linux-tegra.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
	<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<nkristam@nvidia.com>, JC Kuo <jckuo@nvidia.com>,
	Thierry Reding <treding@nvidia.com>
Subject: [PATCH v4 05/16] phy: tegra: xusb: Rearrange UPHY init on Tegra210
Date: Fri, 16 Oct 2020 21:07:15 +0800	[thread overview]
Message-ID: <20201016130726.1378666-6-jckuo@nvidia.com> (raw)
In-Reply-To: <20201016130726.1378666-1-jckuo@nvidia.com>

This commit is a preparation for enabling XUSB SC7 support.
It rearranges Tegra210 XUSB PADCTL UPHY initialization sequence,
for the following reasons:

1. PLLE hardware power sequencer has to be enabled only after both
   PEX UPHY PLL and SATA UPHY PLL are initialized.
   tegra210_uphy_init() -> tegra210_pex_uphy_enable()
                        -> tegra210_sata_uphy_enable()
                        -> tegra210_plle_hw_sequence_start()
                        -> tegra210_aux_mux_lp0_clamp_disable()

2. At cold boot and SC7 exit, the following bits must be cleared after
   PEX/SATA lanes are out of IDDQ (IDDQ_DISABLE=1).
   a. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN,
   b. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN_EARLY
   c. XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN

   tegra210_pex_uphy_enable() and tegra210_sata_uphy_enable() are in
   charge of bringing lanes out of IDDQ, and then AUX_MUX_LP0_* bits
   will be cleared by tegra210_aux_mux_lp0_clamp_disable().

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
v4:                                                                                                                                                                                    
   no change
v3:
   make separate changes
   use "unsigned int" instead "int" type for PHY index
   add blank line for better readability

 drivers/phy/tegra/xusb-tegra210.c | 195 ++++++++++++++++--------------
 drivers/phy/tegra/xusb.h          |   4 +-
 2 files changed, 103 insertions(+), 96 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 9bfecdfecf35..faacb866cd1f 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -288,17 +288,19 @@ static int tegra210_pex_uphy_enable(struct tegra_xusb_padctl *padctl)
 	struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(padctl->pcie);
 	unsigned long timeout;
 	u32 value;
+	unsigned int i;
 	int err;
 
-	if (pcie->enable > 0) {
-		pcie->enable++;
+	if (pcie->enable)
 		return 0;
-	}
 
 	err = clk_prepare_enable(pcie->pll);
 	if (err < 0)
 		return err;
 
+	if (tegra210_plle_hw_sequence_is_enabled())
+		goto skip_pll_init;
+
 	err = reset_control_deassert(pcie->rst);
 	if (err < 0)
 		goto disable;
@@ -481,7 +483,14 @@ static int tegra210_pex_uphy_enable(struct tegra_xusb_padctl *padctl)
 
 	tegra210_xusb_pll_hw_sequence_start();
 
-	pcie->enable++;
+skip_pll_init:
+	pcie->enable = true;
+
+	for (i = 0; i < padctl->pcie->soc->num_lanes; i++) {
+		value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
+		value |= XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(i);
+		padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	}
 
 	return 0;
 
@@ -495,28 +504,44 @@ static int tegra210_pex_uphy_enable(struct tegra_xusb_padctl *padctl)
 static void tegra210_pex_uphy_disable(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_pcie_pad *pcie = to_pcie_pad(padctl->pcie);
+	u32 value;
+	unsigned int i;
 
-	if (WARN_ON(pcie->enable == 0))
+	if (WARN_ON(!pcie->enable))
 		return;
 
-	if (--pcie->enable > 0)
-		return;
+	pcie->enable = false;
+
+	for (i = 0; i < padctl->pcie->soc->num_lanes; i++) {
+		value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
+		value &= ~XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(i);
+		padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	}
 
 	clk_disable_unprepare(pcie->pll);
 }
 
 /* must be called under padctl->lock */
-static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl, bool usb)
+static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_sata_pad *sata = to_sata_pad(padctl->sata);
+	struct tegra_xusb_lane *lane = tegra_xusb_find_lane(padctl, "sata", 0);
 	unsigned long timeout;
 	u32 value;
+	unsigned int i;
 	int err;
+	bool usb;
 
