[PATCH 0/2] Allwinner power domain support

[PATCH 0/2] Allwinner power domain support

[Samuel Holland]

This series adds support for the power controller found in D1 and other
recent Allwinner SoCs. There is no first-party documentation, but there
are a couple of vendor drivers for different hardware revisions[1][2],
and the register definitions were easy to verify empirically.

I have tested this driver on D1 with the video engine. There is no DT
update patch here to avoid dependencies between series. The example in
the binding is what will go in the D1 DT.

[1]: https://github.com/mangopi-sbc/tina-linux-5.4/blob/main/drivers/soc/sunxi/gpu_domain.c
[1]: https://github.com/mangopi-sbc/tina-linux-5.4/blob/main/drivers/soc/sunxi/pm_domains.c


Samuel Holland (2):
  dt-bindings: power: Add Allwinner D1 PPU
  soc: sunxi: Add Allwinner D1 PPU driver

 .../power/allwinner,sun20i-d1-ppu.yaml        |  54 +++++
 drivers/soc/sunxi/Kconfig                     |   9 +
 drivers/soc/sunxi/Makefile                    |   1 +
 drivers/soc/sunxi/sun20i-ppu.c                | 207 ++++++++++++++++++
 .../power/allwinner,sun20i-d1-ppu.h           |  10 +
 5 files changed, 281 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
 create mode 100644 drivers/soc/sunxi/sun20i-ppu.c
 create mode 100644 include/dt-bindings/power/allwinner,sun20i-d1-ppu.h

-- 
2.37.4

[PATCH 1/2] dt-bindings: power: Add Allwinner D1 PPU

[Samuel Holland]

The Allwinner D1 family of SoCs contain a "PPU" power domain controller
separate from the PRCM. It can power down the video engine and DSP, and
it contains special logic for hardware-assisted CPU idle. Other recent
Allwinner SoCs (e.g. TV303) have a PPU with a different set of domains.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 .../power/allwinner,sun20i-d1-ppu.yaml        | 54 +++++++++++++++++++
 .../power/allwinner,sun20i-d1-ppu.h           | 10 ++++
 2 files changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
 create mode 100644 include/dt-bindings/power/allwinner,sun20i-d1-ppu.h

diff --git a/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
new file mode 100644
index 000000000000..64c9a9f398a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/allwinner,sun20i-d1-ppu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner SoCs "PPU" power domain controller
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  D1 and related SoCs contain a power domain controller for the CPUs, GPU, and
+  video-related hardware.
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun20i-d1-ppu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Bus Clock
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#power-domain-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun20i-d1-r-ccu.h>
+    #include <dt-bindings/reset/sun20i-d1-r-ccu.h>
+
+    ppu: power-controller@7001000 {
+            compatible = "allwinner,sun20i-d1-ppu";
+            reg = <0x7001000 0x1000>;
+            clocks = <&r_ccu CLK_BUS_R_PPU>;
+            resets = <&r_ccu RST_BUS_R_PPU>;
+            #power-domain-cells = <1>;
+    };
diff --git a/include/dt-bindings/power/allwinner,sun20i-d1-ppu.h b/include/dt-bindings/power/allwinner,sun20i-d1-ppu.h
new file mode 100644
index 000000000000..23cfb57256d6
--- /dev/null
+++ b/include/dt-bindings/power/allwinner,sun20i-d1-ppu.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_POWER_SUN20I_D1_PPU_H_
+#define _DT_BINDINGS_POWER_SUN20I_D1_PPU_H_
+
+#define PD_CPU			0
+#define PD_VE			1
+#define PD_DSP			2
+
+#endif /* _DT_BINDINGS_POWER_SUN20I_D1_PPU_H_ */
-- 
2.37.4

[PATCH 2/2] soc: sunxi: Add Allwinner D1 PPU driver

[Samuel Holland]

