Linux-Trace-Devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/3] KernelShark build fixes for v1.0
@ 2019-06-14 13:26 Yordan Karadzhov
  2019-06-14 13:26 ` [PATCH v2 1/3] kernel-shark: Remove the "-g" compiler flag Yordan Karadzhov
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Yordan Karadzhov @ 2019-06-14 13:26 UTC (permalink / raw)
  To: rostedt; +Cc: linux-trace-devel, y.karadz, troyengel, Yordan Karadzhov

Patches addressing the problem of having the paths to the build
directory embedded in the final binaries. The problem was reported
by Troy Engel.

Changes in v2:
 - In FindTraceCmd.cmake : discovering the trace-cmd executable is now
 a compulsory requirement.
 - A new buld type called "Package" has been defined.

Yordan Karadzhov (3):
  kernel-shark: Remove the "-g" compiler flag.
  kernel-shark: Avoid TRACECMD_BIN_DIR being set to the build path
  kernel-shark: Define a CMAKE_BUILD_TYPE "Package"

 kernel-shark/CMakeLists.txt           | 45 ++++++++++++++++++---------
 kernel-shark/README                   | 22 +++++++++----
 kernel-shark/build/FindTraceCmd.cmake | 18 ++++++-----
 kernel-shark/build/deff.h.cmake       |  2 +-
 kernel-shark/src/KsCaptureDialog.cpp  |  7 ++---
 5 files changed, 61 insertions(+), 33 deletions(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 1/3] kernel-shark: Remove the "-g" compiler flag.
  2019-06-14 13:26 [PATCH v2 0/3] KernelShark build fixes for v1.0 Yordan Karadzhov
@ 2019-06-14 13:26 ` Yordan Karadzhov
  2019-06-14 13:26 ` [PATCH v2 2/3] kernel-shark: Avoid TRACECMD_BIN_DIR being set to the build path Yordan Karadzhov
  2019-06-14 13:26 ` [PATCH v2 3/3] kernel-shark: Define a CMAKE_BUILD_TYPE "Package" Yordan Karadzhov
  2 siblings, 0 replies; 6+ messages in thread
From: Yordan Karadzhov @ 2019-06-14 13:26 UTC (permalink / raw)
  To: rostedt; +Cc: linux-trace-devel, y.karadz, troyengel, Yordan Karadzhov

The debug flags by design embed the build paths, but the distro package
binaries should not have such paths embedded in them.

Suggested-by: Troy Engel <troyengel@gmail.com>
Signed-off-by: Yordan Karadzhov <ykaradzhov@vmware.com>
---
 kernel-shark/CMakeLists.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel-shark/CMakeLists.txt b/kernel-shark/CMakeLists.txt
index d45be20..87f33d6 100644
--- a/kernel-shark/CMakeLists.txt
+++ b/kernel-shark/CMakeLists.txt
@@ -33,8 +33,8 @@ endif (Qt5Widgets_FOUND)
 set(LIBRARY_OUTPUT_PATH    "${KS_DIR}/lib")
 set(EXECUTABLE_OUTPUT_PATH "${KS_DIR}/bin")
 
-set(CMAKE_C_FLAGS   "${CMAKE_C_FLAGS} -Wall -g -pthread -fPIC")
-set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -g -std=c++11 -pthread -fPIC")
+set(CMAKE_C_FLAGS   "${CMAKE_C_FLAGS} -Wall -pthread -fPIC")
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -std=c++11 -pthread -fPIC")
 
 if(NOT _INSTALL_PREFIX)
 	set(_INSTALL_PREFIX "/usr/local")
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 2/3] kernel-shark: Avoid TRACECMD_BIN_DIR being set to the build path
  2019-06-14 13:26 [PATCH v2 0/3] KernelShark build fixes for v1.0 Yordan Karadzhov
  2019-06-14 13:26 ` [PATCH v2 1/3] kernel-shark: Remove the "-g" compiler flag Yordan Karadzhov
@ 2019-06-14 13:26 ` Yordan Karadzhov
  2019-06-14 13:26 ` [PATCH v2 3/3] kernel-shark: Define a CMAKE_BUILD_TYPE "Package" Yordan Karadzhov
  2 siblings, 0 replies; 6+ messages in thread
From: Yordan Karadzhov @ 2019-06-14 13:26 UTC (permalink / raw)
  To: rostedt; +Cc: linux-trace-devel, y.karadz, troyengel, Yordan Karadzhov

The full path to the build directory (which is random for every user)
is embedded in the final binary. This is a no-no for some Linux distros
which are requiring that the finished binaries should not have such paths
embedded in them.