-	if (sata->enable > 0) {
-		sata->enable++;
+	if (sata->enable)
 		return 0;
-	}
+
+	if (IS_ERR(lane))
+		return 0;
+
+	if (tegra210_plle_hw_sequence_is_enabled())
+		goto skip_pll_init;
+
+	usb = tegra_xusb_lane_check(lane, "usb3-ss");
 
 	err = clk_prepare_enable(sata->pll);
 	if (err < 0)
@@ -717,7 +742,14 @@ static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl, bool usb)
 
 	tegra210_sata_pll_hw_sequence_start();
 
-	sata->enable++;
+skip_pll_init:
+	sata->enable = true;
+
+	for (i = 0; i < padctl->sata->soc->num_lanes; i++) {
+		value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
+		value |= XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(i);
+		padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	}
 
 	return 0;
 
@@ -731,25 +763,27 @@ static int tegra210_sata_uphy_enable(struct tegra_xusb_padctl *padctl, bool usb)
 static void tegra210_sata_uphy_disable(struct tegra_xusb_padctl *padctl)
 {
 	struct tegra_xusb_sata_pad *sata = to_sata_pad(padctl->sata);
+	u32 value;
+	unsigned int i;
 
-	if (WARN_ON(sata->enable == 0))
+	if (WARN_ON(!sata->enable))
 		return;
 
-	if (--sata->enable > 0)
-		return;
+	sata->enable = false;
+
+	for (i = 0; i < padctl->sata->soc->num_lanes; i++) {
+		value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
+		value &= ~XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(i);
+		padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
+	}
 
 	clk_disable_unprepare(sata->pll);
 }
 
-static int tegra210_xusb_padctl_enable(struct tegra_xusb_padctl *padctl)
+static void tegra210_aux_mux_lp0_clamp_disable(struct tegra_xusb_padctl *padctl)
 {
 	u32 value;
 
-	mutex_lock(&padctl->lock);
-
-	if (padctl->enable++ > 0)
-		goto out;
-
 	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN;
 	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
@@ -765,24 +799,12 @@ static int tegra210_xusb_padctl_enable(struct tegra_xusb_padctl *padctl)
 	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 	value &= ~XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN;
 	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
-
-out:
-	mutex_unlock(&padctl->lock);
-	return 0;
 }
 
-static int tegra210_xusb_padctl_disable(struct tegra_xusb_padctl *padctl)
+static void tegra210_aux_mux_lp0_clamp_enable(struct tegra_xusb_padctl *padctl)
 {
 	u32 value;
 
-	mutex_lock(&padctl->lock);
-
-	if (WARN_ON(padctl->enable == 0))
-		goto out;
-
-	if (--padctl->enable > 0)
-		goto out;
-
 	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 	value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_VCORE_DOWN;
 	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
@@ -798,12 +820,38 @@ static int tegra210_xusb_padctl_disable(struct tegra_xusb_padctl *padctl)
 	value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 	value |= XUSB_PADCTL_ELPG_PROGRAM1_AUX_MUX_LP0_CLAMP_EN;
 	padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM1);
+}
+
+static int tegra210_uphy_init(struct tegra_xusb_padctl *padctl)
+{
+	if (padctl->pcie)
+		tegra210_pex_uphy_enable(padctl);
+
+	if (padctl->sata)
+		tegra210_sata_uphy_enable(padctl);
+
+	if (!tegra210_plle_hw_sequence_is_enabled())
+		tegra210_plle_hw_sequence_start();
+	else
+		dev_dbg(padctl->dev, "PLLE is already in HW control\n");
+
+	tegra210_aux_mux_lp0_clamp_disable(padctl);
 
-out:
-	mutex_unlock(&padctl->lock);
 	return 0;
 }
 
+static void __maybe_unused
+tegra210_uphy_deinit(struct tegra_xusb_padctl *padctl)
+{
+	tegra210_aux_mux_lp0_clamp_enable(padctl);
+
+	if (padctl->sata)
+		tegra210_sata_uphy_disable(padctl);
+
+	if (padctl->pcie)
+		tegra210_pex_uphy_disable(padctl);
+}
+
 static int tegra210_hsic_set_idle(struct tegra_xusb_padctl *padctl,
 				  unsigned int index, bool idle)
 {
@@ -940,14 +988,12 @@ static int tegra210_usb2_phy_init(struct phy *phy)
 		 XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
 