The PPU contains a series of identical MMIO register ranges, one for
each power domain. Each range contains control/status bits for a clock
gate, reset line, output gates, and a power switch. (The clock and reset
are separate from, and in addition to, the bits in the CCU.) It also
contains a hardware power sequence engine to control the other bits.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 drivers/soc/sunxi/Kconfig      |   9 ++
 drivers/soc/sunxi/Makefile     |   1 +
 drivers/soc/sunxi/sun20i-ppu.c | 207 +++++++++++++++++++++++++++++++++
 3 files changed, 217 insertions(+)
 create mode 100644 drivers/soc/sunxi/sun20i-ppu.c

diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
index 8aecbc9b1976..5e84cf4b8510 100644
--- a/drivers/soc/sunxi/Kconfig
+++ b/drivers/soc/sunxi/Kconfig
@@ -19,3 +19,12 @@ config SUNXI_SRAM
 	  Say y here to enable the SRAM controller support. This
 	  device is responsible on mapping the SRAM in the sunXi SoCs
 	  whether to the CPU/DMA, or to the devices.
+
+config SUN20I_PPU
+	bool "Allwinner D1 PPU power domain driver"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	select PM_GENERIC_DOMAINS
+	help
+	  Say y to enable the PPU power domain driver. This saves power
+	  when certain peripherals, such as the video engine, are idle.
+	  All power domains are on by default, so this is optional.
diff --git a/drivers/soc/sunxi/Makefile b/drivers/soc/sunxi/Makefile
index 549159571d4f..90ff2ebe7655 100644
--- a/drivers/soc/sunxi/Makefile
+++ b/drivers/soc/sunxi/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_SUNXI_MBUS) +=	sunxi_mbus.o
 obj-$(CONFIG_SUNXI_SRAM) +=	sunxi_sram.o
+obj-$(CONFIG_SUN20I_PPU) +=	sun20i-ppu.o
diff --git a/drivers/soc/sunxi/sun20i-ppu.c b/drivers/soc/sunxi/sun20i-ppu.c
new file mode 100644
index 000000000000..98cb41d36560
--- /dev/null
+++ b/drivers/soc/sunxi/sun20i-ppu.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/reset.h>
+
+#define PD_STATE_ON			1
+#define PD_STATE_OFF			2
+
+#define PD_RSTN_REG			0x00
+#define PD_CLK_GATE_REG			0x04
+#define PD_PWROFF_GATE_REG		0x08
+#define PD_PSW_ON_REG			0x0c
+#define PD_PSW_OFF_REG			0x10
+#define PD_PSW_DELAY_REG		0x14
+#define PD_OFF_DELAY_REG		0x18
+#define PD_ON_DELAY_REG			0x1c
+#define PD_COMMAND_REG			0x20
+#define PD_STATUS_REG			0x24
+#define PD_STATUS_COMPLETE			BIT(1)
+#define PD_STATUS_BUSY				BIT(3)
+#define PD_STATUS_STATE				GENMASK(17, 16)
+#define PD_ACTIVE_CTRL_REG		0x2c
+#define PD_GATE_STATUS_REG		0x30
+#define PD_RSTN_STATUS				BIT(0)
+#define PD_CLK_GATE_STATUS			BIT(1)
+#define PD_PWROFF_GATE_STATUS			BIT(2)
+#define PD_PSW_STATUS_REG		0x34
+
+#define PD_REGS_SIZE			0x80
+
+struct sun20i_ppu_desc {
+	const char *const		*names;
+	unsigned int			num_domains;
+};
+
+struct sun20i_ppu_pd {
+	struct generic_pm_domain	genpd;
+	void __iomem			*base;
+};
+
+#define to_sun20i_ppu_pd(_genpd) \
+	container_of(_genpd, struct sun20i_ppu_pd, genpd)
+
+static bool sun20i_ppu_pd_is_on(const struct sun20i_ppu_pd *pd)
+{
+	u32 status = readl(pd->base + PD_STATUS_REG);
+
+	return FIELD_GET(PD_STATUS_STATE, status) == PD_STATE_ON;
+}
+
+static int sun20i_ppu_pd_set_power(const struct sun20i_ppu_pd *pd, bool power_on)
+{
+	u32 state, status;
+	int ret;
+
+	if (sun20i_ppu_pd_is_on(pd) == power_on)
+		return 0;
+
+	/* Wait for the power controller to be idle. */
