_prepare		= deinterlace_buf_prepare,
+	.buf_queue		= deinterlace_buf_queue,
+	.start_streaming	= deinterlace_start_streaming,
+	.stop_streaming		= deinterlace_stop_streaming,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+static int deinterlace_queue_init(void *priv, struct vb2_queue *src_vq,
+				  struct vb2_queue *dst_vq)
+{
+	struct deinterlace_ctx *ctx = priv;
+	int ret;
+
+	src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
+	src_vq->drv_priv = ctx;
+	src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+	src_vq->min_buffers_needed = 1;
+	src_vq->ops = &deinterlace_qops;
+	src_vq->mem_ops = &vb2_dma_contig_memops;
+	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	src_vq->lock = &ctx->dev->dev_mutex;
+	src_vq->dev = ctx->dev->dev;
+
+	ret = vb2_queue_init(src_vq);
+	if (ret)
+		return ret;
+
+	dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
+	dst_vq->drv_priv = ctx;
+	dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+	dst_vq->min_buffers_needed = 2;
+	dst_vq->ops = &deinterlace_qops;
+	dst_vq->mem_ops = &vb2_dma_contig_memops;
+	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
+	dst_vq->lock = &ctx->dev->dev_mutex;
+	dst_vq->dev = ctx->dev->dev;
+
+	ret = vb2_queue_init(dst_vq);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int deinterlace_open(struct file *file)
+{
+	struct deinterlace_dev *dev = video_drvdata(file);
+	struct deinterlace_ctx *ctx = NULL;
+	int ret;
+
+	if (mutex_lock_interruptible(&dev->dev_mutex))
+		return -ERESTARTSYS;
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx) {
+		mutex_unlock(&dev->dev_mutex);
+		return -ENOMEM;
+	}
+
+	/* set default output and capture format */
+	deinterlace_set_out_format(ctx, &ctx->src_fmt);
+
+	v4l2_fh_init(&ctx->fh, video_devdata(file));
+	file->private_data = &ctx->fh;
+	ctx->dev = dev;
+
+	ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx,
+					    &deinterlace_queue_init);
+	if (IS_ERR(ctx->fh.m2m_ctx)) {
+		ret = PTR_ERR(ctx->fh.m2m_ctx);
+		goto err_free;
+	}
+
+	v4l2_fh_add(&ctx->fh);
+
+	mutex_unlock(&dev->dev_mutex);
+
+	return 0;
+
+err_free:
+	kfree(ctx);
+	mutex_unlock(&dev->dev_mutex);
+
+	return ret;
+}
+
+static int deinterlace_release(struct file *file)
+{
+	struct deinterlace_dev *dev = video_drvdata(file);
+	struct deinterlace_ctx *ctx = container_of(file->private_data,
+						   struct deinterlace_ctx, fh);
+
+	mutex_lock(&dev->dev_mutex);
+
+	v4l2_fh_del(&ctx->fh);
+	v4l2_fh_exit(&ctx->fh);
+	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
+
+	kfree(ctx);
+
+	mutex_unlock(&dev->dev_mutex);
+
+	return 0;
+}
+
+static const struct v4l2_file_operations deinterlace_fops = {
+	.owner		= THIS_MODULE,
+	.open		= deinterlace_open,
+	.release	= deinterlace_release,
+	.poll		= v4l2_m2m_fop_poll,
+	.unlocked_ioctl	= video_ioctl2,
+	.mmap		= v4l2_m2m_fop_mmap,
+};
+
+static const struct video_device deinterlace_video_device = {
+	.name		= DEINTERLACE_NAME,
+	.vfl_dir	= VFL_DIR_M2M,
+	.fops		= &deinterlace_fops,
+	.ioctl_ops	= &deinterlace_ioctl_ops,
+	.minor		= -1,
+	.release	= video_device_release_empty,
+	.device_caps	= V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING,
+};
+
+static const struct v4l2_m2m_ops deinterlace_m2m_ops = {
+	.device_run	= deinterlace_device_run,
+	.job_ready	= deinterlace_job_ready,
+	.job_abort	= deinterlace_job_abort,
+};
+
+static int deinterlace_probe(struct platform_device *pdev)
+{
+	struct deinterlace_dev *dev;
+	struct video_device *vfd;
+	int irq, ret;
+
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->vfd = deinterlace_video_device;
+	dev->dev = &pdev->dev;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return irq;
+
+	ret = devm_request_irq(dev->dev, irq, deinterlace_irq,
+			       0, dev_name(dev->dev), dev);
+	if (ret) {
+		dev_err(dev->dev, "Failed to request IRQ\n");
+
+		return ret;
+	}
+
+	dev->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(dev->base))
+		return PTR_ERR(dev->base);
+
+	dev->bus_clk = devm_clk_get(dev->dev, "bus");
+	if (IS_ERR(dev->bus_clk))
+		return dev_err_probe(dev->dev, PTR_ERR(dev->bus_clk),
+				     "Failed to get bus clock\n");
+
+	dev->mod_clk = devm_clk_get(dev->dev, "mod");
+	if (IS_ERR(dev->mod_clk))
+		return dev_err_probe(dev->dev, PTR_ERR(dev->mod_clk),
+				     "Failed to get mod clock\n");
+
+	dev->ram_clk = devm_clk_get(dev->dev, "ram");
+	if (IS_ERR(dev->ram_clk))
+		return dev_err_probe(dev->dev, PTR_ERR(dev->ram_clk),
+				     "Failed to get ram clock\n");
+
+	dev->rstc = devm_reset_control_get(dev->dev, NULL);
+	if (IS_ERR(dev->rstc))
+		return dev_err_probe(dev->dev, PTR_ERR(dev->rstc),
+				     "Failed to get reset control\n");
+
+	dma_set_mask_and_coherent(dev->dev, DMA_BIT_MASK(32));
+	dma_set_max_seg_size(dev->dev, UINT_MAX);
+
+	mutex_init(&dev->dev_mutex);
+
+	INIT_DELAYED_WORK(&dev->watchdog_work, deinterlace_watchdog);
+
+	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
+	if (ret) {
+		dev_err(dev->dev, "Failed to register V4L2 device\n");
+
+		return ret;
+	}
+
+	vfd = &dev->vfd;
+	vfd->lock = &dev->dev_mutex;
+	vfd->v4l2_dev = &dev->v4l2_dev;
+
+	snprintf(vfd->name, sizeof(vfd->name), "%s",
+		 deinterlace_video_device.name);
+	video_set_drvdata(vfd, dev);
+
+	ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
+	if (ret) {
+		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+
+		goto err_v4l2;
+	}
+
+	v4l2_info(&dev->v4l2_dev,
+		  "Device registered as /dev/video%d\n", vfd->num);
+
+	dev->m2m_dev = v4l2_m2m_init(&deinterlace_m2m_ops);
+	if (IS_ERR(dev->m2m_dev)) {
+		v4l2_err(&dev->v4l2_dev,
+			 "Failed to initialize V4L2 M2M device\n");
+		ret = PTR_ERR(dev->m2m_dev);
+
+		goto err_video;
+	}
+
+	platform_set_drvdata(pdev, dev);
+
+	pm_runtime_enable(dev->dev);
+
+	return 0;
+
+err_video:
+	video_unregister_device(&dev->vfd);
+err_v4l2:
+	v4l2_device_unregister(&dev->v4l2_dev);
+
+	return ret;
+}
+
+static int deinterlace_remove(struct platform_device *pdev)
+{
+	struct deinterlace_dev *dev = platform_get_drvdata(pdev);
+
+	v4l2_m2m_release(dev->m2m_dev);
+	video_unregister_device(&dev->vfd);
+	v4l2_device_unregister(&dev->v4l2_dev);
+
+	pm_runtime_force_suspend(&pdev->dev);
+
+	return 0;
+}
+
+static int deinterlace_runtime_resume(struct device *device)
+{
+	struct deinterlace_dev *dev = dev_get_drvdata(device);
+	int ret;
+
+	ret = clk_prepare_enable(dev->bus_clk);
+	if (ret) {
+		dev_err(dev->dev, "Failed to enable bus clock\n");
+
+		return ret;
+	}
+
+	ret = clk_prepare_enable(dev->mod_clk);
+	if (ret) {
+		dev_err(dev->dev, "Failed to enable mod clock\n");
+
+		goto err_bus_clk;
+	}
+
+	ret = clk_prepare_enable(dev->ram_clk);
+	if (ret) {
+		dev_err(dev->dev, "Failed to enable ram clock\n");
+
+		goto err_mod_clk;
+	}
+
+	ret = reset_control_deassert(dev->rstc);
+	if (ret) {
+		dev_err(dev->dev, "Failed to apply reset\n");
+
+		goto err_ram_clk;
+	}
+
+	deinterlace_init(dev);
+
+	return 0;
+
+err_ram_clk:
+	clk_disable_unprepare(dev->ram_clk);
+err_mod_clk:
+	clk_disable_unprepare(dev->mod_clk);
+err_bus_clk:
+	clk_disable_unprepare(dev->bus_clk);
+
+	return ret;
+}
+
+static int deinterlace_runtime_suspend(struct device *device)
+{
+	struct deinterlace_dev *dev = dev_get_drvdata(device);
+
+	reset_control_assert(dev->rstc);
+
+	clk_disable_unprepare(dev->ram_clk);
+	clk_disable_unprepare(dev->mod_clk);
+	clk_disable_unprepare(dev->bus_clk);
+
