linux-trace-devel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/4] Upgrade the OpenGL wrapper for KernelShark v2.0
@ 2020-11-20  9:50 Yordan Karadzhov (VMware)
  2020-11-20  9:50 ` [PATCH 1/4] kernel-shark: Add support for drawing text Yordan Karadzhov (VMware)
                   ` (3 more replies)
  0 siblings, 4 replies; 9+ messages in thread
From: Yordan Karadzhov (VMware) @ 2020-11-20  9:50 UTC (permalink / raw)
  To: rostedt; +Cc: linux-trace-devel, Yordan Karadzhov (VMware)

This patch-sets contains one major improvement to the OpenGL wrapping
interface used by KernelShark, that is the capability to draw text to
the OpenGL canvas. In the same patch-sets we do few other independent
small improvements and optimizations.

Steven,
Please review carefully the first patch. Check the new code in
src/libkshark-plot.c, but also think if the addition of the public
domain header file stb_truetype.h can bring some licensing issues.
Also, is the reference to the original project good enough?


Yordan Karadzhov (VMware) (4):
  kernel-shark: Add support for drawing text
  kernel-shark: Make GLUT optional dependency
  kernel-shark: Add ksplot_draw_polyline()
  kernel-shark: Optimize ksplot_draw_polygon()

 CMakeLists.txt                   |    6 +-
 Documentation/doxygen/dox_config |    1 +
 build/deff.h.cmake               |    3 +
 src/CMakeLists.txt               |    8 +-
 src/libkshark-plot.c             |  305 +-
 src/libkshark-plot.h             |   73 +
 src/stb_truetype.h               | 5011 ++++++++++++++++++++++++++++++
 7 files changed, 5366 insertions(+), 41 deletions(-)
 create mode 100644 src/stb_truetype.h

-- 
2.25.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 1/4] kernel-shark: Add support for drawing text
  2020-11-20  9:50 [PATCH 0/4] Upgrade the OpenGL wrapper for KernelShark v2.0 Yordan Karadzhov (VMware)
@ 2020-11-20  9:50 ` Yordan Karadzhov (VMware)
  2020-12-04 23:31   ` Steven Rostedt
  2020-11-20  9:50 ` [PATCH 2/4] kernel-shark: Make GLUT optional dependency Yordan Karadzhov (VMware)
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 9+ messages in thread
From: Yordan Karadzhov (VMware) @ 2020-11-20  9:50 UTC (permalink / raw)
  To: rostedt; +Cc: linux-trace-devel, Yordan Karadzhov (VMware)

OpenGL doesn't provide support for text rendering. Here we first
re-enable the compilation of the OpenGL wrapper and add the capability
of printing text to the OpenGL scene by using the single-file public
domain library "stb_truetype":
https://github.com/nothings/stb/blob/master/stb_truetype.h

Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
---
 CMakeLists.txt                   |    6 +-
 Documentation/doxygen/dox_config |    1 +
 src/CMakeLists.txt               |    4 +-
 src/libkshark-plot.c             |  244 +-
 src/libkshark-plot.h             |   57 +
 src/stb_truetype.h               | 5011 ++++++++++++++++++++++++++++++
 6 files changed, 5312 insertions(+), 11 deletions(-)
 create mode 100644 src/stb_truetype.h

diff --git a/CMakeLists.txt b/CMakeLists.txt
index ccca95c1..3d179778 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -26,9 +26,9 @@ include(${KS_DIR}/build/FindJSONC.cmake)
 
 find_package(Doxygen)
 
-# set(OpenGL_GL_PREFERENCE LEGACY)
-# find_package(OpenGL)
-# find_package(GLUT)
+set(OpenGL_GL_PREFERENCE LEGACY)
+find_package(OpenGL)
+find_package(GLUT)
 
 # find_package(Qt5Widgets 5.7.1)
 # find_package(Qt5Network)
diff --git a/Documentation/doxygen/dox_config b/Documentation/doxygen/dox_config
index 89b92842..0bbeb3f0 100644
--- a/Documentation/doxygen/dox_config
+++ b/Documentation/doxygen/dox_config
@@ -14,3 +14,4 @@ SORT_MEMBER_DOCS       = NO
 STRICT_PROTO_MATCHING  = YES
 DOT_MULTI_TARGETS      = YES
 PROJECT_LOGO           = ../../icons/KS_logo_stacked.svg
+EXCLUDE                = ../../src/stb_truetype.h
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index ae5de54d..3a07d824 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -22,8 +22,8 @@ install(TARGETS kshark LIBRARY DESTINATION ${_LIBDIR}/${KS_APP_NAME})
 if (OPENGL_FOUND AND GLUT_FOUND)
 
     message(STATUS "libkshark-plot")
-    add_library(kshark-plot  SHARED  libkshark-plot.c
-                                     KsPlotTools.cpp)
+    add_library(kshark-plot  SHARED  libkshark-plot.c)
+#                                      KsPlotTools.cpp)
 
     target_link_libraries(kshark-plot  kshark
                                        ${GLUT_LIBRARY}
diff --git a/src/libkshark-plot.c b/src/libkshark-plot.c
index 17d3b903..06483334 100644
--- a/src/libkshark-plot.c
+++ b/src/libkshark-plot.c
@@ -1,13 +1,22 @@
 /* SPDX-License-Identifier: LGPL-2.1 */
 
 /*
- * Copyright (C) 2018 VMware Inc, Yordan Karadzhov <y.karadz@gmail.com>
+ * Copyright (C) 2018 VMware Inc, Yordan Karadzhov (VMware) <y.karadz@gmail.com>
  */
 
- /**
-  *  @file    libkshark-plot.c
-  *  @brief   Basic tools for OpenGL plotting.
-  */
+/**
+ *  @file    libkshark-plot.c
+ *  @brief   Basic tools for OpenGL plotting.
+ */
+
+// C
+#ifndef _GNU_SOURCE
+/** Use GNU C Library. */
+#define _GNU_SOURCE
+#endif // _GNU_SOURCE
+
+#include <string.h>
+#include <stdio.h>
 
 // OpenGL
 #include <GL/freeglut.h>
@@ -16,6 +25,17 @@
 // KernelShark
 #include "libkshark-plot.h"
 
+/*
+ * STB TrueType (single-file public domain library)
+ * https://github.com/nothings/stb
+ */
+/** Generate implementation. */
+#define STB_TRUETYPE_IMPLEMENTATION
+
+/** Make the implementation private. */
+#define STBTT_STATIC
+#include "stb_truetype.h"
+
 /**
  * @brief Create an empty scene for drawing.
  *
@@ -66,7 +86,7 @@ void ksplot_init_opengl(int dpr)
 	glEnable(GL_POLYGON_SMOOTH);
 	glLineWidth(1.5 * dpr);
 	glPointSize(2.5 * dpr);
-	glClearColor(1, 1, 1, 1);
+	glClearColor(1, 1, 1, 1); // White
 }
 
 /**
@@ -210,3 +230,215 @@ void ksplot_draw_polygon_contour(const struct ksplot_point *points,
 			 col,
 			 size);
 }
+
+/**
+ * @brief Find a TrueType font file.
+ *
+ * @param font_family: The family name of the font.
+ * @param font_name: The name of the font file without the extention.
+ *
+ * @returns A string containing the absolute path to the TrueType font file
+ *	    on success, or NULL on failure. The user is responsible for freeing
+ *	    the string.
+ */
+char *ksplot_find_font_file(const char *font_family, const char *font_name)
+{
+	char buffer[1024], *end;
+	char *cmd = NULL;
+	int ret;
+	FILE *f;
+
+	ret = asprintf(&cmd, "fc-list \'%s\' |grep %s.ttf", font_family,
+							    font_name);
+	if (ret <= 0)
+		goto fail;
+
+	f = popen(cmd, "r");
+	free(cmd);
+	if (f == NULL)
+		goto fail;
+
+	end = fgets(buffer, sizeof(buffer), f);
+	pclose(f);
+	if (!end)
+		goto fail;
+
+	end = strchr(buffer, ':');
+	if (!end)
+		goto fail;
+
+	return strndup(buffer, end - buffer);
+
+ fail:
+	fprintf(stderr, "Failed to find font file.\n" );
+	return NULL;
+}
+
+/** The size of the bitmap matrix used to load the font. */
+#define KS_FONT_BITMAP_SIZE 1024
+
+/**
+ * @brief Initialize a font.
+ *
+ * @param font: Output location for the font descriptor.
+ * @param size: The size of the font.
+ * @param file: Input location for the truetype font file.
+ */
+bool ksplot_init_font(struct ksplot_font *font, float size, const char *file)
+{
+	unsigned char bitmap[KS_FONT_BITMAP_SIZE * KS_FONT_BITMAP_SIZE];
+	int ascent, descent, line_gap, lsb;
+	ssize_t buff_size, ret;
+	unsigned char *buffer;
+	stbtt_fontinfo info;
+	FILE *font_file;
+	float scale;
+
+	font_file = fopen(file, "rb");
+	if (!font_file) {
+		fprintf(stderr, "Failed to open font file!\n");
+		return false;
+	}
+
+	/* Get the size of the file. */
+	fseek(font_file, 0, SEEK_END);
+	buff_size = ftell(font_file);
+	fseek(font_file, 0, SEEK_SET);
+
+	buffer = malloc(buff_size);
+	if (!buffer) {
+		fprintf(stderr, "Failed to allocat memory for font!\n");
+		goto close_file;
+	}
+
+	ret = fread(buffer, buff_size, 1, font_file);
+	fclose(font_file);
+
+	if (ret == 0) {
+		fprintf(stderr, "Failed to read from font file!\n");
+		goto free_buffer;
+	}
+
+	if (!stbtt_InitFont(&info, buffer, 0)) {
+		fprintf(stderr, "Failed to init font!\n");
+		goto free_buffer;
+	}
+
+	/* Get the font's metrics. */
+	scale = stbtt_ScaleForMappingEmToPixels(&info, size);
+	stbtt_GetFontVMetrics(&info, &ascent, &descent, &line_gap);
+	if (line_gap == 0)
+		line_gap = - descent;
+	/*
+	 * Calculate the dimensions of the font. Note that the descent has
+	 * a negative value.
+	 */
+	font->height = (- descent + ascent + line_gap) * scale;
+	font->base = (- descent + line_gap / 2) * scale;
+	font->size = size;
+
+	/*
+	 * The width of the 'z' character will be considered as an average
+	 * character width.
+	 */
+	stbtt_GetCodepointHMetrics(&info, 'z', &font->char_width, &lsb);
+	font->char_width *= scale;
+
+	ret = stbtt_BakeFontBitmap(buffer,
+				   0,
+				   size,
+				   bitmap,
+				   KS_FONT_BITMAP_SIZE,
+				   KS_FONT_BITMAP_SIZE,
+				   KS_SPACE_CHAR,
+				   KS_N_CHAR,
+				   font->cdata);
+
+	if (ret <= 0) {
+		fprintf(stderr, "Failed to bake font bitmap!\n");
+		goto free_buffer;
+	}
+
+	free(buffer);
+
+	glGenTextures(1, &font->texture_id);
+	glBindTexture(GL_TEXTURE_2D, font->texture_id);
+
+	glTexImage2D(GL_TEXTURE_2D,
+		     0,
+		     GL_ALPHA,
+		     KS_FONT_BITMAP_SIZE,
+		     KS_FONT_BITMAP_SIZE,
+		     0,
+		     GL_ALPHA,
+		     GL_UNSIGNED_BYTE,
+		     bitmap);
+
+	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
+	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
+	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
+	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
+
+	return true;
+
+ close_file:
+	fclose(font_file);
+
+ free_buffer:
+	free(buffer);
+	return false;
+}
+
+/**
+ * @brief Print(draw) a text.
+ *
+ * @param font: Intput location for the font descriptor.
+ * @param col: The color of the polygon.
+ * @param x: Horizontal coordinate of the beginning of the text.
+ * @param y: Verticalal coordinate of the beginning of the text.
+ * @param text: The text to be drawn.
+ */
+void ksplot_print_text(const struct ksplot_font *font,
+		       const struct ksplot_color *col,
+		       float x, float y,
+		       const char *text)
+{
+	glEnable(GL_TEXTURE_2D);
+
+	/* Set the color of the text. */
+	if (col)
+		glColor3ub(col->red, col->green, col->blue);
+	else
+		glColor3ub(0, 0, 0); // Black
+
+	glBindTexture(GL_TEXTURE_2D, font->texture_id);
+	glBegin(GL_QUADS);
+	for (; *text; ++text) {
+		if (*text < KS_SPACE_CHAR && *text > KS_TILDA_CHAR)
+			continue;
+
+		stbtt_aligned_quad quad;
+		stbtt_GetBakedQuad(font->cdata,
+				   KS_FONT_BITMAP_SIZE,
+				   KS_FONT_BITMAP_SIZE,
+				   *text - KS_SPACE_CHAR,
+				   &x, &y,
+				   &quad,
+				   1);
+
+		glTexCoord2f(quad.s0, quad.t1);
+		glVertex2f(quad.x0, quad.y1);
+
+		glTexCoord2f(quad.s1, quad.t1);
+		glVertex2f(quad.x1, quad.y1);
+
+		glTexCoord2f(quad.s1, quad.t0);
+		glVertex2f(quad.x1, quad.y0);
+
+		glTexCoord2f(quad.s0, quad.t0);
+		glVertex2f(quad.x0, quad.y0);
+	}
+
+	glEnd();
+	glDisable(GL_TEXTURE_2D);
+}
diff --git a/src/libkshark-plot.h b/src/libkshark-plot.h
index 9a4dbc02..0edf5d50 100644
--- a/src/libkshark-plot.h
+++ b/src/libkshark-plot.h
@@ -12,6 +12,15 @@
 #ifndef _LIB_KSHARK_PLOT_H
 #define _LIB_KSHARK_PLOT_H
 
+// C
+#include <stdbool.h>
+
+/*
+ * STB TrueType (single-file public domain library)
+ * https://github.com/nothings/stb
+ */
+#include "stb_truetype.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
@@ -62,6 +71,54 @@ void ksplot_draw_polygon_contour(const struct ksplot_point *points,
 				 const struct ksplot_color *col,
 				 float size);
 
