From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 5ED4D15C3 for ; Mon, 9 Jan 2023 01:22:37 +0000 (UTC) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 832281515; Sun, 8 Jan 2023 17:23:13 -0800 (PST) Received: from donnerap.cambridge.arm.com (donnerap.cambridge.arm.com [10.1.197.42]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id EA2013F67D; Sun, 8 Jan 2023 17:22:29 -0800 (PST) From: Andre Przywara To: Vinod Koul , Kishon Vijay Abraham I , Rob Herring , Krzysztof Kozlowski Cc: Icenowy Zheng , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev Subject: [PATCH v5 1/3] dt-bindings: phy: add binding document for Allwinner F1C100s USB PHY Date: Mon, 9 Jan 2023 01:22:21 +0000 Message-Id: <20230109012223.4079299-2-andre.przywara@arm.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20230109012223.4079299-1-andre.przywara@arm.com> References: <20230109012223.4079299-1-andre.przywara@arm.com> Precedence: bulk X-Mailing-List: linux-sunxi@lists.linux.dev List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit From: Icenowy Zheng Allwinner F1C100s has the most simple USB PHY among all Allwinner SoCs, because it has only one OTG USB controller, no host-only OHCI/EHCI controllers. Add a binding document for it. Following the current situation of one YAML file per SoC, this one is based on allwinner,sun8i-v3s-usb-phy.yaml, but with OHCI/EHCI-related bits removed. (The same driver in Linux, phy-sun4i-usb, covers all these binding files now.) Signed-off-by: Icenowy Zheng Reviewed-by: Rob Herring Reviewed-by: Andre Przywara Reviewed-by: Samuel Holland Signed-off-by: Andre Przywara --- .../phy/allwinner,suniv-f1c100s-usb-phy.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml diff --git a/Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml new file mode 100644 index 0000000000000..9488394992350 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,suniv-f1c100s-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner F1C100s USB PHY + +maintainers: + - Chen-Yu Tsai + - Maxime Ripard + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,suniv-f1c100s-usb-phy + + reg: + maxItems: 1 + description: PHY Control registers + + reg-names: + const: phy_ctrl + + clocks: + maxItems: 1 + description: USB OTG PHY bus clock + + clock-names: + const: usb0_phy + + resets: + maxItems: 1 + description: USB OTG reset + + reset-names: + const: usb0_reset + + usb0_id_det-gpios: + maxItems: 1 + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + maxItems: 1 + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + + phy@1c13400 { + compatible = "allwinner,suniv-f1c100s-usb-phy"; + reg = <0x01c13400 0x10>; + reg-names = "phy_ctrl"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + #phy-cells = <1>; + usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; + }; -- 2.25.1