Reported-by: Troy Engel <troyengel@gmail.com>
Signed-off-by: Yordan Karadzhov <ykaradzhov@vmware.com>
---
 kernel-shark/build/FindTraceCmd.cmake | 18 +++++++++++-------
 kernel-shark/build/deff.h.cmake       |  2 +-
 kernel-shark/src/KsCaptureDialog.cpp  |  7 +++----
 3 files changed, 15 insertions(+), 12 deletions(-)

diff --git a/kernel-shark/build/FindTraceCmd.cmake b/kernel-shark/build/FindTraceCmd.cmake
index 8c51f11..2da4eee 100644
--- a/kernel-shark/build/FindTraceCmd.cmake
+++ b/kernel-shark/build/FindTraceCmd.cmake
@@ -12,10 +12,14 @@
 # MESSAGE(" Looking for trace-cmd ...")
 
 # First search in the user provided paths.
-find_path(TRACECMD_BIN_DIR      NAMES  trace-cmd
-                                PATHS  $ENV{TRACE_CMD}/tracecmd/
-                                       ${CMAKE_SOURCE_DIR}/../tracecmd/
-                                NO_DEFAULT_PATH)
+if (CMAKE_BUILD_TYPE MATCHES Debug)
+
+  find_program(TRACECMD_EXECUTABLE   NAMES  trace-cmd
+                                     PATHS  $ENV{TRACE_CMD}/tracecmd/
+                                            ${CMAKE_SOURCE_DIR}/../tracecmd/
+                                     NO_DEFAULT_PATH)
+
+endif (CMAKE_BUILD_TYPE MATCHES Debug)
 
 find_path(TRACECMD_INCLUDE_DIR  NAMES  trace-cmd/trace-cmd.h
                                 PATHS  $ENV{TRACE_CMD}/include/
@@ -34,16 +38,16 @@ find_library(TRACEEVENT_LIBRARY NAMES  traceevent/libtraceevent.a
 
 # If not found, search in the default system paths. Note that if the previous
 # search was successful "find_path" will do nothing this time.
-find_path(TRACECMD_BIN_DIR      NAMES  trace-cmd)
+find_program(TRACECMD_EXECUTABLE   NAMES  trace-cmd)
 find_path(TRACECMD_INCLUDE_DIR  NAMES  trace-cmd/trace-cmd.h)
 find_library(TRACECMD_LIBRARY   NAMES  trace-cmd/libtracecmd.so)
 find_library(TRACEEVENT_LIBRARY NAMES  traceevent/libtraceevent.so)
 
-IF (TRACECMD_INCLUDE_DIR AND TRACECMD_LIBRARY)
+IF (TRACECMD_INCLUDE_DIR AND TRACECMD_LIBRARY AND TRACECMD_EXECUTABLE)
 
   SET(TRACECMD_FOUND TRUE)
 
-ENDIF (TRACECMD_INCLUDE_DIR AND TRACECMD_LIBRARY)
+ENDIF (TRACECMD_INCLUDE_DIR AND TRACECMD_LIBRARY AND TRACECMD_EXECUTABLE)
 
 IF (TRACECMD_FOUND)
 
diff --git a/kernel-shark/build/deff.h.cmake b/kernel-shark/build/deff.h.cmake
index efee2a1..79726ff 100644
--- a/kernel-shark/build/deff.h.cmake
+++ b/kernel-shark/build/deff.h.cmake
@@ -18,7 +18,7 @@
 #cmakedefine KS_PLUGIN_INSTALL_PREFIX "@KS_PLUGIN_INSTALL_PREFIX@"
 
