linux-tegra.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/16] Tegra XHCI controller ELPG support
@ 2020-10-16 13:07 JC Kuo
  2020-10-16 13:07 ` [PATCH v4 01/16] clk: tegra: Add PLLE HW power sequencer control JC Kuo
                   ` (16 more replies)
  0 siblings, 17 replies; 24+ messages in thread
From: JC Kuo @ 2020-10-16 13:07 UTC (permalink / raw)
  To: gregkh, thierry.reding, robh, jonathanh, kishon
  Cc: linux-tegra, linux-usb, linux-kernel, devicetree, nkristam, JC Kuo

Tegra XHCI controler can be placed in ELPG (Engine Level PowerGated)
state for power saving when all of the connected USB devices are in
suspended state. This patch series includes clk, phy and pmc changes
that are required for properly place controller in ELPG and bring
controller out of ELPG.

JC Kuo (16):
  clk: tegra: Add PLLE HW power sequencer control
  clk: tegra: Don't enable PLLE HW sequencer at init
  phy: tegra: xusb: Move usb3 port init for Tegra210
  phy: tegra: xusb: tegra210: Do not reset UPHY PLL
  phy: tegra: xusb: Rearrange UPHY init on Tegra210
  phy: tegra: xusb: Add Tegra210 lane_iddq operation
  phy: tegra: xusb: Add sleepwalk and suspend/resume
  soc/tegra: pmc: Provide USB sleepwalk register map
  arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop
  dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop
  phy: tegra: xusb: Add wake/sleepwalk for Tegra210
  phy: tegra: xusb: Tegra210 host mode VBUS control
  phy: tegra: xusb: Add wake/sleepwalk for Tegra186
  arm64: tegra210/tegra186/tegra194: XUSB PADCTL irq
  usb: host: xhci-tegra: Unlink power domain devices
  xhci: tegra: Enable ELPG for runtime/system PM

 .../phy/nvidia,tegra124-xusb-padctl.txt       |    1 +
 arch/arm64/boot/dts/nvidia/tegra186.dtsi      |    1 +
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      |    1 +
 arch/arm64/boot/dts/nvidia/tegra210.dtsi      |    2 +
 drivers/clk/tegra/clk-pll.c                   |   12 -
 drivers/clk/tegra/clk-tegra210.c              |   53 +-
 drivers/phy/tegra/xusb-tegra186.c             |  558 ++++-
 drivers/phy/tegra/xusb-tegra210.c             | 1889 +++++++++++++----
 drivers/phy/tegra/xusb.c                      |   92 +-
 drivers/phy/tegra/xusb.h                      |   22 +-
 drivers/soc/tegra/pmc.c                       |   94 +
 drivers/usb/host/xhci-tegra.c                 |  610 ++++--
 include/linux/clk/tegra.h                     |    4 +-
 include/linux/phy/tegra/xusb.h                |   10 +-
 14 files changed, 2785 insertions(+), 564 deletions(-)

-- 
2.25.1


^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2020-11-19  5:29 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-16 13:07 [PATCH v4 00/16] Tegra XHCI controller ELPG support JC Kuo
2020-10-16 13:07 ` [PATCH v4 01/16] clk: tegra: Add PLLE HW power sequencer control JC Kuo
2020-10-16 13:07 ` [PATCH v4 02/16] clk: tegra: Don't enable PLLE HW sequencer at init JC Kuo
2020-10-16 13:07 ` [PATCH v4 03/16] phy: tegra: xusb: Move usb3 port init for Tegra210 JC Kuo
2020-10-16 13:07 ` [PATCH v4 04/16] phy: tegra: xusb: tegra210: Do not reset UPHY PLL JC Kuo
2020-10-16 13:07 ` [PATCH v4 05/16] phy: tegra: xusb: Rearrange UPHY init on Tegra210 JC Kuo
2020-10-16 13:07 ` [PATCH v4 06/16] phy: tegra: xusb: Add Tegra210 lane_iddq operation JC Kuo
2020-10-16 13:07 ` [PATCH v4 07/16] phy: tegra: xusb: Add sleepwalk and suspend/resume JC Kuo
2020-10-16 13:07 ` [PATCH v4 08/16] soc/tegra: pmc: Provide USB sleepwalk register map JC Kuo
2020-10-16 13:07 ` [PATCH v4 09/16] arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop JC Kuo
2020-10-16 13:07 ` [PATCH v4 10/16] dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop JC Kuo
2020-10-19 21:40   ` Rob Herring
2020-10-28  9:18     ` JC Kuo
2020-11-13 16:20     ` Thierry Reding
2020-11-19  5:28       ` JC Kuo
2020-10-16 13:07 ` [PATCH v4 11/16] phy: tegra: xusb: Add wake/sleepwalk for Tegra210 JC Kuo
2020-10-16 13:07 ` [PATCH v4 12/16] phy: tegra: xusb: Tegra210 host mode VBUS control JC Kuo
2020-10-16 13:07 ` [PATCH v4 13/16] phy: tegra: xusb: Add wake/sleepwalk for Tegra186 JC Kuo
2020-10-16 13:07 ` [PATCH v4 14/16] arm64: tegra210/tegra186/tegra194: XUSB PADCTL irq JC Kuo
2020-10-16 13:07 ` [PATCH v4 15/16] usb: host: xhci-tegra: Unlink power domain devices JC Kuo
2020-10-16 13:07 ` [PATCH v4 16/16] xhci: tegra: Enable ELPG for runtime/system PM JC Kuo
2020-10-27  6:10   ` kernel test robot
2020-11-13 16:44 ` [PATCH v4 00/16] Tegra XHCI controller ELPG support Thierry Reding
2020-11-17  6:14   ` JC Kuo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).