+	return 0;
+}
+
+static const struct of_device_id deinterlace_dt_match[] = {
+	{ .compatible = "allwinner,sun50i-h6-deinterlace" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, deinterlace_dt_match);
+
+static const struct dev_pm_ops deinterlace_pm_ops = {
+	.runtime_resume		= deinterlace_runtime_resume,
+	.runtime_suspend	= deinterlace_runtime_suspend,
+};
+
+static struct platform_driver deinterlace_driver = {
+	.probe		= deinterlace_probe,
+	.remove		= deinterlace_remove,
+	.driver		= {
+		.name		= DEINTERLACE_NAME,
+		.of_match_table	= deinterlace_dt_match,
+		.pm		= &deinterlace_pm_ops,
+	},
+};
+module_platform_driver(deinterlace_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@gmail.com>");
+MODULE_DESCRIPTION("Allwinner sun50i deinterlace driver");
diff --git a/drivers/media/platform/sunxi/sun50i-di/sun50i-di.h b/drivers/media/platform/sunxi/sun50i-di/sun50i-di.h
new file mode 100644
index 000000000000..c6eae30040e9
--- /dev/null
+++ b/drivers/media/platform/sunxi/sun50i-di/sun50i-di.h
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Allwinner Deinterlace driver
+ *
+ * Copyright (C) 2020 Jernej Skrabec <jernej.skrabec@gmail.com>
+ */
+
+#ifndef _SUN8I_DEINTERLACE_H_
+#define _SUN8I_DEINTERLACE_H_
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/workqueue.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/videobuf2-v4l2.h>
+
+#define DEINTERLACE_NAME		"sun50i-di"
+
+#define DEINTERLACE_CTRL			0x00
+#define DEINTERLACE_CTRL_START				BIT(0)
+#define DEINTERLACE_CTRL_IOMMU_EN			BIT(16)
+#define DEINTERLACE_CTRL_RESET				BIT(31)
+
+#define DEINTERLACE_INT_CTRL			0x04
+#define DEINTERLACE_INT_EN				BIT(0)
+
+#define DEINTERLACE_STATUS			0x08
+#define DEINTERLACE_STATUS_FINISHED			BIT(0)
+#define DEINTERLACE_STATUS_BUSY				BIT(8)
+
+#define DEINTERLACE_SIZE			0x10
+#define DEINTERLACE_SIZE_WIDTH(w) \
+	(((w) - 1) & 0x7ff)
+#define DEINTERLACE_SIZE_HEIGHT(h) \
+	((((h) - 1) & 0x7ff) << 16)
+
+#define DEINTERLACE_FORMAT			0x14
+#define DEINTERLACE_FORMAT_YUV420P			0
+#define DEINTERLACE_FORMAT_YUV420SP			1
+#define DEINTERLACE_FORMAT_YUV422P			2
+#define DEINTERLACE_FORMAT_YUV422SP			3
+
+#define DEINTERLACE_POLAR			0x18
+#define DEINTERLACE_POLAR_FIELD(x)			((x) & 1)
+
+/* all pitch registers accept 16-bit values */
+#define DEINTERLACE_IN_PITCH0			0x20
+#define DEINTERLACE_IN_PITCH1			0x24
+#define DEINTERLACE_IN_PITCH2			0x28
+#define DEINTERLACE_OUT_PITCH0			0x30
+#define DEINTERLACE_OUT_PITCH1			0x34
+#define DEINTERLACE_OUT_PITCH2			0x38
+#define DEINTERLACE_FLAG_PITCH			0x40
+#define DEINTERLACE_IN0_ADDR0			0x50
+#define DEINTERLACE_IN0_ADDR1			0x54
+#define DEINTERLACE_IN0_ADDR2			0x58
+#define DEINTERLACE_IN0_ADDRH			0x5c
+#define DEINTERLACE_IN1_ADDR0			0x60
+#define DEINTERLACE_IN1_ADDR1			0x64
+#define DEINTERLACE_IN1_ADDR2			0x68
+#define DEINTERLACE_IN1_ADDRH			0x6c
+#define DEINTERLACE_IN2_ADDR0			0x70
+#define DEINTERLACE_IN2_ADDR1			0x74
+#define DEINTERLACE_IN2_ADDR2			0x78
+#define DEINTERLACE_IN2_ADDRH			0x7c
+#define DEINTERLACE_IN3_ADDR0			0x80
+#define DEINTERLACE_IN3_ADDR1			0x84
+#define DEINTERLACE_IN3_ADDR2			0x88
+#define DEINTERLACE_IN3_ADDRH			0x8c
+#define DEINTERLACE_OUT_ADDR0			0x90
+#define DEINTERLACE_OUT_ADDR1			0x94
+#define DEINTERLACE_OUT_ADDR2			0x98
+#define DEINTERLACE_OUT_ADDRH			0x9c
+#define DEINTERLACE_IN_FLAG_ADDR		0xa0
+#define DEINTERLACE_OUT_FLAG_ADDR		0xa4
+#define DEINTERLACE_FLAG_ADDRH			0xa8
+
+#define DEINTERLACE_ADDRH0(x)				((x) & 0xff)
+#define DEINTERLACE_ADDRH1(x)				(((x) & 0xff) << 8)
+#define DEINTERLACE_ADDRH2(x)				(((x) & 0xff) << 16)
+
+#define DEINTERLACE_MODE			0xb0
+#define DEINTERLACE_MODE_DEINT_LUMA			BIT(0)
+#define DEINTERLACE_MODE_MOTION_EN			BIT(4)
+#define DEINTERLACE_MODE_INTP_EN			BIT(5)
+#define DEINTERLACE_MODE_AUTO_UPD_MODE(x)		(((x) & 3) << 12)
+#define DEINTERLACE_MODE_DEINT_CHROMA			BIT(16)
+#define DEINTERLACE_MODE_FIELD_MODE			BIT(31)
+
+#define DEINTERLACE_MD_PARAM0			0xb4
+#define DEINTERLACE_MD_PARAM0_MIN_LUMA_TH(x)		((x) & 0xff)
+#define DEINTERLACE_MD_PARAM0_MAX_LUMA_TH(x)		(((x) & 0xff) << 8)
+#define DEINTERLACE_MD_PARAM0_AVG_LUMA_SHIFT(x)		(((x) & 0xf) << 16)
+#define DEINTERLACE_MD_PARAM0_TH_SHIFT(x)		(((x) & 0xf) << 24)
+
+#define DEINTERLACE_MD_PARAM1			0xb8
+#define DEINTERLACE_MD_PARAM1_MOV_FAC_NONEDGE(x)	(((x) & 0x3) << 28)
+
+#define DEINTERLACE_MD_PARAM2			0xbc
+#define DEINTERLACE_MD_PARAM2_CHROMA_SPATIAL_TH(x)	(((x) & 0xff) << 8)
+#define DEINTERLACE_MD_PARAM2_CHROMA_DIFF_TH(x)		(((x) & 0xff) << 16)
+#define DEINTERLACE_MD_PARAM2_PIX_STATIC_TH(x)		(((x) & 0x3) << 28)
+
+#define DEINTERLACE_INTP_PARAM0			0xc0
+#define DEINTERLACE_INTP_PARAM0_ANGLE_LIMIT(x)		((x) & 0x1f)
+#define DEINTERLACE_INTP_PARAM0_ANGLE_CONST_TH(x)	(((x) & 7) << 8)
+#define DEINTERLACE_INTP_PARAM0_LUMA_CUR_FAC_MODE(x)	(((x) & 7) << 16)
+#define DEINTERLACE_INTP_PARAM0_CHROMA_CUR_FAC_MODE(x)	(((x) & 7) << 20)
+
+#define DEINTERLACE_MD_CH_PARAM			0xc4
+#define DEINTERLACE_MD_CH_PARAM_BLEND_MODE(x)		((x) & 0xf)
+#define DEINTERLACE_MD_CH_PARAM_FONT_PRO_EN		BIT(8)
+#define DEINTERLACE_MD_CH_PARAM_FONT_PRO_TH(x)		(((x) & 0xff) << 16)
+#define DEINTERLACE_MD_CH_PARAM_FONT_PRO_FAC(x)		(((x) & 0x1f) << 24)
+
+#define DEINTERLACE_INTP_PARAM1			0xc8
+#define DEINTERLACE_INTP_PARAM1_A(x)			((x) & 7)
+#define DEINTERLACE_INTP_PARAM1_EN			BIT(3)
+#define DEINTERLACE_INTP_PARAM1_C(x)			(((x) & 0xf) << 4)
+#define DEINTERLACE_INTP_PARAM1_CMAX(x)			(((x) & 0xff) << 8)
+#define DEINTERLACE_INTP_PARAM1_MAXRAT(x)		(((x) & 3) << 16)
+
+/* there is no explanation what this register does */
+#define DEINTERLACE_OUT_PATH			0x200
+
+#define DEINTERLACE_MIN_WIDTH	2U
+#define DEINTERLACE_MIN_HEIGHT	2U
+#define DEINTERLACE_MAX_WIDTH	2048U
+#define DEINTERLACE_MAX_HEIGHT	1100U
+
+struct deinterlace_dev {
+	struct v4l2_device	v4l2_dev;
+	struct video_device	vfd;
+	struct device		*dev;
+	struct v4l2_m2m_dev	*m2m_dev;
+
+	/* Device file mutex */
+	struct mutex		dev_mutex;
+
+	void __iomem		*base;
+
+	struct clk		*bus_clk;
+	struct clk		*mod_clk;
+	struct clk		*ram_clk;
+
+	struct reset_control	*rstc;
+
+	struct delayed_work	watchdog_work;
+};
+
+struct deinterlace_ctx {
+	struct v4l2_fh		fh;
+	struct deinterlace_dev	*dev;
+
+	struct v4l2_pix_format	src_fmt;
+	struct v4l2_pix_format	dst_fmt;
+
+	void			*flag1_buf;
+	dma_addr_t		flag1_buf_dma;
+
+	void			*flag2_buf;
+	dma_addr_t		flag2_buf_dma;
+
+	struct vb2_v4l2_buffer	*prev[2];
+
+	unsigned int		first_field;
+	unsigned int		field;
+
+	int			aborting;
+};
+
+#endif
-- 
2.38.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH 3/3] arm64: dts: allwinner: h6: Add deinterlace node
  2022-11-01 12:31 [PATCH 0/3] media: sunxi: Add H6 deinterlace driver Jernej Skrabec
  2022-11-01 12:31 ` [PATCH 1/3] media: dt-bindings: media: Add Allwinner H6 Deinterlace binding Jernej Skrabec
  2022-11-01 12:32 ` [PATCH 2/3] media: sunxi: Add H6 deinterlace driver Jernej Skrabec
@ 2022-11-01 12:32 ` Jernej Skrabec
  2022-11-05  3:01   ` Samuel Holland
  2022-11-04 11:33 ` [PATCH 0/3] media: sunxi: Add H6 deinterlace driver Hans Verkuil
  3 siblings, 1 reply; 11+ messages in thread
From: Jernej Skrabec @ 2022-11-01 12:32 UTC (permalink / raw)
  To: mchehab, hverkuil-cisco
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, samuel, linux-media,
	devicetree, linux-arm-kernel, linux-sunxi, linux-kernel,
	Jernej Skrabec