 /** Location of the trace-cmd executable. */
-#cmakedefine TRACECMD_BIN_DIR "@TRACECMD_BIN_DIR@"
+#cmakedefine TRACECMD_EXECUTABLE "@TRACECMD_EXECUTABLE@"
 
 /** "pkexec" executable. */
 #cmakedefine DO_AS_ROOT "@DO_AS_ROOT@"
diff --git a/kernel-shark/src/KsCaptureDialog.cpp b/kernel-shark/src/KsCaptureDialog.cpp
index b107595..7f8cf64 100644
--- a/kernel-shark/src/KsCaptureDialog.cpp
+++ b/kernel-shark/src/KsCaptureDialog.cpp
@@ -489,12 +489,11 @@ KsCaptureDialog::KsCaptureDialog(QWidget *parent)
 	connect(&_captureCtrl._closeButton,	&QPushButton::pressed,
 		this,				&KsCaptureDialog::close);
 
-	if (KsUtils::isInstalled())
-		captureExe = QString(_INSTALL_PREFIX) + QString("/bin");
+	if (!KsUtils::isInstalled())
+		captureExe = QString(_INSTALL_PREFIX) + QString("/bin/trace-cmd");
 	else
-		captureExe = TRACECMD_BIN_DIR;
+		captureExe = TRACECMD_EXECUTABLE;
 
-	captureExe += "/trace-cmd";
 	_captureProc.setProgram(captureExe);
 
 	_captureMon.connectMe(&_captureProc, &_captureCtrl);
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v2 3/3] kernel-shark: Define a CMAKE_BUILD_TYPE "Package"
  2019-06-14 13:26 [PATCH v2 0/3] KernelShark build fixes for v1.0 Yordan Karadzhov
  2019-06-14 13:26 ` [PATCH v2 1/3] kernel-shark: Remove the "-g" compiler flag Yordan Karadzhov
  2019-06-14 13:26 ` [PATCH v2 2/3] kernel-shark: Avoid TRACECMD_BIN_DIR being set to the build path Yordan Karadzhov
@ 2019-06-14 13:26 ` Yordan Karadzhov
  2019-07-05 23:34   ` Steven Rostedt
  2 siblings, 1 reply; 6+ messages in thread
From: Yordan Karadzhov @ 2019-06-14 13:26 UTC (permalink / raw)
  To: rostedt; +Cc: linux-trace-devel, y.karadz, troyengel, Yordan Karadzhov

A special build type dedicated for package maintainers is added.
By default this build type adds the "-O2" compiler flag. Users
can chose their own compiler flags by providing the corresponding
CMAKE_XXXX_FLAGS_PACKAGE Command-Line options.

If no type is specified, the build type will be "Debug".

Signed-off-by: Yordan Karadzhov <ykaradzhov@vmware.com>
---
 kernel-shark/CMakeLists.txt | 41 +++++++++++++++++++++++++------------
 kernel-shark/README         | 22 ++++++++++++++------
 2 files changed, 44 insertions(+), 19 deletions(-)

diff --git a/kernel-shark/CMakeLists.txt b/kernel-shark/CMakeLists.txt
index 87f33d6..4b58b9b 100644
--- a/kernel-shark/CMakeLists.txt
+++ b/kernel-shark/CMakeLists.txt
@@ -36,9 +36,34 @@ set(EXECUTABLE_OUTPUT_PATH "${KS_DIR}/bin")
 set(CMAKE_C_FLAGS   "${CMAKE_C_FLAGS} -Wall -pthread -fPIC")
 set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -std=c++11 -pthread -fPIC")
 