+/** The index of the "Space" character. */
+#define KS_SPACE_CHAR 32
+
+/** The index of the "Tilda" character. */
+#define KS_TILDA_CHAR 126
+
+/** Total number of characters supported for drawing. */
+#define KS_N_CHAR (KS_TILDA_CHAR - KS_SPACE_CHAR + 1)
+
+/** Structure defining a font. */
+struct ksplot_font {
+	/** Identifier of the font's texture. */
+	GLuint texture_id;
+
+	/** Font's texture baking data. */
+	stbtt_bakedchar cdata[KS_N_CHAR];
+
+	/** The height of a text line. */
+	int height;
+
+	/** The vertical position of the font's baseline. */
+	int base;
+
+	/** The size of the font. */
+	int size;
+
+	/**
+	 * The width of the 'z' character. To be use as an average character
+	 * width.
+	 */
+	int char_width;
+};
+
+/** Check if the texture of the font is loaded. */
+static inline bool ksplot_font_is_loaded(struct ksplot_font *f)
+{
+	return f->texture_id > 1;
+}
+
+char *ksplot_find_font_file(const char *font_family, const char *font_name);
+
+bool ksplot_init_font(struct ksplot_font *font, float size, const char *file);
+
+void ksplot_print_text(const struct ksplot_font *font,
+		       const struct ksplot_color *col,
+		       float x, float y,
+		       const char *text);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/src/stb_truetype.h b/src/stb_truetype.h
new file mode 100644
index 00000000..62595a15
--- /dev/null
+++ b/src/stb_truetype.h
@@ -0,0 +1,5011 @@
+// stb_truetype.h - v1.24 - public domain
+// authored from 2009-2020 by Sean Barrett / RAD Game Tools
+//
+// =======================================================================
+//
+//    NO SECURITY GUARANTEE -- DO NOT USE THIS ON UNTRUSTED FONT FILES
+//
+// This library does no range checking of the offsets found in the file,
+// meaning an attacker can use it to read arbitrary memory.
+//
+// =======================================================================
+//
+//   This library processes TrueType files:
+//        parse files
+//        extract glyph metrics
+//        extract glyph shapes
+//        render glyphs to one-channel bitmaps with antialiasing (box filter)
+//        render glyphs to one-channel SDF bitmaps (signed-distance field/function)
+//
+//   Todo:
+//        non-MS cmaps
+//        crashproof on bad data
+//        hinting? (no longer patented)
+//        cleartype-style AA?
+//        optimize: use simple memory allocator for intermediates
+//        optimize: build edge-list directly from curves
+//        optimize: rasterize directly from curves?
+//
+// ADDITIONAL CONTRIBUTORS
+//
+//   Mikko Mononen: compound shape support, more cmap formats
+//   Tor Andersson: kerning, subpixel rendering
+//   Dougall Johnson: OpenType / Type 2 font handling
+//   Daniel Ribeiro Maciel: basic GPOS-based kerning
+//
+//   Misc other:
+//       Ryan Gordon
+//       Simon Glass
+//       github:IntellectualKitty
+//       Imanol Celaya
+//       Daniel Ribeiro Maciel
+//
+//   Bug/warning reports/fixes:
+//       "Zer" on mollyrocket       Fabian "ryg" Giesen   github:NiLuJe
+//       Cass Everitt               Martins Mozeiko       github:aloucks
+//       stoiko (Haemimont Games)   Cap Petschulat        github:oyvindjam
+//       Brian Hook                 Omar Cornut           github:vassvik
+//       Walter van Niftrik         Ryan Griege
+//       David Gow                  Peter LaValle
+//       David Given                Sergey Popov
+//       Ivan-Assen Ivanov          Giumo X. Clanjor
+//       Anthony Pesch              Higor Euripedes
+//       Johan Duparc               Thomas Fields
+//       Hou Qiming                 Derek Vinyard
+//       Rob Loach                  Cort Stratton
+//       Kenney Phillis Jr.         Brian Costabile
+//       Ken Voskuil (kaesve)
+//
+// VERSION HISTORY
+//
+//   1.24 (2020-02-05) fix warning
+//   1.23 (2020-02-02) query SVG data for glyphs; query whole kerning table (but only kern not GPOS)
+//   1.22 (2019-08-11) minimize missing-glyph duplication; fix kerning if both 'GPOS' and 'kern' are defined
+//   1.21 (2019-02-25) fix warning
+//   1.20 (2019-02-07) PackFontRange skips missing codepoints; GetScaleFontVMetrics()
+//   1.19 (2018-02-11) GPOS kerning, STBTT_fmod
+//   1.18 (2018-01-29) add missing function
+//   1.17 (2017-07-23) make more arguments const; doc fix
+//   1.16 (2017-07-12) SDF support
+//   1.15 (2017-03-03) make more arguments const
+//   1.14 (2017-01-16) num-fonts-in-TTC function
+//   1.13 (2017-01-02) support OpenType fonts, certain Apple fonts
+//   1.12 (2016-10-25) suppress warnings about casting away const with -Wcast-qual
+//   1.11 (2016-04-02) fix unused-variable warning
+//   1.10 (2016-04-02) user-defined fabs(); rare memory leak; remove duplicate typedef
+//   1.09 (2016-01-16) warning fix; avoid crash on outofmem; use allocation userdata properly
+//   1.08 (2015-09-13) document stbtt_Rasterize(); fixes for vertical & horizontal edges
+//   1.07 (2015-08-01) allow PackFontRanges to accept arrays of sparse codepoints;
+//                     variant PackFontRanges to pack and render in separate phases;
+//                     fix stbtt_GetFontOFfsetForIndex (never worked for non-0 input?);
+//                     fixed an assert() bug in the new rasterizer
+//                     replace assert() with STBTT_assert() in new rasterizer
+//
+//   Full history can be found at the end of this file.
+//
+// LICENSE
+//
+//   See end of file for license information.
+//
+// USAGE
+//
+//   Include this file in whatever places need to refer to it. In ONE C/C++
+//   file, write:
+//      #define STB_TRUETYPE_IMPLEMENTATION
+//   before the #include of this file. This expands out the actual
+//   implementation into that C/C++ file.
+//
+//   To make the implementation private to the file that generates the implementation,
+//      #define STBTT_STATIC
+//
+//   Simple 3D API (don't ship this, but it's fine for tools and quick start)
+//           stbtt_BakeFontBitmap()               -- bake a font to a bitmap for use as texture
+//           stbtt_GetBakedQuad()                 -- compute quad to draw for a given char
+//
+//   Improved 3D API (more shippable):
+//           #include "stb_rect_pack.h"           -- optional, but you really want it
+//           stbtt_PackBegin()
+//           stbtt_PackSetOversampling()          -- for improved quality on small fonts
+//           stbtt_PackFontRanges()               -- pack and renders
+//           stbtt_PackEnd()
+//           stbtt_GetPackedQuad()
+//
+//   "Load" a font file from a memory buffer (you have to keep the buffer loaded)
+//           stbtt_InitFont()
+//           stbtt_GetFontOffsetForIndex()        -- indexing for TTC font collections
+//           stbtt_GetNumberOfFonts()             -- number of fonts for TTC font collections
+//
+//   Render a unicode codepoint to a bitmap
+//           stbtt_GetCodepointBitmap()           -- allocates and returns a bitmap
+//           stbtt_MakeCodepointBitmap()          -- renders into bitmap you provide
+//           stbtt_GetCodepointBitmapBox()        -- how big the bitmap must be
+//
+//   Character advance/positioning
+//           stbtt_GetCodepointHMetrics()
+//           stbtt_GetFontVMetrics()
+//           stbtt_GetFontVMetricsOS2()
+//           stbtt_GetCodepointKernAdvance()
+//
+//   Starting with version 1.06, the rasterizer was replaced with a new,
+//   faster and generally-more-precise rasterizer. The new rasterizer more
+//   accurately measures pixel coverage for anti-aliasing, except in the case
+//   where multiple shapes overlap, in which case it overestimates the AA pixel
+//   coverage. Thus, anti-aliasing of intersecting shapes may look wrong. If
+//   this turns out to be a problem, you can re-enable the old rasterizer with
+//        #define STBTT_RASTERIZER_VERSION 1
+//   which will incur about a 15% speed hit.
+//
+// ADDITIONAL DOCUMENTATION
+//
+//   Immediately after this block comment are a series of sample programs.
+//
+//   After the sample programs is the "header file" section. This section
+//   includes documentation for each API function.
+//
+//   Some important concepts to understand to use this library:
+//
+//      Codepoint
+//         Characters are defined by unicode codepoints, e.g. 65 is
+//         uppercase A, 231 is lowercase c with a cedilla, 0x7e30 is
+//         the hiragana for "ma".
+//
+//      Glyph
+//         A visual character shape (every codepoint is rendered as
+//         some glyph)
+//
+//      Glyph index
+//         A font-specific integer ID representing a glyph
+//
+//      Baseline
+//         Glyph shapes are defined relative to a baseline, which is the
+//         bottom of uppercase characters. Characters extend both above
+//         and below the baseline.
+//
+//      Current Point
+//         As you draw text to the screen, you keep track of a "current point"
+//         which is the origin of each character. The current point's vertical
+//         position is the baseline. Even "baked fonts" use this model.
+//
+//      Vertical Font Metrics
+//         The vertical qualities of the font, used to vertically position
+//         and space the characters. See docs for stbtt_GetFontVMetrics.
+//
+//      Font Size in Pixels or Points
+//         The preferred interface for specifying font sizes in stb_truetype
+//         is to specify how tall the font's vertical extent should be in pixels.
+//         If that sounds good enough, skip the next paragraph.
+//
+//         Most font APIs instead use "points", which are a common typographic
+//         measurement for describing font size, defined as 72 points per inch.
+//         stb_truetype provides a point API for compatibility. However, true
+//         "per inch" conventions don't make much sense on computer displays
+//         since different monitors have different number of pixels per
+//         inch. For example, Windows traditionally uses a convention that
+//         there are 96 pixels per inch, thus making 'inch' measurements have
+//         nothing to do with inches, and thus effectively defining a point to
+//         be 1.333 pixels. Additionally, the TrueType font data provides
+//         an explicit scale factor to scale a given font's glyphs to points,
+//         but the author has observed that this scale factor is often wrong
+//         for non-commercial fonts, thus making fonts scaled in points
+//         according to the TrueType spec incoherently sized in practice.
+//
+// DETAILED USAGE:
+//
+//  Scale:
+//    Select how high you want the font to be, in points or pixels.
+//    Call ScaleForPixelHeight or ScaleForMappingEmToPixels to compute
+//    a scale factor SF that will be used by all other functions.
+//
+//  Baseline:
+//    You need to select a y-coordinate that is the baseline of where
+//    your text will appear. Call GetFontBoundingBox to get the baseline-relative
+//    bounding box for all characters. SF*-y0 will be the distance in pixels
+//    that the worst-case character could extend above the baseline, so if
+//    you want the top edge of characters to appear at the top of the
+//    screen where y=0, then you would set the baseline to SF*-y0.
+//
+//  Current point:
+//    Set the current point where the first character will appear. The
+//    first character could extend left of the current point; this is font
+//    dependent. You can either choose a current point that is the leftmost
+//    point and hope, or add some padding, or check the bounding box or
+//    left-side-bearing of the first character to be displayed and set
+//    the current point based on that.
+//
+//  Displaying a character:
+//    Compute the bounding box of the character. It will contain signed values
+//    relative to <current_point, baseline>. I.e. if it returns x0,y0,x1,y1,
+//    then the character should be displayed in the rectangle from
+//    <current_point+SF*x0, baseline+SF*y0> to <current_point+SF*x1,baseline+SF*y1).
+//
+//  Advancing for the next character:
+//    Call GlyphHMetrics, and compute 'current_point += SF * advance'.
+//
+//
+// ADVANCED USAGE
+//
+//   Quality:
+//
+//    - Use the functions with Subpixel at the end to allow your characters
+//      to have subpixel positioning. Since the font is anti-aliased, not
+//      hinted, this is very import for quality. (This is not possible with
+//      baked fonts.)
+//
+//    - Kerning is now supported, and if you're supporting subpixel rendering
+//      then kerning is worth using to give your text a polished look.
+//
+//   Performance:
+//
+//    - Convert Unicode codepoints to glyph indexes and operate on the glyphs;
+//      if you don't do this, stb_truetype is forced to do the conversion on
+//      every call.
+//
+//    - There are a lot of memory allocations. We should modify it to take
+//      a temp buffer and allocate from the temp buffer (without freeing),
+//      should help performance a lot.
+//
+// NOTES
+//
+//   The system uses the raw data found in the .ttf file without changing it
+//   and without building auxiliary data structures. This is a bit inefficient
+//   on little-endian systems (the data is big-endian), but assuming you're
+//   caching the bitmaps or glyph shapes this shouldn't be a big deal.
+//
+//   It appears to be very hard to programmatically determine what font a
+//   given file is in a general way. I provide an API for this, but I don't
+//   recommend it.
+//
+//
+// PERFORMANCE MEASUREMENTS FOR 1.06:
+//
+//                      32-bit     64-bit
+//   Previous release:  8.83 s     7.68 s
+//   Pool allocations:  7.72 s     6.34 s
+//   Inline sort     :  6.54 s     5.65 s
+//   New rasterizer  :  5.63 s     5.00 s
+
+//////////////////////////////////////////////////////////////////////////////
+//////////////////////////////////////////////////////////////////////////////
+////
+////  SAMPLE PROGRAMS
+////
+//
+//  Incomplete text-in-3d-api example, which draws quads properly aligned to be lossless
+//
+#if 0
+#define STB_TRUETYPE_IMPLEMENTATION  // force following include to generate implementation
+#include "stb_truetype.h"
+
+unsigned char ttf_buffer[1<<20];
+unsigned char temp_bitmap[512*512];
+
+stbtt_bakedchar cdata[96]; // ASCII 32..126 is 95 glyphs
+GLuint ftex;
+
+void my_stbtt_initfont(void)
+{
+   fread(ttf_buffer, 1, 1<<20, fopen("c:/windows/fonts/times.ttf", "rb"));
+   stbtt_BakeFontBitmap(ttf_buffer,0, 32.0, temp_bitmap,512,512, 32,96, cdata); // no guarantee this fits!
+   // can free ttf_buffer at this point
+   glGenTextures(1, &ftex);
+   glBindTexture(GL_TEXTURE_2D, ftex);
+   glTexImage2D(GL_TEXTURE_2D, 0, GL_ALPHA, 512,512, 0, GL_ALPHA, GL_UNSIGNED_BYTE, temp_bitmap);
+   // can free temp_bitmap at this point
+   glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
+}
+
+void my_stbtt_print(float x, float y, char *text)
+{
+   // assume orthographic projection with units = screen pixels, origin at top left
+   glEnable(GL_TEXTURE_2D);
+   glBindTexture(GL_TEXTURE_2D, ftex);
+   glBegin(GL_QUADS);
+   while (*text) {
+      if (*text >= 32 && *text < 128) {
+         stbtt_aligned_quad q;
+         stbtt_GetBakedQuad(cdata, 512,512, *text-32, &x,&y,&q,1);//1=opengl & d3d10+,0=d3d9
+         glTexCoord2f(q.s0,q.t1); glVertex2f(q.x0,q.y0);
+         glTexCoord2f(q.s1,q.t1); glVertex2f(q.x1,q.y0);
+         glTexCoord2f(q.s1,q.t0); glVertex2f(q.x1,q.y1);
+         glTexCoord2f(q.s0,q.t0); glVertex2f(q.x0,q.y1);
+      }
+      ++text;
+   }
+   glEnd();
+}
+#endif
+//
+//
+//////////////////////////////////////////////////////////////////////////////
+//
+// Complete program (this compiles): get a single bitmap, print as ASCII art
+//
+#if 0
+#include <stdio.h>
+#define STB_TRUETYPE_IMPLEMENTATION  // force following include to generate implementation
+#include "stb_truetype.h"
+
+char ttf_buffer[1<<25];
+
+int main(int argc, char **argv)
+{
+   stbtt_fontinfo font;
+   unsigned char *bitmap;
+   int w,h,i,j,c = (argc > 1 ? atoi(argv[1]) : 'a'), s = (argc > 2 ? atoi(argv[2]) : 20);
+
+   fread(ttf_buffer, 1, 1<<25, fopen(argc > 3 ? argv[3] : "c:/windows/fonts/arialbd.ttf", "rb"));
+
+   stbtt_InitFont(&font, ttf_buffer, stbtt_GetFontOffsetForIndex(ttf_buffer,0));
+   bitmap = stbtt_GetCodepointBitmap(&font, 0,stbtt_ScaleForPixelHeight(&font, s), c, &w, &h, 0,0);
+
+   for (j=0; j < h; ++j) {
+      for (i=0; i < w; ++i)
+         putchar(" .:ioVM@"[bitmap[j*w+i]>>5]);
+      putchar('\n');
+   }
+   return 0;
+}
+#endif
+//
+// Output:
+//
+//     .ii.
+//    @@@@@@.
+//   V@Mio@@o
+//   :i.  V@V
+//     :oM@@M
+//   :@@@MM@M
+//   @@o  o@M
+//  :@@.  M@M
+//   @@@o@@@@
+//   :M@@V:@@.
+//
+//////////////////////////////////////////////////////////////////////////////
+//
+// Complete program: print "Hello World!" banner, with bugs
+//
+#if 0
+char buffer[24<<20];
+unsigned char screen[20][79];
+
+int main(int arg, char **argv)
+{
+   stbtt_fontinfo font;
+   int i,j,ascent,baseline,ch=0;
+   float scale, xpos=2; // leave a little padding in case the character extends left
+   char *text = "Heljo World!"; // intentionally misspelled to show 'lj' brokenness
+
+   fread(buffer, 1, 1000000, fopen("c:/windows/fonts/arialbd.ttf", "rb"));
+   stbtt_InitFont(&font, buffer, 0);
+
+   scale = stbtt_ScaleForPixelHeight(&font, 15);
+   stbtt_GetFontVMetrics(&font, &ascent,0,0);
+   baseline = (int) (ascent*scale);
+
+   while (text[ch]) {
+      int advance,lsb,x0,y0,x1,y1;
+      float x_shift = xpos - (float) floor(xpos);
+      stbtt_GetCodepointHMetrics(&font, text[ch], &advance, &lsb);
+      stbtt_GetCodepointBitmapBoxSubpixel(&font, text[ch], scale,scale,x_shift,0, &x0,&y0,&x1,&y1);
+      stbtt_MakeCodepointBitmapSubpixel(&font, &screen[baseline + y0][(int) xpos + x0], x1-x0,y1-y0, 79, scale,scale,x_shift,0, text[ch]);
+      // note that this stomps the old data, so where character boxes overlap (e.g. 'lj') it's wrong
+      // because this API is really for baking character bitmaps into textures. if you want to render
+      // a sequence of characters, you really need to render each bitmap to a temp buffer, then
+      // "alpha blend" that into the working buffer
+      xpos += (advance * scale);
+      if (text[ch+1])
+         xpos += scale*stbtt_GetCodepointKernAdvance(&font, text[ch],text[ch+1]);
+      ++ch;
+   }
+
+   for (j=0; j < 20; ++j) {
+      for (i=0; i < 78; ++i)
+         putchar(" .:ioVM@"[screen[j][i]>>5]);
+      putchar('\n');
+   }
+
+   return 0;
+}
+#endif
+
+
+//////////////////////////////////////////////////////////////////////////////
+//////////////////////////////////////////////////////////////////////////////
+////
+////   INTEGRATION WITH YOUR CODEBASE
+////
+////   The following sections allow you to supply alternate definitions
+////   of C library functions used by stb_truetype, e.g. if you don't
+////   link with the C runtime library.
+
+#ifdef STB_TRUETYPE_IMPLEMENTATION
+   // #define your own (u)stbtt_int8/16/32 before including to override this
+   #ifndef stbtt_uint8
+   typedef unsigned char   stbtt_uint8;
+   typedef signed   char   stbtt_int8;
+   typedef unsigned short  stbtt_uint16;
+   typedef signed   short  stbtt_int16;
+   typedef unsigned int    stbtt_uint32;
+   typedef signed   int    stbtt_int32;
+   #endif
+
+   typedef char stbtt__check_size32[sizeof(stbtt_int32)==4 ? 1 : -1];
+   typedef char stbtt__check_size16[sizeof(stbtt_int16)==2 ? 1 : -1];
+
+   // e.g. #define your own STBTT_ifloor/STBTT_iceil() to avoid math.h
+   #ifndef STBTT_ifloor
+   #include <math.h>
+   #define STBTT_ifloor(x)   ((int) floor(x))
+   #define STBTT_iceil(x)    ((int) ceil(x))
+   #endif
+
+   #ifndef STBTT_sqrt
+   #include <math.h>
+   #define STBTT_sqrt(x)      sqrt(x)
+   #define STBTT_pow(x,y)     pow(x,y)
+   #endif
+
+   #ifndef STBTT_fmod
+   #include <math.h>
+   #define STBTT_fmod(x,y)    fmod(x,y)
+   #endif
+
+   #ifndef STBTT_cos
+   #include <math.h>
+   #define STBTT_cos(x)       cos(x)
+   #define STBTT_acos(x)      acos(x)
+   #endif
+
+   #ifndef STBTT_fabs
+   #include <math.h>
+   #define STBTT_fabs(x)      fabs(x)
+   #endif
+
+   // #define your own functions "STBTT_malloc" / "STBTT_free" to avoid malloc.h
+   #ifndef STBTT_malloc
+   #include <stdlib.h>
+   #define STBTT_malloc(x,u)  ((void)(u),malloc(x))
+   #define STBTT_free(x,u)    ((void)(u),free(x))
+   #endif
+
+   #ifndef STBTT_assert
+   #include <assert.h>
+   #define STBTT_assert(x)    assert(x)
+   #endif
+
+   #ifndef STBTT_strlen
+   #include <string.h>
+   #define STBTT_strlen(x)    strlen(x)
+   #endif
+
+   #ifndef STBTT_memcpy
+   #include <string.h>
+   #define STBTT_memcpy       memcpy
+   #define STBTT_memset       memset
+   #endif
+#endif
+
+///////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////
+////
+////   INTERFACE
+////
+////
+
+#ifndef __STB_INCLUDE_STB_TRUETYPE_H__
+#define __STB_INCLUDE_STB_TRUETYPE_H__
+
+#ifdef STBTT_STATIC
+#define STBTT_DEF static
+#else
+#define STBTT_DEF extern
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// private structure
+typedef struct
+{
+   unsigned char *data;
+   int cursor;
+   int size;
+} stbtt__buf;
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// TEXTURE BAKING API
+//
+// If you use this API, you only have to call two functions ever.
+//
+
+typedef struct
+{
+   unsigned short x0,y0,x1,y1; // coordinates of bbox in bitmap
+   float xoff,yoff,xadvance;
+} stbtt_bakedchar;
+
+STBTT_DEF int stbtt_BakeFontBitmap(const unsigned char *data, int offset,  // font location (use offset=0 for plain .ttf)
+                                float pixel_height,                     // height of font in pixels
+                                unsigned char *pixels, int pw, int ph,  // bitmap to be filled in
+                                int first_char, int num_chars,          // characters to bake
+                                stbtt_bakedchar *chardata);             // you allocate this, it's num_chars long
+// if return is positive, the first unused row of the bitmap
+// if return is negative, returns the negative of the number of characters that fit
+// if return is 0, no characters fit and no rows were used
+// This uses a very crappy packing.
+
+typedef struct
+{
+   float x0,y0,s0,t0; // top-left
+   float x1,y1,s1,t1; // bottom-right
+} stbtt_aligned_quad;
+
+STBTT_DEF void stbtt_GetBakedQuad(const stbtt_bakedchar *chardata, int pw, int ph,  // same data as above
+                               int char_index,             // character to display
+                               float *xpos, float *ypos,   // pointers to current position in screen pixel space
+                               stbtt_aligned_quad *q,      // output: quad to draw
+                               int opengl_fillrule);       // true if opengl fill rule; false if DX9 or earlier
+// Call GetBakedQuad with char_index = 'character - first_char', and it
+// creates the quad you need to draw and advances the current position.
+//
+// The coordinate system used assumes y increases downwards.
+//
+// Characters will extend both above and below the current position;
+// see discussion of "BASELINE" above.
+//
+// It's inefficient; you might want to c&p it and optimize it.
+
+STBTT_DEF void stbtt_GetScaledFontVMetrics(const unsigned char *fontdata, int index, float size, float *ascent, float *descent, float *lineGap);
+// Query the font vertical metrics without having to create a font first.
+
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// NEW TEXTURE BAKING API
+//
+// This provides options for packing multiple fonts into one atlas, not
+// perfectly but better than nothing.
+
+typedef struct
+{
+   unsigned short x0,y0,x1,y1; // coordinates of bbox in bitmap
+   float xoff,yoff,xadvance;
+   float xoff2,yoff2;
+} stbtt_packedchar;
+
+typedef struct stbtt_pack_context stbtt_pack_context;
+typedef struct stbtt_fontinfo stbtt_fontinfo;
+#ifndef STB_RECT_PACK_VERSION
+typedef struct stbrp_rect stbrp_rect;
