From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: andre.przywara@arm.com
Cc: jagan@amarulasolutions.com, u-boot@lists.denx.de,
linux-sunxi@lists.linux.dev
Subject: Re: [PATCH] configs: OrangePi PC2: Update defaults
Date: Sat, 12 Jun 2021 07:50:27 +0200 [thread overview]
Message-ID: <2418795.6bcLzA2rA2@kista> (raw)
In-Reply-To: <20210607174245.480188-1-jernej.skrabec@gmail.com>
Dne ponedeljek, 07. junij 2021 ob 19:42:45 CEST je Jernej Skrabec napisal(a):
> OrangePi PC2 board has DRAM with ODT, so enable it. ZQ value is also
> slightly different in vendor images, so update it as well. H5 SoC is
> also connected to voltage regulator. It's default value is pretty low,
> so in order to avoid instability, enable driver for it and set it to
> appropriate voltage.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> ---
> configs/orangepi_pc2_defconfig | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/configs/orangepi_pc2_defconfig b/configs/orangepi_pc2_defconfig
> index f72ffe27b26c..5e4cca793f53 100644
> --- a/configs/orangepi_pc2_defconfig
> +++ b/configs/orangepi_pc2_defconfig
> @@ -3,13 +3,15 @@ CONFIG_ARCH_SUNXI=y
> CONFIG_SPL=y
> CONFIG_MACH_SUN50I_H5=y
> CONFIG_DRAM_CLK=672
> -CONFIG_DRAM_ZQ=3881977
> -# CONFIG_DRAM_ODT_EN is not set
> +CONFIG_DRAM_ZQ=4145117
> CONFIG_MACPWR="PD6"
> CONFIG_SPL_SPI_SUNXI=y
> +CONFIG_SPL_I2C_SUPPORT=y
> CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-pc2"
> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> CONFIG_SUN8I_EMAC=y
> +CONFIG_SY8106A_POWER=y
> +CONFIG_SY8106A_VOUT1_VOLT=1100
I'm not sure if voltage regulator adjustment needs to be enabled. By default,
it's set to 1.1 V using resistor divider. However, it can be still needed if
board is rebooted and OS set it to lower value before reboot.
Best regards,
Jernej
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_OHCI_HCD=y
> CONFIG_USB_MUSB_GADGET=y
> --
> 2.31.1
>
>
next prev parent reply other threads:[~2021-06-12 5:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-07 17:42 [PATCH] configs: OrangePi PC2: Update defaults Jernej Skrabec
2021-06-12 5:50 ` Jernej Škrabec [this message]
2021-06-12 6:08 ` Jernej Škrabec
2021-06-13 23:25 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2418795.6bcLzA2rA2@kista \
--to=jernej.skrabec@gmail.com \
--cc=andre.przywara@arm.com \
--cc=jagan@amarulasolutions.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).