Linux-Tegra Archive on lore.kernel.org
 help / color / Atom feed
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
	<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<nkristam@nvidia.com>, JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v4 04/16] phy: tegra: xusb: tegra210: Do not reset UPHY PLL
Date: Fri, 16 Oct 2020 21:07:14 +0800
Message-ID: <20201016130726.1378666-5-jckuo@nvidia.com> (raw)
In-Reply-To: <20201016130726.1378666-1-jckuo@nvidia.com>

Once UPHY PLL hardware power sequencer is enabled, do not assert
reset to PEX/SATA PLLs, otherwise UPHY PLL operation will be broken.
This commit removes reset_control_assert(pcie->rst) and
reset_control_assert(sata->rst) from PEX/SATA UPHY disable procedure.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
v4:
   no change
v3:
   new, was a part of "phy: tegra: xusb: Rearrange UPHY init on Tegra210"

 drivers/phy/tegra/xusb-tegra210.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 4dc9286ec1b8..9bfecdfecf35 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -502,7 +502,6 @@ static void tegra210_pex_uphy_disable(struct tegra_xusb_padctl *padctl)
 	if (--pcie->enable > 0)
 		return;
 
-	reset_control_assert(pcie->rst);
 	clk_disable_unprepare(pcie->pll);
 }
 
@@ -739,7 +738,6 @@ static void tegra210_sata_uphy_disable(struct tegra_xusb_padctl *padctl)
 	if (--sata->enable > 0)
 		return;
 
-	reset_control_assert(sata->rst);
 	clk_disable_unprepare(sata->pll);
 }
 
-- 
2.25.1


  parent reply index

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-16 13:07 [PATCH v4 00/16] Tegra XHCI controller ELPG support JC Kuo
2020-10-16 13:07 ` [PATCH v4 01/16] clk: tegra: Add PLLE HW power sequencer control JC Kuo
2020-10-16 13:07 ` [PATCH v4 02/16] clk: tegra: Don't enable PLLE HW sequencer at init JC Kuo
2020-10-16 13:07 ` [PATCH v4 03/16] phy: tegra: xusb: Move usb3 port init for Tegra210 JC Kuo
2020-10-16 13:07 ` JC Kuo [this message]
2020-10-16 13:07 ` [PATCH v4 05/16] phy: tegra: xusb: Rearrange UPHY init on Tegra210 JC Kuo
2020-10-16 13:07 ` [PATCH v4 06/16] phy: tegra: xusb: Add Tegra210 lane_iddq operation JC Kuo
2020-10-16 13:07 ` [PATCH v4 07/16] phy: tegra: xusb: Add sleepwalk and suspend/resume JC Kuo
2020-10-16 13:07 ` [PATCH v4 08/16] soc/tegra: pmc: Provide USB sleepwalk register map JC Kuo
2020-10-16 13:07 ` [PATCH v4 09/16] arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop JC Kuo
2020-10-16 13:07 ` [PATCH v4 10/16] dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop JC Kuo
2020-10-19 21:40   ` Rob Herring
2020-10-28  9:18     ` JC Kuo
2020-11-13 16:20     ` Thierry Reding
2020-11-19  5:28       ` JC Kuo
2020-10-16 13:07 ` [PATCH v4 11/16] phy: tegra: xusb: Add wake/sleepwalk for Tegra210 JC Kuo
2020-10-16 13:07 ` [PATCH v4 12/16] phy: tegra: xusb: Tegra210 host mode VBUS control JC Kuo
2020-10-16 13:07 ` [PATCH v4 13/16] phy: tegra: xusb: Add wake/sleepwalk for Tegra186 JC Kuo
2020-10-16 13:07 ` [PATCH v4 14/16] arm64: tegra210/tegra186/tegra194: XUSB PADCTL irq JC Kuo
2020-10-16 13:07 ` [PATCH v4 15/16] usb: host: xhci-tegra: Unlink power domain devices JC Kuo
2020-10-16 13:07 ` [PATCH v4 16/16] xhci: tegra: Enable ELPG for runtime/system PM JC Kuo
2020-10-27  6:10   ` kernel test robot
2020-11-13 16:44 ` [PATCH v4 00/16] Tegra XHCI controller ELPG support Thierry Reding
2020-11-17  6:14   ` JC Kuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201016130726.1378666-5-jckuo@nvidia.com \
    --to=jckuo@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nkristam@nvidia.com \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Tegra Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-tegra/0 linux-tegra/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-tegra linux-tegra/ https://lore.kernel.org/linux-tegra \
		linux-tegra@vger.kernel.org
	public-inbox-index linux-tegra

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-tegra


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git