+#endif
+
+STBTT_DEF int  stbtt_PackBegin(stbtt_pack_context *spc, unsigned char *pixels, int width, int height, int stride_in_bytes, int padding, void *alloc_context);
+// Initializes a packing context stored in the passed-in stbtt_pack_context.
+// Future calls using this context will pack characters into the bitmap passed
+// in here: a 1-channel bitmap that is width * height. stride_in_bytes is
+// the distance from one row to the next (or 0 to mean they are packed tightly
+// together). "padding" is the amount of padding to leave between each
+// character (normally you want '1' for bitmaps you'll use as textures with
+// bilinear filtering).
+//
+// Returns 0 on failure, 1 on success.
+
+STBTT_DEF void stbtt_PackEnd  (stbtt_pack_context *spc);
+// Cleans up the packing context and frees all memory.
+
+#define STBTT_POINT_SIZE(x)   (-(x))
+
+STBTT_DEF int  stbtt_PackFontRange(stbtt_pack_context *spc, const unsigned char *fontdata, int font_index, float font_size,
+                                int first_unicode_char_in_range, int num_chars_in_range, stbtt_packedchar *chardata_for_range);
+// Creates character bitmaps from the font_index'th font found in fontdata (use
+// font_index=0 if you don't know what that is). It creates num_chars_in_range
+// bitmaps for characters with unicode values starting at first_unicode_char_in_range
+// and increasing. Data for how to render them is stored in chardata_for_range;
+// pass these to stbtt_GetPackedQuad to get back renderable quads.
+//
+// font_size is the full height of the character from ascender to descender,
+// as computed by stbtt_ScaleForPixelHeight. To use a point size as computed
+// by stbtt_ScaleForMappingEmToPixels, wrap the point size in STBTT_POINT_SIZE()
+// and pass that result as 'font_size':
+//       ...,                  20 , ... // font max minus min y is 20 pixels tall
+//       ..., STBTT_POINT_SIZE(20), ... // 'M' is 20 pixels tall
+
+typedef struct
+{
+   float font_size;
+   int first_unicode_codepoint_in_range;  // if non-zero, then the chars are continuous, and this is the first codepoint
+   int *array_of_unicode_codepoints;       // if non-zero, then this is an array of unicode codepoints
+   int num_chars;
+   stbtt_packedchar *chardata_for_range; // output
+   unsigned char h_oversample, v_oversample; // don't set these, they're used internally
+} stbtt_pack_range;
+
+STBTT_DEF int  stbtt_PackFontRanges(stbtt_pack_context *spc, const unsigned char *fontdata, int font_index, stbtt_pack_range *ranges, int num_ranges);
+// Creates character bitmaps from multiple ranges of characters stored in
+// ranges. This will usually create a better-packed bitmap than multiple
+// calls to stbtt_PackFontRange. Note that you can call this multiple
+// times within a single PackBegin/PackEnd.
+
+STBTT_DEF void stbtt_PackSetOversampling(stbtt_pack_context *spc, unsigned int h_oversample, unsigned int v_oversample);
+// Oversampling a font increases the quality by allowing higher-quality subpixel
+// positioning, and is especially valuable at smaller text sizes.
+//
+// This function sets the amount of oversampling for all following calls to
+// stbtt_PackFontRange(s) or stbtt_PackFontRangesGatherRects for a given
+// pack context. The default (no oversampling) is achieved by h_oversample=1
+// and v_oversample=1. The total number of pixels required is
+// h_oversample*v_oversample larger than the default; for example, 2x2
+// oversampling requires 4x the storage of 1x1. For best results, render
+// oversampled textures with bilinear filtering. Look at the readme in
+// stb/tests/oversample for information about oversampled fonts
+//
+// To use with PackFontRangesGather etc., you must set it before calls
+// call to PackFontRangesGatherRects.
+
+STBTT_DEF void stbtt_PackSetSkipMissingCodepoints(stbtt_pack_context *spc, int skip);
+// If skip != 0, this tells stb_truetype to skip any codepoints for which
+// there is no corresponding glyph. If skip=0, which is the default, then
+// codepoints without a glyph recived the font's "missing character" glyph,
+// typically an empty box by convention.
+
+STBTT_DEF void stbtt_GetPackedQuad(const stbtt_packedchar *chardata, int pw, int ph,  // same data as above
+                               int char_index,             // character to display
+                               float *xpos, float *ypos,   // pointers to current position in screen pixel space
+                               stbtt_aligned_quad *q,      // output: quad to draw
+                               int align_to_integer);
+
+STBTT_DEF int  stbtt_PackFontRangesGatherRects(stbtt_pack_context *spc, const stbtt_fontinfo *info, stbtt_pack_range *ranges, int num_ranges, stbrp_rect *rects);
+STBTT_DEF void stbtt_PackFontRangesPackRects(stbtt_pack_context *spc, stbrp_rect *rects, int num_rects);
+STBTT_DEF int  stbtt_PackFontRangesRenderIntoRects(stbtt_pack_context *spc, const stbtt_fontinfo *info, stbtt_pack_range *ranges, int num_ranges, stbrp_rect *rects);
+// Calling these functions in sequence is roughly equivalent to calling
+// stbtt_PackFontRanges(). If you more control over the packing of multiple
+// fonts, or if you want to pack custom data into a font texture, take a look
+// at the source to of stbtt_PackFontRanges() and create a custom version
+// using these functions, e.g. call GatherRects multiple times,
+// building up a single array of rects, then call PackRects once,
+// then call RenderIntoRects repeatedly. This may result in a
+// better packing than calling PackFontRanges multiple times
+// (or it may not).
+
+// this is an opaque structure that you shouldn't mess with which holds
+// all the context needed from PackBegin to PackEnd.
+struct stbtt_pack_context {
+   void *user_allocator_context;
+   void *pack_info;
+   int   width;
+   int   height;
+   int   stride_in_bytes;
+   int   padding;
+   int   skip_missing;
+   unsigned int   h_oversample, v_oversample;
+   unsigned char *pixels;
+   void  *nodes;
+};
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// FONT LOADING
+//
+//
+
+STBTT_DEF int stbtt_GetNumberOfFonts(const unsigned char *data);
+// This function will determine the number of fonts in a font file.  TrueType
+// collection (.ttc) files may contain multiple fonts, while TrueType font
+// (.ttf) files only contain one font. The number of fonts can be used for
+// indexing with the previous function where the index is between zero and one
+// less than the total fonts. If an error occurs, -1 is returned.
+
+STBTT_DEF int stbtt_GetFontOffsetForIndex(const unsigned char *data, int index);
+// Each .ttf/.ttc file may have more than one font. Each font has a sequential
+// index number starting from 0. Call this function to get the font offset for
+// a given index; it returns -1 if the index is out of range. A regular .ttf
+// file will only define one font and it always be at offset 0, so it will
+// return '0' for index 0, and -1 for all other indices.
+
+// The following structure is defined publicly so you can declare one on
+// the stack or as a global or etc, but you should treat it as opaque.
+struct stbtt_fontinfo
+{
+   void           * userdata;
+   unsigned char  * data;              // pointer to .ttf file
+   int              fontstart;         // offset of start of font
+
+   int numGlyphs;                     // number of glyphs, needed for range checking
+
+   int loca,head,glyf,hhea,hmtx,kern,gpos,svg; // table locations as offset from start of .ttf
+   int index_map;                     // a cmap mapping for our chosen character encoding
+   int indexToLocFormat;              // format needed to map from glyph index to glyph
+
+   stbtt__buf cff;                    // cff font data
+   stbtt__buf charstrings;            // the charstring index
+   stbtt__buf gsubrs;                 // global charstring subroutines index
+   stbtt__buf subrs;                  // private charstring subroutines index
+   stbtt__buf fontdicts;              // array of font dicts
+   stbtt__buf fdselect;               // map from glyph to fontdict
+};
+
+STBTT_DEF int stbtt_InitFont(stbtt_fontinfo *info, const unsigned char *data, int offset);
+// Given an offset into the file that defines a font, this function builds
+// the necessary cached info for the rest of the system. You must allocate
+// the stbtt_fontinfo yourself, and stbtt_InitFont will fill it out. You don't
+// need to do anything special to free it, because the contents are pure
+// value data with no additional data structures. Returns 0 on failure.
+
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// CHARACTER TO GLYPH-INDEX CONVERSIOn
+
+STBTT_DEF int stbtt_FindGlyphIndex(const stbtt_fontinfo *info, int unicode_codepoint);
+// If you're going to perform multiple operations on the same character
+// and you want a speed-up, call this function with the character you're
+// going to process, then use glyph-based functions instead of the
+// codepoint-based functions.
+// Returns 0 if the character codepoint is not defined in the font.
+
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// CHARACTER PROPERTIES
+//
+
+STBTT_DEF float stbtt_ScaleForPixelHeight(const stbtt_fontinfo *info, float pixels);
+// computes a scale factor to produce a font whose "height" is 'pixels' tall.
+// Height is measured as the distance from the highest ascender to the lowest
+// descender; in other words, it's equivalent to calling stbtt_GetFontVMetrics
+// and computing:
+//       scale = pixels / (ascent - descent)
+// so if you prefer to measure height by the ascent only, use a similar calculation.
+
+STBTT_DEF float stbtt_ScaleForMappingEmToPixels(const stbtt_fontinfo *info, float pixels);
+// computes a scale factor to produce a font whose EM size is mapped to
+// 'pixels' tall. This is probably what traditional APIs compute, but
+// I'm not positive.
+
+STBTT_DEF void stbtt_GetFontVMetrics(const stbtt_fontinfo *info, int *ascent, int *descent, int *lineGap);
+// ascent is the coordinate above the baseline the font extends; descent
+// is the coordinate below the baseline the font extends (i.e. it is typically negative)
+// lineGap is the spacing between one row's descent and the next row's ascent...
+// so you should advance the vertical position by "*ascent - *descent + *lineGap"
+//   these are expressed in unscaled coordinates, so you must multiply by
+//   the scale factor for a given size
+
+STBTT_DEF int  stbtt_GetFontVMetricsOS2(const stbtt_fontinfo *info, int *typoAscent, int *typoDescent, int *typoLineGap);
+// analogous to GetFontVMetrics, but returns the "typographic" values from the OS/2
+// table (specific to MS/Windows TTF files).
+//
+// Returns 1 on success (table present), 0 on failure.
+
+STBTT_DEF void stbtt_GetFontBoundingBox(const stbtt_fontinfo *info, int *x0, int *y0, int *x1, int *y1);
+// the bounding box around all possible characters
+
+STBTT_DEF void stbtt_GetCodepointHMetrics(const stbtt_fontinfo *info, int codepoint, int *advanceWidth, int *leftSideBearing);
+// leftSideBearing is the offset from the current horizontal position to the left edge of the character
+// advanceWidth is the offset from the current horizontal position to the next horizontal position
+//   these are expressed in unscaled coordinates
+
+STBTT_DEF int  stbtt_GetCodepointKernAdvance(const stbtt_fontinfo *info, int ch1, int ch2);
+// an additional amount to add to the 'advance' value between ch1 and ch2
+
+STBTT_DEF int stbtt_GetCodepointBox(const stbtt_fontinfo *info, int codepoint, int *x0, int *y0, int *x1, int *y1);
+// Gets the bounding box of the visible part of the glyph, in unscaled coordinates
+
+STBTT_DEF void stbtt_GetGlyphHMetrics(const stbtt_fontinfo *info, int glyph_index, int *advanceWidth, int *leftSideBearing);
+STBTT_DEF int  stbtt_GetGlyphKernAdvance(const stbtt_fontinfo *info, int glyph1, int glyph2);
+STBTT_DEF int  stbtt_GetGlyphBox(const stbtt_fontinfo *info, int glyph_index, int *x0, int *y0, int *x1, int *y1);
+// as above, but takes one or more glyph indices for greater efficiency
+
+typedef struct stbtt_kerningentry
+{
+   int glyph1; // use stbtt_FindGlyphIndex
+   int glyph2;
+   int advance;
+} stbtt_kerningentry;
+
+STBTT_DEF int  stbtt_GetKerningTableLength(const stbtt_fontinfo *info);
+STBTT_DEF int  stbtt_GetKerningTable(const stbtt_fontinfo *info, stbtt_kerningentry* table, int table_length);
+// Retrieves a complete list of all of the kerning pairs provided by the font
+// stbtt_GetKerningTable never writes more than table_length entries and returns how many entries it did write.
+// The table will be sorted by (a.glyph1 == b.glyph1)?(a.glyph2 < b.glyph2):(a.glyph1 < b.glyph1)
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// GLYPH SHAPES (you probably don't need these, but they have to go before
+// the bitmaps for C declaration-order reasons)
+//
+
+#ifndef STBTT_vmove // you can predefine these to use different values (but why?)
+   enum {
+      STBTT_vmove=1,
+      STBTT_vline,
+      STBTT_vcurve,
+      STBTT_vcubic
+   };
+#endif
+
+#ifndef stbtt_vertex // you can predefine this to use different values
+                   // (we share this with other code at RAD)
+   #define stbtt_vertex_type short // can't use stbtt_int16 because that's not visible in the header file
+   typedef struct
+   {
+      stbtt_vertex_type x,y,cx,cy,cx1,cy1;
+      unsigned char type,padding;
+   } stbtt_vertex;
+#endif
+
+STBTT_DEF int stbtt_IsGlyphEmpty(const stbtt_fontinfo *info, int glyph_index);
+// returns non-zero if nothing is drawn for this glyph
+
+STBTT_DEF int stbtt_GetCodepointShape(const stbtt_fontinfo *info, int unicode_codepoint, stbtt_vertex **vertices);
+STBTT_DEF int stbtt_GetGlyphShape(const stbtt_fontinfo *info, int glyph_index, stbtt_vertex **vertices);
+// returns # of vertices and fills *vertices with the pointer to them
+//   these are expressed in "unscaled" coordinates
+//
+// The shape is a series of contours. Each one starts with
+// a STBTT_moveto, then consists of a series of mixed
+// STBTT_lineto and STBTT_curveto segments. A lineto
+// draws a line from previous endpoint to its x,y; a curveto
+// draws a quadratic bezier from previous endpoint to
+// its x,y, using cx,cy as the bezier control point.
+
+STBTT_DEF void stbtt_FreeShape(const stbtt_fontinfo *info, stbtt_vertex *vertices);
+// frees the data allocated above
+
+STBTT_DEF int stbtt_GetCodepointSVG(const stbtt_fontinfo *info, int unicode_codepoint, const char **svg);
+STBTT_DEF int stbtt_GetGlyphSVG(const stbtt_fontinfo *info, int gl, const char **svg);
+// fills svg with the character's SVG data.
+// returns data size or 0 if SVG not found.
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// BITMAP RENDERING
+//
+
+STBTT_DEF void stbtt_FreeBitmap(unsigned char *bitmap, void *userdata);
+// frees the bitmap allocated below
+
+STBTT_DEF unsigned char *stbtt_GetCodepointBitmap(const stbtt_fontinfo *info, float scale_x, float scale_y, int codepoint, int *width, int *height, int *xoff, int *yoff);
+// allocates a large-enough single-channel 8bpp bitmap and renders the
+// specified character/glyph at the specified scale into it, with
+// antialiasing. 0 is no coverage (transparent), 255 is fully covered (opaque).
+// *width & *height are filled out with the width & height of the bitmap,
+// which is stored left-to-right, top-to-bottom.
+//
+// xoff/yoff are the offset it pixel space from the glyph origin to the top-left of the bitmap
+
+STBTT_DEF unsigned char *stbtt_GetCodepointBitmapSubpixel(const stbtt_fontinfo *info, float scale_x, float scale_y, float shift_x, float shift_y, int codepoint, int *width, int *height, int *xoff, int *yoff);
+// the same as stbtt_GetCodepoitnBitmap, but you can specify a subpixel
+// shift for the character
+
+STBTT_DEF void stbtt_MakeCodepointBitmap(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, int codepoint);
+// the same as stbtt_GetCodepointBitmap, but you pass in storage for the bitmap
+// in the form of 'output', with row spacing of 'out_stride' bytes. the bitmap
+// is clipped to out_w/out_h bytes. Call stbtt_GetCodepointBitmapBox to get the
+// width and height and positioning info for it first.
+
+STBTT_DEF void stbtt_MakeCodepointBitmapSubpixel(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, float shift_x, float shift_y, int codepoint);
+// same as stbtt_MakeCodepointBitmap, but you can specify a subpixel
+// shift for the character
+
+STBTT_DEF void stbtt_MakeCodepointBitmapSubpixelPrefilter(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, float shift_x, float shift_y, int oversample_x, int oversample_y, float *sub_x, float *sub_y, int codepoint);
+// same as stbtt_MakeCodepointBitmapSubpixel, but prefiltering
+// is performed (see stbtt_PackSetOversampling)
+
+STBTT_DEF void stbtt_GetCodepointBitmapBox(const stbtt_fontinfo *font, int codepoint, float scale_x, float scale_y, int *ix0, int *iy0, int *ix1, int *iy1);
+// get the bbox of the bitmap centered around the glyph origin; so the
+// bitmap width is ix1-ix0, height is iy1-iy0, and location to place
+// the bitmap top left is (leftSideBearing*scale,iy0).
+// (Note that the bitmap uses y-increases-down, but the shape uses
+// y-increases-up, so CodepointBitmapBox and CodepointBox are inverted.)
+
+STBTT_DEF void stbtt_GetCodepointBitmapBoxSubpixel(const stbtt_fontinfo *font, int codepoint, float scale_x, float scale_y, float shift_x, float shift_y, int *ix0, int *iy0, int *ix1, int *iy1);
+// same as stbtt_GetCodepointBitmapBox, but you can specify a subpixel
+// shift for the character
+
+// the following functions are equivalent to the above functions, but operate
+// on glyph indices instead of Unicode codepoints (for efficiency)
+STBTT_DEF unsigned char *stbtt_GetGlyphBitmap(const stbtt_fontinfo *info, float scale_x, float scale_y, int glyph, int *width, int *height, int *xoff, int *yoff);
+STBTT_DEF unsigned char *stbtt_GetGlyphBitmapSubpixel(const stbtt_fontinfo *info, float scale_x, float scale_y, float shift_x, float shift_y, int glyph, int *width, int *height, int *xoff, int *yoff);
+STBTT_DEF void stbtt_MakeGlyphBitmap(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, int glyph);
+STBTT_DEF void stbtt_MakeGlyphBitmapSubpixel(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, float shift_x, float shift_y, int glyph);
+STBTT_DEF void stbtt_MakeGlyphBitmapSubpixelPrefilter(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, float shift_x, float shift_y, int oversample_x, int oversample_y, float *sub_x, float *sub_y, int glyph);
+STBTT_DEF void stbtt_GetGlyphBitmapBox(const stbtt_fontinfo *font, int glyph, float scale_x, float scale_y, int *ix0, int *iy0, int *ix1, int *iy1);
+STBTT_DEF void stbtt_GetGlyphBitmapBoxSubpixel(const stbtt_fontinfo *font, int glyph, float scale_x, float scale_y,float shift_x, float shift_y, int *ix0, int *iy0, int *ix1, int *iy1);
+
+
+// @TODO: don't expose this structure
+typedef struct
+{
+   int w,h,stride;
+   unsigned char *pixels;
+} stbtt__bitmap;
+
+// rasterize a shape with quadratic beziers into a bitmap
+STBTT_DEF void stbtt_Rasterize(stbtt__bitmap *result,        // 1-channel bitmap to draw into
+                               float flatness_in_pixels,     // allowable error of curve in pixels
+                               stbtt_vertex *vertices,       // array of vertices defining shape
+                               int num_verts,                // number of vertices in above array
+                               float scale_x, float scale_y, // scale applied to input vertices
+                               float shift_x, float shift_y, // translation applied to input vertices
+                               int x_off, int y_off,         // another translation applied to input
+                               int invert,                   // if non-zero, vertically flip shape
+                               void *userdata);              // context for to STBTT_MALLOC
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// Signed Distance Function (or Field) rendering
+
+STBTT_DEF void stbtt_FreeSDF(unsigned char *bitmap, void *userdata);
+// frees the SDF bitmap allocated below
+
+STBTT_DEF unsigned char * stbtt_GetGlyphSDF(const stbtt_fontinfo *info, float scale, int glyph, int padding, unsigned char onedge_value, float pixel_dist_scale, int *width, int *height, int *xoff, int *yoff);
+STBTT_DEF unsigned char * stbtt_GetCodepointSDF(const stbtt_fontinfo *info, float scale, int codepoint, int padding, unsigned char onedge_value, float pixel_dist_scale, int *width, int *height, int *xoff, int *yoff);
+// These functions compute a discretized SDF field for a single character, suitable for storing
+// in a single-channel texture, sampling with bilinear filtering, and testing against
+// larger than some threshold to produce scalable fonts.
+//        info              --  the font
+//        scale             --  controls the size of the resulting SDF bitmap, same as it would be creating a regular bitmap
+//        glyph/codepoint   --  the character to generate the SDF for
+//        padding           --  extra "pixels" around the character which are filled with the distance to the character (not 0),
+//                                 which allows effects like bit outlines
+//        onedge_value      --  value 0-255 to test the SDF against to reconstruct the character (i.e. the isocontour of the character)
+//        pixel_dist_scale  --  what value the SDF should increase by when moving one SDF "pixel" away from the edge (on the 0..255 scale)
+//                                 if positive, > onedge_value is inside; if negative, < onedge_value is inside
+//        width,height      --  output height & width of the SDF bitmap (including padding)
+//        xoff,yoff         --  output origin of the character
+//        return value      --  a 2D array of bytes 0..255, width*height in size
+//
+// pixel_dist_scale & onedge_value are a scale & bias that allows you to make
+// optimal use of the limited 0..255 for your application, trading off precision
+// and special effects. SDF values outside the range 0..255 are clamped to 0..255.
+//
+// Example:
+//      scale = stbtt_ScaleForPixelHeight(22)
+//      padding = 5
+//      onedge_value = 180
+//      pixel_dist_scale = 180/5.0 = 36.0
+//
+//      This will create an SDF bitmap in which the character is about 22 pixels
+//      high but the whole bitmap is about 22+5+5=32 pixels high. To produce a filled
+//      shape, sample the SDF at each pixel and fill the pixel if the SDF value
+//      is greater than or equal to 180/255. (You'll actually want to antialias,
+//      which is beyond the scope of this example.) Additionally, you can compute
+//      offset outlines (e.g. to stroke the character border inside & outside,
+//      or only outside). For example, to fill outside the character up to 3 SDF
+//      pixels, you would compare against (180-36.0*3)/255 = 72/255. The above
+//      choice of variables maps a range from 5 pixels outside the shape to
+//      2 pixels inside the shape to 0..255; this is intended primarily for apply
+//      outside effects only (the interior range is needed to allow proper
+//      antialiasing of the font at *smaller* sizes)
+//
+// The function computes the SDF analytically at each SDF pixel, not by e.g.
+// building a higher-res bitmap and approximating it. In theory the quality
+// should be as high as possible for an SDF of this size & representation, but
+// unclear if this is true in practice (perhaps building a higher-res bitmap
+// and computing from that can allow drop-out prevention).
+//
+// The algorithm has not been optimized at all, so expect it to be slow
+// if computing lots of characters or very large sizes.
+
+
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// Finding the right font...
+//
+// You should really just solve this offline, keep your own tables
