Hi Sowjanya, I love your patch! Perhaps something to improve: [auto build test WARNING on tegra/for-next] [also build test WARNING on robh/for-next v5.8 next-20200803] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch] url: https://github.com/0day-ci/linux/commits/Sowjanya-Komatineni/Fix-timeout-clock-used-by-hardware-data-timeout/20200804-034552 base: https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux.git for-next config: arm-defconfig (attached as .config) compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0 reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # save the attached .config to linux build tree COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm If you fix the issue, kindly add following tag as appropriate Reported-by: kernel test robot All warnings (new ones prefixed by >>): drivers/mmc/host/sdhci-tegra.c: In function 'sdhci_tegra_probe': >> drivers/mmc/host/sdhci-tegra.c:1622:7: warning: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Wparentheses] 1622 | (!soc_data->pdata->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { | ^~~~~~~~~~~~~~~~~~~~~~~~ vim +1622 drivers/mmc/host/sdhci-tegra.c 1542 1543 static int sdhci_tegra_probe(struct platform_device *pdev) 1544 { 1545 const struct of_device_id *match; 1546 const struct sdhci_tegra_soc_data *soc_data; 1547 struct sdhci_host *host; 1548 struct sdhci_pltfm_host *pltfm_host; 1549 struct sdhci_tegra *tegra_host; 1550 struct clk *clk; 1551 int rc; 1552 1553 match = of_match_device(sdhci_tegra_dt_match, &pdev->dev); 1554 if (!match) 1555 return -EINVAL; 1556 soc_data = match->data; 1557 1558 host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*tegra_host)); 1559 if (IS_ERR(host)) 1560 return PTR_ERR(host); 1561 pltfm_host = sdhci_priv(host); 1562 1563 tegra_host = sdhci_pltfm_priv(pltfm_host); 1564 tegra_host->ddr_signaling = false; 1565 tegra_host->pad_calib_required = false; 1566 tegra_host->pad_control_available = false; 1567 tegra_host->soc_data = soc_data; 1568 1569 if (soc_data->nvquirks & NVQUIRK_NEEDS_PAD_CONTROL) { 1570 rc = tegra_sdhci_init_pinctrl_info(&pdev->dev, tegra_host); 1571 if (rc == 0) 1572 host->mmc_host_ops.start_signal_voltage_switch = 1573 sdhci_tegra_start_signal_voltage_switch; 1574 } 1575 1576 /* Hook to periodically rerun pad calibration */ 1577 if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB) 1578 host->mmc_host_ops.request = tegra_sdhci_request; 1579 1580 host->mmc_host_ops.hs400_enhanced_strobe = 1581 tegra_sdhci_hs400_enhanced_strobe; 1582 1583 if (!host->ops->platform_execute_tuning) 1584 host->mmc_host_ops.execute_tuning = 1585 tegra_sdhci_execute_hw_tuning; 1586 1587 rc = mmc_of_parse(host->mmc); 1588 if (rc) 1589 goto err_parse_dt; 1590 1591 if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50) 1592 host->mmc->caps |= MMC_CAP_1_8V_DDR; 1593 1594 /* HW busy detection is supported, but R1B responses are required. */ 1595 host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_NEED_RSP_BUSY; 1596 1597 tegra_sdhci_parse_dt(host); 1598 1599 tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power", 1600 GPIOD_OUT_HIGH); 1601 if (IS_ERR(tegra_host->power_gpio)) { 1602 rc = PTR_ERR(tegra_host->power_gpio); 1603 goto err_power_req; 1604 } 1605 1606 /* 1607 * Tegra210 has a separate SDMMC_LEGACY_TM clock used for host 1608 * timeout clock and SW can choose TMCLK or SDCLK for hardware 1609 * data timeout through the bit USE_TMCLK_FOR_DATA_TIMEOUT of 1610 * the register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL. 1611 * 1612 * USE_TMCLK_FOR_DATA_TIMEOUT bit default is set to 1 and SDMMC uses 1613 * 12Mhz TMCLK which is advertised in host capability register. 1614 * With TMCLK of 12Mhz provides maximum data timeout period that can 1615 * be achieved is 11s better than using SDCLK for data timeout. 1616 * 1617 * So, TMCLK is set to 12Mhz and kept enabled all the time on SoC's 1618 * supporting SDR104 mode and when not using SDCLK for data timeout. 1619 */ 1620 1621 if ((soc_data->nvquirks & NVQUIRK_ENABLE_SDR104) && > 1622 (!soc_data->pdata->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) { 1623 clk = devm_clk_get(&pdev->dev, "tmclk"); 1624 if (IS_ERR(clk)) { 1625 rc = PTR_ERR(clk); 1626 if (rc == -EPROBE_DEFER) 1627 goto err_power_req; 1628 1629 dev_warn(&pdev->dev, "failed to get tmclk: %d\n", rc); 1630 clk = NULL; 1631 } 1632 1633 clk_set_rate(clk, 12000000); 1634 rc = clk_prepare_enable(clk); 1635 if (rc) { 1636 dev_err(&pdev->dev, 1637 "failed to enable tmclk: %d\n", rc); 1638 goto err_power_req; 1639 } 1640 1641 tegra_host->tmclk = clk; 1642 } 1643 1644 clk = devm_clk_get(mmc_dev(host->mmc), NULL); 1645 if (IS_ERR(clk)) { 1646 rc = PTR_ERR(clk); 1647 1648 if (rc != -EPROBE_DEFER) 1649 dev_err(&pdev->dev, "failed to get clock: %d\n", rc); 1650 1651 goto err_clk_get; 1652 } 1653 clk_prepare_enable(clk); 1654 pltfm_host->clk = clk; 1655 1656 tegra_host->rst = devm_reset_control_get_exclusive(&pdev->dev, 1657 "sdhci"); 1658 if (IS_ERR(tegra_host->rst)) { 1659 rc = PTR_ERR(tegra_host->rst); 1660 dev_err(&pdev->dev, "failed to get reset control: %d\n", rc); 1661 goto err_rst_get; 1662 } 1663 1664 rc = reset_control_assert(tegra_host->rst); 1665 if (rc) 1666 goto err_rst_get; 1667 1668 usleep_range(2000, 4000); 1669 1670 rc = reset_control_deassert(tegra_host->rst); 1671 if (rc) 1672 goto err_rst_get; 1673 1674 usleep_range(2000, 4000); 1675 1676 rc = sdhci_tegra_add_host(host); 1677 if (rc) 1678 goto err_add_host; 1679 1680 return 0; 1681 1682 err_add_host: 1683 reset_control_assert(tegra_host->rst); 1684 err_rst_get: 1685 clk_disable_unprepare(pltfm_host->clk); 1686 err_clk_get: 1687 clk_disable_unprepare(tegra_host->tmclk); 1688 err_power_req: 1689 err_parse_dt: 1690 sdhci_pltfm_free(pdev); 1691 return rc; 1692 } 1693 --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org