+	ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+				 !(status & PD_STATUS_BUSY), 100, 1000);
+	if (ret)
+		return ret;
+
+	state = power_on ? PD_STATE_ON : PD_STATE_OFF;
+	writel(state, pd->base + PD_COMMAND_REG);
+
+	/* Wait for the state transition to complete. */
+	ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+				 FIELD_GET(PD_STATUS_STATE, status) == state &&
+				 (status & PD_STATUS_COMPLETE), 100, 1000);
+	if (ret)
+		return ret;
+
+	/* Clear the completion flag. */
+	writel(status, pd->base + PD_STATUS_REG);
+
+	return 0;
+}
+
+static int sun20i_ppu_pd_power_on(struct generic_pm_domain *genpd)
+{
+	const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+	return sun20i_ppu_pd_set_power(pd, true);
+}
+
+static int sun20i_ppu_pd_power_off(struct generic_pm_domain *genpd)
+{
+	const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+	return sun20i_ppu_pd_set_power(pd, false);
+}
+
+static int sun20i_ppu_probe(struct platform_device *pdev)
+{
+	const struct sun20i_ppu_desc *desc;
+	struct device *dev = &pdev->dev;
+	struct genpd_onecell_data *ppu;
+	struct sun20i_ppu_pd *pds;
+	struct reset_control *rst;
+	void __iomem *base;
+	struct clk *clk;
+	int ret;
+
+	desc = of_device_get_match_data(dev);
+	if (!desc)
+		return -EINVAL;
+
+	pds = devm_kcalloc(dev, desc->num_domains, sizeof(*pds), GFP_KERNEL);
+	if (!pds)
+		return -ENOMEM;
+
+	ppu = devm_kzalloc(dev, sizeof(*ppu), GFP_KERNEL);
+	if (!ppu)
+		return -ENOMEM;
+
+	ppu->domains = devm_kcalloc(dev, desc->num_domains,
+				    sizeof(*ppu->domains), GFP_KERNEL);
+	if (!ppu->domains)
+		return -ENOMEM;
+
+	ppu->num_domains = desc->num_domains;
+	platform_set_drvdata(pdev, ppu);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(rst))
+		return PTR_ERR(rst);
+
+	ret = reset_control_deassert(rst);
+	if (ret)
+		return ret;
+
+	for (unsigned int i = 0; i < ppu->num_domains; ++i) {
+		struct sun20i_ppu_pd *pd = &pds[i];
+
+		pd->genpd.name		= desc->names[i];
+		pd->genpd.power_off	= sun20i_ppu_pd_power_off;
+		pd->genpd.power_on	= sun20i_ppu_pd_power_on;
+		pd->base		= base + PD_REGS_SIZE * i;
+
+		ret = pm_genpd_init(&pd->genpd, NULL, sun20i_ppu_pd_is_on(pd));
+		if (ret) {
+			dev_warn(dev, "Failed to add '%s' domain: %d\n",
+				 pd->genpd.name, ret);
+			continue;
+		}
+
+		ppu->domains[i] = &pd->genpd;
+	}
+
+	ret = of_genpd_add_provider_onecell(dev->of_node, ppu);
+	if (ret)
+		dev_warn(dev, "Failed to add provider: %d\n", ret);
+
+	return 0;
+}
+
+static const char *const sun20i_d1_ppu_pd_names[] = {
+	"CPU",
+	"VE",
+	"DSP",
+};
+
+static const struct sun20i_ppu_desc sun20i_d1_ppu_desc = {
+	.names		= sun20i_d1_ppu_pd_names,
+	.num_domains	= ARRAY_SIZE(sun20i_d1_ppu_pd_names),
+};
+
+static const struct of_device_id sun20i_ppu_of_match[] = {
+	{
+		.compatible	= "allwinner,sun20i-d1-ppu",
+		.data		= &sun20i_d1_ppu_desc,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sun20i_ppu_of_match);
+
+static struct platform_driver sun20i_ppu_driver = {
+	.probe	= sun20i_ppu_probe,
+	.driver	= {
+		.name			= "sun20i-ppu",
+		.of_match_table		= sun20i_ppu_of_match,
+		/* Power domains cannot be removed while they are in use. */
+		.suppress_bind_attrs	= true,
+	},
+};
+module_platform_driver(sun20i_ppu_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
+MODULE_DESCRIPTION("Allwinner D1 PPU power domain driver");
+MODULE_LICENSE("GPL");
-- 
2.37.4