+// of what font is what, and don't try to get it out of the .ttf file.
+// That's because getting it out of the .ttf file is really hard, because
+// the names in the file can appear in many possible encodings, in many
+// possible languages, and e.g. if you need a case-insensitive comparison,
+// the details of that depend on the encoding & language in a complex way
+// (actually underspecified in truetype, but also gigantic).
+//
+// But you can use the provided functions in two possible ways:
+//     stbtt_FindMatchingFont() will use *case-sensitive* comparisons on
+//             unicode-encoded names to try to find the font you want;
+//             you can run this before calling stbtt_InitFont()
+//
+//     stbtt_GetFontNameString() lets you get any of the various strings
+//             from the file yourself and do your own comparisons on them.
+//             You have to have called stbtt_InitFont() first.
+
+
+STBTT_DEF int stbtt_FindMatchingFont(const unsigned char *fontdata, const char *name, int flags);
+// returns the offset (not index) of the font that matches, or -1 if none
+//   if you use STBTT_MACSTYLE_DONTCARE, use a font name like "Arial Bold".
+//   if you use any other flag, use a font name like "Arial"; this checks
+//     the 'macStyle' header field; i don't know if fonts set this consistently
+#define STBTT_MACSTYLE_DONTCARE     0
+#define STBTT_MACSTYLE_BOLD         1
+#define STBTT_MACSTYLE_ITALIC       2
+#define STBTT_MACSTYLE_UNDERSCORE   4
+#define STBTT_MACSTYLE_NONE         8   // <= not same as 0, this makes us check the bitfield is 0
+
+STBTT_DEF int stbtt_CompareUTF8toUTF16_bigendian(const char *s1, int len1, const char *s2, int len2);
+// returns 1/0 whether the first string interpreted as utf8 is identical to
+// the second string interpreted as big-endian utf16... useful for strings from next func
+
+STBTT_DEF const char *stbtt_GetFontNameString(const stbtt_fontinfo *font, int *length, int platformID, int encodingID, int languageID, int nameID);
+// returns the string (which may be big-endian double byte, e.g. for unicode)
+// and puts the length in bytes in *length.
+//
+// some of the values for the IDs are below; for more see the truetype spec:
+//     http://developer.apple.com/textfonts/TTRefMan/RM06/Chap6name.html
+//     http://www.microsoft.com/typography/otspec/name.htm
+
+enum { // platformID
+   STBTT_PLATFORM_ID_UNICODE   =0,
+   STBTT_PLATFORM_ID_MAC       =1,
+   STBTT_PLATFORM_ID_ISO       =2,
+   STBTT_PLATFORM_ID_MICROSOFT =3
+};
+
+enum { // encodingID for STBTT_PLATFORM_ID_UNICODE
+   STBTT_UNICODE_EID_UNICODE_1_0    =0,
+   STBTT_UNICODE_EID_UNICODE_1_1    =1,
+   STBTT_UNICODE_EID_ISO_10646      =2,
+   STBTT_UNICODE_EID_UNICODE_2_0_BMP=3,
+   STBTT_UNICODE_EID_UNICODE_2_0_FULL=4
+};
+
+enum { // encodingID for STBTT_PLATFORM_ID_MICROSOFT
+   STBTT_MS_EID_SYMBOL        =0,
+   STBTT_MS_EID_UNICODE_BMP   =1,
+   STBTT_MS_EID_SHIFTJIS      =2,
+   STBTT_MS_EID_UNICODE_FULL  =10
+};
+
+enum { // encodingID for STBTT_PLATFORM_ID_MAC; same as Script Manager codes
+   STBTT_MAC_EID_ROMAN        =0,   STBTT_MAC_EID_ARABIC       =4,
+   STBTT_MAC_EID_JAPANESE     =1,   STBTT_MAC_EID_HEBREW       =5,
+   STBTT_MAC_EID_CHINESE_TRAD =2,   STBTT_MAC_EID_GREEK        =6,
+   STBTT_MAC_EID_KOREAN       =3,   STBTT_MAC_EID_RUSSIAN      =7
+};
+
+enum { // languageID for STBTT_PLATFORM_ID_MICROSOFT; same as LCID...
+       // problematic because there are e.g. 16 english LCIDs and 16 arabic LCIDs
+   STBTT_MS_LANG_ENGLISH     =0x0409,   STBTT_MS_LANG_ITALIAN     =0x0410,
+   STBTT_MS_LANG_CHINESE     =0x0804,   STBTT_MS_LANG_JAPANESE    =0x0411,
+   STBTT_MS_LANG_DUTCH       =0x0413,   STBTT_MS_LANG_KOREAN      =0x0412,
+   STBTT_MS_LANG_FRENCH      =0x040c,   STBTT_MS_LANG_RUSSIAN     =0x0419,
+   STBTT_MS_LANG_GERMAN      =0x0407,   STBTT_MS_LANG_SPANISH     =0x0409,
+   STBTT_MS_LANG_HEBREW      =0x040d,   STBTT_MS_LANG_SWEDISH     =0x041D
+};
+
+enum { // languageID for STBTT_PLATFORM_ID_MAC
+   STBTT_MAC_LANG_ENGLISH      =0 ,   STBTT_MAC_LANG_JAPANESE     =11,
+   STBTT_MAC_LANG_ARABIC       =12,   STBTT_MAC_LANG_KOREAN       =23,
+   STBTT_MAC_LANG_DUTCH        =4 ,   STBTT_MAC_LANG_RUSSIAN      =32,
+   STBTT_MAC_LANG_FRENCH       =1 ,   STBTT_MAC_LANG_SPANISH      =6 ,
+   STBTT_MAC_LANG_GERMAN       =2 ,   STBTT_MAC_LANG_SWEDISH      =5 ,
+   STBTT_MAC_LANG_HEBREW       =10,   STBTT_MAC_LANG_CHINESE_SIMPLIFIED =33,
+   STBTT_MAC_LANG_ITALIAN      =3 ,   STBTT_MAC_LANG_CHINESE_TRAD =19
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __STB_INCLUDE_STB_TRUETYPE_H__
+
+///////////////////////////////////////////////////////////////////////////////
+///////////////////////////////////////////////////////////////////////////////
+////
+////   IMPLEMENTATION
+////
+////
+
+#ifdef STB_TRUETYPE_IMPLEMENTATION
+
+#ifndef STBTT_MAX_OVERSAMPLE
+#define STBTT_MAX_OVERSAMPLE   8
+#endif
+
+#if STBTT_MAX_OVERSAMPLE > 255
+#error "STBTT_MAX_OVERSAMPLE cannot be > 255"
+#endif
+
+typedef int stbtt__test_oversample_pow2[(STBTT_MAX_OVERSAMPLE & (STBTT_MAX_OVERSAMPLE-1)) == 0 ? 1 : -1];
+
+#ifndef STBTT_RASTERIZER_VERSION
+#define STBTT_RASTERIZER_VERSION 2
+#endif
+
+#ifdef _MSC_VER
+#define STBTT__NOTUSED(v)  (void)(v)
+#else
+#define STBTT__NOTUSED(v)  (void)sizeof(v)
+#endif
+
+//////////////////////////////////////////////////////////////////////////
+//
+// stbtt__buf helpers to parse data from file
+//
+
+static stbtt_uint8 stbtt__buf_get8(stbtt__buf *b)
+{
+   if (b->cursor >= b->size)
+      return 0;
+   return b->data[b->cursor++];
+}
+
+static stbtt_uint8 stbtt__buf_peek8(stbtt__buf *b)
+{
+   if (b->cursor >= b->size)
+      return 0;
+   return b->data[b->cursor];
+}
+
+static void stbtt__buf_seek(stbtt__buf *b, int o)
+{
+   STBTT_assert(!(o > b->size || o < 0));
+   b->cursor = (o > b->size || o < 0) ? b->size : o;
+}
+
+static void stbtt__buf_skip(stbtt__buf *b, int o)
+{
+   stbtt__buf_seek(b, b->cursor + o);
+}
+
+static stbtt_uint32 stbtt__buf_get(stbtt__buf *b, int n)
+{
+   stbtt_uint32 v = 0;
+   int i;
+   STBTT_assert(n >= 1 && n <= 4);
+   for (i = 0; i < n; i++)
+      v = (v << 8) | stbtt__buf_get8(b);
+   return v;
+}
+
+static stbtt__buf stbtt__new_buf(const void *p, size_t size)
+{
+   stbtt__buf r;
+   STBTT_assert(size < 0x40000000);
+   r.data = (stbtt_uint8*) p;
+   r.size = (int) size;
+   r.cursor = 0;
+   return r;
+}
+
+#define stbtt__buf_get16(b)  stbtt__buf_get((b), 2)
+#define stbtt__buf_get32(b)  stbtt__buf_get((b), 4)
+
+static stbtt__buf stbtt__buf_range(const stbtt__buf *b, int o, int s)
+{
+   stbtt__buf r = stbtt__new_buf(NULL, 0);
+   if (o < 0 || s < 0 || o > b->size || s > b->size - o) return r;
+   r.data = b->data + o;
+   r.size = s;
+   return r;
+}
+
+static stbtt__buf stbtt__cff_get_index(stbtt__buf *b)
+{
+   int count, start, offsize;
+   start = b->cursor;
+   count = stbtt__buf_get16(b);
+   if (count) {
+      offsize = stbtt__buf_get8(b);
+      STBTT_assert(offsize >= 1 && offsize <= 4);
+      stbtt__buf_skip(b, offsize * count);
+      stbtt__buf_skip(b, stbtt__buf_get(b, offsize) - 1);
+   }
+   return stbtt__buf_range(b, start, b->cursor - start);
+}
+
+static stbtt_uint32 stbtt__cff_int(stbtt__buf *b)
+{
+   int b0 = stbtt__buf_get8(b);
+   if (b0 >= 32 && b0 <= 246)       return b0 - 139;
+   else if (b0 >= 247 && b0 <= 250) return (b0 - 247)*256 + stbtt__buf_get8(b) + 108;
+   else if (b0 >= 251 && b0 <= 254) return -(b0 - 251)*256 - stbtt__buf_get8(b) - 108;
+   else if (b0 == 28)               return stbtt__buf_get16(b);
+   else if (b0 == 29)               return stbtt__buf_get32(b);
+   STBTT_assert(0);
+   return 0;
+}
+
+static void stbtt__cff_skip_operand(stbtt__buf *b) {
+   int v, b0 = stbtt__buf_peek8(b);
+   STBTT_assert(b0 >= 28);
+   if (b0 == 30) {
+      stbtt__buf_skip(b, 1);
+      while (b->cursor < b->size) {
+         v = stbtt__buf_get8(b);
+         if ((v & 0xF) == 0xF || (v >> 4) == 0xF)
+            break;
+      }
+   } else {
+      stbtt__cff_int(b);
+   }
+}
+
+static stbtt__buf stbtt__dict_get(stbtt__buf *b, int key)
+{
+   stbtt__buf_seek(b, 0);
+   while (b->cursor < b->size) {
+      int start = b->cursor, end, op;
+      while (stbtt__buf_peek8(b) >= 28)
+         stbtt__cff_skip_operand(b);
+      end = b->cursor;
+      op = stbtt__buf_get8(b);
+      if (op == 12)  op = stbtt__buf_get8(b) | 0x100;
+      if (op == key) return stbtt__buf_range(b, start, end-start);
+   }
+   return stbtt__buf_range(b, 0, 0);
+}
+
+static void stbtt__dict_get_ints(stbtt__buf *b, int key, int outcount, stbtt_uint32 *out)
+{
+   int i;
+   stbtt__buf operands = stbtt__dict_get(b, key);
+   for (i = 0; i < outcount && operands.cursor < operands.size; i++)
+      out[i] = stbtt__cff_int(&operands);
+}
+
+static int stbtt__cff_index_count(stbtt__buf *b)
+{
+   stbtt__buf_seek(b, 0);
+   return stbtt__buf_get16(b);
+}
+
+static stbtt__buf stbtt__cff_index_get(stbtt__buf b, int i)
+{
+   int count, offsize, start, end;
+   stbtt__buf_seek(&b, 0);
+   count = stbtt__buf_get16(&b);
+   offsize = stbtt__buf_get8(&b);
+   STBTT_assert(i >= 0 && i < count);
+   STBTT_assert(offsize >= 1 && offsize <= 4);
+   stbtt__buf_skip(&b, i*offsize);
+   start = stbtt__buf_get(&b, offsize);
+   end = stbtt__buf_get(&b, offsize);
+   return stbtt__buf_range(&b, 2+(count+1)*offsize+start, end - start);
+}
+
+//////////////////////////////////////////////////////////////////////////
+//
+// accessors to parse data from file
+//
+
+// on platforms that don't allow misaligned reads, if we want to allow
+// truetype fonts that aren't padded to alignment, define ALLOW_UNALIGNED_TRUETYPE
+
+#define ttBYTE(p)     (* (stbtt_uint8 *) (p))
+#define ttCHAR(p)     (* (stbtt_int8 *) (p))
+#define ttFixed(p)    ttLONG(p)
+
+static stbtt_uint16 ttUSHORT(stbtt_uint8 *p) { return p[0]*256 + p[1]; }
+static stbtt_int16 ttSHORT(stbtt_uint8 *p)   { return p[0]*256 + p[1]; }
+static stbtt_uint32 ttULONG(stbtt_uint8 *p)  { return (p[0]<<24) + (p[1]<<16) + (p[2]<<8) + p[3]; }
+static stbtt_int32 ttLONG(stbtt_uint8 *p)    { return (p[0]<<24) + (p[1]<<16) + (p[2]<<8) + p[3]; }
+
+#define stbtt_tag4(p,c0,c1,c2,c3) ((p)[0] == (c0) && (p)[1] == (c1) && (p)[2] == (c2) && (p)[3] == (c3))
+#define stbtt_tag(p,str)           stbtt_tag4(p,str[0],str[1],str[2],str[3])
+
+static int stbtt__isfont(stbtt_uint8 *font)
+{
+   // check the version number
+   if (stbtt_tag4(font, '1',0,0,0))  return 1; // TrueType 1
+   if (stbtt_tag(font, "typ1"))   return 1; // TrueType with type 1 font -- we don't support this!
+   if (stbtt_tag(font, "OTTO"))   return 1; // OpenType with CFF
+   if (stbtt_tag4(font, 0,1,0,0)) return 1; // OpenType 1.0
+   if (stbtt_tag(font, "true"))   return 1; // Apple specification for TrueType fonts
+   return 0;
+}
+
+// @OPTIMIZE: binary search
+static stbtt_uint32 stbtt__find_table(stbtt_uint8 *data, stbtt_uint32 fontstart, const char *tag)
+{
+   stbtt_int32 num_tables = ttUSHORT(data+fontstart+4);
+   stbtt_uint32 tabledir = fontstart + 12;
+   stbtt_int32 i;
+   for (i=0; i < num_tables; ++i) {
+      stbtt_uint32 loc = tabledir + 16*i;
+      if (stbtt_tag(data+loc+0, tag))
+         return ttULONG(data+loc+8);
+   }
+   return 0;
+}
+
+static int stbtt_GetFontOffsetForIndex_internal(unsigned char *font_collection, int index)
+{
+   // if it's just a font, there's only one valid index
+   if (stbtt__isfont(font_collection))
+      return index == 0 ? 0 : -1;
+
+   // check if it's a TTC
+   if (stbtt_tag(font_collection, "ttcf")) {
+      // version 1?
+      if (ttULONG(font_collection+4) == 0x00010000 || ttULONG(font_collection+4) == 0x00020000) {
+         stbtt_int32 n = ttLONG(font_collection+8);
+         if (index >= n)
+            return -1;
+         return ttULONG(font_collection+12+index*4);
+      }
+   }
+   return -1;
+}
+
+static int stbtt_GetNumberOfFonts_internal(unsigned char *font_collection)
+{
+   // if it's just a font, there's only one valid font
+   if (stbtt__isfont(font_collection))
+      return 1;
+
+   // check if it's a TTC
+   if (stbtt_tag(font_collection, "ttcf")) {
+      // version 1?
+      if (ttULONG(font_collection+4) == 0x00010000 || ttULONG(font_collection+4) == 0x00020000) {
+         return ttLONG(font_collection+8);
+      }
+   }
+   return 0;
+}
+
+static stbtt__buf stbtt__get_subrs(stbtt__buf cff, stbtt__buf fontdict)
+{
+   stbtt_uint32 subrsoff = 0, private_loc[2] = { 0, 0 };
+   stbtt__buf pdict;
+   stbtt__dict_get_ints(&fontdict, 18, 2, private_loc);
+   if (!private_loc[1] || !private_loc[0]) return stbtt__new_buf(NULL, 0);
+   pdict = stbtt__buf_range(&cff, private_loc[1], private_loc[0]);
+   stbtt__dict_get_ints(&pdict, 19, 1, &subrsoff);
+   if (!subrsoff) return stbtt__new_buf(NULL, 0);
+   stbtt__buf_seek(&cff, private_loc[1]+subrsoff);
+   return stbtt__cff_get_index(&cff);
+}
+
+// since most people won't use this, find this table the first time it's needed
+static int stbtt__get_svg(stbtt_fontinfo *info)
+{
+   stbtt_uint32 t;
+   if (info->svg < 0) {
+      t = stbtt__find_table(info->data, info->fontstart, "SVG ");
+      if (t) {
+         stbtt_uint32 offset = ttULONG(info->data + t + 2);
+         info->svg = t + offset;
+      } else {
+         info->svg = 0;
+      }
+   }
+   return info->svg;
+}
+
+static int stbtt_InitFont_internal(stbtt_fontinfo *info, unsigned char *data, int fontstart)
+{
+   stbtt_uint32 cmap, t;
+   stbtt_int32 i,numTables;
+
+   info->data = data;
+   info->fontstart = fontstart;
+   info->cff = stbtt__new_buf(NULL, 0);
+
+   cmap = stbtt__find_table(data, fontstart, "cmap");       // required
+   info->loca = stbtt__find_table(data, fontstart, "loca"); // required
+   info->head = stbtt__find_table(data, fontstart, "head"); // required
+   info->glyf = stbtt__find_table(data, fontstart, "glyf"); // required
+   info->hhea = stbtt__find_table(data, fontstart, "hhea"); // required
+   info->hmtx = stbtt__find_table(data, fontstart, "hmtx"); // required
+   info->kern = stbtt__find_table(data, fontstart, "kern"); // not required
+   info->gpos = stbtt__find_table(data, fontstart, "GPOS"); // not required
+
+   if (!cmap || !info->head || !info->hhea || !info->hmtx)
+      return 0;
+   if (info->glyf) {
+      // required for truetype
+      if (!info->loca) return 0;
+   } else {
+      // initialization for CFF / Type2 fonts (OTF)
+      stbtt__buf b, topdict, topdictidx;
+      stbtt_uint32 cstype = 2, charstrings = 0, fdarrayoff = 0, fdselectoff = 0;
+      stbtt_uint32 cff;
+
+      cff = stbtt__find_table(data, fontstart, "CFF ");
+      if (!cff) return 0;
+
+      info->fontdicts = stbtt__new_buf(NULL, 0);
+      info->fdselect = stbtt__new_buf(NULL, 0);
+
+      // @TODO this should use size from table (not 512MB)
+      info->cff = stbtt__new_buf(data+cff, 512*1024*1024);
+      b = info->cff;
+
+      // read the header
+      stbtt__buf_skip(&b, 2);
+      stbtt__buf_seek(&b, stbtt__buf_get8(&b)); // hdrsize
+
+      // @TODO the name INDEX could list multiple fonts,
+      // but we just use the first one.
+      stbtt__cff_get_index(&b);  // name INDEX
+      topdictidx = stbtt__cff_get_index(&b);
+      topdict = stbtt__cff_index_get(topdictidx, 0);
+      stbtt__cff_get_index(&b);  // string INDEX
+      info->gsubrs = stbtt__cff_get_index(&b);
+
+      stbtt__dict_get_ints(&topdict, 17, 1, &charstrings);
+      stbtt__dict_get_ints(&topdict, 0x100 | 6, 1, &cstype);
+      stbtt__dict_get_ints(&topdict, 0x100 | 36, 1, &fdarrayoff);
+      stbtt__dict_get_ints(&topdict, 0x100 | 37, 1, &fdselectoff);
+      info->subrs = stbtt__get_subrs(b, topdict);
+
+      // we only support Type 2 charstrings
+      if (cstype != 2) return 0;
+      if (charstrings == 0) return 0;
+
+      if (fdarrayoff) {
+         // looks like a CID font
+         if (!fdselectoff) return 0;
+         stbtt__buf_seek(&b, fdarrayoff);
+         info->fontdicts = stbtt__cff_get_index(&b);
+         info->fdselect = stbtt__buf_range(&b, fdselectoff, b.size-fdselectoff);
+      }
+
+      stbtt__buf_seek(&b, charstrings);
+      info->charstrings = stbtt__cff_get_index(&b);
+   }
+
+   t = stbtt__find_table(data, fontstart, "maxp");
+   if (t)
+      info->numGlyphs = ttUSHORT(data+t+4);
+   else
+      info->numGlyphs = 0xffff;
+
+   info->svg = -1;
+
+   // find a cmap encoding table we understand *now* to avoid searching
+   // later. (todo: could make this installable)
+   // the same regardless of glyph.
+   numTables = ttUSHORT(data + cmap + 2);
+   info->index_map = 0;
+   for (i=0; i < numTables; ++i) {
+      stbtt_uint32 encoding_record = cmap + 4 + 8 * i;
+      // find an encoding we understand:
+      switch(ttUSHORT(data+encoding_record)) {
+         case STBTT_PLATFORM_ID_MICROSOFT:
+            switch (ttUSHORT(data+encoding_record+2)) {
+               case STBTT_MS_EID_UNICODE_BMP:
+               case STBTT_MS_EID_UNICODE_FULL:
+                  // MS/Unicode
+                  info->index_map = cmap + ttULONG(data+encoding_record+4);
+                  break;
+            }
+            break;
+        case STBTT_PLATFORM_ID_UNICODE:
+            // Mac/iOS has these
+            // all the encodingIDs are unicode, so we don't bother to check it
+            info->index_map = cmap + ttULONG(data+encoding_record+4);
+            break;
+      }
+   }
+   if (info->index_map == 0)
+      return 0;
+
+   info->indexToLocFormat = ttUSHORT(data+info->head + 50);
+   return 1;
+}
+
+STBTT_DEF int stbtt_FindGlyphIndex(const stbtt_fontinfo *info, int unicode_codepoint)
+{
+   stbtt_uint8 *data = info->data;
+   stbtt_uint32 index_map = info->index_map;
+
+   stbtt_uint16 format = ttUSHORT(data + index_map + 0);
+   if (format == 0) { // apple byte encoding
+      stbtt_int32 bytes = ttUSHORT(data + index_map + 2);
+      if (unicode_codepoint < bytes-6)
+         return ttBYTE(data + index_map + 6 + unicode_codepoint);
+      return 0;
+   } else if (format == 6) {
+      stbtt_uint32 first = ttUSHORT(data + index_map + 6);
+      stbtt_uint32 count = ttUSHORT(data + index_map + 8);
+      if ((stbtt_uint32) unicode_codepoint >= first && (stbtt_uint32) unicode_codepoint < first+count)
+         return ttUSHORT(data + index_map + 10 + (unicode_codepoint - first)*2);
+      return 0;
+   } else if (format == 2) {
+      STBTT_assert(0); // @TODO: high-byte mapping for japanese/chinese/korean
+      return 0;
+   } else if (format == 4) { // standard mapping for windows fonts: binary search collection of ranges
+      stbtt_uint16 segcount = ttUSHORT(data+index_map+6) >> 1;
+      stbtt_uint16 searchRange = ttUSHORT(data+index_map+8) >> 1;
+      stbtt_uint16 entrySelector = ttUSHORT(data+index_map+10);
+      stbtt_uint16 rangeShift = ttUSHORT(data+index_map+12) >> 1;
+
+      // do a binary search of the segments
+      stbtt_uint32 endCount = index_map + 14;
+      stbtt_uint32 search = endCount;
+
+      if (unicode_codepoint > 0xffff)
+         return 0;
+
+      // they lie from endCount .. endCount + segCount
+      // but searchRange is the nearest power of two, so...
+      if (unicode_codepoint >= ttUSHORT(data + search + rangeShift*2))
+         search += rangeShift*2;
+
+      // now decrement to bias correctly to find smallest
+      search -= 2;
+      while (entrySelector) {
+         stbtt_uint16 end;
+         searchRange >>= 1;
+         end = ttUSHORT(data + search + searchRange*2);
+         if (unicode_codepoint > end)
+            search += searchRange*2;
+         --entrySelector;
+      }
+      search += 2;
+
+      {
+         stbtt_uint16 offset, start;
+         stbtt_uint16 item = (stbtt_uint16) ((search - endCount) >> 1);
+
+         STBTT_assert(unicode_codepoint <= ttUSHORT(data + endCount + 2*item));
+         start = ttUSHORT(data + index_map + 14 + segcount*2 + 2 + 2*item);
+         if (unicode_codepoint < start)
+            return 0;
+
+         offset = ttUSHORT(data + index_map + 14 + segcount*6 + 2 + 2*item);
+         if (offset == 0)
+            return (stbtt_uint16) (unicode_codepoint + ttSHORT(data + index_map + 14 + segcount*4 + 2 + 2*item));
+
+         return ttUSHORT(data + offset + (unicode_codepoint-start)*2 + index_map + 14 + segcount*6 + 2 + 2*item);
+      }
+   } else if (format == 12 || format == 13) {
+      stbtt_uint32 ngroups = ttULONG(data+index_map+12);
+      stbtt_int32 low,high;
+      low = 0; high = (stbtt_int32)ngroups;
+      // Binary search the right group.
+      while (low < high) {
+         stbtt_int32 mid = low + ((high-low) >> 1); // rounds down, so low <= mid < high
+         stbtt_uint32 start_char = ttULONG(data+index_map+16+mid*12);
+         stbtt_uint32 end_char = ttULONG(data+index_map+16+mid*12+4);
+         if ((stbtt_uint32) unicode_codepoint < start_char)
+            high = mid;
+         else if ((stbtt_uint32) unicode_codepoint > end_char)
+            low = mid+1;
+         else {
+            stbtt_uint32 start_glyph = ttULONG(data+index_map+16+mid*12+8);
+            if (format == 12)
+               return start_glyph + unicode_codepoint-start_char;
+            else // format == 13
+               return start_glyph;
+         }
+      }
+      return 0; // not found
+   }
+   // @TODO
+   STBTT_assert(0);
+   return 0;
+}
+
+STBTT_DEF int stbtt_GetCodepointShape(const stbtt_fontinfo *info, int unicode_codepoint, stbtt_vertex **vertices)
+{
+   return stbtt_GetGlyphShape(info, stbtt_FindGlyphIndex(info, unicode_codepoint), vertices);
+}
+
+static void stbtt_setvertex(stbtt_vertex *v, stbtt_uint8 type, stbtt_int32 x, stbtt_int32 y, stbtt_int32 cx, stbtt_int32 cy)
+{
+   v->type = type;
+   v->x = (stbtt_int16) x;
+   v->y = (stbtt_int16) y;
+   v->cx = (stbtt_int16) cx;
+   v->cy = (stbtt_int16) cy;
+}
+
+static int stbtt__GetGlyfOffset(const stbtt_fontinfo *info, int glyph_index)
+{
+   int g1,g2;
+
+   STBTT_assert(!info->cff.size);
+
+   if (glyph_index >= info->numGlyphs) return -1; // glyph index out of range
+   if (info->indexToLocFormat >= 2)    return -1; // unknown index->glyph map format
+
+   if (info->indexToLocFormat == 0) {
+      g1 = info->glyf + ttUSHORT(info->data + info->loca + glyph_index * 2) * 2;
+      g2 = info->glyf + ttUSHORT(info->data + info->loca + glyph_index * 2 + 2) * 2;
+   } else {
+      g1 = info->glyf + ttULONG (info->data + info->loca + glyph_index * 4);
+      g2 = info->glyf + ttULONG (info->data + info->loca + glyph_index * 4 + 4);
+   }
+
+   return g1==g2 ? -1 : g1; // if length is 0, return -1
+}
+
+static int stbtt__GetGlyphInfoT2(const stbtt_fontinfo *info, int glyph_index, int *x0, int *y0, int *x1, int *y1);
+
+STBTT_DEF int stbtt_GetGlyphBox(const stbtt_fontinfo *info, int glyph_index, int *x0, int *y0, int *x1, int *y1)
+{
+   if (info->cff.size) {
+      stbtt__GetGlyphInfoT2(info, glyph_index, x0, y0, x1, y1);
+   } else {
+      int g = stbtt__GetGlyfOffset(info, glyph_index);
+      if (g < 0) return 0;
+
+      if (x0) *x0 = ttSHORT(info->data + g + 2);
+      if (y0) *y0 = ttSHORT(info->data + g + 4);
+      if (x1) *x1 = ttSHORT(info->data + g + 6);
+      if (y1) *y1 = ttSHORT(info->data + g + 8);
+   }
+   return 1;
+}
+
+STBTT_DEF int stbtt_GetCodepointBox(const stbtt_fontinfo *info, int codepoint, int *x0, int *y0, int *x1, int *y1)
+{
+   return stbtt_GetGlyphBox(info, stbtt_FindGlyphIndex(info,codepoint), x0,y0,x1,y1);
+}
+
+STBTT_DEF int stbtt_IsGlyphEmpty(const stbtt_fontinfo *info, int glyph_index)
+{
+   stbtt_int16 numberOfContours;
+   int g;
+   if (info->cff.size)
+      return stbtt__GetGlyphInfoT2(info, glyph_index, NULL, NULL, NULL, NULL) == 0;
+   g = stbtt__GetGlyfOffset(info, glyph_index);
+   if (g < 0) return 1;
+   numberOfContours = ttSHORT(info->data + g);
+   return numberOfContours == 0;
+}
+
+static int stbtt__close_shape(stbtt_vertex *vertices, int num_vertices, int was_off, int start_off,
+    stbtt_int32 sx, stbtt_int32 sy, stbtt_int32 scx, stbtt_int32 scy, stbtt_int32 cx, stbtt_int32 cy)
+{
+   if (start_off) {
+      if (was_off)