-if(NOT _INSTALL_PREFIX)
-	set(_INSTALL_PREFIX "/usr/local")
-endif()
+if (NOT CMAKE_BUILD_TYPE)
+    set(CMAKE_BUILD_TYPE Debug)
+endif (NOT CMAKE_BUILD_TYPE)
+
+message("\n Build type: ${CMAKE_BUILD_TYPE}")
+
+if (NOT CMAKE_C_FLAGS_PACKAGE)
+    set(CMAKE_C_FLAGS_PACKAGE "-O3")
+endif (NOT CMAKE_C_FLAGS_PACKAGE)
+
+if (NOT CMAKE_CXX_FLAGS_PACKAGE)
+    set(CMAKE_CXX_FLAGS_PACKAGE "-O3")
+endif (NOT CMAKE_CXX_FLAGS_PACKAGE)
+
+if (NOT _INSTALL_PREFIX)
+    set(_INSTALL_PREFIX "/usr/local")
+endif (NOT _INSTALL_PREFIX)
+
+if (CMAKE_BUILD_TYPE MATCHES Package)
+
+    set(CMAKE_INSTALL_RPATH "${_INSTALL_PREFIX}/lib/${KS_APP_NAME}/")
+    set(CMAKE_BUILD_WITH_INSTALL_RPATH TRUE)
+
+else (CMAKE_BUILD_TYPE MATCHES Package)
+
+    set(CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
+
+endif (CMAKE_BUILD_TYPE MATCHES Package)
 
 set(KS_PLUGIN_INSTALL_PREFIX ${_INSTALL_PREFIX}/lib/${KS_APP_NAME}/plugins/)
 
@@ -47,16 +72,6 @@ set(KS_ICON_FIN    KS_icon_fin.svg)
 set(KS_LOGO        KS_logo_symbol.svg)
 set(KS_LOGO_LABEL  KS_logo_horizontal.svg)
 
-if (NOT _DEBUG)
-
-	set(CMAKE_C_FLAGS   "${CMAKE_C_FLAGS} -O2")
-	set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -O2")
-
-endif (NOT _DEBUG)
-
-SET(CMAKE_INSTALL_RPATH "${_INSTALL_PREFIX}/lib/${KS_APP_NAME}/")
-SET(CMAKE_BUILD_WITH_INSTALL_RPATH FALSE)
-
 include_directories(${KS_DIR}/src/
                     ${KS_DIR}/build/src/
                     ${JSONC_INCLUDE_DIR}
diff --git a/kernel-shark/README b/kernel-shark/README
index 379c390..75a0dd0 100644
--- a/kernel-shark/README
+++ b/kernel-shark/README
@@ -38,14 +38,24 @@ the original trace-cmd end traceevent libraries.
 2.1.1 In order to create a Doxygen documentation add -D_DOXYGEN_DOC=1
 as a CMake Command-Line option.
 
-2.1.2 In order to generates complete debug information to be used by GDB add
--D_DEBUG=1 as a CMake Command-Line option.
-
-2.1.3 By default, installation prefix is "/usr/local". It can be changed using
+2.1.2 By default, installation prefix is "/usr/local". It can be changed using
 -D_INSTALL_PREFIX= as a CMake Command-Line option.
 
-Example:
-    cmake -D_DOXYGEN_DOC=1 -D_DEBUG=1 -D_INSTALL_PREFIX=/usr ../
+2.1.3 In addition to the standard CMake build types (Debug, Release,
+RelWithDebInfo, MinSizeRel) KernelShark supports a "Package" build type.
+By default this build type adds the "-O2" compiler flag. Package maintainers
+can chose their own compiler flags by providing the corresponding
+CMAKE_XXXX_FLAGS_PACKAGE Command-Line options (see the example below).
+
+Note that when built as a "Package" the RPATH-s of the executables are
+set directly to _INSTALL_PREFIX/lib/kernelshark/
+
+If no build types is specified, the type will be "Debug".
+
+Examples:
+    cmake -D_DOXYGEN_DOC=1 -D_INSTALL_PREFIX=/usr ../
+
+    cmake -DCMAKE_BUILD_TYPE=Package -DCMAKE_C_FLAGS_PACKAGE="-O3 -pedantic"  ../
 