H6 has deinterlace core. Add a node for it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 0aa6dfafc197..badc6afd6941 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -154,6 +154,18 @@ mixer0_out_tcon_top_mixer0: endpoint {
 			};
 		};
 
+		deinterlace@1420000 {
+			compatible = "allwinner,sun50i-h6-deinterlace";
+			reg = <0x01420000 0x2000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_MBUS_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&iommu 2>;
+		};
+
 		video-codec-g2@1c00000 {
 			compatible = "allwinner,sun50i-h6-vpu-g2";
 			reg = <0x01c00000 0x1000>;
-- 
2.38.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/3] media: dt-bindings: media: Add Allwinner H6 Deinterlace binding
  2022-11-01 12:31 ` [PATCH 1/3] media: dt-bindings: media: Add Allwinner H6 Deinterlace binding Jernej Skrabec
@ 2022-11-02 17:14   ` Rob Herring
  2022-11-05  3:02   ` Samuel Holland
  1 sibling, 0 replies; 11+ messages in thread
From: Rob Herring @ 2022-11-02 17:14 UTC (permalink / raw)
  To: Jernej Skrabec
  Cc: samuel, robh+dt, linux-kernel, krzysztof.kozlowski+dt,
	devicetree, linux-arm-kernel, linux-sunxi, hverkuil-cisco, wens,
	mchehab, linux-media


On Tue, 01 Nov 2022 13:31:59 +0100, Jernej Skrabec wrote:
> Allwinner H6 Deinterlace core is used for deinterlacing interlaced video
> content.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> ---
>  .../allwinner,sun50i-h6-deinterlace.yaml      | 74 +++++++++++++++++++
>  1 file changed, 74 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 0/3] media: sunxi: Add H6 deinterlace driver
  2022-11-01 12:31 [PATCH 0/3] media: sunxi: Add H6 deinterlace driver Jernej Skrabec
                   ` (2 preceding siblings ...)
  2022-11-01 12:32 ` [PATCH 3/3] arm64: dts: allwinner: h6: Add deinterlace node Jernej Skrabec
@ 2022-11-04 11:33 ` Hans Verkuil
  2022-11-04 17:36   ` Jernej Škrabec
  3 siblings, 1 reply; 11+ messages in thread
From: Hans Verkuil @ 2022-11-04 11:33 UTC (permalink / raw)
  To: Jernej Skrabec, mchehab
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, samuel, linux-media,
	devicetree, linux-arm-kernel, linux-sunxi, linux-kernel

Hi Jernej,

Can you add a patch updating the MAINTAINERS file? Just post a 4/3 patch :-)

Regards,

	Hans

On 01/11/2022 13:31, Jernej Skrabec wrote:
> This series implements driver for H6 deinterlace core, which is
> newer version of core, covered by sun8i-di (v2.3). Contrary to
> older one, it doesn't support scaling, but it supports iommu,
> has additional motion compensated deinterlacing algorithm and
> supports different pixel formats.
> 
> v4l2-compliance 1.23.0-4961, 64 bits, 64-bit time_t
> v4l2-compliance SHA: f86484524f32 2022-10-21 10:08:58
> 
> Compliance test for sun50i-di device /dev/video0:
> 
> Driver Info:
>         Driver name      : sun50i-di
>         Card type        : sun50i-di
>         Bus info         : platform:sun50i-di
>         Driver version   : 6.1.0
>         Capabilities     : 0x84208000
>                 Video Memory-to-Memory
>                 Streaming
>                 Extended Pix Format
>                 Device Capabilities
>         Device Caps      : 0x04208000
>                 Video Memory-to-Memory
>                 Streaming
>                 Extended Pix Format
> 
> Required ioctls:
>         test VIDIOC_QUERYCAP: OK
>         test invalid ioctls: OK
> 
> Allow for multiple opens:
>         test second /dev/video0 open: OK
>         test VIDIOC_QUERYCAP: OK
>         test VIDIOC_G/S_PRIORITY: OK
>         test for unlimited opens: OK
> 
> Debug ioctls:
>         test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>         test VIDIOC_LOG_STATUS: OK (Not Supported)
> 
> Input ioctls:
>         test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>         test VIDIOC_ENUMAUDIO: OK (Not Supported)
>         test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>         test VIDIOC_G/S_AUDIO: OK (Not Supported)
>         Inputs: 0 Audio Inputs: 0 Tuners: 0
> 
> Output ioctls:
>         test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>         test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>         test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>         Outputs: 0 Audio Outputs: 0 Modulators: 0
> 
> Input/Output configuration ioctls:
>         test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>         test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>         test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>         test VIDIOC_G/S_EDID: OK (Not Supported)
> 
> Control ioctls:
>         test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
>         test VIDIOC_QUERYCTRL: OK (Not Supported)
>         test VIDIOC_G/S_CTRL: OK (Not Supported)
>         test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
>         test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
>         test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>         Standard Controls: 0 Private Controls: 0
> 
> Format ioctls:
>         test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>         test VIDIOC_G/S_PARM: OK (Not Supported)
>         test VIDIOC_G_FBUF: OK (Not Supported)
>         test VIDIOC_G_FMT: OK
>         test VIDIOC_TRY_FMT: OK
>         test VIDIOC_S_FMT: OK
>         test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>         test Cropping: OK (Not Supported)
>         test Composing: OK (Not Supported)
>         test Scaling: OK (Not Supported)
> 
> Codec ioctls:
>         test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>         test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>         test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> 
> Buffer ioctls:
>         test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>         test VIDIOC_EXPBUF: OK
>         test Requests: OK (Not Supported)
> 
> Total for sun50i-di device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 0
> 
> Best regards,
> Jernej
> 
> Jernej Skrabec (3):
>   media: dt-bindings: media: Add Allwinner H6 Deinterlace binding
>   media: sunxi: Add H6 deinterlace driver
>   arm64: dts: allwinner: h6: Add deinterlace node
> 
>  .../allwinner,sun50i-h6-deinterlace.yaml      |   74 ++
>  MAINTAINERS                                   |    4 +-
>  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |   12 +
>  drivers/media/platform/sunxi/Kconfig          |    1 +
>  drivers/media/platform/sunxi/Makefile         |    1 +
>  .../media/platform/sunxi/sun50i-di/Kconfig    |   15 +
>  .../media/platform/sunxi/sun50i-di/Makefile   |    2 +
>  .../platform/sunxi/sun50i-di/sun50i-di.c      | 1142 +++++++++++++++++
>  .../platform/sunxi/sun50i-di/sun50i-di.h      |  175 +++
>  9 files changed, 1425 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.yaml
>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/Kconfig
>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/Makefile
>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.c
>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.h
> 
> --
> 2.38.1
> 


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 0/3] media: sunxi: Add H6 deinterlace driver
  2022-11-04 11:33 ` [PATCH 0/3] media: sunxi: Add H6 deinterlace driver Hans Verkuil
@ 2022-11-04 17:36   ` Jernej Škrabec
  2022-11-04 22:47     ` Hans Verkuil
  0 siblings, 1 reply; 11+ messages in thread
From: Jernej Škrabec @ 2022-11-04 17:36 UTC (permalink / raw)
  To: mchehab, Hans Verkuil
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, samuel, linux-media,
	devicetree, linux-arm-kernel, linux-sunxi, linux-kernel

Hi Hans,

Dne petek, 04. november 2022 ob 12:33:50 CET je Hans Verkuil napisal(a):
> Hi Jernej,
> 
> Can you add a patch updating the MAINTAINERS file? Just post a 4/3 patch :-)

It's already part of patch 2. I didn't see the reason to split it to separate 
patch.