+         stbtt_setvertex(&vertices[num_vertices++], STBTT_vcurve, (cx+scx)>>1, (cy+scy)>>1, cx,cy);
+      stbtt_setvertex(&vertices[num_vertices++], STBTT_vcurve, sx,sy,scx,scy);
+   } else {
+      if (was_off)
+         stbtt_setvertex(&vertices[num_vertices++], STBTT_vcurve,sx,sy,cx,cy);
+      else
+         stbtt_setvertex(&vertices[num_vertices++], STBTT_vline,sx,sy,0,0);
+   }
+   return num_vertices;
+}
+
+static int stbtt__GetGlyphShapeTT(const stbtt_fontinfo *info, int glyph_index, stbtt_vertex **pvertices)
+{
+   stbtt_int16 numberOfContours;
+   stbtt_uint8 *endPtsOfContours;
+   stbtt_uint8 *data = info->data;
+   stbtt_vertex *vertices=0;
+   int num_vertices=0;
+   int g = stbtt__GetGlyfOffset(info, glyph_index);
+
+   *pvertices = NULL;
+
+   if (g < 0) return 0;
+
+   numberOfContours = ttSHORT(data + g);
+
+   if (numberOfContours > 0) {
+      stbtt_uint8 flags=0,flagcount;
+      stbtt_int32 ins, i,j=0,m,n, next_move, was_off=0, off, start_off=0;
+      stbtt_int32 x,y,cx,cy,sx,sy, scx,scy;
+      stbtt_uint8 *points;
+      endPtsOfContours = (data + g + 10);
+      ins = ttUSHORT(data + g + 10 + numberOfContours * 2);
+      points = data + g + 10 + numberOfContours * 2 + 2 + ins;
+
+      n = 1+ttUSHORT(endPtsOfContours + numberOfContours*2-2);
+
+      m = n + 2*numberOfContours;  // a loose bound on how many vertices we might need
+      vertices = (stbtt_vertex *) STBTT_malloc(m * sizeof(vertices[0]), info->userdata);
+      if (vertices == 0)
+         return 0;
+
+      next_move = 0;
+      flagcount=0;
+
+      // in first pass, we load uninterpreted data into the allocated array
+      // above, shifted to the end of the array so we won't overwrite it when
+      // we create our final data starting from the front
+
+      off = m - n; // starting offset for uninterpreted data, regardless of how m ends up being calculated
+
+      // first load flags
+
+      for (i=0; i < n; ++i) {
+         if (flagcount == 0) {
+            flags = *points++;
+            if (flags & 8)
+               flagcount = *points++;
+         } else
+            --flagcount;
+         vertices[off+i].type = flags;
+      }
+
+      // now load x coordinates
+      x=0;
+      for (i=0; i < n; ++i) {
+         flags = vertices[off+i].type;
+         if (flags & 2) {
+            stbtt_int16 dx = *points++;
+            x += (flags & 16) ? dx : -dx; // ???
+         } else {
+            if (!(flags & 16)) {
+               x = x + (stbtt_int16) (points[0]*256 + points[1]);
+               points += 2;
+            }
+         }
+         vertices[off+i].x = (stbtt_int16) x;
+      }
+
+      // now load y coordinates
+      y=0;
+      for (i=0; i < n; ++i) {
+         flags = vertices[off+i].type;
+         if (flags & 4) {
+            stbtt_int16 dy = *points++;
+            y += (flags & 32) ? dy : -dy; // ???
+         } else {
+            if (!(flags & 32)) {
+               y = y + (stbtt_int16) (points[0]*256 + points[1]);
+               points += 2;
+            }
+         }
+         vertices[off+i].y = (stbtt_int16) y;
+      }
+
+      // now convert them to our format
+      num_vertices=0;
+      sx = sy = cx = cy = scx = scy = 0;
+      for (i=0; i < n; ++i) {
+         flags = vertices[off+i].type;
+         x     = (stbtt_int16) vertices[off+i].x;
+         y     = (stbtt_int16) vertices[off+i].y;
+
+         if (next_move == i) {
+            if (i != 0)
+               num_vertices = stbtt__close_shape(vertices, num_vertices, was_off, start_off, sx,sy,scx,scy,cx,cy);
+
+            // now start the new one
+            start_off = !(flags & 1);
+            if (start_off) {
+               // if we start off with an off-curve point, then when we need to find a point on the curve
+               // where we can start, and we need to save some state for when we wraparound.
+               scx = x;
+               scy = y;
+               if (!(vertices[off+i+1].type & 1)) {
+                  // next point is also a curve point, so interpolate an on-point curve
+                  sx = (x + (stbtt_int32) vertices[off+i+1].x) >> 1;
+                  sy = (y + (stbtt_int32) vertices[off+i+1].y) >> 1;
+               } else {
+                  // otherwise just use the next point as our start point
+                  sx = (stbtt_int32) vertices[off+i+1].x;
+                  sy = (stbtt_int32) vertices[off+i+1].y;
+                  ++i; // we're using point i+1 as the starting point, so skip it
+               }
+            } else {
+               sx = x;
+               sy = y;
+            }
+            stbtt_setvertex(&vertices[num_vertices++], STBTT_vmove,sx,sy,0,0);
+            was_off = 0;
+            next_move = 1 + ttUSHORT(endPtsOfContours+j*2);
+            ++j;
+         } else {
+            if (!(flags & 1)) { // if it's a curve
+               if (was_off) // two off-curve control points in a row means interpolate an on-curve midpoint
+                  stbtt_setvertex(&vertices[num_vertices++], STBTT_vcurve, (cx+x)>>1, (cy+y)>>1, cx, cy);
+               cx = x;
+               cy = y;
+               was_off = 1;
+            } else {
+               if (was_off)
+                  stbtt_setvertex(&vertices[num_vertices++], STBTT_vcurve, x,y, cx, cy);
+               else
+                  stbtt_setvertex(&vertices[num_vertices++], STBTT_vline, x,y,0,0);
+               was_off = 0;
+            }
+         }
+      }
+      num_vertices = stbtt__close_shape(vertices, num_vertices, was_off, start_off, sx,sy,scx,scy,cx,cy);
+   } else if (numberOfContours < 0) {
+      // Compound shapes.
+      int more = 1;
+      stbtt_uint8 *comp = data + g + 10;
+      num_vertices = 0;
+      vertices = 0;
+      while (more) {
+         stbtt_uint16 flags, gidx;
+         int comp_num_verts = 0, i;
+         stbtt_vertex *comp_verts = 0, *tmp = 0;
+         float mtx[6] = {1,0,0,1,0,0}, m, n;
+
+         flags = ttSHORT(comp); comp+=2;
+         gidx = ttSHORT(comp); comp+=2;
+
+         if (flags & 2) { // XY values
+            if (flags & 1) { // shorts
+               mtx[4] = ttSHORT(comp); comp+=2;
+               mtx[5] = ttSHORT(comp); comp+=2;
+            } else {
+               mtx[4] = ttCHAR(comp); comp+=1;
+               mtx[5] = ttCHAR(comp); comp+=1;
+            }
+         }
+         else {
+            // @TODO handle matching point
+            STBTT_assert(0);
+         }
+         if (flags & (1<<3)) { // WE_HAVE_A_SCALE
+            mtx[0] = mtx[3] = ttSHORT(comp)/16384.0f; comp+=2;
+            mtx[1] = mtx[2] = 0;
+         } else if (flags & (1<<6)) { // WE_HAVE_AN_X_AND_YSCALE
+            mtx[0] = ttSHORT(comp)/16384.0f; comp+=2;
+            mtx[1] = mtx[2] = 0;
+            mtx[3] = ttSHORT(comp)/16384.0f; comp+=2;
+         } else if (flags & (1<<7)) { // WE_HAVE_A_TWO_BY_TWO
+            mtx[0] = ttSHORT(comp)/16384.0f; comp+=2;
+            mtx[1] = ttSHORT(comp)/16384.0f; comp+=2;
+            mtx[2] = ttSHORT(comp)/16384.0f; comp+=2;
+            mtx[3] = ttSHORT(comp)/16384.0f; comp+=2;
+         }
+
+         // Find transformation scales.
+         m = (float) STBTT_sqrt(mtx[0]*mtx[0] + mtx[1]*mtx[1]);
+         n = (float) STBTT_sqrt(mtx[2]*mtx[2] + mtx[3]*mtx[3]);
+
+         // Get indexed glyph.
+         comp_num_verts = stbtt_GetGlyphShape(info, gidx, &comp_verts);
+         if (comp_num_verts > 0) {
+            // Transform vertices.
+            for (i = 0; i < comp_num_verts; ++i) {
+               stbtt_vertex* v = &comp_verts[i];
+               stbtt_vertex_type x,y;
+               x=v->x; y=v->y;
+               v->x = (stbtt_vertex_type)(m * (mtx[0]*x + mtx[2]*y + mtx[4]));
+               v->y = (stbtt_vertex_type)(n * (mtx[1]*x + mtx[3]*y + mtx[5]));
+               x=v->cx; y=v->cy;
+               v->cx = (stbtt_vertex_type)(m * (mtx[0]*x + mtx[2]*y + mtx[4]));
+               v->cy = (stbtt_vertex_type)(n * (mtx[1]*x + mtx[3]*y + mtx[5]));
+            }
+            // Append vertices.
+            tmp = (stbtt_vertex*)STBTT_malloc((num_vertices+comp_num_verts)*sizeof(stbtt_vertex), info->userdata);
+            if (!tmp) {
+               if (vertices) STBTT_free(vertices, info->userdata);
+               if (comp_verts) STBTT_free(comp_verts, info->userdata);
+               return 0;
+            }
+            if (num_vertices > 0) STBTT_memcpy(tmp, vertices, num_vertices*sizeof(stbtt_vertex));
+            STBTT_memcpy(tmp+num_vertices, comp_verts, comp_num_verts*sizeof(stbtt_vertex));
+            if (vertices) STBTT_free(vertices, info->userdata);
+            vertices = tmp;
+            STBTT_free(comp_verts, info->userdata);
+            num_vertices += comp_num_verts;
+         }
+         // More components ?
+         more = flags & (1<<5);
+      }
+   } else {
+      // numberOfCounters == 0, do nothing
+   }
+
+   *pvertices = vertices;
+   return num_vertices;
+}
+
+typedef struct
+{
+   int bounds;
+   int started;
+   float first_x, first_y;
+   float x, y;
+   stbtt_int32 min_x, max_x, min_y, max_y;
+
+   stbtt_vertex *pvertices;
+   int num_vertices;
+} stbtt__csctx;
+
+#define STBTT__CSCTX_INIT(bounds) {bounds,0, 0,0, 0,0, 0,0,0,0, NULL, 0}
+
+static void stbtt__track_vertex(stbtt__csctx *c, stbtt_int32 x, stbtt_int32 y)
+{
+   if (x > c->max_x || !c->started) c->max_x = x;
+   if (y > c->max_y || !c->started) c->max_y = y;
+   if (x < c->min_x || !c->started) c->min_x = x;
+   if (y < c->min_y || !c->started) c->min_y = y;
+   c->started = 1;
+}
+
+static void stbtt__csctx_v(stbtt__csctx *c, stbtt_uint8 type, stbtt_int32 x, stbtt_int32 y, stbtt_int32 cx, stbtt_int32 cy, stbtt_int32 cx1, stbtt_int32 cy1)
+{
+   if (c->bounds) {
+      stbtt__track_vertex(c, x, y);
+      if (type == STBTT_vcubic) {
+         stbtt__track_vertex(c, cx, cy);
+         stbtt__track_vertex(c, cx1, cy1);
+      }
+   } else {
+      stbtt_setvertex(&c->pvertices[c->num_vertices], type, x, y, cx, cy);
+      c->pvertices[c->num_vertices].cx1 = (stbtt_int16) cx1;
+      c->pvertices[c->num_vertices].cy1 = (stbtt_int16) cy1;
+   }
+   c->num_vertices++;
+}
+
+static void stbtt__csctx_close_shape(stbtt__csctx *ctx)
+{
+   if (ctx->first_x != ctx->x || ctx->first_y != ctx->y)
+      stbtt__csctx_v(ctx, STBTT_vline, (int)ctx->first_x, (int)ctx->first_y, 0, 0, 0, 0);
+}
+
+static void stbtt__csctx_rmove_to(stbtt__csctx *ctx, float dx, float dy)
+{
+   stbtt__csctx_close_shape(ctx);
+   ctx->first_x = ctx->x = ctx->x + dx;
+   ctx->first_y = ctx->y = ctx->y + dy;
+   stbtt__csctx_v(ctx, STBTT_vmove, (int)ctx->x, (int)ctx->y, 0, 0, 0, 0);
+}
+
+static void stbtt__csctx_rline_to(stbtt__csctx *ctx, float dx, float dy)
+{
+   ctx->x += dx;
+   ctx->y += dy;
+   stbtt__csctx_v(ctx, STBTT_vline, (int)ctx->x, (int)ctx->y, 0, 0, 0, 0);
+}
+
+static void stbtt__csctx_rccurve_to(stbtt__csctx *ctx, float dx1, float dy1, float dx2, float dy2, float dx3, float dy3)
+{
+   float cx1 = ctx->x + dx1;
+   float cy1 = ctx->y + dy1;
+   float cx2 = cx1 + dx2;
+   float cy2 = cy1 + dy2;
+   ctx->x = cx2 + dx3;
+   ctx->y = cy2 + dy3;
+   stbtt__csctx_v(ctx, STBTT_vcubic, (int)ctx->x, (int)ctx->y, (int)cx1, (int)cy1, (int)cx2, (int)cy2);
+}
+
+static stbtt__buf stbtt__get_subr(stbtt__buf idx, int n)
+{
+   int count = stbtt__cff_index_count(&idx);
+   int bias = 107;
+   if (count >= 33900)
+      bias = 32768;
+   else if (count >= 1240)
+      bias = 1131;
+   n += bias;
+   if (n < 0 || n >= count)
+      return stbtt__new_buf(NULL, 0);
+   return stbtt__cff_index_get(idx, n);
+}
+
+static stbtt__buf stbtt__cid_get_glyph_subrs(const stbtt_fontinfo *info, int glyph_index)
+{
+   stbtt__buf fdselect = info->fdselect;
+   int nranges, start, end, v, fmt, fdselector = -1, i;
+
+   stbtt__buf_seek(&fdselect, 0);
+   fmt = stbtt__buf_get8(&fdselect);
+   if (fmt == 0) {
+      // untested
+      stbtt__buf_skip(&fdselect, glyph_index);
+      fdselector = stbtt__buf_get8(&fdselect);
+   } else if (fmt == 3) {
+      nranges = stbtt__buf_get16(&fdselect);
+      start = stbtt__buf_get16(&fdselect);
+      for (i = 0; i < nranges; i++) {
+         v = stbtt__buf_get8(&fdselect);
+         end = stbtt__buf_get16(&fdselect);
+         if (glyph_index >= start && glyph_index < end) {
+            fdselector = v;
+            break;
+         }
+         start = end;
+      }
+   }
+   if (fdselector == -1) stbtt__new_buf(NULL, 0);
+   return stbtt__get_subrs(info->cff, stbtt__cff_index_get(info->fontdicts, fdselector));
+}
+
+static int stbtt__run_charstring(const stbtt_fontinfo *info, int glyph_index, stbtt__csctx *c)
+{
+   int in_header = 1, maskbits = 0, subr_stack_height = 0, sp = 0, v, i, b0;
+   int has_subrs = 0, clear_stack;
+   float s[48];
+   stbtt__buf subr_stack[10], subrs = info->subrs, b;
+   float f;
+
+#define STBTT__CSERR(s) (0)
+
+   // this currently ignores the initial width value, which isn't needed if we have hmtx
+   b = stbtt__cff_index_get(info->charstrings, glyph_index);
+   while (b.cursor < b.size) {
+      i = 0;
+      clear_stack = 1;
+      b0 = stbtt__buf_get8(&b);
+      switch (b0) {
+      // @TODO implement hinting
+      case 0x13: // hintmask
+      case 0x14: // cntrmask
+         if (in_header)
+            maskbits += (sp / 2); // implicit "vstem"
+         in_header = 0;
+         stbtt__buf_skip(&b, (maskbits + 7) / 8);
+         break;
+
+      case 0x01: // hstem
+      case 0x03: // vstem
+      case 0x12: // hstemhm
+      case 0x17: // vstemhm
+         maskbits += (sp / 2);
+         break;
+
+      case 0x15: // rmoveto
+         in_header = 0;
+         if (sp < 2) return STBTT__CSERR("rmoveto stack");
+         stbtt__csctx_rmove_to(c, s[sp-2], s[sp-1]);
+         break;
+      case 0x04: // vmoveto
+         in_header = 0;
+         if (sp < 1) return STBTT__CSERR("vmoveto stack");
+         stbtt__csctx_rmove_to(c, 0, s[sp-1]);
+         break;
+      case 0x16: // hmoveto
+         in_header = 0;
+         if (sp < 1) return STBTT__CSERR("hmoveto stack");
+         stbtt__csctx_rmove_to(c, s[sp-1], 0);
+         break;
+
+      case 0x05: // rlineto
+         if (sp < 2) return STBTT__CSERR("rlineto stack");
+         for (; i + 1 < sp; i += 2)
+            stbtt__csctx_rline_to(c, s[i], s[i+1]);
+         break;
+
+      // hlineto/vlineto and vhcurveto/hvcurveto alternate horizontal and vertical
+      // starting from a different place.
+
+      case 0x07: // vlineto
+         if (sp < 1) return STBTT__CSERR("vlineto stack");
+         goto vlineto;
+      case 0x06: // hlineto
+         if (sp < 1) return STBTT__CSERR("hlineto stack");
+         for (;;) {
+            if (i >= sp) break;
+            stbtt__csctx_rline_to(c, s[i], 0);
+            i++;
+      vlineto:
+            if (i >= sp) break;
+            stbtt__csctx_rline_to(c, 0, s[i]);
+            i++;
+         }
+         break;
+
+      case 0x1F: // hvcurveto
+         if (sp < 4) return STBTT__CSERR("hvcurveto stack");
+         goto hvcurveto;
+      case 0x1E: // vhcurveto
+         if (sp < 4) return STBTT__CSERR("vhcurveto stack");
+         for (;;) {
+            if (i + 3 >= sp) break;
+            stbtt__csctx_rccurve_to(c, 0, s[i], s[i+1], s[i+2], s[i+3], (sp - i == 5) ? s[i + 4] : 0.0f);
+            i += 4;
+      hvcurveto:
+            if (i + 3 >= sp) break;
+            stbtt__csctx_rccurve_to(c, s[i], 0, s[i+1], s[i+2], (sp - i == 5) ? s[i+4] : 0.0f, s[i+3]);
+            i += 4;
+         }
+         break;
+
+      case 0x08: // rrcurveto
+         if (sp < 6) return STBTT__CSERR("rcurveline stack");
+         for (; i + 5 < sp; i += 6)
+            stbtt__csctx_rccurve_to(c, s[i], s[i+1], s[i+2], s[i+3], s[i+4], s[i+5]);
+         break;
+
+      case 0x18: // rcurveline
+         if (sp < 8) return STBTT__CSERR("rcurveline stack");
+         for (; i + 5 < sp - 2; i += 6)
+            stbtt__csctx_rccurve_to(c, s[i], s[i+1], s[i+2], s[i+3], s[i+4], s[i+5]);
+         if (i + 1 >= sp) return STBTT__CSERR("rcurveline stack");
+         stbtt__csctx_rline_to(c, s[i], s[i+1]);
+         break;
+
+      case 0x19: // rlinecurve
+         if (sp < 8) return STBTT__CSERR("rlinecurve stack");
+         for (; i + 1 < sp - 6; i += 2)
+            stbtt__csctx_rline_to(c, s[i], s[i+1]);
+         if (i + 5 >= sp) return STBTT__CSERR("rlinecurve stack");
+         stbtt__csctx_rccurve_to(c, s[i], s[i+1], s[i+2], s[i+3], s[i+4], s[i+5]);
+         break;
+
+      case 0x1A: // vvcurveto
+      case 0x1B: // hhcurveto
+         if (sp < 4) return STBTT__CSERR("(vv|hh)curveto stack");
+         f = 0.0;
+         if (sp & 1) { f = s[i]; i++; }
+         for (; i + 3 < sp; i += 4) {
+            if (b0 == 0x1B)
+               stbtt__csctx_rccurve_to(c, s[i], f, s[i+1], s[i+2], s[i+3], 0.0);
+            else
+               stbtt__csctx_rccurve_to(c, f, s[i], s[i+1], s[i+2], 0.0, s[i+3]);
+            f = 0.0;
+         }
+         break;
+
+      case 0x0A: // callsubr
+         if (!has_subrs) {
+            if (info->fdselect.size)
+               subrs = stbtt__cid_get_glyph_subrs(info, glyph_index);
+            has_subrs = 1;
+         }
+         // fallthrough
+      case 0x1D: // callgsubr
+         if (sp < 1) return STBTT__CSERR("call(g|)subr stack");
+         v = (int) s[--sp];
+         if (subr_stack_height >= 10) return STBTT__CSERR("recursion limit");
+         subr_stack[subr_stack_height++] = b;
+         b = stbtt__get_subr(b0 == 0x0A ? subrs : info->gsubrs, v);
+         if (b.size == 0) return STBTT__CSERR("subr not found");
+         b.cursor = 0;
+         clear_stack = 0;
+         break;
+
+      case 0x0B: // return
+         if (subr_stack_height <= 0) return STBTT__CSERR("return outside subr");
+         b = subr_stack[--subr_stack_height];
+         clear_stack = 0;
+         break;
+
+      case 0x0E: // endchar
+         stbtt__csctx_close_shape(c);
+         return 1;
+
+      case 0x0C: { // two-byte escape
+         float dx1, dx2, dx3, dx4, dx5, dx6, dy1, dy2, dy3, dy4, dy5, dy6;
+         float dx, dy;
+         int b1 = stbtt__buf_get8(&b);
+         switch (b1) {
+         // @TODO These "flex" implementations ignore the flex-depth and resolution,
+         // and always draw beziers.
+         case 0x22: // hflex
+            if (sp < 7) return STBTT__CSERR("hflex stack");
+            dx1 = s[0];
+            dx2 = s[1];
+            dy2 = s[2];
+            dx3 = s[3];
+            dx4 = s[4];
+            dx5 = s[5];
+            dx6 = s[6];
+            stbtt__csctx_rccurve_to(c, dx1, 0, dx2, dy2, dx3, 0);
+            stbtt__csctx_rccurve_to(c, dx4, 0, dx5, -dy2, dx6, 0);
+            break;
+
+         case 0x23: // flex
+            if (sp < 13) return STBTT__CSERR("flex stack");
+            dx1 = s[0];
+            dy1 = s[1];
+            dx2 = s[2];
+            dy2 = s[3];
+            dx3 = s[4];
+            dy3 = s[5];
+            dx4 = s[6];
+            dy4 = s[7];
+            dx5 = s[8];
+            dy5 = s[9];
+            dx6 = s[10];
+            dy6 = s[11];
+            //fd is s[12]
+            stbtt__csctx_rccurve_to(c, dx1, dy1, dx2, dy2, dx3, dy3);
+            stbtt__csctx_rccurve_to(c, dx4, dy4, dx5, dy5, dx6, dy6);
+            break;
+
+         case 0x24: // hflex1
+            if (sp < 9) return STBTT__CSERR("hflex1 stack");
+            dx1 = s[0];
+            dy1 = s[1];
+            dx2 = s[2];
+            dy2 = s[3];
+            dx3 = s[4];
+            dx4 = s[5];
+            dx5 = s[6];
+            dy5 = s[7];
+            dx6 = s[8];
+            stbtt__csctx_rccurve_to(c, dx1, dy1, dx2, dy2, dx3, 0);
+            stbtt__csctx_rccurve_to(c, dx4, 0, dx5, dy5, dx6, -(dy1+dy2+dy5));
+            break;
+
+         case 0x25: // flex1
+            if (sp < 11) return STBTT__CSERR("flex1 stack");
+            dx1 = s[0];
+            dy1 = s[1];
+            dx2 = s[2];
+            dy2 = s[3];
+            dx3 = s[4];
+            dy3 = s[5];
+            dx4 = s[6];
+            dy4 = s[7];
+            dx5 = s[8];
+            dy5 = s[9];
+            dx6 = dy6 = s[10];
+            dx = dx1+dx2+dx3+dx4+dx5;
+            dy = dy1+dy2+dy3+dy4+dy5;
+            if (STBTT_fabs(dx) > STBTT_fabs(dy))
+               dy6 = -dy;
+            else
+               dx6 = -dx;
+            stbtt__csctx_rccurve_to(c, dx1, dy1, dx2, dy2, dx3, dy3);
+            stbtt__csctx_rccurve_to(c, dx4, dy4, dx5, dy5, dx6, dy6);
+            break;
+
+         default:
+            return STBTT__CSERR("unimplemented");
+         }
+      } break;
+
+      default:
+         if (b0 != 255 && b0 != 28 && (b0 < 32 || b0 > 254))
+            return STBTT__CSERR("reserved operator");
+
+         // push immediate
+         if (b0 == 255) {
+            f = (float)(stbtt_int32)stbtt__buf_get32(&b) / 0x10000;
+         } else {
+            stbtt__buf_skip(&b, -1);
+            f = (float)(stbtt_int16)stbtt__cff_int(&b);
+         }
+         if (sp >= 48) return STBTT__CSERR("push stack overflow");
+         s[sp++] = f;
+         clear_stack = 0;
+         break;
+      }
+      if (clear_stack) sp = 0;
+   }
+   return STBTT__CSERR("no endchar");
+
+#undef STBTT__CSERR
+}
+
+static int stbtt__GetGlyphShapeT2(const stbtt_fontinfo *info, int glyph_index, stbtt_vertex **pvertices)
+{
+   // runs the charstring twice, once to count and once to output (to avoid realloc)
+   stbtt__csctx count_ctx = STBTT__CSCTX_INIT(1);
+   stbtt__csctx output_ctx = STBTT__CSCTX_INIT(0);
+   if (stbtt__run_charstring(info, glyph_index, &count_ctx)) {
+      *pvertices = (stbtt_vertex*)STBTT_malloc(count_ctx.num_vertices*sizeof(stbtt_vertex), info->userdata);
+      output_ctx.pvertices = *pvertices;
+      if (stbtt__run_charstring(info, glyph_index, &output_ctx)) {
+         STBTT_assert(output_ctx.num_vertices == count_ctx.num_vertices);
+         return output_ctx.num_vertices;
+      }
+   }
+   *pvertices = NULL;
+   return 0;
+}
+
+static int stbtt__GetGlyphInfoT2(const stbtt_fontinfo *info, int glyph_index, int *x0, int *y0, int *x1, int *y1)
+{
+   stbtt__csctx c = STBTT__CSCTX_INIT(1);
+   int r = stbtt__run_charstring(info, glyph_index, &c);
+   if (x0)  *x0 = r ? c.min_x : 0;
+   if (y0)  *y0 = r ? c.min_y : 0;
+   if (x1)  *x1 = r ? c.max_x : 0;
+   if (y1)  *y1 = r ? c.max_y : 0;
+   return r ? c.num_vertices : 0;
+}
+
+STBTT_DEF int stbtt_GetGlyphShape(const stbtt_fontinfo *info, int glyph_index, stbtt_vertex **pvertices)
+{
+   if (!info->cff.size)
+      return stbtt__GetGlyphShapeTT(info, glyph_index, pvertices);
+   else
+      return stbtt__GetGlyphShapeT2(info, glyph_index, pvertices);
+}
+
+STBTT_DEF void stbtt_GetGlyphHMetrics(const stbtt_fontinfo *info, int glyph_index, int *advanceWidth, int *leftSideBearing)
+{
+   stbtt_uint16 numOfLongHorMetrics = ttUSHORT(info->data+info->hhea + 34);
+   if (glyph_index < numOfLongHorMetrics) {
+      if (advanceWidth)     *advanceWidth    = ttSHORT(info->data + info->hmtx + 4*glyph_index);
+      if (leftSideBearing)  *leftSideBearing = ttSHORT(info->data + info->hmtx + 4*glyph_index + 2);
+   } else {
+      if (advanceWidth)     *advanceWidth    = ttSHORT(info->data + info->hmtx + 4*(numOfLongHorMetrics-1));
+      if (leftSideBearing)  *leftSideBearing = ttSHORT(info->data + info->hmtx + 4*numOfLongHorMetrics + 2*(glyph_index - numOfLongHorMetrics));
+   }
+}
+
+STBTT_DEF int  stbtt_GetKerningTableLength(const stbtt_fontinfo *info)
+{
+   stbtt_uint8 *data = info->data + info->kern;
+
+   // we only look at the first table. it must be 'horizontal' and format 0.
+   if (!info->kern)
+      return 0;
+   if (ttUSHORT(data+2) < 1) // number of tables, need at least 1
+      return 0;
+   if (ttUSHORT(data+8) != 1) // horizontal flag must be set in format
+      return 0;
+
+   return ttUSHORT(data+10);
+}
+
+STBTT_DEF int stbtt_GetKerningTable(const stbtt_fontinfo *info, stbtt_kerningentry* table, int table_length)
+{
+   stbtt_uint8 *data = info->data + info->kern;
+   int k, length;
