linux-tegra.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Sowjanya Komatineni <skomatineni@nvidia.com>,
	ulf.hansson@linaro.org, thierry.reding@gmail.com,
	jonathanh@nvidia.com, robh+dt@kernel.org
Cc: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org
Subject: Re: [PATCH v2 6/6] sdhci: tegra: Add missing TMCLK for data timeout
Date: Wed, 5 Aug 2020 11:06:30 +0300	[thread overview]
Message-ID: <d131fc8c-fa1f-cb67-fe6a-955d3582d1d6@intel.com> (raw)
In-Reply-To: <1596515363-27235-7-git-send-email-skomatineni@nvidia.com>

On 4/08/20 7:29 am, Sowjanya Komatineni wrote:
> commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support")

So that could be a Fixes tag also?

> 
> Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra
> SDMMC hawdware for data timeout to achive better timeout than using
> SDCLK and using TMCLK is recommended.
> 
> USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register
> SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or
> SDCLK for data timeout.
> 
> Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used
> for data timeout by Tegra SDMMC hardware and having TMCLK not enabled
> is not recommended.
> 
> So, this patch fixes it.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci-tegra.c | 41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
> index 31ed321..c0b9405 100644
> --- a/drivers/mmc/host/sdhci-tegra.c
> +++ b/drivers/mmc/host/sdhci-tegra.c
> @@ -140,6 +140,7 @@ struct sdhci_tegra_autocal_offsets {
>  struct sdhci_tegra {
>  	const struct sdhci_tegra_soc_data *soc_data;
>  	struct gpio_desc *power_gpio;
> +	struct clk *tmclk;
>  	bool ddr_signaling;
>  	bool pad_calib_required;
>  	bool pad_control_available;
> @@ -1611,6 +1612,44 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
>  		goto err_power_req;
>  	}
>  
> +	/*
> +	 * Tegra210 has a separate SDMMC_LEGACY_TM clock used for host
> +	 * timeout clock and SW can choose TMCLK or SDCLK for hardware
> +	 * data timeout through the bit USE_TMCLK_FOR_DATA_TIMEOUT of
> +	 * the register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL.
> +	 *
> +	 * USE_TMCLK_FOR_DATA_TIMEOUT bit default is set to 1 and SDMMC uses
> +	 * 12Mhz TMCLK which is advertised in host capability register.
> +	 * With TMCLK of 12Mhz provides maximum data timeout period that can
> +	 * be achieved is 11s better than using SDCLK for data timeout.
> +	 *
> +	 * So, TMCLK is set to 12Mhz and kept enabled all the time on SoC's
> +	 * supporting SDR104 mode and when not using SDCLK for data timeout.
> +	 */
> +
> +	if ((soc_data->nvquirks & NVQUIRK_ENABLE_SDR104) &&
> +	    !(soc_data->pdata->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
> +		clk = devm_clk_get(&pdev->dev, "tmclk");
> +		if (IS_ERR(clk)) {
> +			rc = PTR_ERR(clk);
> +			if (rc == -EPROBE_DEFER)
> +				goto err_power_req;
> +
> +			dev_warn(&pdev->dev, "failed to get tmclk: %d\n", rc);
> +			clk = NULL;
> +		}
> +
> +		clk_set_rate(clk, 12000000);
> +		rc = clk_prepare_enable(clk);
> +		if (rc) {
> +			dev_err(&pdev->dev,
> +				"failed to enable tmclk: %d\n", rc);
> +			goto err_power_req;
> +		}
> +
> +		tegra_host->tmclk = clk;
> +	}
> +
>  	clk = devm_clk_get(mmc_dev(host->mmc), NULL);
>  	if (IS_ERR(clk)) {
>  		rc = PTR_ERR(clk);
> @@ -1654,6 +1693,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
>  err_rst_get:
>  	clk_disable_unprepare(pltfm_host->clk);
>  err_clk_get:
> +	clk_disable_unprepare(tegra_host->tmclk);
>  err_power_req:
>  err_parse_dt:
>  	sdhci_pltfm_free(pdev);
> @@ -1671,6 +1711,7 @@ static int sdhci_tegra_remove(struct platform_device *pdev)
>  	reset_control_assert(tegra_host->rst);
>  	usleep_range(2000, 4000);
>  	clk_disable_unprepare(pltfm_host->clk);
> +	clk_disable_unprepare(tegra_host->tmclk);
>  
>  	sdhci_pltfm_free(pdev);
>  
> 


  reply	other threads:[~2020-08-05  8:07 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-04  4:29 [PATCH v2 0/6] Fix timeout clock used by hardware data timeout Sowjanya Komatineni
2020-08-04  4:29 ` [PATCH v2 1/6] sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra210 Sowjanya Komatineni
2020-08-05  7:48   ` Adrian Hunter
2020-08-04  4:29 ` [PATCH v2 2/6] sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra186 Sowjanya Komatineni
2020-08-05  7:52   ` Adrian Hunter
2020-08-04  4:29 ` [PATCH v2 3/6] arm64: tegra: Add missing timeout clock to Tegra210 SDMMC Sowjanya Komatineni
2020-08-04  4:29 ` [PATCH v2 4/6] arm64: tegra: Add missing timeout clock to Tegra186 SDMMC nodes Sowjanya Komatineni
2020-08-04  4:29 ` [PATCH v2 5/6] arm64: tegra: Add missing timeout clock to Tegra194 " Sowjanya Komatineni
2020-08-04  4:29 ` [PATCH v2 6/6] sdhci: tegra: Add missing TMCLK for data timeout Sowjanya Komatineni
2020-08-05  8:06   ` Adrian Hunter [this message]
2020-08-06  0:07     ` Sowjanya Komatineni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d131fc8c-fa1f-cb67-fe6a-955d3582d1d6@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=skomatineni@nvidia.com \
    --cc=thierry.reding@gmail.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).