linux-sunxi.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Andre Przywara <andre.przywara@arm.com>
Cc: Rob Herring <robh@kernel.org>, Icenowy Zheng <icenowy@aosc.io>,
	Samuel Holland <samuel@sholland.org>,
	Ondrej Jirman <megous@megous.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@googlegroups.com, linux-sunxi@lists.linux.dev,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v6 17/17] arm64: dts: allwinner: h616: Add X96 Mate TV box support
Date: Sat, 22 May 2021 09:32:32 +0200	[thread overview]
Message-ID: <2338288.Zx76mVtT47@kista> (raw)
In-Reply-To: <20210519104152.21119-18-andre.przywara@arm.com>

Hi Andre!

Dne sreda, 19. maj 2021 ob 12:41:52 CEST je Andre Przywara napisal(a):
> The X96 Mate is an Allwinner H616 based TV box, featuring:
>   - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
>   - 2GiB/4GiB RAM (fully usable!)
>   - 16/32/64GiB eMMC
>   - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported)
>   - Unsupported Allwinner WiFi chip
>   - 2 x USB 2.0 host ports
>   - HDMI port
>   - IR receiver
>   - 5V/2A DC power supply via barrel plug
> 
> For more information see: https://linux-sunxi.org/X96_Mate
> 
> Add a basic devicetree for it, with SD card, eMMC and USB working, as
> well as serial and the essential peripherals, like the AXP PMIC.
> 
> This DT is somewhat minimal, and should work on many other similar TV
> boxes with the Allwinner H616 chip.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
>  .../dts/allwinner/sun50i-h616-x96-mate.dts    | 201 ++++++++++++++++++
>  2 files changed, 202 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
> 
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/
allwinner/Makefile
> index 9ba4b5d92657..370d24ebaacf 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -37,3 +37,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts b/arch/
arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
> new file mode 100644
> index 000000000000..b960bb310289
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-x96-mate.dts
> @@ -0,0 +1,201 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2021 Arm Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	model = "X96 Mate";
> +	compatible = "hechuang,x96-mate", "allwinner,sun50i-h616";

Please document compatible.

Best regards,
Jernej

> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	reg_vcc5v: vcc5v {
> +		/* board wide 5V supply directly from the DC input */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-5v";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +};
> +
> +&ehci0 {
> +	status = "okay";
> +};
> +
> +&ehci2 {
> +	status = "okay";
> +};
> +
> +&ir {
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&reg_dcdce>;
> +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&mmc2 {
> +	vmmc-supply = <&reg_dcdce>;
> +	vqmmc-supply = <&reg_bldo1>;
> +	bus-width = <8>;
> +	non-removable;
> +	cap-mmc-hw-reset;
> +	mmc-hs200-1_8v;
> +	status = "okay";
> +};
> +
> +&ohci0 {
> +	status = "okay";
> +};
> +
> +&ohci2 {
> +	status = "okay";
> +};
> +
> +&r_rsb {
> +	status = "okay";
> +
> +	axp305: pmic@745 {
> +		compatible = "x-powers,axp305", "x-powers,axp805",
> +			     "x-powers,axp806";
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +		reg = <0x745>;
> +
> +		x-powers,self-working-mode;
> +		vina-supply = <&reg_vcc5v>;
> +		vinb-supply = <&reg_vcc5v>;
> +		vinc-supply = <&reg_vcc5v>;
> +		vind-supply = <&reg_vcc5v>;
> +		vine-supply = <&reg_vcc5v>;
> +		aldoin-supply = <&reg_vcc5v>;
> +		bldoin-supply = <&reg_vcc5v>;
> +		cldoin-supply = <&reg_vcc5v>;
> +
> +		regulators {
> +			reg_aldo1: aldo1 {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<3300000>;
> +				regulator-max-microvolt = 
<3300000>;
> +				regulator-name = "vcc-sys";
> +			};
> +
> +			/* Enabled by the Android BSP */
> +			reg_aldo2: aldo2 {
> +				regulator-min-microvolt = 
<3300000>;
> +				regulator-max-microvolt = 
<3300000>;
> +				regulator-name = "vcc3v3-ext";
> +				status = "disabled";
> +			};
> +
> +			/* Enabled by the Android BSP */
> +			reg_aldo3: aldo3 {
> +				regulator-min-microvolt = 
<3300000>;
> +				regulator-max-microvolt = 
<3300000>;
> +				regulator-name = "vcc3v3-ext2";
> +				status = "disabled";
> +			};
> +
> +			reg_bldo1: bldo1 {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<1800000>;
> +				regulator-max-microvolt = 
<1800000>;
> +				regulator-name = "vcc1v8";
> +			};
> +
> +			/* Enabled by the Android BSP */
> +			reg_bldo2: bldo2 {
> +				regulator-min-microvolt = 
<1800000>;
> +				regulator-max-microvolt = 
<1800000>;
> +				regulator-name = "vcc1v8-2";
> +				status = "disabled";
> +			};
> +
> +			bldo3 {
> +				/* unused */
> +			};
> +
> +			bldo4 {
> +				/* unused */
> +			};
> +
> +			cldo1 {
> +				regulator-min-microvolt = 
<2500000>;
> +				regulator-max-microvolt = 
<2500000>;
> +				regulator-name = "vcc2v5";
> +			};
> +
> +			cldo2 {
> +				/* unused */
> +			};
> +
> +			cldo3 {
> +				/* unused */
> +			};
> +
> +			reg_dcdca: dcdca {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<810000>;
> +				regulator-max-microvolt = 
<1080000>;
> +				regulator-name = "vdd-cpu";
> +			};
> +
> +			reg_dcdcc: dcdcc {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<810000>;
> +				regulator-max-microvolt = 
<1080000>;
> +				regulator-name = "vdd-gpu-sys";
> +			};
> +
> +			reg_dcdcd: dcdcd {
> +				regulator-always-on;
> +				regulator-min-microvolt = 
<1360000>;
> +				regulator-max-microvolt = 
<1360000>;
> +				regulator-name = "vdd-dram";
> +			};
> +
> +			reg_dcdce: dcdce {
> +				regulator-boot-on;
> +				regulator-min-microvolt = 
<3300000>;
> +				regulator-max-microvolt = 
<3300000>;
> +				regulator-name = "vcc-eth-mmc";
> +			};
> +
> +			sw {
> +				/* unused */
> +			};
> +		};
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_ph_pins>;
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	dr_mode = "host";	/* USB A type receptable */
> +	status = "okay";
> +};
> +
> +&usbphy {
> +	status = "okay";
> +};
> -- 
> 2.17.5
> 
> 