-	return tegra210_xusb_padctl_enable(padctl);
+	return 0;
 }
 
 static int tegra210_usb2_phy_exit(struct phy *phy)
 {
-	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
-
-	return tegra210_xusb_padctl_disable(lane->pad->padctl);
+	return 0;
 }
 
 static int tegra210_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
@@ -1405,14 +1451,12 @@ static int tegra210_hsic_phy_init(struct phy *phy)
 		 XUSB_PADCTL_USB2_PAD_MUX_HSIC_PAD_TRK_SHIFT;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
 
-	return tegra210_xusb_padctl_enable(padctl);
+	return 0;
 }
 
 static int tegra210_hsic_phy_exit(struct phy *phy)
 {
-	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
-
-	return tegra210_xusb_padctl_disable(lane->pad->padctl);
+	return 0;
 }
 
 static int tegra210_hsic_phy_power_on(struct phy *phy)
@@ -1776,38 +1820,28 @@ static const struct tegra_xusb_lane_ops tegra210_pcie_lane_ops = {
 static int tegra210_pcie_phy_init(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 
-	return tegra210_xusb_padctl_enable(lane->pad->padctl);
-}
+	mutex_lock(&padctl->lock);
 
-static int tegra210_pcie_phy_exit(struct phy *phy)
-{
-	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	tegra210_uphy_init(padctl);
 
-	return tegra210_xusb_padctl_disable(lane->pad->padctl);
+	mutex_unlock(&padctl->lock);
+
+	return 0;
 }
 
 static int tegra210_pcie_phy_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	u32 value;
-	int err;
+	int err = 0;
 
 	mutex_lock(&padctl->lock);
 
-	err = tegra210_pex_uphy_enable(padctl);
-	if (err < 0)
-		goto unlock;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
-	value |= XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->index);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
-
 	if (tegra_xusb_lane_check(lane, "usb3-ss"))
 		err = tegra210_usb3_phy_power_on(phy);
 
-unlock:
 	mutex_unlock(&padctl->lock);
 	return err;
 }
@@ -1817,16 +1851,9 @@ static int tegra210_pcie_phy_power_off(struct phy *phy)
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 	int err = 0;
-	u32 value;
 
 	mutex_lock(&padctl->lock);
 
-	value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
-	value &= ~XUSB_PADCTL_USB3_PAD_MUX_PCIE_IDDQ_DISABLE(lane->index);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
-
-	tegra210_pex_uphy_disable(padctl);
-
 	if (tegra_xusb_lane_check(lane, "usb3-ss"))
 		err = tegra210_usb3_phy_power_off(phy);
 
@@ -1836,7 +1863,6 @@ static int tegra210_pcie_phy_power_off(struct phy *phy)
 
 static const struct phy_ops tegra210_pcie_phy_ops = {
 	.init = tegra210_pcie_phy_init,
-	.exit = tegra210_pcie_phy_exit,
 	.power_on = tegra210_pcie_phy_power_on,
 	.power_off = tegra210_pcie_phy_power_off,
 	.owner = THIS_MODULE,
@@ -1957,38 +1983,27 @@ static const struct tegra_xusb_lane_ops tegra210_sata_lane_ops = {
 static int tegra210_sata_phy_init(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 
-	return tegra210_xusb_padctl_enable(lane->pad->padctl);
-}
+	mutex_lock(&padctl->lock);
 
-static int tegra210_sata_phy_exit(struct phy *phy)
-{
-	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	tegra210_uphy_init(padctl);
 
-	return tegra210_xusb_padctl_disable(lane->pad->padctl);
+	mutex_unlock(&padctl->lock);
+	return 0;
 }
 
 static int tegra210_sata_phy_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
-	u32 value;
-	int err;
+	int err = 0;
 
 	mutex_lock(&padctl->lock);
 
-	err = tegra210_sata_uphy_enable(padctl, false);
-	if (err < 0)
-		goto unlock;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
-	value |= XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(lane->index);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
-
 	if (tegra_xusb_lane_check(lane, "usb3-ss"))
 		err = tegra210_usb3_phy_power_on(phy);
 
-unlock:
 	mutex_unlock(&padctl->lock);
 	return err;
 }
@@ -1998,16 +2013,9 @@ static int tegra210_sata_phy_power_off(struct phy *phy)
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 	int err = 0;
-	u32 value;
 
 	mutex_lock(&padctl->lock);
 