 2.2.1 Use "make clean" if you want to delete all already compiled objects.
 
-- 
2.20.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 3/3] kernel-shark: Define a CMAKE_BUILD_TYPE "Package"
  2019-06-14 13:26 ` [PATCH v2 3/3] kernel-shark: Define a CMAKE_BUILD_TYPE "Package" Yordan Karadzhov
@ 2019-07-05 23:34   ` Steven Rostedt
  2019-07-08  9:16     ` Yordan Karadzhov (VMware)
  0 siblings, 1 reply; 6+ messages in thread
From: Steven Rostedt @ 2019-07-05 23:34 UTC (permalink / raw)
  To: Yordan Karadzhov; +Cc: linux-trace-devel, y.karadz, troyengel

On Fri, 14 Jun 2019 13:26:59 +0000
Yordan Karadzhov <ykaradzhov@vmware.com> wrote:

> A special build type dedicated for package maintainers is added.
> By default this build type adds the "-O2" compiler flag. Users
> can chose their own compiler flags by providing the corresponding
> CMAKE_XXXX_FLAGS_PACKAGE Command-Line options.
> 
> If no type is specified, the build type will be "Debug".
> 
> Signed-off-by: Yordan Karadzhov <ykaradzhov@vmware.com>

Hmm, after applying this commit, I get this:

 <trace-cmd.git># make install_gui
 <trace-cmd.git># cd
 <~/># kernelshark
kernelshark: error while loading shared libraries: libkshark-gui.so.0.9.8: cannot open shared object file: No such file or directory

-- Steve

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH v2 3/3] kernel-shark: Define a CMAKE_BUILD_TYPE "Package"
  2019-07-05 23:34   ` Steven Rostedt
@ 2019-07-08  9:16     ` Yordan Karadzhov (VMware)
  0 siblings, 0 replies; 6+ messages in thread
From: Yordan Karadzhov (VMware) @ 2019-07-08  9:16 UTC (permalink / raw)
  To: Steven Rostedt, Yordan Karadzhov; +Cc: linux-trace-devel, troyengel



On 6.07.19 г. 2:34 ч., Steven Rostedt wrote:
> On Fri, 14 Jun 2019 13:26:59 +0000
> Yordan Karadzhov <ykaradzhov@vmware.com> wrote:
> 
>> A special build type dedicated for package maintainers is added.
>> By default this build type adds the "-O2" compiler flag. Users
>> can chose their own compiler flags by providing the corresponding
>> CMAKE_XXXX_FLAGS_PACKAGE Command-Line options.
>>
>> If no type is specified, the build type will be "Debug".
>>
>> Signed-off-by: Yordan Karadzhov <ykaradzhov@vmware.com>
> 
> Hmm, after applying this commit, I get this:
> 
>   <trace-cmd.git># make install_gui
>   <trace-cmd.git># cd
>   <~/># kernelshark
> kernelshark: error while loading shared libraries: libkshark-gui.so.0.9.8: cannot open shared object file: No such file or directory
> 

Thanks!
I see my mistake. Is turns that we need to set CMAKE_INSTALL_RPATH 
regardless of the choice to build with or without RPATH. This is not 
made clear in the CMake documentation. So the line

set(CMAKE_INSTALL_RPATH "${_INSTALL_PREFIX}/lib/${KS_APP_NAME}/")

has to go outside of the IF. I will send new version of the patch.

Yordan


> -- Steve
> 

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, back to index

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-14 13:26 [PATCH v2 0/3] KernelShark build fixes for v1.0 Yordan Karadzhov
2019-06-14 13:26 ` [PATCH v2 1/3] kernel-shark: Remove the "-g" compiler flag Yordan Karadzhov
2019-06-14 13:26 ` [PATCH v2 2/3] kernel-shark: Avoid TRACECMD_BIN_DIR being set to the build path Yordan Karadzhov
2019-06-14 13:26 ` [PATCH v2 3/3] kernel-shark: Define a CMAKE_BUILD_TYPE "Package" Yordan Karadzhov
2019-07-05 23:34   ` Steven Rostedt
2019-07-08  9:16     ` Yordan Karadzhov (VMware)

Linux-Trace-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-trace-devel/0 linux-trace-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-trace-devel linux-trace-devel/ https://lore.kernel.org/linux-trace-devel \
		linux-trace-devel@vger.kernel.org linux-trace-devel@archiver.kernel.org
	public-inbox-index linux-trace-devel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-trace-devel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox