Linux-Tegra Archive on lore.kernel.org
 help / color / Atom feed
* [RFC PATCH v4 00/14] Support for Tegra video capture from external sensor
@ 2020-07-23 23:50 Sowjanya Komatineni
  2020-07-23 23:50 ` [RFC PATCH v4 01/14] i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM Sowjanya Komatineni
                   ` (9 more replies)
  0 siblings, 10 replies; 24+ messages in thread
From: Sowjanya Komatineni @ 2020-07-23 23:50 UTC (permalink / raw)
  To: skomatineni, thierry.reding, jonathanh, frankc, hverkuil,
	sakari.ailus, robh+dt, helen.koike
  Cc: digetx, sboyd, gregkh, linux-media, devicetree, linux-tegra,
	linux-kernel, linux-i2c

This series adds support for video capture from external camera sensor to
Tegra video driver.

Jetson TX1 has camera expansion connector and supports custom camera module
designed as per TX1 design specification.

This series also enables camera capture support for Jetson Nano which has
Raspberry PI camera header.

This series is tested with IMX219 camera sensor.

This series include,

VI I2C related fixes
- Camera sensor programming happens through VI I2C which is on host1x bus.
- These patches includes device tree and I2C driver fixes for VI I2C.

Tegra video driver updates
- TPG Vs Non-TPG based on Kconfig
- Support for external sensor video capture based on device graph from DT.
- Support for selection ioctl operations
- Tegra MIPI CSI pads calibration
- CSI T-CLK and T-HS settle time computation based on clock rates.

Host1x driver updates
- Adds API to allow creating mipi device for specific device node.
- Splits MIPI pads calibrate start and waiting for calibration to be done.

Device tree updates
- Adds camera connector 2V8, 1V8, 1V2 regulator supplies to Jetson TX1 DT.
- Enabled VI and CSI support in Jetson Nano DT.


Delta between patch versions:
[v4]:	Includes below fix based on v3 feedback
	- Patches are based on latest linux-next.
	- With split of tegra_mipi_calibrate() and tegra_mipi_wait(), mipi
	  clock is not left enabled till calibration done. This series adds
	  a patch to fix this by keeping clock enabled till calibration is
	  done.

	Note:
	Patch-0010 has compilation dependency on
	https://patchwork.kernel.org/patch/11659521/

[v3]:	Includes v2 feedback
	- Uses separate helper function for retrieving remote csi subdevice
	  and source subdevice.
	- Added check for presence of subdevice ops set/get_selection
	- dropped vb2_queue_release from driver and using
	  vb2_video_unregister_device instead of video_unregister_device.
	- video device register should happen in the last after all video
	  device related setup is done in the driver. This is being addressed
	  in below RFC patch. Once proper implementation of this is available
	  will update Tegra video driver to use split APIs and do all setup
	  prior to device register. Added this as TODO in the driver.
	  https://www.spinics.net/lists/linux-media/msg172761.html

	Note:
	Patch-0012 has compilation dependency on
	https://patchwork.kernel.org/patch/11659521/


[v2]:	Includes below changes based on v1 feedback
	- dt-binding document and the driver update for device graph to use
	  separate ports for sink endpoint and source endpoint for csi.
	- Use data-lanes endpoint property for csi.
	- Update tegra_mipi_request() to take device node pointer argument
	  rather than adding extra API.
	- Remove checking for clk pointer before clk_disable.


Sowjanya Komatineni (14):
  i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM
  i2c: tegra: Remove NULL pointer check before
    clk_enable/disable/prepare/unprepare
  i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
  i2c: tegra: Fix runtime resume to re-init VI I2C
  i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
  media: tegra-video: Fix channel format alignment
  media: tegra-video: Enable TPG based on kernel config
  media: tegra-video: Update format lookup to offset based
  dt-bindings: tegra: Update VI and CSI bindings with port info
  media: tegra-video: Add support for external sensor capture
  media: tegra-video: Add support for selection ioctl ops
  gpu: host1x: mipi: Keep MIPI clock enabled till calibration is done
  media: tegra-video: Add CSI MIPI pads calibration
  media: tegra-video: Compute settle times based on the clock rate

 .../display/tegra/nvidia,tegra20-host1x.txt        |  92 ++-
 drivers/gpu/drm/tegra/dsi.c                        |   4 +-
 drivers/gpu/host1x/mipi.c                          |  19 +-
 drivers/i2c/busses/i2c-tegra.c                     | 101 +--
 drivers/staging/media/tegra-video/Kconfig          |   7 +
 drivers/staging/media/tegra-video/csi.c            | 258 ++++++-
 drivers/staging/media/tegra-video/csi.h            |   8 +
 drivers/staging/media/tegra-video/tegra210.c       |  25 +-
 drivers/staging/media/tegra-video/vi.c             | 800 +++++++++++++++++++--
 drivers/staging/media/tegra-video/vi.h             |  25 +-
 drivers/staging/media/tegra-video/video.c          |  23 +-
 include/linux/host1x.h                             |   5 +-
 12 files changed, 1224 insertions(+), 143 deletions(-)

-- 
2.7.4

^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, back to index

Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-23 23:50 [RFC PATCH v4 00/14] Support for Tegra video capture from external sensor Sowjanya Komatineni
2020-07-23 23:50 ` [RFC PATCH v4 01/14] i2c: tegra: Don't mark VI I2C as IRQ safe runtime PM Sowjanya Komatineni
2020-07-26 23:30   ` Dmitry Osipenko
2020-07-23 23:51 ` [RFC PATCH v4 03/14] i2c: tegra: Fix the error path in tegra_i2c_runtime_resume Sowjanya Komatineni
2020-07-26 23:41   ` Dmitry Osipenko
2020-07-23 23:51 ` [RFC PATCH v4 04/14] i2c: tegra: Fix runtime resume to re-init VI I2C Sowjanya Komatineni
2020-07-26 23:53   ` Dmitry Osipenko
2020-07-27 20:58     ` Sowjanya Komatineni
2020-07-23 23:51 ` [RFC PATCH v4 05/14] i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c Sowjanya Komatineni
2020-07-26 23:57   ` Dmitry Osipenko
2020-07-23 23:51 ` [RFC PATCH v4 06/14] media: tegra-video: Fix channel format alignment Sowjanya Komatineni
2020-07-23 23:51 ` [RFC PATCH v4 07/14] media: tegra-video: Enable TPG based on kernel config Sowjanya Komatineni
     [not found] ` <1595548272-9809-1-git-send-email-skomatineni-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2020-07-23 23:51   ` [RFC PATCH v4 02/14] i2c: tegra: Remove NULL pointer check before clk_enable/disable/prepare/unprepare Sowjanya Komatineni
2020-07-23 23:51   ` [RFC PATCH v4 08/14] media: tegra-video: Update format lookup to offset based Sowjanya Komatineni
2020-07-23 23:51   ` [RFC PATCH v4 09/14] dt-bindings: tegra: Update VI and CSI bindings with port info Sowjanya Komatineni
2020-07-23 23:51   ` [RFC PATCH v4 10/14] media: tegra-video: Add support for external sensor capture Sowjanya Komatineni
2020-07-23 23:51   ` [RFC PATCH v4 12/14] gpu: host1x: mipi: Keep MIPI clock enabled till calibration is done Sowjanya Komatineni
2020-07-27  0:10     ` Dmitry Osipenko
2020-07-23 23:51   ` [RFC PATCH v4 14/14] media: tegra-video: Compute settle times based on the clock rate Sowjanya Komatineni
2020-07-23 23:51 ` [RFC PATCH v4 11/14] media: tegra-video: Add support for selection ioctl ops Sowjanya Komatineni
2020-07-23 23:51 ` [RFC PATCH v4 13/14] media: tegra-video: Add CSI MIPI pads calibration Sowjanya Komatineni
2020-07-24  9:43 ` [RFC PATCH v4 00/14] Support for Tegra video capture from external sensor Hans Verkuil
2020-07-24 19:16   ` Wolfram Sang
2020-07-27  0:25   ` Dmitry Osipenko

Linux-Tegra Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-tegra/0 linux-tegra/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-tegra linux-tegra/ https://lore.kernel.org/linux-tegra \
		linux-tegra@vger.kernel.org
	public-inbox-index linux-tegra

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-tegra


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git