Re: [PATCH 1/2] dt-bindings: power: Add Allwinner D1 PPU

[Krzysztof Kozlowski]

On 31/12/2022 17:04, Samuel Holland wrote:
> The Allwinner D1 family of SoCs contain a "PPU" power domain controller
> separate from the PRCM. It can power down the video engine and DSP, and
> it contains special logic for hardware-assisted CPU idle. Other recent
> Allwinner SoCs (e.g. TV303) have a PPU with a different set of domains.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> 
>  .../power/allwinner,sun20i-d1-ppu.yaml        | 54 +++++++++++++++++++
>  .../power/allwinner,sun20i-d1-ppu.h           | 10 ++++
>  2 files changed, 64 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
>  create mode 100644 include/dt-bindings/power/allwinner,sun20i-d1-ppu.h
> 
> diff --git a/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
> new file mode 100644
> index 000000000000..64c9a9f398a2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
> @@ -0,0 +1,54 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/allwinner,sun20i-d1-ppu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner SoCs "PPU" power domain controller

Drop quotes over "PPU" - it's not some nickname, alias, but acronym.
Explain the acronym in description.


> +
> +maintainers:
> +  - Samuel Holland <samuel@sholland.org>
> +
> +description:
> +  D1 and related SoCs contain a power domain controller for the CPUs, GPU, and
> +  video-related hardware.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - allwinner,sun20i-d1-ppu
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description: Bus Clock
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  '#power-domain-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - resets
> +  - '#power-domain-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/sun20i-d1-r-ccu.h>
> +    #include <dt-bindings/reset/sun20i-d1-r-ccu.h>
> +
> +    ppu: power-controller@7001000 {
> +            compatible = "allwinner,sun20i-d1-ppu";

Use 4 spaces for example indentation.

With above:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH 1/2] dt-bindings: power: Add Allwinner D1 PPU

[Samuel Holland]

On 12/31/22 12:58, Krzysztof Kozlowski wrote:
> On 31/12/2022 17:04, Samuel Holland wrote:
>> The Allwinner D1 family of SoCs contain a "PPU" power domain controller
>> separate from the PRCM. It can power down the video engine and DSP, and
>> it contains special logic for hardware-assisted CPU idle. Other recent
>> Allwinner SoCs (e.g. TV303) have a PPU with a different set of domains.
>>
>> Signed-off-by: Samuel Holland <samuel@sholland.org>
>> ---
>>
>>  .../power/allwinner,sun20i-d1-ppu.yaml        | 54 +++++++++++++++++++
>>  .../power/allwinner,sun20i-d1-ppu.h           | 10 ++++
>>  2 files changed, 64 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
>>  create mode 100644 include/dt-bindings/power/allwinner,sun20i-d1-ppu.h
>>
>> diff --git a/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
>> new file mode 100644
>> index 000000000000..64c9a9f398a2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml
>> @@ -0,0 +1,54 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/power/allwinner,sun20i-d1-ppu.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Allwinner SoCs "PPU" power domain controller
> 
> Drop quotes over "PPU" - it's not some nickname, alias, but acronym.
> Explain the acronym in description.

I don't know what the acronym stands for; it is never spelled out in the
vendor code. I will drop the quotes in v2, but I can't give an explanation.

Regards,
Samuel

Re: [PATCH 0/2] Allwinner power domain support

[Jernej Škrabec]

Dne sobota, 31. december 2022 ob 17:04:00 CET je Samuel Holland napisal(a):
> This series adds support for the power controller found in D1 and other
> recent Allwinner SoCs. There is no first-party documentation, but there
> are a couple of vendor drivers for different hardware revisions[1][2],
> and the register definitions were easy to verify empirically.
> 
> I have tested this driver on D1 with the video engine. There is no DT
> update patch here to avoid dependencies between series. The example in
> the binding is what will go in the D1 DT.

So such driver is needed for H616 for GPU? Or is power domain handling 
different there?