+
+   // we only look at the first table. it must be 'horizontal' and format 0.
+   if (!info->kern)
+      return 0;
+   if (ttUSHORT(data+2) < 1) // number of tables, need at least 1
+      return 0;
+   if (ttUSHORT(data+8) != 1) // horizontal flag must be set in format
+      return 0;
+
+   length = ttUSHORT(data+10);
+   if (table_length < length)
+      length = table_length;
+
+   for (k = 0; k < length; k++)
+   {
+      table[k].glyph1 = ttUSHORT(data+18+(k*6));
+      table[k].glyph2 = ttUSHORT(data+20+(k*6));
+      table[k].advance = ttSHORT(data+22+(k*6));
+   }
+
+   return length;
+}
+
+static int  stbtt__GetGlyphKernInfoAdvance(const stbtt_fontinfo *info, int glyph1, int glyph2)
+{
+   stbtt_uint8 *data = info->data + info->kern;
+   stbtt_uint32 needle, straw;
+   int l, r, m;
+
+   // we only look at the first table. it must be 'horizontal' and format 0.
+   if (!info->kern)
+      return 0;
+   if (ttUSHORT(data+2) < 1) // number of tables, need at least 1
+      return 0;
+   if (ttUSHORT(data+8) != 1) // horizontal flag must be set in format
+      return 0;
+
+   l = 0;
+   r = ttUSHORT(data+10) - 1;
+   needle = glyph1 << 16 | glyph2;
+   while (l <= r) {
+      m = (l + r) >> 1;
+      straw = ttULONG(data+18+(m*6)); // note: unaligned read
+      if (needle < straw)
+         r = m - 1;
+      else if (needle > straw)
+         l = m + 1;
+      else
+         return ttSHORT(data+22+(m*6));
+   }
+   return 0;
+}
+
+static stbtt_int32  stbtt__GetCoverageIndex(stbtt_uint8 *coverageTable, int glyph)
+{
+    stbtt_uint16 coverageFormat = ttUSHORT(coverageTable);
+    switch(coverageFormat) {
+        case 1: {
+            stbtt_uint16 glyphCount = ttUSHORT(coverageTable + 2);
+
+            // Binary search.
+            stbtt_int32 l=0, r=glyphCount-1, m;
+            int straw, needle=glyph;
+            while (l <= r) {
+                stbtt_uint8 *glyphArray = coverageTable + 4;
+                stbtt_uint16 glyphID;
+                m = (l + r) >> 1;
+                glyphID = ttUSHORT(glyphArray + 2 * m);
+                straw = glyphID;
+                if (needle < straw)
+                    r = m - 1;
+                else if (needle > straw)
+                    l = m + 1;
+                else {
+                     return m;
+                }
+            }
+        } break;
+
+        case 2: {
+            stbtt_uint16 rangeCount = ttUSHORT(coverageTable + 2);
+            stbtt_uint8 *rangeArray = coverageTable + 4;
+
+            // Binary search.
+            stbtt_int32 l=0, r=rangeCount-1, m;
+            int strawStart, strawEnd, needle=glyph;
+            while (l <= r) {
+                stbtt_uint8 *rangeRecord;
+                m = (l + r) >> 1;
+                rangeRecord = rangeArray + 6 * m;
+                strawStart = ttUSHORT(rangeRecord);
+                strawEnd = ttUSHORT(rangeRecord + 2);
+                if (needle < strawStart)
+                    r = m - 1;
+                else if (needle > strawEnd)
+                    l = m + 1;
+                else {
+                    stbtt_uint16 startCoverageIndex = ttUSHORT(rangeRecord + 4);
+                    return startCoverageIndex + glyph - strawStart;
+                }
+            }
+        } break;
+
+        default: {
+            // There are no other cases.
+            STBTT_assert(0);
+        } break;
+    }
+
+    return -1;
+}
+
+static stbtt_int32  stbtt__GetGlyphClass(stbtt_uint8 *classDefTable, int glyph)
+{
+    stbtt_uint16 classDefFormat = ttUSHORT(classDefTable);
+    switch(classDefFormat)
+    {
+        case 1: {
+            stbtt_uint16 startGlyphID = ttUSHORT(classDefTable + 2);
+            stbtt_uint16 glyphCount = ttUSHORT(classDefTable + 4);
+            stbtt_uint8 *classDef1ValueArray = classDefTable + 6;
+
+            if (glyph >= startGlyphID && glyph < startGlyphID + glyphCount)
+                return (stbtt_int32)ttUSHORT(classDef1ValueArray + 2 * (glyph - startGlyphID));
+
+            classDefTable = classDef1ValueArray + 2 * glyphCount;
+        } break;
+
+        case 2: {
+            stbtt_uint16 classRangeCount = ttUSHORT(classDefTable + 2);
+            stbtt_uint8 *classRangeRecords = classDefTable + 4;
+
+            // Binary search.
+            stbtt_int32 l=0, r=classRangeCount-1, m;
+            int strawStart, strawEnd, needle=glyph;
+            while (l <= r) {
+                stbtt_uint8 *classRangeRecord;
+                m = (l + r) >> 1;
+                classRangeRecord = classRangeRecords + 6 * m;
+                strawStart = ttUSHORT(classRangeRecord);
+                strawEnd = ttUSHORT(classRangeRecord + 2);
+                if (needle < strawStart)
+                    r = m - 1;
+                else if (needle > strawEnd)
+                    l = m + 1;
+                else
+                    return (stbtt_int32)ttUSHORT(classRangeRecord + 4);
+            }
+
+            classDefTable = classRangeRecords + 6 * classRangeCount;
+        } break;
+
+        default: {
+            // There are no other cases.
+            STBTT_assert(0);
+        } break;
+    }
+
+    return -1;
+}
+
+// Define to STBTT_assert(x) if you want to break on unimplemented formats.
+#define STBTT_GPOS_TODO_assert(x)
+
+static stbtt_int32  stbtt__GetGlyphGPOSInfoAdvance(const stbtt_fontinfo *info, int glyph1, int glyph2)
+{
+    stbtt_uint16 lookupListOffset;
+    stbtt_uint8 *lookupList;
+    stbtt_uint16 lookupCount;
+    stbtt_uint8 *data;
+    stbtt_int32 i;
+
+    if (!info->gpos) return 0;
+
+    data = info->data + info->gpos;
+
+    if (ttUSHORT(data+0) != 1) return 0; // Major version 1
+    if (ttUSHORT(data+2) != 0) return 0; // Minor version 0
+
+    lookupListOffset = ttUSHORT(data+8);
+    lookupList = data + lookupListOffset;
+    lookupCount = ttUSHORT(lookupList);
+
+    for (i=0; i<lookupCount; ++i) {
+        stbtt_uint16 lookupOffset = ttUSHORT(lookupList + 2 + 2 * i);
+        stbtt_uint8 *lookupTable = lookupList + lookupOffset;
+
+        stbtt_uint16 lookupType = ttUSHORT(lookupTable);
+        stbtt_uint16 subTableCount = ttUSHORT(lookupTable + 4);
+        stbtt_uint8 *subTableOffsets = lookupTable + 6;
+        switch(lookupType) {
+            case 2: { // Pair Adjustment Positioning Subtable
+                stbtt_int32 sti;
+                for (sti=0; sti<subTableCount; sti++) {
+                    stbtt_uint16 subtableOffset = ttUSHORT(subTableOffsets + 2 * sti);
+                    stbtt_uint8 *table = lookupTable + subtableOffset;
+                    stbtt_uint16 posFormat = ttUSHORT(table);
+                    stbtt_uint16 coverageOffset = ttUSHORT(table + 2);
+                    stbtt_int32 coverageIndex = stbtt__GetCoverageIndex(table + coverageOffset, glyph1);
+                    if (coverageIndex == -1) continue;
+
+                    switch (posFormat) {
+                        case 1: {
+                            stbtt_int32 l, r, m;
+                            int straw, needle;
+                            stbtt_uint16 valueFormat1 = ttUSHORT(table + 4);
+                            stbtt_uint16 valueFormat2 = ttUSHORT(table + 6);
+                            stbtt_int32 valueRecordPairSizeInBytes = 2;
+                            stbtt_uint16 pairSetCount = ttUSHORT(table + 8);
+                            stbtt_uint16 pairPosOffset = ttUSHORT(table + 10 + 2 * coverageIndex);
+                            stbtt_uint8 *pairValueTable = table + pairPosOffset;
+                            stbtt_uint16 pairValueCount = ttUSHORT(pairValueTable);
+                            stbtt_uint8 *pairValueArray = pairValueTable + 2;
+                            // TODO: Support more formats.
+                            STBTT_GPOS_TODO_assert(valueFormat1 == 4);
+                            if (valueFormat1 != 4) return 0;
+                            STBTT_GPOS_TODO_assert(valueFormat2 == 0);
+                            if (valueFormat2 != 0) return 0;
+
+                            STBTT_assert(coverageIndex < pairSetCount);
+                            STBTT__NOTUSED(pairSetCount);
+
+                            needle=glyph2;
+                            r=pairValueCount-1;
+                            l=0;
+
+                            // Binary search.
+                            while (l <= r) {
+                                stbtt_uint16 secondGlyph;
+                                stbtt_uint8 *pairValue;
+                                m = (l + r) >> 1;
+                                pairValue = pairValueArray + (2 + valueRecordPairSizeInBytes) * m;
+                                secondGlyph = ttUSHORT(pairValue);
+                                straw = secondGlyph;
+                                if (needle < straw)
+                                    r = m - 1;
+                                else if (needle > straw)
+                                    l = m + 1;
+                                else {
+                                    stbtt_int16 xAdvance = ttSHORT(pairValue + 2);
+                                    return xAdvance;
+                                }
+                            }
+                        } break;
+
+                        case 2: {
+                            stbtt_uint16 valueFormat1 = ttUSHORT(table + 4);
+                            stbtt_uint16 valueFormat2 = ttUSHORT(table + 6);
+
+                            stbtt_uint16 classDef1Offset = ttUSHORT(table + 8);
+                            stbtt_uint16 classDef2Offset = ttUSHORT(table + 10);
+                            int glyph1class = stbtt__GetGlyphClass(table + classDef1Offset, glyph1);
+                            int glyph2class = stbtt__GetGlyphClass(table + classDef2Offset, glyph2);
+
+                            stbtt_uint16 class1Count = ttUSHORT(table + 12);
+                            stbtt_uint16 class2Count = ttUSHORT(table + 14);
+                            STBTT_assert(glyph1class < class1Count);
+                            STBTT_assert(glyph2class < class2Count);
+
+                            // TODO: Support more formats.
+                            STBTT_GPOS_TODO_assert(valueFormat1 == 4);
+                            if (valueFormat1 != 4) return 0;
+                            STBTT_GPOS_TODO_assert(valueFormat2 == 0);
+                            if (valueFormat2 != 0) return 0;
+
+                            if (glyph1class >= 0 && glyph1class < class1Count && glyph2class >= 0 && glyph2class < class2Count) {
+                                stbtt_uint8 *class1Records = table + 16;
+                                stbtt_uint8 *class2Records = class1Records + 2 * (glyph1class * class2Count);
+                                stbtt_int16 xAdvance = ttSHORT(class2Records + 2 * glyph2class);
+                                return xAdvance;
+                            }
+                        } break;
+
+                        default: {
+                            // There are no other cases.
+                            STBTT_assert(0);
+                            break;
+                        };
+                    }
+                }
+                break;
+            };
+
+            default:
+                // TODO: Implement other stuff.
+                break;
+        }
+    }
+
+    return 0;
+}
+
+STBTT_DEF int  stbtt_GetGlyphKernAdvance(const stbtt_fontinfo *info, int g1, int g2)
+{
+   int xAdvance = 0;
+
+   if (info->gpos)
+      xAdvance += stbtt__GetGlyphGPOSInfoAdvance(info, g1, g2);
+   else if (info->kern)
+      xAdvance += stbtt__GetGlyphKernInfoAdvance(info, g1, g2);
+
+   return xAdvance;
+}
+
+STBTT_DEF int  stbtt_GetCodepointKernAdvance(const stbtt_fontinfo *info, int ch1, int ch2)
+{
+   if (!info->kern && !info->gpos) // if no kerning table, don't waste time looking up both codepoint->glyphs
+      return 0;
+   return stbtt_GetGlyphKernAdvance(info, stbtt_FindGlyphIndex(info,ch1), stbtt_FindGlyphIndex(info,ch2));
+}
+
+STBTT_DEF void stbtt_GetCodepointHMetrics(const stbtt_fontinfo *info, int codepoint, int *advanceWidth, int *leftSideBearing)
+{
+   stbtt_GetGlyphHMetrics(info, stbtt_FindGlyphIndex(info,codepoint), advanceWidth, leftSideBearing);
+}
+
+STBTT_DEF void stbtt_GetFontVMetrics(const stbtt_fontinfo *info, int *ascent, int *descent, int *lineGap)
+{
+   if (ascent ) *ascent  = ttSHORT(info->data+info->hhea + 4);
+   if (descent) *descent = ttSHORT(info->data+info->hhea + 6);
+   if (lineGap) *lineGap = ttSHORT(info->data+info->hhea + 8);
+}
+
+STBTT_DEF int  stbtt_GetFontVMetricsOS2(const stbtt_fontinfo *info, int *typoAscent, int *typoDescent, int *typoLineGap)
+{
+   int tab = stbtt__find_table(info->data, info->fontstart, "OS/2");
+   if (!tab)
+      return 0;
+   if (typoAscent ) *typoAscent  = ttSHORT(info->data+tab + 68);
+   if (typoDescent) *typoDescent = ttSHORT(info->data+tab + 70);
+   if (typoLineGap) *typoLineGap = ttSHORT(info->data+tab + 72);
+   return 1;
+}
+
+STBTT_DEF void stbtt_GetFontBoundingBox(const stbtt_fontinfo *info, int *x0, int *y0, int *x1, int *y1)
+{
+   *x0 = ttSHORT(info->data + info->head + 36);
+   *y0 = ttSHORT(info->data + info->head + 38);
+   *x1 = ttSHORT(info->data + info->head + 40);
+   *y1 = ttSHORT(info->data + info->head + 42);
+}
+
+STBTT_DEF float stbtt_ScaleForPixelHeight(const stbtt_fontinfo *info, float height)
+{
+   int fheight = ttSHORT(info->data + info->hhea + 4) - ttSHORT(info->data + info->hhea + 6);
+   return (float) height / fheight;
+}
+
+STBTT_DEF float stbtt_ScaleForMappingEmToPixels(const stbtt_fontinfo *info, float pixels)
+{
+   int unitsPerEm = ttUSHORT(info->data + info->head + 18);
+   return pixels / unitsPerEm;
+}
+
+STBTT_DEF void stbtt_FreeShape(const stbtt_fontinfo *info, stbtt_vertex *v)
+{
+   STBTT_free(v, info->userdata);
+}
+
+STBTT_DEF stbtt_uint8 *stbtt_FindSVGDoc(const stbtt_fontinfo *info, int gl)
+{
+   int i;
+   stbtt_uint8 *data = info->data;
+   stbtt_uint8 *svg_doc_list = data + stbtt__get_svg((stbtt_fontinfo *) info);
+
+   int numEntries = ttUSHORT(svg_doc_list);
+   stbtt_uint8 *svg_docs = svg_doc_list + 2;
+
+   for(i=0; i<numEntries; i++) {
+      stbtt_uint8 *svg_doc = svg_docs + (12 * i);
+      if ((gl >= ttUSHORT(svg_doc)) && (gl <= ttUSHORT(svg_doc + 2)))
+         return svg_doc;
+   }
+   return 0;
+}
+
+STBTT_DEF int stbtt_GetGlyphSVG(const stbtt_fontinfo *info, int gl, const char **svg)
+{
+   stbtt_uint8 *data = info->data;
+   stbtt_uint8 *svg_doc;
+
+   if (info->svg == 0)
+      return 0;
+
+   svg_doc = stbtt_FindSVGDoc(info, gl);
+   if (svg_doc != NULL) {
+      *svg = (char *) data + info->svg + ttULONG(svg_doc + 4);
+      return ttULONG(svg_doc + 8);
+   } else {
+      return 0;
+   }
+}
+
+STBTT_DEF int stbtt_GetCodepointSVG(const stbtt_fontinfo *info, int unicode_codepoint, const char **svg)
+{
+   return stbtt_GetGlyphSVG(info, stbtt_FindGlyphIndex(info, unicode_codepoint), svg);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// antialiasing software rasterizer
+//
+
+STBTT_DEF void stbtt_GetGlyphBitmapBoxSubpixel(const stbtt_fontinfo *font, int glyph, float scale_x, float scale_y,float shift_x, float shift_y, int *ix0, int *iy0, int *ix1, int *iy1)
+{
+   int x0=0,y0=0,x1,y1; // =0 suppresses compiler warning
+   if (!stbtt_GetGlyphBox(font, glyph, &x0,&y0,&x1,&y1)) {
+      // e.g. space character
+      if (ix0) *ix0 = 0;
+      if (iy0) *iy0 = 0;
+      if (ix1) *ix1 = 0;
+      if (iy1) *iy1 = 0;
+   } else {
+      // move to integral bboxes (treating pixels as little squares, what pixels get touched)?
+      if (ix0) *ix0 = STBTT_ifloor( x0 * scale_x + shift_x);
+      if (iy0) *iy0 = STBTT_ifloor(-y1 * scale_y + shift_y);
+      if (ix1) *ix1 = STBTT_iceil ( x1 * scale_x + shift_x);
+      if (iy1) *iy1 = STBTT_iceil (-y0 * scale_y + shift_y);
+   }
+}
+
+STBTT_DEF void stbtt_GetGlyphBitmapBox(const stbtt_fontinfo *font, int glyph, float scale_x, float scale_y, int *ix0, int *iy0, int *ix1, int *iy1)
+{
+   stbtt_GetGlyphBitmapBoxSubpixel(font, glyph, scale_x, scale_y,0.0f,0.0f, ix0, iy0, ix1, iy1);
+}
+
+STBTT_DEF void stbtt_GetCodepointBitmapBoxSubpixel(const stbtt_fontinfo *font, int codepoint, float scale_x, float scale_y, float shift_x, float shift_y, int *ix0, int *iy0, int *ix1, int *iy1)
+{
+   stbtt_GetGlyphBitmapBoxSubpixel(font, stbtt_FindGlyphIndex(font,codepoint), scale_x, scale_y,shift_x,shift_y, ix0,iy0,ix1,iy1);
+}
+
+STBTT_DEF void stbtt_GetCodepointBitmapBox(const stbtt_fontinfo *font, int codepoint, float scale_x, float scale_y, int *ix0, int *iy0, int *ix1, int *iy1)
+{
+   stbtt_GetCodepointBitmapBoxSubpixel(font, codepoint, scale_x, scale_y,0.0f,0.0f, ix0,iy0,ix1,iy1);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+//
+//  Rasterizer
+
+typedef struct stbtt__hheap_chunk
+{
+   struct stbtt__hheap_chunk *next;
+} stbtt__hheap_chunk;
+
+typedef struct stbtt__hheap
+{
+   struct stbtt__hheap_chunk *head;
+   void   *first_free;
+   int    num_remaining_in_head_chunk;
+} stbtt__hheap;
+
+static void *stbtt__hheap_alloc(stbtt__hheap *hh, size_t size, void *userdata)
+{
+   if (hh->first_free) {
+      void *p = hh->first_free;
+      hh->first_free = * (void **) p;
+      return p;
+   } else {
+      if (hh->num_remaining_in_head_chunk == 0) {
+         int count = (size < 32 ? 2000 : size < 128 ? 800 : 100);
+         stbtt__hheap_chunk *c = (stbtt__hheap_chunk *) STBTT_malloc(sizeof(stbtt__hheap_chunk) + size * count, userdata);
+         if (c == NULL)
+            return NULL;
+         c->next = hh->head;
+         hh->head = c;
+         hh->num_remaining_in_head_chunk = count;
+      }
+      --hh->num_remaining_in_head_chunk;
+      return (char *) (hh->head) + sizeof(stbtt__hheap_chunk) + size * hh->num_remaining_in_head_chunk;
+   }
+}
+
+static void stbtt__hheap_free(stbtt__hheap *hh, void *p)
+{
+   *(void **) p = hh->first_free;
+   hh->first_free = p;
+}
+
+static void stbtt__hheap_cleanup(stbtt__hheap *hh, void *userdata)
+{
+   stbtt__hheap_chunk *c = hh->head;
+   while (c) {
+      stbtt__hheap_chunk *n = c->next;
+      STBTT_free(c, userdata);
+      c = n;
+   }
+}
+
+typedef struct stbtt__edge {
+   float x0,y0, x1,y1;
+   int invert;
+} stbtt__edge;
+
+
+typedef struct stbtt__active_edge
+{
+   struct stbtt__active_edge *next;
+   #if STBTT_RASTERIZER_VERSION==1
+   int x,dx;
+   float ey;
+   int direction;
+   #elif STBTT_RASTERIZER_VERSION==2
+   float fx,fdx,fdy;
+   float direction;
+   float sy;
+   float ey;
+   #else
+   #error "Unrecognized value of STBTT_RASTERIZER_VERSION"
+   #endif
+} stbtt__active_edge;
+
+#if STBTT_RASTERIZER_VERSION == 1
+#define STBTT_FIXSHIFT   10
+#define STBTT_FIX        (1 << STBTT_FIXSHIFT)
+#define STBTT_FIXMASK    (STBTT_FIX-1)
+
+static stbtt__active_edge *stbtt__new_active(stbtt__hheap *hh, stbtt__edge *e, int off_x, float start_point, void *userdata)
+{
+   stbtt__active_edge *z = (stbtt__active_edge *) stbtt__hheap_alloc(hh, sizeof(*z), userdata);
+   float dxdy = (e->x1 - e->x0) / (e->y1 - e->y0);
+   STBTT_assert(z != NULL);
+   if (!z) return z;
+
+   // round dx down to avoid overshooting
+   if (dxdy < 0)
+      z->dx = -STBTT_ifloor(STBTT_FIX * -dxdy);
+   else
+      z->dx = STBTT_ifloor(STBTT_FIX * dxdy);
+
+   z->x = STBTT_ifloor(STBTT_FIX * e->x0 + z->dx * (start_point - e->y0)); // use z->dx so when we offset later it's by the same amount
+   z->x -= off_x * STBTT_FIX;
+
+   z->ey = e->y1;
+   z->next = 0;
+   z->direction = e->invert ? 1 : -1;
+   return z;
+}
+#elif STBTT_RASTERIZER_VERSION == 2
+static stbtt__active_edge *stbtt__new_active(stbtt__hheap *hh, stbtt__edge *e, int off_x, float start_point, void *userdata)
+{
+   stbtt__active_edge *z = (stbtt__active_edge *) stbtt__hheap_alloc(hh, sizeof(*z), userdata);
+   float dxdy = (e->x1 - e->x0) / (e->y1 - e->y0);
+   STBTT_assert(z != NULL);
+   //STBTT_assert(e->y0 <= start_point);
+   if (!z) return z;
+   z->fdx = dxdy;
+   z->fdy = dxdy != 0.0f ? (1.0f/dxdy) : 0.0f;
+   z->fx = e->x0 + dxdy * (start_point - e->y0);
+   z->fx -= off_x;
+   z->direction = e->invert ? 1.0f : -1.0f;
+   z->sy = e->y0;
+   z->ey = e->y1;
+   z->next = 0;
+   return z;
+}
+#else
+#error "Unrecognized value of STBTT_RASTERIZER_VERSION"
+#endif
+
+#if STBTT_RASTERIZER_VERSION == 1
+// note: this routine clips fills that extend off the edges... ideally this
+// wouldn't happen, but it could happen if the truetype glyph bounding boxes
+// are wrong, or if the user supplies a too-small bitmap
+static void stbtt__fill_active_edges(unsigned char *scanline, int len, stbtt__active_edge *e, int max_weight)
+{
+   // non-zero winding fill
+   int x0=0, w=0;
+
+   while (e) {
+      if (w == 0) {
+         // if we're currently at zero, we need to record the edge start point
+         x0 = e->x; w += e->direction;
+      } else {
+         int x1 = e->x; w += e->direction;
+         // if we went to zero, we need to draw
+         if (w == 0) {
+            int i = x0 >> STBTT_FIXSHIFT;
+            int j = x1 >> STBTT_FIXSHIFT;
+
+            if (i < len && j >= 0) {
+               if (i == j) {
+                  // x0,x1 are the same pixel, so compute combined coverage
+                  scanline[i] = scanline[i] + (stbtt_uint8) ((x1 - x0) * max_weight >> STBTT_FIXSHIFT);
+               } else {
+                  if (i >= 0) // add antialiasing for x0
+                     scanline[i] = scanline[i] + (stbtt_uint8) (((STBTT_FIX - (x0 & STBTT_FIXMASK)) * max_weight) >> STBTT_FIXSHIFT);
+                  else
+                     i = -1; // clip
+
+                  if (j < len) // add antialiasing for x1
+                     scanline[j] = scanline[j] + (stbtt_uint8) (((x1 & STBTT_FIXMASK) * max_weight) >> STBTT_FIXSHIFT);
+                  else
+                     j = len; // clip
+
+                  for (++i; i < j; ++i) // fill pixels between x0 and x1
+                     scanline[i] = scanline[i] + (stbtt_uint8) max_weight;
+               }
+            }
+         }
+      }
+
+      e = e->next;
+   }
+}
+
+static void stbtt__rasterize_sorted_edges(stbtt__bitmap *result, stbtt__edge *e, int n, int vsubsample, int off_x, int off_y, void *userdata)
+{
+   stbtt__hheap hh = { 0, 0, 0 };
+   stbtt__active_edge *active = NULL;
+   int y,j=0;
+   int max_weight = (255 / vsubsample);  // weight per vertical scanline
+   int s; // vertical subsample index
+   unsigned char scanline_data[512], *scanline;
+
+   if (result->w > 512)
+      scanline = (unsigned char *) STBTT_malloc(result->w, userdata);
+   else
+      scanline = scanline_data;
+
+   y = off_y * vsubsample;
+   e[n].y0 = (off_y + result->h) * (float) vsubsample + 1;
+
+   while (j < result->h) {
+      STBTT_memset(scanline, 0, result->w);
+      for (s=0; s < vsubsample; ++s) {
+         // find center of pixel for this scanline
+         float scan_y = y + 0.5f;
+         stbtt__active_edge **step = &active;
+
+         // update all active edges;
+         // remove all active edges that terminate before the center of this scanline
+         while (*step) {
+            stbtt__active_edge * z = *step;
+            if (z->ey <= scan_y) {
+               *step = z->next; // delete from list
+               STBTT_assert(z->direction);
+               z->direction = 0;
+               stbtt__hheap_free(&hh, z);
+            } else {
+               z->x += z->dx; // advance to position for current scanline
+               step = &((*step)->next); // advance through list
+            }
+         }
+
+         // resort the list if needed
+         for(;;) {
+            int changed=0;
+            step = &active;
+            while (*step && (*step)->next) {
+               if ((*step)->x > (*step)->next->x) {
+                  stbtt__active_edge *t = *step;
+                  stbtt__active_edge *q = t->next;
+
+                  t->next = q->next;
+                  q->next = t;
+                  *step = q;