-	value = padctl_readl(padctl, XUSB_PADCTL_USB3_PAD_MUX);
-	value &= ~XUSB_PADCTL_USB3_PAD_MUX_SATA_IDDQ_DISABLE(lane->index);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB3_PAD_MUX);
-
-	tegra210_sata_uphy_disable(lane->pad->padctl);
-
 	if (tegra_xusb_lane_check(lane, "usb3-ss"))
 		err = tegra210_usb3_phy_power_off(phy);
 
@@ -2017,7 +2025,6 @@ static int tegra210_sata_phy_power_off(struct phy *phy)
 
 static const struct phy_ops tegra210_sata_phy_ops = {
 	.init = tegra210_sata_phy_init,
-	.exit = tegra210_sata_phy_exit,
 	.power_on = tegra210_sata_phy_power_on,
 	.power_off = tegra210_sata_phy_power_off,
 	.owner = THIS_MODULE,
diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
index 37a5550a84ac..ccb5dc9b1220 100644
--- a/drivers/phy/tegra/xusb.h
+++ b/drivers/phy/tegra/xusb.h
@@ -232,7 +232,7 @@ struct tegra_xusb_pcie_pad {
 	struct reset_control *rst;
 	struct clk *pll;
 
-	unsigned int enable;
+	bool enable;
 };
 
 static inline struct tegra_xusb_pcie_pad *
@@ -247,7 +247,7 @@ struct tegra_xusb_sata_pad {
 	struct reset_control *rst;
 	struct clk *pll;
 
-	unsigned int enable;
+	bool enable;
 };
 
 static inline struct tegra_xusb_sata_pad *
-- 
2.25.1


  parent reply	other threads:[~2020-10-16 13:08 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-16 13:07 [PATCH v4 00/16] Tegra XHCI controller ELPG support JC Kuo
2020-10-16 13:07 ` [PATCH v4 01/16] clk: tegra: Add PLLE HW power sequencer control JC Kuo
2020-10-16 13:07 ` [PATCH v4 02/16] clk: tegra: Don't enable PLLE HW sequencer at init JC Kuo
2020-10-16 13:07 ` [PATCH v4 03/16] phy: tegra: xusb: Move usb3 port init for Tegra210 JC Kuo
2020-10-16 13:07 ` [PATCH v4 04/16] phy: tegra: xusb: tegra210: Do not reset UPHY PLL JC Kuo
2020-10-16 13:07 ` JC Kuo [this message]
2020-10-16 13:07 ` [PATCH v4 06/16] phy: tegra: xusb: Add Tegra210 lane_iddq operation JC Kuo
2020-10-16 13:07 ` [PATCH v4 07/16] phy: tegra: xusb: Add sleepwalk and suspend/resume JC Kuo
2020-10-16 13:07 ` [PATCH v4 08/16] soc/tegra: pmc: Provide USB sleepwalk register map JC Kuo
2020-10-16 13:07 ` [PATCH v4 09/16] arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop JC Kuo
2020-10-16 13:07 ` [PATCH v4 10/16] dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop JC Kuo
2020-10-19 21:40   ` Rob Herring
2020-10-28  9:18     ` JC Kuo
2020-11-13 16:20     ` Thierry Reding
2020-11-19  5:28       ` JC Kuo
2020-10-16 13:07 ` [PATCH v4 11/16] phy: tegra: xusb: Add wake/sleepwalk for Tegra210 JC Kuo
2020-10-16 13:07 ` [PATCH v4 12/16] phy: tegra: xusb: Tegra210 host mode VBUS control JC Kuo
2020-10-16 13:07 ` [PATCH v4 13/16] phy: tegra: xusb: Add wake/sleepwalk for Tegra186 JC Kuo
2020-10-16 13:07 ` [PATCH v4 14/16] arm64: tegra210/tegra186/tegra194: XUSB PADCTL irq JC Kuo
2020-10-16 13:07 ` [PATCH v4 15/16] usb: host: xhci-tegra: Unlink power domain devices JC Kuo
2020-10-16 13:07 ` [PATCH v4 16/16] xhci: tegra: Enable ELPG for runtime/system PM JC Kuo
2020-10-27  6:10   ` kernel test robot
2020-11-13 16:44 ` [PATCH v4 00/16] Tegra XHCI controller ELPG support Thierry Reding
2020-11-17  6:14   ` JC Kuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201016130726.1378666-6-jckuo@nvidia.com \
    --to=jckuo@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nkristam@nvidia.com \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).