      reply	other threads:[~2021-05-22  7:32 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-19 10:41 [PATCH v6 00/17] arm64: sunxi: Initial Allwinner H616 SoC support Andre Przywara
2021-05-19 10:41 ` [PATCH v6 01/17] dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ) Andre Przywara
2021-05-21  1:39   ` Rob Herring
2021-05-22 14:46   ` Samuel Holland
2021-05-23  0:01     ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 02/17] mfd: axp20x: Allow AXP 806 chips without interrupt lines Andre Przywara
2021-05-19 15:01   ` Lee Jones
2021-05-19 10:41 ` [PATCH v6 03/17] dt-bindings: rtc: sun6i: Add H616 compatible string Andre Przywara
2021-05-21  1:39   ` Rob Herring
2021-05-21  2:37   ` Samuel Holland
2021-06-07 12:59     ` Andre Przywara
2021-06-08  4:23       ` Samuel Holland
2021-06-15 12:24         ` Andre Przywara
2021-06-16  9:07           ` Maxime Ripard
2021-06-16 11:28             ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 04/17] rtc: sun6i: Add support for linear day storage Andre Przywara
2021-05-22  7:26   ` Jernej Škrabec
2021-05-19 10:41 ` [PATCH v6 05/17] rtc: sun6i: Add Allwinner H616 support Andre Przywara
2021-05-22  7:29   ` Jernej Škrabec
2021-05-23  0:06     ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 06/17] dt-bindings: net: sun8i-emac: Add H616 compatible string Andre Przywara
2021-05-21  1:40   ` Rob Herring
2021-05-19 10:41 ` [PATCH v6 07/17] net: stmmac: dwmac-sun8i: Prepare for second EMAC clock register Andre Przywara
2021-05-19 10:41 ` [PATCH v6 08/17] dt-bindings: usb: Add H616 compatible string Andre Przywara
2021-05-21  1:40   ` Rob Herring
2021-05-19 10:41 ` [PATCH v6 09/17] dt-bindings: usb: sunxi-musb: " Andre Przywara
2021-05-21  1:40   ` Rob Herring
2021-05-19 10:41 ` [PATCH v6 10/17] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling Andre Przywara
2021-05-19 10:41 ` [PATCH v6 11/17] phy: sun4i-usb: Allow reset line to be shared Andre Przywara
2021-05-19 10:41 ` [PATCH v6 12/17] phy: sun4i-usb: Introduce port2 SIDDQ quirk Andre Przywara
2021-05-24 11:59   ` Maxime Ripard
2021-05-24 12:51     ` Jernej Škrabec
2021-05-25 11:29     ` Andre Przywara
2021-06-07 13:22       ` Maxime Ripard
2021-06-07 14:17         ` Andre Przywara
2021-06-07 14:26           ` [linux-sunxi] " Chen-Yu Tsai
2021-06-14  0:20             ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 13/17] phy: sun4i-usb: Add support for the H616 USB PHY Andre Przywara
2021-05-19 10:41 ` [PATCH v6 14/17] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Andre Przywara
2021-05-24 12:02   ` Maxime Ripard
2021-06-07 12:59     ` Andre Przywara
2021-05-19 10:41 ` [PATCH v6 15/17] dt-bindings: arm: sunxi: Add OrangePi Zero 2 binding Andre Przywara
2021-05-19 10:41 ` [PATCH v6 16/17] arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support Andre Przywara
2021-05-19 10:41 ` [PATCH v6 17/17] arm64: dts: allwinner: h616: Add X96 Mate TV box support Andre Przywara
2021-05-22  7:32   ` Jernej Škrabec [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2338288.Zx76mVtT47@kista \
    --to=jernej.skrabec@gmail.com \
    --cc=andre.przywara@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=icenowy@aosc.io \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=megous@megous.com \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@csie.org \
    --subject='Re: [PATCH v6 17/17] arm64: dts: allwinner: h616: Add X96 Mate TV box support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).