Best regards,
Jernej

> 
> [1]:
> https://github.com/mangopi-sbc/tina-linux-5.4/blob/main/drivers/soc/sunxi/g
> pu_domain.c [1]:
> https://github.com/mangopi-sbc/tina-linux-5.4/blob/main/drivers/soc/sunxi/p
> m_domains.c
> 
> 
> Samuel Holland (2):
>   dt-bindings: power: Add Allwinner D1 PPU
>   soc: sunxi: Add Allwinner D1 PPU driver
> 
>  .../power/allwinner,sun20i-d1-ppu.yaml        |  54 +++++
>  drivers/soc/sunxi/Kconfig                     |   9 +
>  drivers/soc/sunxi/Makefile                    |   1 +
>  drivers/soc/sunxi/sun20i-ppu.c                | 207 ++++++++++++++++++
>  .../power/allwinner,sun20i-d1-ppu.h           |  10 +
>  5 files changed, 281 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml create
> mode 100644 drivers/soc/sunxi/sun20i-ppu.c
>  create mode 100644 include/dt-bindings/power/allwinner,sun20i-d1-ppu.h

Re: [PATCH 2/2] soc: sunxi: Add Allwinner D1 PPU driver

[Jernej Škrabec]

Dne sobota, 31. december 2022 ob 17:04:02 CET je Samuel Holland napisal(a):
> The PPU contains a series of identical MMIO register ranges, one for
> each power domain. Each range contains control/status bits for a clock
> gate, reset line, output gates, and a power switch. (The clock and reset
> are separate from, and in addition to, the bits in the CCU.) It also
> contains a hardware power sequence engine to control the other bits.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> 
>  drivers/soc/sunxi/Kconfig      |   9 ++
>  drivers/soc/sunxi/Makefile     |   1 +
>  drivers/soc/sunxi/sun20i-ppu.c | 207 +++++++++++++++++++++++++++++++++
>  3 files changed, 217 insertions(+)
>  create mode 100644 drivers/soc/sunxi/sun20i-ppu.c
> 
> diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
> index 8aecbc9b1976..5e84cf4b8510 100644
> --- a/drivers/soc/sunxi/Kconfig
> +++ b/drivers/soc/sunxi/Kconfig
> @@ -19,3 +19,12 @@ config SUNXI_SRAM
>  	  Say y here to enable the SRAM controller support. This
>  	  device is responsible on mapping the SRAM in the sunXi SoCs
>  	  whether to the CPU/DMA, or to the devices.
> +
> +config SUN20I_PPU
> +	bool "Allwinner D1 PPU power domain driver"
> +	depends on ARCH_SUNXI || COMPILE_TEST
> +	select PM_GENERIC_DOMAINS
> +	help
> +	  Say y to enable the PPU power domain driver. This saves power
> +	  when certain peripherals, such as the video engine, are idle.
> +	  All power domains are on by default, so this is optional.

If this driver will gain support for other SoCs, above statement might not be 
true anymore. One such example is GPU on H616 (if PPU is compatible).

Other than that, driver looks good:
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> diff --git a/drivers/soc/sunxi/Makefile b/drivers/soc/sunxi/Makefile
> index 549159571d4f..90ff2ebe7655 100644
> --- a/drivers/soc/sunxi/Makefile
> +++ b/drivers/soc/sunxi/Makefile
> @@ -1,3 +1,4 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  obj-$(CONFIG_SUNXI_MBUS) +=	sunxi_mbus.o
>  obj-$(CONFIG_SUNXI_SRAM) +=	sunxi_sram.o
> +obj-$(CONFIG_SUN20I_PPU) +=	sun20i-ppu.o
> diff --git a/drivers/soc/sunxi/sun20i-ppu.c b/drivers/soc/sunxi/sun20i-ppu.c
> new file mode 100644
> index 000000000000..98cb41d36560
> --- /dev/null
> +++ b/drivers/soc/sunxi/sun20i-ppu.c
> @@ -0,0 +1,207 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/reset.h>
> +
> +#define PD_STATE_ON			1
> +#define PD_STATE_OFF			2
> +
> +#define PD_RSTN_REG			0x00
> +#define PD_CLK_GATE_REG			0x04
> +#define PD_PWROFF_GATE_REG		0x08
> +#define PD_PSW_ON_REG			0x0c
> +#define PD_PSW_OFF_REG			0x10
> +#define PD_PSW_DELAY_REG		0x14
> +#define PD_OFF_DELAY_REG		0x18
> +#define PD_ON_DELAY_REG			0x1c
> +#define PD_COMMAND_REG			0x20
> +#define PD_STATUS_REG			0x24
> +#define PD_STATUS_COMPLETE			BIT(1)
> +#define PD_STATUS_BUSY				BIT(3)
> +#define PD_STATUS_STATE				
GENMASK(17, 16)
> +#define PD_ACTIVE_CTRL_REG		0x2c
> +#define PD_GATE_STATUS_REG		0x30
> +#define PD_RSTN_STATUS				BIT(0)
> +#define PD_CLK_GATE_STATUS			BIT(1)
> +#define PD_PWROFF_GATE_STATUS			BIT(2)
> +#define PD_PSW_STATUS_REG		0x34
> +
> +#define PD_REGS_SIZE			0x80
> +
> +struct sun20i_ppu_desc {
> +	const char *const		*names;
> +	unsigned int			num_domains;
> +};
> +
> +struct sun20i_ppu_pd {
> +	struct generic_pm_domain	genpd;
> +	void __iomem			*base;
> +};
> +
> +#define to_sun20i_ppu_pd(_genpd) \
> +	container_of(_genpd, struct sun20i_ppu_pd, genpd)
> +
> +static bool sun20i_ppu_pd_is_on(const struct sun20i_ppu_pd *pd)
> +{
> +	u32 status = readl(pd->base + PD_STATUS_REG);
> +
> +	return FIELD_GET(PD_STATUS_STATE, status) == PD_STATE_ON;
> +}
> +
> +static int sun20i_ppu_pd_set_power(const struct sun20i_ppu_pd *pd, bool
> power_on) +{
> +	u32 state, status;
> +	int ret;
> +
> +	if (sun20i_ppu_pd_is_on(pd) == power_on)
> +		return 0;
> +
> +	/* Wait for the power controller to be idle. */
> +	ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
> +				 !(status & PD_STATUS_BUSY), 100, 
1000);
> +	if (ret)
> +		return ret;
> +
> +	state = power_on ? PD_STATE_ON : PD_STATE_OFF;
> +	writel(state, pd->base + PD_COMMAND_REG);
> +
> +	/* Wait for the state transition to complete. */
> +	ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
> +				 FIELD_GET(PD_STATUS_STATE, 
status) == state &&
> +				 (status & PD_STATUS_COMPLETE), 
100, 1000);
> +	if (ret)
> +		return ret;
> +
> +	/* Clear the completion flag. */
> +	writel(status, pd->base + PD_STATUS_REG);
> +
> +	return 0;
> +}
> +
> +static int sun20i_ppu_pd_power_on(struct generic_pm_domain *genpd)
> +{
> +	const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
> +
> +	return sun20i_ppu_pd_set_power(pd, true);
> +}
> +
> +static int sun20i_ppu_pd_power_off(struct generic_pm_domain *genpd)
> +{
> +	const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
> +
> +	return sun20i_ppu_pd_set_power(pd, false);
> +}
> +
> +static int sun20i_ppu_probe(struct platform_device *pdev)
> +{
> +	const struct sun20i_ppu_desc *desc;
> +	struct device *dev = &pdev->dev;
> +	struct genpd_onecell_data *ppu;
> +	struct sun20i_ppu_pd *pds;
> +	struct reset_control *rst;
> +	void __iomem *base;
> +	struct clk *clk;
> +	int ret;
> +
> +	desc = of_device_get_match_data(dev);