+                  changed = 1;
+               }
+               step = &(*step)->next;
+            }
+            if (!changed) break;
+         }
+
+         // insert all edges that start before the center of this scanline -- omit ones that also end on this scanline
+         while (e->y0 <= scan_y) {
+            if (e->y1 > scan_y) {
+               stbtt__active_edge *z = stbtt__new_active(&hh, e, off_x, scan_y, userdata);
+               if (z != NULL) {
+                  // find insertion point
+                  if (active == NULL)
+                     active = z;
+                  else if (z->x < active->x) {
+                     // insert at front
+                     z->next = active;
+                     active = z;
+                  } else {
+                     // find thing to insert AFTER
+                     stbtt__active_edge *p = active;
+                     while (p->next && p->next->x < z->x)
+                        p = p->next;
+                     // at this point, p->next->x is NOT < z->x
+                     z->next = p->next;
+                     p->next = z;
+                  }
+               }
+            }
+            ++e;
+         }
+
+         // now process all active edges in XOR fashion
+         if (active)
+            stbtt__fill_active_edges(scanline, result->w, active, max_weight);
+
+         ++y;
+      }
+      STBTT_memcpy(result->pixels + j * result->stride, scanline, result->w);
+      ++j;
+   }
+
+   stbtt__hheap_cleanup(&hh, userdata);
+
+   if (scanline != scanline_data)
+      STBTT_free(scanline, userdata);
+}
+
+#elif STBTT_RASTERIZER_VERSION == 2
+
+// the edge passed in here does not cross the vertical line at x or the vertical line at x+1
+// (i.e. it has already been clipped to those)
+static void stbtt__handle_clipped_edge(float *scanline, int x, stbtt__active_edge *e, float x0, float y0, float x1, float y1)
+{
+   if (y0 == y1) return;
+   STBTT_assert(y0 < y1);
+   STBTT_assert(e->sy <= e->ey);
+   if (y0 > e->ey) return;
+   if (y1 < e->sy) return;
+   if (y0 < e->sy) {
+      x0 += (x1-x0) * (e->sy - y0) / (y1-y0);
+      y0 = e->sy;
+   }
+   if (y1 > e->ey) {
+      x1 += (x1-x0) * (e->ey - y1) / (y1-y0);
+      y1 = e->ey;
+   }
+
+   if (x0 == x)
+      STBTT_assert(x1 <= x+1);
+   else if (x0 == x+1)
+      STBTT_assert(x1 >= x);
+   else if (x0 <= x)
+      STBTT_assert(x1 <= x);
+   else if (x0 >= x+1)
+      STBTT_assert(x1 >= x+1);
+   else
+      STBTT_assert(x1 >= x && x1 <= x+1);
+
+   if (x0 <= x && x1 <= x)
+      scanline[x] += e->direction * (y1-y0);
+   else if (x0 >= x+1 && x1 >= x+1)
+      ;
+   else {
+      STBTT_assert(x0 >= x && x0 <= x+1 && x1 >= x && x1 <= x+1);
+      scanline[x] += e->direction * (y1-y0) * (1-((x0-x)+(x1-x))/2); // coverage = 1 - average x position
+   }
+}
+
+static void stbtt__fill_active_edges_new(float *scanline, float *scanline_fill, int len, stbtt__active_edge *e, float y_top)
+{
+   float y_bottom = y_top+1;
+
+   while (e) {
+      // brute force every pixel
+
+      // compute intersection points with top & bottom
+      STBTT_assert(e->ey >= y_top);
+
+      if (e->fdx == 0) {
+         float x0 = e->fx;
+         if (x0 < len) {
+            if (x0 >= 0) {
+               stbtt__handle_clipped_edge(scanline,(int) x0,e, x0,y_top, x0,y_bottom);
+               stbtt__handle_clipped_edge(scanline_fill-1,(int) x0+1,e, x0,y_top, x0,y_bottom);
+            } else {
+               stbtt__handle_clipped_edge(scanline_fill-1,0,e, x0,y_top, x0,y_bottom);
+            }
+         }
+      } else {
+         float x0 = e->fx;
+         float dx = e->fdx;
+         float xb = x0 + dx;
+         float x_top, x_bottom;
+         float sy0,sy1;
+         float dy = e->fdy;
+         STBTT_assert(e->sy <= y_bottom && e->ey >= y_top);
+
+         // compute endpoints of line segment clipped to this scanline (if the
+         // line segment starts on this scanline. x0 is the intersection of the
+         // line with y_top, but that may be off the line segment.
+         if (e->sy > y_top) {
+            x_top = x0 + dx * (e->sy - y_top);
+            sy0 = e->sy;
+         } else {
+            x_top = x0;
+            sy0 = y_top;
+         }
+         if (e->ey < y_bottom) {
+            x_bottom = x0 + dx * (e->ey - y_top);
+            sy1 = e->ey;
+         } else {
+            x_bottom = xb;
+            sy1 = y_bottom;
+         }
+
+         if (x_top >= 0 && x_bottom >= 0 && x_top < len && x_bottom < len) {
+            // from here on, we don't have to range check x values
+
+            if ((int) x_top == (int) x_bottom) {
+               float height;
+               // simple case, only spans one pixel
+               int x = (int) x_top;
+               height = sy1 - sy0;
+               STBTT_assert(x >= 0 && x < len);
+               scanline[x] += e->direction * (1-((x_top - x) + (x_bottom-x))/2)  * height;
+               scanline_fill[x] += e->direction * height; // everything right of this pixel is filled
+            } else {
+               int x,x1,x2;
+               float y_crossing, step, sign, area;
+               // covers 2+ pixels
+               if (x_top > x_bottom) {
+                  // flip scanline vertically; signed area is the same
+                  float t;
+                  sy0 = y_bottom - (sy0 - y_top);
+                  sy1 = y_bottom - (sy1 - y_top);
+                  t = sy0, sy0 = sy1, sy1 = t;
+                  t = x_bottom, x_bottom = x_top, x_top = t;
+                  dx = -dx;
+                  dy = -dy;
+                  t = x0, x0 = xb, xb = t;
+               }
+
+               x1 = (int) x_top;
+               x2 = (int) x_bottom;
+               // compute intersection with y axis at x1+1
+               y_crossing = (x1+1 - x0) * dy + y_top;
+
+               sign = e->direction;
+               // area of the rectangle covered from y0..y_crossing
+               area = sign * (y_crossing-sy0);
+               // area of the triangle (x_top,y0), (x+1,y0), (x+1,y_crossing)
+               scanline[x1] += area * (1-((x_top - x1)+(x1+1-x1))/2);
+
+               step = sign * dy;
+               for (x = x1+1; x < x2; ++x) {
+                  scanline[x] += area + step/2;
+                  area += step;
+               }
+               y_crossing += dy * (x2 - (x1+1));
+
+               STBTT_assert(STBTT_fabs(area) <= 1.01f);
+
+               scanline[x2] += area + sign * (1-((x2-x2)+(x_bottom-x2))/2) * (sy1-y_crossing);
+
+               scanline_fill[x2] += sign * (sy1-sy0);
+            }
+         } else {
+            // if edge goes outside of box we're drawing, we require
+            // clipping logic. since this does not match the intended use
+            // of this library, we use a different, very slow brute
+            // force implementation
+            int x;
+            for (x=0; x < len; ++x) {
+               // cases:
+               //
+               // there can be up to two intersections with the pixel. any intersection
+               // with left or right edges can be handled by splitting into two (or three)
+               // regions. intersections with top & bottom do not necessitate case-wise logic.
+               //
+               // the old way of doing this found the intersections with the left & right edges,
+               // then used some simple logic to produce up to three segments in sorted order
+               // from top-to-bottom. however, this had a problem: if an x edge was epsilon
+               // across the x border, then the corresponding y position might not be distinct
+               // from the other y segment, and it might ignored as an empty segment. to avoid
+               // that, we need to explicitly produce segments based on x positions.
+
+               // rename variables to clearly-defined pairs
+               float y0 = y_top;
+               float x1 = (float) (x);
+               float x2 = (float) (x+1);
+               float x3 = xb;
+               float y3 = y_bottom;
+
+               // x = e->x + e->dx * (y-y_top)
+               // (y-y_top) = (x - e->x) / e->dx
+               // y = (x - e->x) / e->dx + y_top
+               float y1 = (x - x0) / dx + y_top;
+               float y2 = (x+1 - x0) / dx + y_top;
+
+               if (x0 < x1 && x3 > x2) {         // three segments descending down-right
+                  stbtt__handle_clipped_edge(scanline,x,e, x0,y0, x1,y1);
+                  stbtt__handle_clipped_edge(scanline,x,e, x1,y1, x2,y2);
+                  stbtt__handle_clipped_edge(scanline,x,e, x2,y2, x3,y3);
+               } else if (x3 < x1 && x0 > x2) {  // three segments descending down-left
+                  stbtt__handle_clipped_edge(scanline,x,e, x0,y0, x2,y2);
+                  stbtt__handle_clipped_edge(scanline,x,e, x2,y2, x1,y1);
+                  stbtt__handle_clipped_edge(scanline,x,e, x1,y1, x3,y3);
+               } else if (x0 < x1 && x3 > x1) {  // two segments across x, down-right
+                  stbtt__handle_clipped_edge(scanline,x,e, x0,y0, x1,y1);
+                  stbtt__handle_clipped_edge(scanline,x,e, x1,y1, x3,y3);
+               } else if (x3 < x1 && x0 > x1) {  // two segments across x, down-left
+                  stbtt__handle_clipped_edge(scanline,x,e, x0,y0, x1,y1);
+                  stbtt__handle_clipped_edge(scanline,x,e, x1,y1, x3,y3);
+               } else if (x0 < x2 && x3 > x2) {  // two segments across x+1, down-right
+                  stbtt__handle_clipped_edge(scanline,x,e, x0,y0, x2,y2);
+                  stbtt__handle_clipped_edge(scanline,x,e, x2,y2, x3,y3);
+               } else if (x3 < x2 && x0 > x2) {  // two segments across x+1, down-left
+                  stbtt__handle_clipped_edge(scanline,x,e, x0,y0, x2,y2);
+                  stbtt__handle_clipped_edge(scanline,x,e, x2,y2, x3,y3);
+               } else {  // one segment
+                  stbtt__handle_clipped_edge(scanline,x,e, x0,y0, x3,y3);
+               }
+            }
+         }
+      }
+      e = e->next;
+   }
+}
+
+// directly AA rasterize edges w/o supersampling
+static void stbtt__rasterize_sorted_edges(stbtt__bitmap *result, stbtt__edge *e, int n, int vsubsample, int off_x, int off_y, void *userdata)
+{
+   stbtt__hheap hh = { 0, 0, 0 };
+   stbtt__active_edge *active = NULL;
+   int y,j=0, i;
+   float scanline_data[129], *scanline, *scanline2;
+
+   STBTT__NOTUSED(vsubsample);
+
+   if (result->w > 64)
+      scanline = (float *) STBTT_malloc((result->w*2+1) * sizeof(float), userdata);
+   else
+      scanline = scanline_data;
+
+   scanline2 = scanline + result->w;
+
+   y = off_y;
+   e[n].y0 = (float) (off_y + result->h) + 1;
+
+   while (j < result->h) {
+      // find center of pixel for this scanline
+      float scan_y_top    = y + 0.0f;
+      float scan_y_bottom = y + 1.0f;
+      stbtt__active_edge **step = &active;
+
+      STBTT_memset(scanline , 0, result->w*sizeof(scanline[0]));
+      STBTT_memset(scanline2, 0, (result->w+1)*sizeof(scanline[0]));
+
+      // update all active edges;
+      // remove all active edges that terminate before the top of this scanline
+      while (*step) {
+         stbtt__active_edge * z = *step;
+         if (z->ey <= scan_y_top) {
+            *step = z->next; // delete from list
+            STBTT_assert(z->direction);
+            z->direction = 0;
+            stbtt__hheap_free(&hh, z);
+         } else {
+            step = &((*step)->next); // advance through list
+         }
+      }
+
+      // insert all edges that start before the bottom of this scanline
+      while (e->y0 <= scan_y_bottom) {
+         if (e->y0 != e->y1) {
+            stbtt__active_edge *z = stbtt__new_active(&hh, e, off_x, scan_y_top, userdata);
+            if (z != NULL) {
+               if (j == 0 && off_y != 0) {
+                  if (z->ey < scan_y_top) {
+                     // this can happen due to subpixel positioning and some kind of fp rounding error i think
+                     z->ey = scan_y_top;
+                  }
+               }
+               STBTT_assert(z->ey >= scan_y_top); // if we get really unlucky a tiny bit of an edge can be out of bounds
+               // insert at front
+               z->next = active;
+               active = z;
+            }
+         }
+         ++e;
+      }
+
+      // now process all active edges
+      if (active)
+         stbtt__fill_active_edges_new(scanline, scanline2+1, result->w, active, scan_y_top);
+
+      {
+         float sum = 0;
+         for (i=0; i < result->w; ++i) {
+            float k;
+            int m;
+            sum += scanline2[i];
+            k = scanline[i] + sum;
+            k = (float) STBTT_fabs(k)*255 + 0.5f;
+            m = (int) k;
+            if (m > 255) m = 255;
+            result->pixels[j*result->stride + i] = (unsigned char) m;
+         }
+      }
+      // advance all the edges
+      step = &active;
+      while (*step) {
+         stbtt__active_edge *z = *step;
+         z->fx += z->fdx; // advance to position for current scanline
+         step = &((*step)->next); // advance through list
+      }
+
+      ++y;
+      ++j;
+   }
+
+   stbtt__hheap_cleanup(&hh, userdata);
+
+   if (scanline != scanline_data)
+      STBTT_free(scanline, userdata);
+}
+#else
+#error "Unrecognized value of STBTT_RASTERIZER_VERSION"
+#endif
+
+#define STBTT__COMPARE(a,b)  ((a)->y0 < (b)->y0)
+
+static void stbtt__sort_edges_ins_sort(stbtt__edge *p, int n)
+{
+   int i,j;
+   for (i=1; i < n; ++i) {
+      stbtt__edge t = p[i], *a = &t;
+      j = i;
+      while (j > 0) {
+         stbtt__edge *b = &p[j-1];
+         int c = STBTT__COMPARE(a,b);
+         if (!c) break;
+         p[j] = p[j-1];
+         --j;
+      }
+      if (i != j)
+         p[j] = t;
+   }
+}
+
+static void stbtt__sort_edges_quicksort(stbtt__edge *p, int n)
+{
+   /* threshold for transitioning to insertion sort */
+   while (n > 12) {
+      stbtt__edge t;
+      int c01,c12,c,m,i,j;
+
+      /* compute median of three */
+      m = n >> 1;
+      c01 = STBTT__COMPARE(&p[0],&p[m]);
+      c12 = STBTT__COMPARE(&p[m],&p[n-1]);
+      /* if 0 >= mid >= end, or 0 < mid < end, then use mid */
+      if (c01 != c12) {
+         /* otherwise, we'll need to swap something else to middle */
+         int z;
+         c = STBTT__COMPARE(&p[0],&p[n-1]);
+         /* 0>mid && mid<n:  0>n => n; 0<n => 0 */
+         /* 0<mid && mid>n:  0>n => 0; 0<n => n */
+         z = (c == c12) ? 0 : n-1;
+         t = p[z];
+         p[z] = p[m];
+         p[m] = t;
+      }
+      /* now p[m] is the median-of-three */
+      /* swap it to the beginning so it won't move around */
+      t = p[0];
+      p[0] = p[m];
+      p[m] = t;
+
+      /* partition loop */
+      i=1;
+      j=n-1;
+      for(;;) {
+         /* handling of equality is crucial here */
+         /* for sentinels & efficiency with duplicates */
+         for (;;++i) {
+            if (!STBTT__COMPARE(&p[i], &p[0])) break;
+         }
+         for (;;--j) {
+            if (!STBTT__COMPARE(&p[0], &p[j])) break;
+         }
+         /* make sure we haven't crossed */
+         if (i >= j) break;
+         t = p[i];
+         p[i] = p[j];
+         p[j] = t;
+
+         ++i;
+         --j;
+      }
+      /* recurse on smaller side, iterate on larger */
+      if (j < (n-i)) {
+         stbtt__sort_edges_quicksort(p,j);
+         p = p+i;
+         n = n-i;
+      } else {
+         stbtt__sort_edges_quicksort(p+i, n-i);
+         n = j;
+      }
+   }
+}
+
+static void stbtt__sort_edges(stbtt__edge *p, int n)
+{
+   stbtt__sort_edges_quicksort(p, n);
+   stbtt__sort_edges_ins_sort(p, n);
+}
+
+typedef struct
+{
+   float x,y;
+} stbtt__point;
+
+static void stbtt__rasterize(stbtt__bitmap *result, stbtt__point *pts, int *wcount, int windings, float scale_x, float scale_y, float shift_x, float shift_y, int off_x, int off_y, int invert, void *userdata)
+{
+   float y_scale_inv = invert ? -scale_y : scale_y;
+   stbtt__edge *e;
+   int n,i,j,k,m;
+#if STBTT_RASTERIZER_VERSION == 1
+   int vsubsample = result->h < 8 ? 15 : 5;
+#elif STBTT_RASTERIZER_VERSION == 2
+   int vsubsample = 1;
+#else
+   #error "Unrecognized value of STBTT_RASTERIZER_VERSION"
+#endif
+   // vsubsample should divide 255 evenly; otherwise we won't reach full opacity
+
+   // now we have to blow out the windings into explicit edge lists
+   n = 0;
+   for (i=0; i < windings; ++i)
+      n += wcount[i];
+
+   e = (stbtt__edge *) STBTT_malloc(sizeof(*e) * (n+1), userdata); // add an extra one as a sentinel
+   if (e == 0) return;
+   n = 0;
+
+   m=0;
+   for (i=0; i < windings; ++i) {
+      stbtt__point *p = pts + m;
+      m += wcount[i];
+      j = wcount[i]-1;
+      for (k=0; k < wcount[i]; j=k++) {
+         int a=k,b=j;
+         // skip the edge if horizontal
+         if (p[j].y == p[k].y)
+            continue;
+         // add edge from j to k to the list
+         e[n].invert = 0;
+         if (invert ? p[j].y > p[k].y : p[j].y < p[k].y) {
+            e[n].invert = 1;
+            a=j,b=k;
+         }
+         e[n].x0 = p[a].x * scale_x + shift_x;
+         e[n].y0 = (p[a].y * y_scale_inv + shift_y) * vsubsample;
+         e[n].x1 = p[b].x * scale_x + shift_x;
+         e[n].y1 = (p[b].y * y_scale_inv + shift_y) * vsubsample;
+         ++n;
+      }
+   }
+
+   // now sort the edges by their highest point (should snap to integer, and then by x)
+   //STBTT_sort(e, n, sizeof(e[0]), stbtt__edge_compare);
+   stbtt__sort_edges(e, n);
+
+   // now, traverse the scanlines and find the intersections on each scanline, use xor winding rule
+   stbtt__rasterize_sorted_edges(result, e, n, vsubsample, off_x, off_y, userdata);
+
+   STBTT_free(e, userdata);
+}
+
+static void stbtt__add_point(stbtt__point *points, int n, float x, float y)
+{
+   if (!points) return; // during first pass, it's unallocated
+   points[n].x = x;
+   points[n].y = y;
+}
+
+// tessellate until threshold p is happy... @TODO warped to compensate for non-linear stretching
+static int stbtt__tesselate_curve(stbtt__point *points, int *num_points, float x0, float y0, float x1, float y1, float x2, float y2, float objspace_flatness_squared, int n)
+{
+   // midpoint
+   float mx = (x0 + 2*x1 + x2)/4;
+   float my = (y0 + 2*y1 + y2)/4;
+   // versus directly drawn line
+   float dx = (x0+x2)/2 - mx;
+   float dy = (y0+y2)/2 - my;
+   if (n > 16) // 65536 segments on one curve better be enough!
+      return 1;
+   if (dx*dx+dy*dy > objspace_flatness_squared) { // half-pixel error allowed... need to be smaller if AA
+      stbtt__tesselate_curve(points, num_points, x0,y0, (x0+x1)/2.0f,(y0+y1)/2.0f, mx,my, objspace_flatness_squared,n+1);
+      stbtt__tesselate_curve(points, num_points, mx,my, (x1+x2)/2.0f,(y1+y2)/2.0f, x2,y2, objspace_flatness_squared,n+1);
+   } else {
+      stbtt__add_point(points, *num_points,x2,y2);
+      *num_points = *num_points+1;
+   }
+   return 1;
+}
+
+static void stbtt__tesselate_cubic(stbtt__point *points, int *num_points, float x0, float y0, float x1, float y1, float x2, float y2, float x3, float y3, float objspace_flatness_squared, int n)
+{
+   // @TODO this "flatness" calculation is just made-up nonsense that seems to work well enough
+   float dx0 = x1-x0;
+   float dy0 = y1-y0;
+   float dx1 = x2-x1;
+   float dy1 = y2-y1;
+   float dx2 = x3-x2;
+   float dy2 = y3-y2;
+   float dx = x3-x0;
+   float dy = y3-y0;
+   float longlen = (float) (STBTT_sqrt(dx0*dx0+dy0*dy0)+STBTT_sqrt(dx1*dx1+dy1*dy1)+STBTT_sqrt(dx2*dx2+dy2*dy2));
+   float shortlen = (float) STBTT_sqrt(dx*dx+dy*dy);
+   float flatness_squared = longlen*longlen-shortlen*shortlen;
+
+   if (n > 16) // 65536 segments on one curve better be enough!
+      return;
+
+   if (flatness_squared > objspace_flatness_squared) {
+      float x01 = (x0+x1)/2;
+      float y01 = (y0+y1)/2;
+      float x12 = (x1+x2)/2;
+      float y12 = (y1+y2)/2;
+      float x23 = (x2+x3)/2;
+      float y23 = (y2+y3)/2;
+
+      float xa = (x01+x12)/2;
+      float ya = (y01+y12)/2;
+      float xb = (x12+x23)/2;
+      float yb = (y12+y23)/2;
+
+      float mx = (xa+xb)/2;
+      float my = (ya+yb)/2;
+
+      stbtt__tesselate_cubic(points, num_points, x0,y0, x01,y01, xa,ya, mx,my, objspace_flatness_squared,n+1);
+      stbtt__tesselate_cubic(points, num_points, mx,my, xb,yb, x23,y23, x3,y3, objspace_flatness_squared,n+1);
+   } else {
+      stbtt__add_point(points, *num_points,x3,y3);
+      *num_points = *num_points+1;
+   }
+}
+
+// returns number of contours
+static stbtt__point *stbtt_FlattenCurves(stbtt_vertex *vertices, int num_verts, float objspace_flatness, int **contour_lengths, int *num_contours, void *userdata)
+{
+   stbtt__point *points=0;
+   int num_points=0;
+
+   float objspace_flatness_squared = objspace_flatness * objspace_flatness;
+   int i,n=0,start=0, pass;
+
+   // count how many "moves" there are to get the contour count
+   for (i=0; i < num_verts; ++i)
+      if (vertices[i].type == STBTT_vmove)
+         ++n;
+
+   *num_contours = n;
+   if (n == 0) return 0;
+
+   *contour_lengths = (int *) STBTT_malloc(sizeof(**contour_lengths) * n, userdata);
+
+   if (*contour_lengths == 0) {
+      *num_contours = 0;
+      return 0;
+   }
+
+   // make two passes through the points so we don't need to realloc
+   for (pass=0; pass < 2; ++pass) {
+      float x=0,y=0;
+      if (pass == 1) {
+         points = (stbtt__point *) STBTT_malloc(num_points * sizeof(points[0]), userdata);
+         if (points == NULL) goto error;
+      }
+      num_points = 0;
+      n= -1;
+      for (i=0; i < num_verts; ++i) {
+         switch (vertices[i].type) {
+            case STBTT_vmove:
+               // start the next contour
+               if (n >= 0)
+                  (*contour_lengths)[n] = num_points - start;
+               ++n;
+               start = num_points;
+
+               x = vertices[i].x, y = vertices[i].y;
+               stbtt__add_point(points, num_points++, x,y);
+               break;
+            case STBTT_vline:
+               x = vertices[i].x, y = vertices[i].y;
+               stbtt__add_point(points, num_points++, x, y);
+               break;
+            case STBTT_vcurve:
+               stbtt__tesselate_curve(points, &num_points, x,y,
+                                        vertices[i].cx, vertices[i].cy,
+                                        vertices[i].x,  vertices[i].y,
+                                        objspace_flatness_squared, 0);
+               x = vertices[i].x, y = vertices[i].y;
+               break;
+            case STBTT_vcubic:
+               stbtt__tesselate_cubic(points, &num_points, x,y,
+                                        vertices[i].cx, vertices[i].cy,
+                                        vertices[i].cx1, vertices[i].cy1,
+                                        vertices[i].x,  vertices[i].y,
+                                        objspace_flatness_squared, 0);
+               x = vertices[i].x, y = vertices[i].y;
+               break;
+         }
+      }
+      (*contour_lengths)[n] = num_points - start;
+   }
+
+   return points;
+error:
+   STBTT_free(points, userdata);
+   STBTT_free(*contour_lengths, userdata);
+   *contour_lengths = 0;
+   *num_contours = 0;
+   return NULL;
+}
+
+STBTT_DEF void stbtt_Rasterize(stbtt__bitmap *result, float flatness_in_pixels, stbtt_vertex *vertices, int num_verts, float scale_x, float scale_y, float shift_x, float shift_y, int x_off, int y_off, int invert, void *userdata)
+{
+   float scale            = scale_x > scale_y ? scale_y : scale_x;
+   int winding_count      = 0;
+   int *winding_lengths   = NULL;
+   stbtt__point *windings = stbtt_FlattenCurves(vertices, num_verts, flatness_in_pixels / scale, &winding_lengths, &winding_count, userdata);
+   if (windings) {
+      stbtt__rasterize(result, windings, winding_lengths, winding_count, scale_x, scale_y, shift_x, shift_y, x_off, y_off, invert, userdata);