Best regards,
Jernej

> 
> Regards,
> 
> 	Hans
> 
> On 01/11/2022 13:31, Jernej Skrabec wrote:
> > This series implements driver for H6 deinterlace core, which is
> > newer version of core, covered by sun8i-di (v2.3). Contrary to
> > older one, it doesn't support scaling, but it supports iommu,
> > has additional motion compensated deinterlacing algorithm and
> > supports different pixel formats.
> > 
> > v4l2-compliance 1.23.0-4961, 64 bits, 64-bit time_t
> > v4l2-compliance SHA: f86484524f32 2022-10-21 10:08:58
> > 
> > Compliance test for sun50i-di device /dev/video0:
> > 
> > Driver Info:
> >         Driver name      : sun50i-di
> >         Card type        : sun50i-di
> >         Bus info         : platform:sun50i-di
> >         Driver version   : 6.1.0
> >         Capabilities     : 0x84208000
> >         
> >                 Video Memory-to-Memory
> >                 Streaming
> >                 Extended Pix Format
> >                 Device Capabilities
> >         
> >         Device Caps      : 0x04208000
> >         
> >                 Video Memory-to-Memory
> >                 Streaming
> >                 Extended Pix Format
> > 
> > Required ioctls:
> >         test VIDIOC_QUERYCAP: OK
> >         test invalid ioctls: OK
> > 
> > Allow for multiple opens:
> >         test second /dev/video0 open: OK
> >         test VIDIOC_QUERYCAP: OK
> >         test VIDIOC_G/S_PRIORITY: OK
> >         test for unlimited opens: OK
> > 
> > Debug ioctls:
> >         test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >         test VIDIOC_LOG_STATUS: OK (Not Supported)
> > 
> > Input ioctls:
> >         test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >         test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >         test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >         test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >         test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >         Inputs: 0 Audio Inputs: 0 Tuners: 0
> > 
> > Output ioctls:
> >         test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >         test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >         test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >         test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >         Outputs: 0 Audio Outputs: 0 Modulators: 0
> > 
> > Input/Output configuration ioctls:
> >         test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >         test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >         test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >         test VIDIOC_G/S_EDID: OK (Not Supported)
> > 
> > Control ioctls:
> >         test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> >         test VIDIOC_QUERYCTRL: OK (Not Supported)
> >         test VIDIOC_G/S_CTRL: OK (Not Supported)
> >         test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> >         test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> >         test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >         Standard Controls: 0 Private Controls: 0
> > 
> > Format ioctls:
> >         test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >         test VIDIOC_G/S_PARM: OK (Not Supported)
> >         test VIDIOC_G_FBUF: OK (Not Supported)
> >         test VIDIOC_G_FMT: OK
> >         test VIDIOC_TRY_FMT: OK
> >         test VIDIOC_S_FMT: OK
> >         test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> >         test Cropping: OK (Not Supported)
> >         test Composing: OK (Not Supported)
> >         test Scaling: OK (Not Supported)
> > 
> > Codec ioctls:
> >         test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >         test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >         test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > 
> > Buffer ioctls:
> >         test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> >         test VIDIOC_EXPBUF: OK
> >         test Requests: OK (Not Supported)
> > 
> > Total for sun50i-di device /dev/video0: 45, Succeeded: 45, Failed: 0,
> > Warnings: 0
> > 
> > Best regards,
> > Jernej
> > 
> > Jernej Skrabec (3):
> >   media: dt-bindings: media: Add Allwinner H6 Deinterlace binding
> >   media: sunxi: Add H6 deinterlace driver
> >   arm64: dts: allwinner: h6: Add deinterlace node
> >  
> >  .../allwinner,sun50i-h6-deinterlace.yaml      |   74 ++
> >  MAINTAINERS                                   |    4 +-
> >  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |   12 +
> >  drivers/media/platform/sunxi/Kconfig          |    1 +
> >  drivers/media/platform/sunxi/Makefile         |    1 +
> >  .../media/platform/sunxi/sun50i-di/Kconfig    |   15 +
> >  .../media/platform/sunxi/sun50i-di/Makefile   |    2 +
> >  .../platform/sunxi/sun50i-di/sun50i-di.c      | 1142 +++++++++++++++++
> >  .../platform/sunxi/sun50i-di/sun50i-di.h      |  175 +++
> >  9 files changed, 1425 insertions(+), 1 deletion(-)
> >  create mode 100644
> >  Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.
> >  yaml create mode 100644 drivers/media/platform/sunxi/sun50i-di/Kconfig
> >  create mode 100644 drivers/media/platform/sunxi/sun50i-di/Makefile
> >  create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.c
> >  create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.h
> > 
> > --
> > 2.38.1





^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 0/3] media: sunxi: Add H6 deinterlace driver
  2022-11-04 17:36   ` Jernej Škrabec
@ 2022-11-04 22:47     ` Hans Verkuil
  0 siblings, 0 replies; 11+ messages in thread
From: Hans Verkuil @ 2022-11-04 22:47 UTC (permalink / raw)
  To: Jernej Škrabec, mchehab
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, samuel, linux-media,
	devicetree, linux-arm-kernel, linux-sunxi, linux-kernel

On 04/11/2022 18:36, Jernej Škrabec wrote:
> Hi Hans,
> 
> Dne petek, 04. november 2022 ob 12:33:50 CET je Hans Verkuil napisal(a):
>> Hi Jernej,
>>
>> Can you add a patch updating the MAINTAINERS file? Just post a 4/3 patch :-)
> 
> It's already part of patch 2. I didn't see the reason to split it to separate 
> patch.

I totally missed that. Apologies for the noise!

Regards,

	Hans

> 
> Best regards,
> Jernej
> 
>>
>> Regards,
>>
>> 	Hans
>>
>> On 01/11/2022 13:31, Jernej Skrabec wrote:
>>> This series implements driver for H6 deinterlace core, which is
>>> newer version of core, covered by sun8i-di (v2.3). Contrary to
>>> older one, it doesn't support scaling, but it supports iommu,
>>> has additional motion compensated deinterlacing algorithm and
>>> supports different pixel formats.
>>>
>>> v4l2-compliance 1.23.0-4961, 64 bits, 64-bit time_t
>>> v4l2-compliance SHA: f86484524f32 2022-10-21 10:08:58
>>>
>>> Compliance test for sun50i-di device /dev/video0:
>>>
>>> Driver Info:
>>>         Driver name      : sun50i-di
>>>         Card type        : sun50i-di
>>>         Bus info         : platform:sun50i-di
>>>         Driver version   : 6.1.0
>>>         Capabilities     : 0x84208000
>>>         
>>>                 Video Memory-to-Memory
>>>                 Streaming
>>>                 Extended Pix Format
>>>                 Device Capabilities
>>>         
>>>         Device Caps      : 0x04208000
>>>         
>>>                 Video Memory-to-Memory
>>>                 Streaming
>>>                 Extended Pix Format
>>>
>>> Required ioctls:
>>>         test VIDIOC_QUERYCAP: OK
>>>         test invalid ioctls: OK
>>>
>>> Allow for multiple opens:
>>>         test second /dev/video0 open: OK
>>>         test VIDIOC_QUERYCAP: OK
>>>         test VIDIOC_G/S_PRIORITY: OK
>>>         test for unlimited opens: OK
>>>
>>> Debug ioctls:
>>>         test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>>         test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>
>>> Input ioctls:
>>>         test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>         test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>>         test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>>         test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>>>         test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>>         Inputs: 0 Audio Inputs: 0 Tuners: 0
>>>
>>> Output ioctls:
>>>         test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>         test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>>         test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>>         test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>>         Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>
>>> Input/Output configuration ioctls:
>>>         test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>>>         test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>>         test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>>         test VIDIOC_G/S_EDID: OK (Not Supported)
>>>
>>> Control ioctls:
>>>         test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
>>>         test VIDIOC_QUERYCTRL: OK (Not Supported)
>>>         test VIDIOC_G/S_CTRL: OK (Not Supported)
>>>         test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
>>>         test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
>>>         test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>>         Standard Controls: 0 Private Controls: 0
>>>
>>> Format ioctls:
>>>         test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>>         test VIDIOC_G/S_PARM: OK (Not Supported)
>>>         test VIDIOC_G_FBUF: OK (Not Supported)
>>>         test VIDIOC_G_FMT: OK
>>>         test VIDIOC_TRY_FMT: OK
>>>         test VIDIOC_S_FMT: OK
>>>         test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>         test Cropping: OK (Not Supported)
>>>         test Composing: OK (Not Supported)
>>>         test Scaling: OK (Not Supported)
>>>
>>> Codec ioctls:
>>>         test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>>         test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>>         test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>
>>> Buffer ioctls:
>>>         test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>>         test VIDIOC_EXPBUF: OK
>>>         test Requests: OK (Not Supported)
>>>
>>> Total for sun50i-di device /dev/video0: 45, Succeeded: 45, Failed: 0,
>>> Warnings: 0
>>>
>>> Best regards,
>>> Jernej
>>>
>>> Jernej Skrabec (3):
>>>   media: dt-bindings: media: Add Allwinner H6 Deinterlace binding
>>>   media: sunxi: Add H6 deinterlace driver
>>>   arm64: dts: allwinner: h6: Add deinterlace node
>>>  
>>>  .../allwinner,sun50i-h6-deinterlace.yaml      |   74 ++
>>>  MAINTAINERS                                   |    4 +-
>>>  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  |   12 +
>>>  drivers/media/platform/sunxi/Kconfig          |    1 +
>>>  drivers/media/platform/sunxi/Makefile         |    1 +
>>>  .../media/platform/sunxi/sun50i-di/Kconfig    |   15 +
>>>  .../media/platform/sunxi/sun50i-di/Makefile   |    2 +
>>>  .../platform/sunxi/sun50i-di/sun50i-di.c      | 1142 +++++++++++++++++
>>>  .../platform/sunxi/sun50i-di/sun50i-di.h      |  175 +++
>>>  9 files changed, 1425 insertions(+), 1 deletion(-)
>>>  create mode 100644
>>>  Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.
>>>  yaml create mode 100644 drivers/media/platform/sunxi/sun50i-di/Kconfig
>>>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/Makefile
>>>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.c
>>>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.h
>>>
>>> --
>>> 2.38.1
> 
> 
> 
> 


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 3/3] arm64: dts: allwinner: h6: Add deinterlace node
  2022-11-01 12:32 ` [PATCH 3/3] arm64: dts: allwinner: h6: Add deinterlace node Jernej Skrabec
@ 2022-11-05  3:01   ` Samuel Holland
  0 siblings, 0 replies; 11+ messages in thread
From: Samuel Holland @ 2022-11-05  3:01 UTC (permalink / raw)
  To: Jernej Skrabec, mchehab, hverkuil-cisco
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, linux-media, devicetree,
	linux-arm-kernel, linux-sunxi, linux-kernel

On 11/1/22 07:32, Jernej Skrabec wrote:
> H6 has deinterlace core. Add a node for it.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Reviewed-by: Samuel Holland <samuel@sholland.org>

> ---
>  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index 0aa6dfafc197..badc6afd6941 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -154,6 +154,18 @@ mixer0_out_tcon_top_mixer0: endpoint {
>  			};
>  		};
>  
> +		deinterlace@1420000 {
> +			compatible = "allwinner,sun50i-h6-deinterlace";
> +			reg = <0x01420000 0x2000>;

Not that it matters, as long as the range is big enough, but how did you
come up with this size? The only thing I find in the vendor devicetrees
is 0x20c, the offset of the last documented register.

Regards,
Samuel

> +			clocks = <&ccu CLK_BUS_DEINTERLACE>,
> +				 <&ccu CLK_DEINTERLACE>,
> +				 <&ccu CLK_MBUS_DEINTERLACE>;
> +			clock-names = "bus", "mod", "ram";
> +			resets = <&ccu RST_BUS_DEINTERLACE>;
> +			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> +			iommus = <&iommu 2>;
> +		};
> +
>  		video-codec-g2@1c00000 {
>  			compatible = "allwinner,sun50i-h6-vpu-g2";
>  			reg = <0x01c00000 0x1000>;


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 1/3] media: dt-bindings: media: Add Allwinner H6 Deinterlace binding
  2022-11-01 12:31 ` [PATCH 1/3] media: dt-bindings: media: Add Allwinner H6 Deinterlace binding Jernej Skrabec
  2022-11-02 17:14   ` Rob Herring
@ 2022-11-05  3:02   ` Samuel Holland
  1 sibling, 0 replies; 11+ messages in thread
From: Samuel Holland @ 2022-11-05  3:02 UTC (permalink / raw)
  To: Jernej Skrabec, mchehab, hverkuil-cisco
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, linux-media, devicetree,
	linux-arm-kernel, linux-sunxi, linux-kernel

On 11/1/22 07:31, Jernej Skrabec wrote:
> Allwinner H6 Deinterlace core is used for deinterlacing interlaced video
> content.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> ---
>  .../allwinner,sun50i-h6-deinterlace.yaml      | 74 +++++++++++++++++++
>  1 file changed, 74 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun50i-h6-deinterlace.yaml

Reviewed-by: Samuel Holland <samuel@sholland.org>


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 2/3] media: sunxi: Add H6 deinterlace driver
  2022-11-01 12:32 ` [PATCH 2/3] media: sunxi: Add H6 deinterlace driver Jernej Skrabec
@ 2022-11-05  3:28   ` Samuel Holland
  0 siblings, 0 replies; 11+ messages in thread
From: Samuel Holland @ 2022-11-05  3:28 UTC (permalink / raw)
  To: Jernej Skrabec, mchehab, hverkuil-cisco
  Cc: robh+dt, krzysztof.kozlowski+dt, wens, linux-media, devicetree,
	linux-arm-kernel, linux-sunxi, linux-kernel

Hi Jernej,

On 11/1/22 07:32, Jernej Skrabec wrote:
> This driver covers H6 deinterlace core, which is marked in vendor driver
> as v2.3. Contrary to older cores, covered by sun8i-di, it doesn't
> support scaling, but it supports iommu and has additional motion
> compensated deinterlacing algorithm.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> ---
>  MAINTAINERS                                   |    4 +-
>  drivers/media/platform/sunxi/Kconfig          |    1 +
>  drivers/media/platform/sunxi/Makefile         |    1 +
>  .../media/platform/sunxi/sun50i-di/Kconfig    |   15 +
>  .../media/platform/sunxi/sun50i-di/Makefile   |    2 +
>  .../platform/sunxi/sun50i-di/sun50i-di.c      | 1142 +++++++++++++++++
>  .../platform/sunxi/sun50i-di/sun50i-di.h      |  175 +++
>  7 files changed, 1339 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/Kconfig
>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/Makefile
>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.c
>  create mode 100644 drivers/media/platform/sunxi/sun50i-di/sun50i-di.h
> 
> [...]
>
> +static int deinterlace_start_streaming(struct vb2_queue *vq, unsigned int count)
> +{
> +	struct deinterlace_ctx *ctx = vb2_get_drv_priv(vq);
> +	struct device *dev = ctx->dev->dev;
> +	int ret;
> +
> +	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
> +		ret = pm_runtime_get_sync(dev);

This should use pm_runtime_resume_and_get().

> +		if (ret < 0) {
> +			dev_err(dev, "Failed to enable module\n");
> +
> +			goto err_runtime_get;
> +		}
> +
> +		ctx->first_field =
> +			ctx->src_fmt.field == V4L2_FIELD_INTERLACED_BT;
> +		ctx->field = ctx->first_field;
> +
> +		ctx->prev[0] = NULL;
> +		ctx->prev[1] = NULL;
> +		ctx->aborting = 0;
> +
> +		ctx->flag1_buf = dma_alloc_coherent(dev, FLAG_SIZE,
> +						    &ctx->flag1_buf_dma,
> +						    GFP_KERNEL);
> +		if (!ctx->flag1_buf) {
> +			ret = -ENOMEM;
> +
> +			goto err_no_mem1;
> +		}
> +
> +		ctx->flag2_buf = dma_alloc_coherent(dev, FLAG_SIZE,
> +						    &ctx->flag2_buf_dma,
> +						    GFP_KERNEL);
> +		if (!ctx->flag2_buf) {
> +			ret = -ENOMEM;
> +
> +			goto err_no_mem2;
> +		}
> +	}
> +
> +	return 0;
> +
> +err_no_mem2:
> +	dma_free_coherent(dev, FLAG_SIZE, ctx->flag1_buf,
> +			  ctx->flag1_buf_dma);
> +err_no_mem1:
> +	pm_runtime_put(dev);
> +err_runtime_get:
> +	deinterlace_queue_cleanup(vq, VB2_BUF_STATE_QUEUED);
> +
> +	return ret;
> +}
> +
> +static void deinterlace_stop_streaming(struct vb2_queue *vq)
> +{
> +	struct deinterlace_ctx *ctx = vb2_get_drv_priv(vq);
> +
> +	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
> +		struct device *dev = ctx->dev->dev;
> +
> +		dma_free_coherent(dev, FLAG_SIZE, ctx->flag1_buf,
> +				  ctx->flag1_buf_dma);
> +		dma_free_coherent(dev, FLAG_SIZE, ctx->flag2_buf,
> +				  ctx->flag2_buf_dma);
> +
> +		pm_runtime_put(dev);
> +	}
> +
> +	deinterlace_queue_cleanup(vq, VB2_BUF_STATE_ERROR);
> +}
> +
> +static const struct vb2_ops deinterlace_qops = {
> +	.queue_setup		= deinterlace_queue_setup,
> +	.buf_prepare		= deinterlace_buf_prepare,
> +	.buf_queue		= deinterlace_buf_queue,
> +	.start_streaming	= deinterlace_start_streaming,
> +	.stop_streaming		= deinterlace_stop_streaming,
> +	.wait_prepare		= vb2_ops_wait_prepare,
> +	.wait_finish		= vb2_ops_wait_finish,
> +};
> +
> +static int deinterlace_queue_init(void *priv, struct vb2_queue *src_vq,
> +				  struct vb2_queue *dst_vq)
> +{
> +	struct deinterlace_ctx *ctx = priv;
> +	int ret;
> +
> +	src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
> +	src_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> +	src_vq->drv_priv = ctx;
> +	src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> +	src_vq->min_buffers_needed = 1;
> +	src_vq->ops = &deinterlace_qops;
> +	src_vq->mem_ops = &vb2_dma_contig_memops;
> +	src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> +	src_vq->lock = &ctx->dev->dev_mutex;
> +	src_vq->dev = ctx->dev->dev;
> +
> +	ret = vb2_queue_init(src_vq);
> +	if (ret)
> +		return ret;
> +
> +	dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> +	dst_vq->io_modes = VB2_MMAP | VB2_DMABUF;
> +	dst_vq->drv_priv = ctx;
> +	dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> +	dst_vq->min_buffers_needed = 2;
> +	dst_vq->ops = &deinterlace_qops;
> +	dst_vq->mem_ops = &vb2_dma_contig_memops;
> +	dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> +	dst_vq->lock = &ctx->dev->dev_mutex;
> +	dst_vq->dev = ctx->dev->dev;
> +
> +	ret = vb2_queue_init(dst_vq);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int deinterlace_open(struct file *file)
> +{
> +	struct deinterlace_dev *dev = video_drvdata(file);
> +	struct deinterlace_ctx *ctx = NULL;
> +	int ret;
> +
> +	if (mutex_lock_interruptible(&dev->dev_mutex))
> +		return -ERESTARTSYS;
> +
> +	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);

This memory allocation does not need to be inside the lock.

> +	if (!ctx) {
> +		mutex_unlock(&dev->dev_mutex);
> +		return -ENOMEM;
> +	}
> +
> +	/* set default output and capture format */
> +	deinterlace_set_out_format(ctx, &ctx->src_fmt);
> +
> +	v4l2_fh_init(&ctx->fh, video_devdata(file));
> +	file->private_data = &ctx->fh;
> +	ctx->dev = dev;
> +
> +	ctx->fh.m2m_ctx = v4l2_m2m_ctx_init(dev->m2m_dev, ctx,
> +					    &deinterlace_queue_init);
> +	if (IS_ERR(ctx->fh.m2m_ctx)) {
> +		ret = PTR_ERR(ctx->fh.m2m_ctx);
> +		goto err_free;
> +	}
> +
> +	v4l2_fh_add(&ctx->fh);
> +
> +	mutex_unlock(&dev->dev_mutex);
> +
> +	return 0;
> +
> +err_free:
> +	kfree(ctx);
> +	mutex_unlock(&dev->dev_mutex);
> +
> +	return ret;
> +}
> +
> +static int deinterlace_release(struct file *file)
> +{
> +	struct deinterlace_dev *dev = video_drvdata(file);
> +	struct deinterlace_ctx *ctx = container_of(file->private_data,
> +						   struct deinterlace_ctx, fh);
> +
> +	mutex_lock(&dev->dev_mutex);
> +
> +	v4l2_fh_del(&ctx->fh);
> +	v4l2_fh_exit(&ctx->fh);
> +	v4l2_m2m_ctx_release(ctx->fh.m2m_ctx);
> +
> +	kfree(ctx);

This does not need to be inside the lock either.

> +
> +	mutex_unlock(&dev->dev_mutex);
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_file_operations deinterlace_fops = {
> +	.owner		= THIS_MODULE,
> +	.open		= deinterlace_open,
> +	.release	= deinterlace_release,
> +	.poll		= v4l2_m2m_fop_poll,
> +	.unlocked_ioctl	= video_ioctl2,
> +	.mmap		= v4l2_m2m_fop_mmap,
> +};
> +
> +static const struct video_device deinterlace_video_device = {
> +	.name		= DEINTERLACE_NAME,
> +	.vfl_dir	= VFL_DIR_M2M,
> +	.fops		= &deinterlace_fops,
> +	.ioctl_ops	= &deinterlace_ioctl_ops,
> +	.minor		= -1,
> +	.release	= video_device_release_empty,
> +	.device_caps	= V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING,
> +};
> +
> +static const struct v4l2_m2m_ops deinterlace_m2m_ops = {
> +	.device_run	= deinterlace_device_run,
> +	.job_ready	= deinterlace_job_ready,
> +	.job_abort	= deinterlace_job_abort,
> +};
> +
> +static int deinterlace_probe(struct platform_device *pdev)
> +{
> +	struct deinterlace_dev *dev;
> +	struct video_device *vfd;
> +	int irq, ret;
> +
> +	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> +	if (!dev)
> +		return -ENOMEM;
> +
> +	dev->vfd = deinterlace_video_device;
> +	dev->dev = &pdev->dev;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq <= 0)
> +		return irq;
> +
> +	ret = devm_request_irq(dev->dev, irq, deinterlace_irq,
> +			       0, dev_name(dev->dev), dev);

You should expect to receive an interrupt as soon as you call this
function, but dev->base is not initialized yet.

> +	if (ret) {
> +		dev_err(dev->dev, "Failed to request IRQ\n");
> +
> +		return ret;
> +	}
> +
> +	dev->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(dev->base))
> +		return PTR_ERR(dev->base);
> +
> +	dev->bus_clk = devm_clk_get(dev->dev, "bus");
> +	if (IS_ERR(dev->bus_clk))
> +		return dev_err_probe(dev->dev, PTR_ERR(dev->bus_clk),
> +				     "Failed to get bus clock\n");
> +
> +	dev->mod_clk = devm_clk_get(dev->dev, "mod");
> +	if (IS_ERR(dev->mod_clk))
> +		return dev_err_probe(dev->dev, PTR_ERR(dev->mod_clk),
> +				     "Failed to get mod clock\n");
> +
> +	dev->ram_clk = devm_clk_get(dev->dev, "ram");
> +	if (IS_ERR(dev->ram_clk))
> +		return dev_err_probe(dev->dev, PTR_ERR(dev->ram_clk),
> +				     "Failed to get ram clock\n");
> +
> +	dev->rstc = devm_reset_control_get(dev->dev, NULL);
> +	if (IS_ERR(dev->rstc))
> +		return dev_err_probe(dev->dev, PTR_ERR(dev->rstc),
> +				     "Failed to get reset control\n");
> +
> +	dma_set_mask_and_coherent(dev->dev, DMA_BIT_MASK(32));
> +	dma_set_max_seg_size(dev->dev, UINT_MAX);
> +
> +	mutex_init(&dev->dev_mutex);
> +
> +	INIT_DELAYED_WORK(&dev->watchdog_work, deinterlace_watchdog);
> +
> +	ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
> +	if (ret) {
> +		dev_err(dev->dev, "Failed to register V4L2 device\n");
> +
> +		return ret;
> +	}
> +
> +	vfd = &dev->vfd;
> +	vfd->lock = &dev->dev_mutex;
> +	vfd->v4l2_dev = &dev->v4l2_dev;
> +
> +	snprintf(vfd->name, sizeof(vfd->name), "%s",
> +		 deinterlace_video_device.name);
> +	video_set_drvdata(vfd, dev);
> +
> +	ret = video_register_device(vfd, VFL_TYPE_VIDEO, 0);
> +	if (ret) {
> +		v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
> +
> +		goto err_v4l2;
> +	}
> +
> +	v4l2_info(&dev->v4l2_dev,
> +		  "Device registered as /dev/video%d\n", vfd->num);
> +
> +	dev->m2m_dev = v4l2_m2m_init(&deinterlace_m2m_ops);
> +	if (IS_ERR(dev->m2m_dev)) {
> +		v4l2_err(&dev->v4l2_dev,
> +			 "Failed to initialize V4L2 M2M device\n");
> +		ret = PTR_ERR(dev->m2m_dev);
> +
> +		goto err_video;
> +	}
> +
> +	platform_set_drvdata(pdev, dev);
> +
> +	pm_runtime_enable(dev->dev);
> +
> +	return 0;
> +
> +err_video:
> +	video_unregister_device(&dev->vfd);
> +err_v4l2:
> +	v4l2_device_unregister(&dev->v4l2_dev);
> +
> +	return ret;
> +}
> +
> +static int deinterlace_remove(struct platform_device *pdev)
> +{
> +	struct deinterlace_dev *dev = platform_get_drvdata(pdev);
> +
> +	v4l2_m2m_release(dev->m2m_dev);
> +	video_unregister_device(&dev->vfd);
> +	v4l2_device_unregister(&dev->v4l2_dev);
> +
> +	pm_runtime_force_suspend(&pdev->dev);
> +
> +	return 0;
> +}
> +
> +static int deinterlace_runtime_resume(struct device *device)
> +{
> +	struct deinterlace_dev *dev = dev_get_drvdata(device);
> +	int ret;
> +
> +	ret = clk_prepare_enable(dev->bus_clk);
> +	if (ret) {
> +		dev_err(dev->dev, "Failed to enable bus clock\n");
> +
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(dev->mod_clk);
> +	if (ret) {
> +		dev_err(dev->dev, "Failed to enable mod clock\n");
> +
> +		goto err_bus_clk;
> +	}
> +
> +	ret = clk_prepare_enable(dev->ram_clk);
> +	if (ret) {
> +		dev_err(dev->dev, "Failed to enable ram clock\n");
> +
> +		goto err_mod_clk;
> +	}
> +
> +	ret = reset_control_deassert(dev->rstc);
> +	if (ret) {
> +		dev_err(dev->dev, "Failed to apply reset\n");
> +
> +		goto err_ram_clk;
> +	}

The manuals generally recommend deasserting the reset before enabling
the clock.

Also, the BSP sets the module clock rate to 300 MHz (PLL_PERIPH0 / 2).
Do you think we should do the same? I am guessing the default is 600 MHz
(PLL_PERIPH0 / 1), which is fine as long as the module works at that
frequency, although it may not be optimal for power usage.

> +
> +	deinterlace_init(dev);
> +
> +	return 0;
> +
> +err_ram_clk:
> +	clk_disable_unprepare(dev->ram_clk);
> +err_mod_clk:
> +	clk_disable_unprepare(dev->mod_clk);
> +err_bus_clk:
> +	clk_disable_unprepare(dev->bus_clk);
> +
> +	return ret;
> +}
> +
> +static int deinterlace_runtime_suspend(struct device *device)
> +{
> +	struct deinterlace_dev *dev = dev_get_drvdata(device);
> +
> +	reset_control_assert(dev->rstc);
> +
> +	clk_disable_unprepare(dev->ram_clk);
> +	clk_disable_unprepare(dev->mod_clk);
> +	clk_disable_unprepare(dev->bus_clk);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id deinterlace_dt_match[] = {
> +	{ .compatible = "allwinner,sun50i-h6-deinterlace" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, deinterlace_dt_match);
> +
> +static const struct dev_pm_ops deinterlace_pm_ops = {
> +	.runtime_resume		= deinterlace_runtime_resume,
> +	.runtime_suspend	= deinterlace_runtime_suspend,
> +};
> +
> +static struct platform_driver deinterlace_driver = {
> +	.probe		= deinterlace_probe,
> +	.remove		= deinterlace_remove,
> +	.driver		= {
> +		.name		= DEINTERLACE_NAME,
> +		.of_match_table	= deinterlace_dt_match,
> +		.pm		= &deinterlace_pm_ops,
> +	},
> +};
> +module_platform_driver(deinterlace_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@gmail.com>");
> +MODULE_DESCRIPTION("Allwinner sun50i deinterlace driver");
> diff --git a/drivers/media/platform/sunxi/sun50i-di/sun50i-di.h b/drivers/media/platform/sunxi/sun50i-di/sun50i-di.h
> new file mode 100644
> index 000000000000..c6eae30040e9
> --- /dev/null
> +++ b/drivers/media/platform/sunxi/sun50i-di/sun50i-di.h
> @@ -0,0 +1,175 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Allwinner Deinterlace driver
> + *
> + * Copyright (C) 2020 Jernej Skrabec <jernej.skrabec@gmail.com>
> + */
> +
> +#ifndef _SUN8I_DEINTERLACE_H_
> +#define _SUN8I_DEINTERLACE_H_

The header guard doesn't match the file.

Regards,
Samuel


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2022-11-05  3:28 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-01 12:31 [PATCH 0/3] media: sunxi: Add H6 deinterlace driver Jernej Skrabec
2022-11-01 12:31 ` [PATCH 1/3] media: dt-bindings: media: Add Allwinner H6 Deinterlace binding Jernej Skrabec
2022-11-02 17:14   ` Rob Herring
2022-11-05  3:02   ` Samuel Holland
2022-11-01 12:32 ` [PATCH 2/3] media: sunxi: Add H6 deinterlace driver Jernej Skrabec
2022-11-05  3:28   ` Samuel Holland
2022-11-01 12:32 ` [PATCH 3/3] arm64: dts: allwinner: h6: Add deinterlace node Jernej Skrabec
2022-11-05  3:01   ` Samuel Holland
2022-11-04 11:33 ` [PATCH 0/3] media: sunxi: Add H6 deinterlace driver Hans Verkuil
2022-11-04 17:36   ` Jernej Škrabec
2022-11-04 22:47     ` Hans Verkuil

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).