> +	if (!desc)
> +		return -EINVAL;
> +
> +	pds = devm_kcalloc(dev, desc->num_domains, sizeof(*pds), 
GFP_KERNEL);
> +	if (!pds)
> +		return -ENOMEM;
> +
> +	ppu = devm_kzalloc(dev, sizeof(*ppu), GFP_KERNEL);
> +	if (!ppu)
> +		return -ENOMEM;
> +
> +	ppu->domains = devm_kcalloc(dev, desc->num_domains,
> +				    sizeof(*ppu->domains), 
GFP_KERNEL);
> +	if (!ppu->domains)
> +		return -ENOMEM;
> +
> +	ppu->num_domains = desc->num_domains;
> +	platform_set_drvdata(pdev, ppu);
> +
> +	base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(base))
> +		return PTR_ERR(base);
> +
> +	clk = devm_clk_get_enabled(dev, NULL);
> +	if (IS_ERR(clk))
> +		return PTR_ERR(clk);
> +
> +	rst = devm_reset_control_get_exclusive(dev, NULL);
> +	if (IS_ERR(rst))
> +		return PTR_ERR(rst);
> +
> +	ret = reset_control_deassert(rst);
> +	if (ret)
> +		return ret;
> +
> +	for (unsigned int i = 0; i < ppu->num_domains; ++i) {
> +		struct sun20i_ppu_pd *pd = &pds[i];
> +
> +		pd->genpd.name		= desc->names[i];
> +		pd->genpd.power_off	= sun20i_ppu_pd_power_off;
> +		pd->genpd.power_on	= sun20i_ppu_pd_power_on;
> +		pd->base		= base + PD_REGS_SIZE * i;
> +
> +		ret = pm_genpd_init(&pd->genpd, NULL, 
sun20i_ppu_pd_is_on(pd));
> +		if (ret) {
> +			dev_warn(dev, "Failed to add '%s' domain: 
%d\n",
> +				 pd->genpd.name, ret);
> +			continue;
> +		}
> +
> +		ppu->domains[i] = &pd->genpd;
> +	}
> +
> +	ret = of_genpd_add_provider_onecell(dev->of_node, ppu);
> +	if (ret)
> +		dev_warn(dev, "Failed to add provider: %d\n", ret);
> +
> +	return 0;
> +}
> +
> +static const char *const sun20i_d1_ppu_pd_names[] = {
> +	"CPU",
> +	"VE",
> +	"DSP",
> +};
> +
> +static const struct sun20i_ppu_desc sun20i_d1_ppu_desc = {
> +	.names		= sun20i_d1_ppu_pd_names,
> +	.num_domains	= ARRAY_SIZE(sun20i_d1_ppu_pd_names),
> +};
> +
> +static const struct of_device_id sun20i_ppu_of_match[] = {
> +	{
> +		.compatible	= "allwinner,sun20i-d1-ppu",
> +		.data		= &sun20i_d1_ppu_desc,
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, sun20i_ppu_of_match);
> +
> +static struct platform_driver sun20i_ppu_driver = {
> +	.probe	= sun20i_ppu_probe,
> +	.driver	= {
> +		.name			= "sun20i-ppu",
> +		.of_match_table		= 
sun20i_ppu_of_match,
> +		/* Power domains cannot be removed while they are in 
use. */
> +		.suppress_bind_attrs	= true,
> +	},
> +};
> +module_platform_driver(sun20i_ppu_driver);
> +
> +MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
> +MODULE_DESCRIPTION("Allwinner D1 PPU power domain driver");
> +MODULE_LICENSE("GPL");

Re: [PATCH 0/2] Allwinner power domain support

[Samuel Holland]

Hi Jernej,

On 1/5/23 10:34, Jernej Škrabec wrote:
> Dne sobota, 31. december 2022 ob 17:04:00 CET je Samuel Holland napisal(a):
>> This series adds support for the power controller found in D1 and other
>> recent Allwinner SoCs. There is no first-party documentation, but there
>> are a couple of vendor drivers for different hardware revisions[1][2],
>> and the register definitions were easy to verify empirically.
>>
>> I have tested this driver on D1 with the video engine. There is no DT
>> update patch here to avoid dependencies between series. The example in
>> the binding is what will go in the D1 DT.
> 
> So such driver is needed for H616 for GPU? Or is power domain handling 
> different there?

H616 does not appear to have a PPU. The PRCM gates otherwise match A100,
but there are no settable gate/reset bits at 0x17c, and the registers at
0x7001000 read as zero, even after being written. I believe H616 uses
only GPU_PWROFF_GATING_REG in the PRCM.

Regards,
Samuel