+      STBTT_free(winding_lengths, userdata);
+      STBTT_free(windings, userdata);
+   }
+}
+
+STBTT_DEF void stbtt_FreeBitmap(unsigned char *bitmap, void *userdata)
+{
+   STBTT_free(bitmap, userdata);
+}
+
+STBTT_DEF unsigned char *stbtt_GetGlyphBitmapSubpixel(const stbtt_fontinfo *info, float scale_x, float scale_y, float shift_x, float shift_y, int glyph, int *width, int *height, int *xoff, int *yoff)
+{
+   int ix0,iy0,ix1,iy1;
+   stbtt__bitmap gbm;
+   stbtt_vertex *vertices;
+   int num_verts = stbtt_GetGlyphShape(info, glyph, &vertices);
+
+   if (scale_x == 0) scale_x = scale_y;
+   if (scale_y == 0) {
+      if (scale_x == 0) {
+         STBTT_free(vertices, info->userdata);
+         return NULL;
+      }
+      scale_y = scale_x;
+   }
+
+   stbtt_GetGlyphBitmapBoxSubpixel(info, glyph, scale_x, scale_y, shift_x, shift_y, &ix0,&iy0,&ix1,&iy1);
+
+   // now we get the size
+   gbm.w = (ix1 - ix0);
+   gbm.h = (iy1 - iy0);
+   gbm.pixels = NULL; // in case we error
+
+   if (width ) *width  = gbm.w;
+   if (height) *height = gbm.h;
+   if (xoff  ) *xoff   = ix0;
+   if (yoff  ) *yoff   = iy0;
+
+   if (gbm.w && gbm.h) {
+      gbm.pixels = (unsigned char *) STBTT_malloc(gbm.w * gbm.h, info->userdata);
+      if (gbm.pixels) {
+         gbm.stride = gbm.w;
+
+         stbtt_Rasterize(&gbm, 0.35f, vertices, num_verts, scale_x, scale_y, shift_x, shift_y, ix0, iy0, 1, info->userdata);
+      }
+   }
+   STBTT_free(vertices, info->userdata);
+   return gbm.pixels;
+}
+
+STBTT_DEF unsigned char *stbtt_GetGlyphBitmap(const stbtt_fontinfo *info, float scale_x, float scale_y, int glyph, int *width, int *height, int *xoff, int *yoff)
+{
+   return stbtt_GetGlyphBitmapSubpixel(info, scale_x, scale_y, 0.0f, 0.0f, glyph, width, height, xoff, yoff);
+}
+
+STBTT_DEF void stbtt_MakeGlyphBitmapSubpixel(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, float shift_x, float shift_y, int glyph)
+{
+   int ix0,iy0;
+   stbtt_vertex *vertices;
+   int num_verts = stbtt_GetGlyphShape(info, glyph, &vertices);
+   stbtt__bitmap gbm;
+
+   stbtt_GetGlyphBitmapBoxSubpixel(info, glyph, scale_x, scale_y, shift_x, shift_y, &ix0,&iy0,0,0);
+   gbm.pixels = output;
+   gbm.w = out_w;
+   gbm.h = out_h;
+   gbm.stride = out_stride;
+
+   if (gbm.w && gbm.h)
+      stbtt_Rasterize(&gbm, 0.35f, vertices, num_verts, scale_x, scale_y, shift_x, shift_y, ix0,iy0, 1, info->userdata);
+
+   STBTT_free(vertices, info->userdata);
+}
+
+STBTT_DEF void stbtt_MakeGlyphBitmap(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, int glyph)
+{
+   stbtt_MakeGlyphBitmapSubpixel(info, output, out_w, out_h, out_stride, scale_x, scale_y, 0.0f,0.0f, glyph);
+}
+
+STBTT_DEF unsigned char *stbtt_GetCodepointBitmapSubpixel(const stbtt_fontinfo *info, float scale_x, float scale_y, float shift_x, float shift_y, int codepoint, int *width, int *height, int *xoff, int *yoff)
+{
+   return stbtt_GetGlyphBitmapSubpixel(info, scale_x, scale_y,shift_x,shift_y, stbtt_FindGlyphIndex(info,codepoint), width,height,xoff,yoff);
+}
+
+STBTT_DEF void stbtt_MakeCodepointBitmapSubpixelPrefilter(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, float shift_x, float shift_y, int oversample_x, int oversample_y, float *sub_x, float *sub_y, int codepoint)
+{
+   stbtt_MakeGlyphBitmapSubpixelPrefilter(info, output, out_w, out_h, out_stride, scale_x, scale_y, shift_x, shift_y, oversample_x, oversample_y, sub_x, sub_y, stbtt_FindGlyphIndex(info,codepoint));
+}
+
+STBTT_DEF void stbtt_MakeCodepointBitmapSubpixel(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, float shift_x, float shift_y, int codepoint)
+{
+   stbtt_MakeGlyphBitmapSubpixel(info, output, out_w, out_h, out_stride, scale_x, scale_y, shift_x, shift_y, stbtt_FindGlyphIndex(info,codepoint));
+}
+
+STBTT_DEF unsigned char *stbtt_GetCodepointBitmap(const stbtt_fontinfo *info, float scale_x, float scale_y, int codepoint, int *width, int *height, int *xoff, int *yoff)
+{
+   return stbtt_GetCodepointBitmapSubpixel(info, scale_x, scale_y, 0.0f,0.0f, codepoint, width,height,xoff,yoff);
+}
+
+STBTT_DEF void stbtt_MakeCodepointBitmap(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, int codepoint)
+{
+   stbtt_MakeCodepointBitmapSubpixel(info, output, out_w, out_h, out_stride, scale_x, scale_y, 0.0f,0.0f, codepoint);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// bitmap baking
+//
+// This is SUPER-CRAPPY packing to keep source code small
+
+static int stbtt_BakeFontBitmap_internal(unsigned char *data, int offset,  // font location (use offset=0 for plain .ttf)
+                                float pixel_height,                     // height of font in pixels
+                                unsigned char *pixels, int pw, int ph,  // bitmap to be filled in
+                                int first_char, int num_chars,          // characters to bake
+                                stbtt_bakedchar *chardata)
+{
+   float scale;
+   int x,y,bottom_y, i;
+   stbtt_fontinfo f;
+   f.userdata = NULL;
+   if (!stbtt_InitFont(&f, data, offset))
+      return -1;
+   STBTT_memset(pixels, 0, pw*ph); // background of 0 around pixels
+   x=y=1;
+   bottom_y = 1;
+
+   scale = stbtt_ScaleForPixelHeight(&f, pixel_height);
+
+   for (i=0; i < num_chars; ++i) {
+      int advance, lsb, x0,y0,x1,y1,gw,gh;
+      int g = stbtt_FindGlyphIndex(&f, first_char + i);
+      stbtt_GetGlyphHMetrics(&f, g, &advance, &lsb);
+      stbtt_GetGlyphBitmapBox(&f, g, scale,scale, &x0,&y0,&x1,&y1);
+      gw = x1-x0;
+      gh = y1-y0;
+      if (x + gw + 1 >= pw)
+         y = bottom_y, x = 1; // advance to next row
+      if (y + gh + 1 >= ph) // check if it fits vertically AFTER potentially moving to next row
+         return -i;
+      STBTT_assert(x+gw < pw);
+      STBTT_assert(y+gh < ph);
+      stbtt_MakeGlyphBitmap(&f, pixels+x+y*pw, gw,gh,pw, scale,scale, g);
+      chardata[i].x0 = (stbtt_int16) x;
+      chardata[i].y0 = (stbtt_int16) y;
+      chardata[i].x1 = (stbtt_int16) (x + gw);
+      chardata[i].y1 = (stbtt_int16) (y + gh);
+      chardata[i].xadvance = scale * advance;
+      chardata[i].xoff     = (float) x0;
+      chardata[i].yoff     = (float) y0;
+      x = x + gw + 1;
+      if (y+gh+1 > bottom_y)
+         bottom_y = y+gh+1;
+   }
+   return bottom_y;
+}
+
+STBTT_DEF void stbtt_GetBakedQuad(const stbtt_bakedchar *chardata, int pw, int ph, int char_index, float *xpos, float *ypos, stbtt_aligned_quad *q, int opengl_fillrule)
+{
+   float d3d_bias = opengl_fillrule ? 0 : -0.5f;
+   float ipw = 1.0f / pw, iph = 1.0f / ph;
+   const stbtt_bakedchar *b = chardata + char_index;
+   int round_x = STBTT_ifloor((*xpos + b->xoff) + 0.5f);
+   int round_y = STBTT_ifloor((*ypos + b->yoff) + 0.5f);
+
+   q->x0 = round_x + d3d_bias;
+   q->y0 = round_y + d3d_bias;
+   q->x1 = round_x + b->x1 - b->x0 + d3d_bias;
+   q->y1 = round_y + b->y1 - b->y0 + d3d_bias;
+
+   q->s0 = b->x0 * ipw;
+   q->t0 = b->y0 * iph;
+   q->s1 = b->x1 * ipw;
+   q->t1 = b->y1 * iph;
+
+   *xpos += b->xadvance;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// rectangle packing replacement routines if you don't have stb_rect_pack.h
+//
+
+#ifndef STB_RECT_PACK_VERSION
+
+typedef int stbrp_coord;
+
+////////////////////////////////////////////////////////////////////////////////////
+//                                                                                //
+//                                                                                //
+// COMPILER WARNING ?!?!?                                                         //
+//                                                                                //
+//                                                                                //
+// if you get a compile warning due to these symbols being defined more than      //
+// once, move #include "stb_rect_pack.h" before #include "stb_truetype.h"         //
+//                                                                                //
+////////////////////////////////////////////////////////////////////////////////////
+
+typedef struct
+{
+   int width,height;
+   int x,y,bottom_y;
+} stbrp_context;
+
+typedef struct
+{
+   unsigned char x;
+} stbrp_node;
+
+struct stbrp_rect
+{
+   stbrp_coord x,y;
+   int id,w,h,was_packed;
+};
+
+static void stbrp_init_target(stbrp_context *con, int pw, int ph, stbrp_node *nodes, int num_nodes)
+{
+   con->width  = pw;
+   con->height = ph;
+   con->x = 0;
+   con->y = 0;
+   con->bottom_y = 0;
+   STBTT__NOTUSED(nodes);
+   STBTT__NOTUSED(num_nodes);
+}
+
+static void stbrp_pack_rects(stbrp_context *con, stbrp_rect *rects, int num_rects)
+{
+   int i;
+   for (i=0; i < num_rects; ++i) {
+      if (con->x + rects[i].w > con->width) {
+         con->x = 0;
+         con->y = con->bottom_y;
+      }
+      if (con->y + rects[i].h > con->height)
+         break;
+      rects[i].x = con->x;
+      rects[i].y = con->y;
+      rects[i].was_packed = 1;
+      con->x += rects[i].w;
+      if (con->y + rects[i].h > con->bottom_y)
+         con->bottom_y = con->y + rects[i].h;
+   }
+   for (   ; i < num_rects; ++i)
+      rects[i].was_packed = 0;
+}
+#endif
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// bitmap baking
+//
+// This is SUPER-AWESOME (tm Ryan Gordon) packing using stb_rect_pack.h. If
+// stb_rect_pack.h isn't available, it uses the BakeFontBitmap strategy.
+
+STBTT_DEF int stbtt_PackBegin(stbtt_pack_context *spc, unsigned char *pixels, int pw, int ph, int stride_in_bytes, int padding, void *alloc_context)
+{
+   stbrp_context *context = (stbrp_context *) STBTT_malloc(sizeof(*context)            ,alloc_context);
+   int            num_nodes = pw - padding;
+   stbrp_node    *nodes   = (stbrp_node    *) STBTT_malloc(sizeof(*nodes  ) * num_nodes,alloc_context);
+
+   if (context == NULL || nodes == NULL) {
+      if (context != NULL) STBTT_free(context, alloc_context);
+      if (nodes   != NULL) STBTT_free(nodes  , alloc_context);
+      return 0;
+   }
+
+   spc->user_allocator_context = alloc_context;
+   spc->width = pw;
+   spc->height = ph;
+   spc->pixels = pixels;
+   spc->pack_info = context;
+   spc->nodes = nodes;
+   spc->padding = padding;
+   spc->stride_in_bytes = stride_in_bytes != 0 ? stride_in_bytes : pw;
+   spc->h_oversample = 1;
+   spc->v_oversample = 1;
+   spc->skip_missing = 0;
+
+   stbrp_init_target(context, pw-padding, ph-padding, nodes, num_nodes);
+
+   if (pixels)
+      STBTT_memset(pixels, 0, pw*ph); // background of 0 around pixels
+
+   return 1;
+}
+
+STBTT_DEF void stbtt_PackEnd  (stbtt_pack_context *spc)
+{
+   STBTT_free(spc->nodes    , spc->user_allocator_context);
+   STBTT_free(spc->pack_info, spc->user_allocator_context);
+}
+
+STBTT_DEF void stbtt_PackSetOversampling(stbtt_pack_context *spc, unsigned int h_oversample, unsigned int v_oversample)
+{
+   STBTT_assert(h_oversample <= STBTT_MAX_OVERSAMPLE);
+   STBTT_assert(v_oversample <= STBTT_MAX_OVERSAMPLE);
+   if (h_oversample <= STBTT_MAX_OVERSAMPLE)
+      spc->h_oversample = h_oversample;
+   if (v_oversample <= STBTT_MAX_OVERSAMPLE)
+      spc->v_oversample = v_oversample;
+}
+
+STBTT_DEF void stbtt_PackSetSkipMissingCodepoints(stbtt_pack_context *spc, int skip)
+{
+   spc->skip_missing = skip;
+}
+
+#define STBTT__OVER_MASK  (STBTT_MAX_OVERSAMPLE-1)
+
+static void stbtt__h_prefilter(unsigned char *pixels, int w, int h, int stride_in_bytes, unsigned int kernel_width)
+{
+   unsigned char buffer[STBTT_MAX_OVERSAMPLE];
+   int safe_w = w - kernel_width;
+   int j;
+   STBTT_memset(buffer, 0, STBTT_MAX_OVERSAMPLE); // suppress bogus warning from VS2013 -analyze
+   for (j=0; j < h; ++j) {
+      int i;
+      unsigned int total;
+      STBTT_memset(buffer, 0, kernel_width);
+
+      total = 0;
+
+      // make kernel_width a constant in common cases so compiler can optimize out the divide
+      switch (kernel_width) {
+         case 2:
+            for (i=0; i <= safe_w; ++i) {
+               total += pixels[i] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i];
+               pixels[i] = (unsigned char) (total / 2);
+            }
+            break;
+         case 3:
+            for (i=0; i <= safe_w; ++i) {
+               total += pixels[i] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i];
+               pixels[i] = (unsigned char) (total / 3);
+            }
+            break;
+         case 4:
+            for (i=0; i <= safe_w; ++i) {
+               total += pixels[i] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i];
+               pixels[i] = (unsigned char) (total / 4);
+            }
+            break;
+         case 5:
+            for (i=0; i <= safe_w; ++i) {
+               total += pixels[i] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i];
+               pixels[i] = (unsigned char) (total / 5);
+            }
+            break;
+         default:
+            for (i=0; i <= safe_w; ++i) {
+               total += pixels[i] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i];
+               pixels[i] = (unsigned char) (total / kernel_width);
+            }
+            break;
+      }
+
+      for (; i < w; ++i) {
+         STBTT_assert(pixels[i] == 0);
+         total -= buffer[i & STBTT__OVER_MASK];
+         pixels[i] = (unsigned char) (total / kernel_width);
+      }
+
+      pixels += stride_in_bytes;
+   }
+}
+
+static void stbtt__v_prefilter(unsigned char *pixels, int w, int h, int stride_in_bytes, unsigned int kernel_width)
+{
+   unsigned char buffer[STBTT_MAX_OVERSAMPLE];
+   int safe_h = h - kernel_width;
+   int j;
+   STBTT_memset(buffer, 0, STBTT_MAX_OVERSAMPLE); // suppress bogus warning from VS2013 -analyze
+   for (j=0; j < w; ++j) {
+      int i;
+      unsigned int total;
+      STBTT_memset(buffer, 0, kernel_width);
+
+      total = 0;
+
+      // make kernel_width a constant in common cases so compiler can optimize out the divide
+      switch (kernel_width) {
+         case 2:
+            for (i=0; i <= safe_h; ++i) {
+               total += pixels[i*stride_in_bytes] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i*stride_in_bytes];
+               pixels[i*stride_in_bytes] = (unsigned char) (total / 2);
+            }
+            break;
+         case 3:
+            for (i=0; i <= safe_h; ++i) {
+               total += pixels[i*stride_in_bytes] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i*stride_in_bytes];
+               pixels[i*stride_in_bytes] = (unsigned char) (total / 3);
+            }
+            break;
+         case 4:
+            for (i=0; i <= safe_h; ++i) {
+               total += pixels[i*stride_in_bytes] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i*stride_in_bytes];
+               pixels[i*stride_in_bytes] = (unsigned char) (total / 4);
+            }
+            break;
+         case 5:
+            for (i=0; i <= safe_h; ++i) {
+               total += pixels[i*stride_in_bytes] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i*stride_in_bytes];
+               pixels[i*stride_in_bytes] = (unsigned char) (total / 5);
+            }
+            break;
+         default:
+            for (i=0; i <= safe_h; ++i) {
+               total += pixels[i*stride_in_bytes] - buffer[i & STBTT__OVER_MASK];
+               buffer[(i+kernel_width) & STBTT__OVER_MASK] = pixels[i*stride_in_bytes];
+               pixels[i*stride_in_bytes] = (unsigned char) (total / kernel_width);
+            }
+            break;
+      }
+
+      for (; i < h; ++i) {
+         STBTT_assert(pixels[i*stride_in_bytes] == 0);
+         total -= buffer[i & STBTT__OVER_MASK];
+         pixels[i*stride_in_bytes] = (unsigned char) (total / kernel_width);
+      }
+
+      pixels += 1;
+   }
+}
+
+static float stbtt__oversample_shift(int oversample)
+{
+   if (!oversample)
+      return 0.0f;
+
+   // The prefilter is a box filter of width "oversample",
+   // which shifts phase by (oversample - 1)/2 pixels in
+   // oversampled space. We want to shift in the opposite
+   // direction to counter this.
+   return (float)-(oversample - 1) / (2.0f * (float)oversample);
+}
+
+// rects array must be big enough to accommodate all characters in the given ranges
+STBTT_DEF int stbtt_PackFontRangesGatherRects(stbtt_pack_context *spc, const stbtt_fontinfo *info, stbtt_pack_range *ranges, int num_ranges, stbrp_rect *rects)
+{
+   int i,j,k;
+   int missing_glyph_added = 0;
+
+   k=0;
+   for (i=0; i < num_ranges; ++i) {
+      float fh = ranges[i].font_size;
+      float scale = fh > 0 ? stbtt_ScaleForPixelHeight(info, fh) : stbtt_ScaleForMappingEmToPixels(info, -fh);
+      ranges[i].h_oversample = (unsigned char) spc->h_oversample;
+      ranges[i].v_oversample = (unsigned char) spc->v_oversample;
+      for (j=0; j < ranges[i].num_chars; ++j) {
+         int x0,y0,x1,y1;
+         int codepoint = ranges[i].array_of_unicode_codepoints == NULL ? ranges[i].first_unicode_codepoint_in_range + j : ranges[i].array_of_unicode_codepoints[j];
+         int glyph = stbtt_FindGlyphIndex(info, codepoint);
+         if (glyph == 0 && (spc->skip_missing || missing_glyph_added)) {
+            rects[k].w = rects[k].h = 0;
+         } else {
+            stbtt_GetGlyphBitmapBoxSubpixel(info,glyph,
+                                            scale * spc->h_oversample,
+                                            scale * spc->v_oversample,
+                                            0,0,
+                                            &x0,&y0,&x1,&y1);
+            rects[k].w = (stbrp_coord) (x1-x0 + spc->padding + spc->h_oversample-1);
+            rects[k].h = (stbrp_coord) (y1-y0 + spc->padding + spc->v_oversample-1);
+            if (glyph == 0)
+               missing_glyph_added = 1;
+         }
+         ++k;
+      }
+   }
+
+   return k;
+}
+
+STBTT_DEF void stbtt_MakeGlyphBitmapSubpixelPrefilter(const stbtt_fontinfo *info, unsigned char *output, int out_w, int out_h, int out_stride, float scale_x, float scale_y, float shift_x, float shift_y, int prefilter_x, int prefilter_y, float *sub_x, float *sub_y, int glyph)
+{
+   stbtt_MakeGlyphBitmapSubpixel(info,
+                                 output,
+                                 out_w - (prefilter_x - 1),
+                                 out_h - (prefilter_y - 1),
+                                 out_stride,
+                                 scale_x,
+                                 scale_y,
+                                 shift_x,
+                                 shift_y,
+                                 glyph);
+
+   if (prefilter_x > 1)
+      stbtt__h_prefilter(output, out_w, out_h, out_stride, prefilter_x);
+
+   if (prefilter_y > 1)
+      stbtt__v_prefilter(output, out_w, out_h, out_stride, prefilter_y);
+
+   *sub_x = stbtt__oversample_shift(prefilter_x);
+   *sub_y = stbtt__oversample_shift(prefilter_y);
+}
+
+// rects array must be big enough to accommodate all characters in the given ranges
+STBTT_DEF int stbtt_PackFontRangesRenderIntoRects(stbtt_pack_context *spc, const stbtt_fontinfo *info, stbtt_pack_range *ranges, int num_ranges, stbrp_rect *rects)
+{
+   int i,j,k, missing_glyph = -1, return_value = 1;
+
+   // save current values
+   int old_h_over = spc->h_oversample;
+   int old_v_over = spc->v_oversample;
+
+   k = 0;
+   for (i=0; i < num_ranges; ++i) {
+      float fh = ranges[i].font_size;
+      float scale = fh > 0 ? stbtt_ScaleForPixelHeight(info, fh) : stbtt_ScaleForMappingEmToPixels(info, -fh);
+      float recip_h,recip_v,sub_x,sub_y;
+      spc->h_oversample = ranges[i].h_oversample;
+      spc->v_oversample = ranges[i].v_oversample;
+      recip_h = 1.0f / spc->h_oversample;
+      recip_v = 1.0f / spc->v_oversample;
+      sub_x = stbtt__oversample_shift(spc->h_oversample);
+      sub_y = stbtt__oversample_shift(spc->v_oversample);
+      for (j=0; j < ranges[i].num_chars; ++j) {
+         stbrp_rect *r = &rects[k];
+         if (r->was_packed && r->w != 0 && r->h != 0) {
+            stbtt_packedchar *bc = &ranges[i].chardata_for_range[j];
+            int advance, lsb, x0,y0,x1,y1;
+            int codepoint = ranges[i].array_of_unicode_codepoints == NULL ? ranges[i].first_unicode_codepoint_in_range + j : ranges[i].array_of_unicode_codepoints[j];
+            int glyph = stbtt_FindGlyphIndex(info, codepoint);
+            stbrp_coord pad = (stbrp_coord) spc->padding;
+
+            // pad on left and top
+            r->x += pad;
+            r->y += pad;
+            r->w -= pad;
+            r->h -= pad;
+            stbtt_GetGlyphHMetrics(info, glyph, &advance, &lsb);
+            stbtt_GetGlyphBitmapBox(info, glyph,
+                                    scale * spc->h_oversample,
+                                    scale * spc->v_oversample,
+                                    &x0,&y0,&x1,&y1);
+            stbtt_MakeGlyphBitmapSubpixel(info,
+                                          spc->pixels + r->x + r->y*spc->stride_in_bytes,
+                                          r->w - spc->h_oversample+1,
+                                          r->h - spc->v_oversample+1,
+                                          spc->stride_in_bytes,
+                                          scale * spc->h_oversample,
+                                          scale * spc->v_oversample,
+                                          0,0,
+                                          glyph);
+
+            if (spc->h_oversample > 1)
+               stbtt__h_prefilter(spc->pixels + r->x + r->y*spc->stride_in_bytes,
+                                  r->w, r->h, spc->stride_in_bytes,
+                                  spc->h_oversample);
+
+            if (spc->v_oversample > 1)
+               stbtt__v_prefilter(spc->pixels + r->x + r->y*spc->stride_in_bytes,
+                                  r->w, r->h, spc->stride_in_bytes,
+                                  spc->v_oversample);
+
+            bc->x0       = (stbtt_int16)  r->x;
+            bc->y0       = (stbtt_int16)  r->y;
+            bc->x1       = (stbtt_int16) (r->x + r->w);
+            bc->y1       = (stbtt_int16) (r->y + r->h);
+            bc->xadvance =                scale * advance;
+            bc->xoff     =       (float)  x0 * recip_h + sub_x;
+            bc->yoff     =       (float)  y0 * recip_v + sub_y;
+            bc->xoff2    =                (x0 + r->w) * recip_h + sub_x;
+            bc->yoff2    =                (y0 + r->h) * recip_v + sub_y;
+
+            if (glyph == 0)
+               missing_glyph = j;
+         } else if (spc->skip_missing) {
+            return_value = 0;
+         } else if (r->was_packed && r->w == 0 && r->h == 0 && missing_glyph >= 0) {
+            ranges[i].chardata_for_range[j] = ranges[i].chardata_for_range[missing_glyph];
+         } else {
+            return_value = 0; // if any fail, report failure
+         }
+
+         ++k;
+      }
+   }
+
+   // restore original values
+   spc->h_oversample = old_h_over;
+   spc->v_oversample = old_v_over;
+
+   return return_value;
+}
+
+STBTT_DEF void stbtt_PackFontRangesPackRects(stbtt_pack_context *spc, stbrp_rect *rects, int num_rects)
+{
+   stbrp_pack_rects((stbrp_context *) spc->pack_info, rects, num_rects);
+}
+
+STBTT_DEF int stbtt_PackFontRanges(stbtt_pack_context *spc, const unsigned char *fontdata, int font_index, stbtt_pack_range *ranges, int num_ranges)
+{
+   stbtt_fontinfo info;
+   int i,j,n, return_value = 1;
+   //stbrp_context *context = (stbrp_context *) spc->pack_info;
+   stbrp_rect    *rects;
+
+   // flag all characters as NOT packed
+   for (i=0; i < num_ranges; ++i)
+      for (j=0; j < ranges[i].num_chars; ++j)
+         ranges[i].chardata_for_range[j].x0 =
+         ranges[i].chardata_for_range[j].y0 =
+         ranges[i].chardata_for_range[j].x1 =
+         ranges[i].chardata_for_range[j].y1 = 0;
+
+   n = 0;
+   for (i=0; i < num_ranges; ++i)
+      n += ranges[i].num_chars;
+
+   rects = (stbrp_rect *) STBTT_malloc(sizeof(*rects) * n, spc->user_allocator_context);
+   if (rects == NULL)
+      return 0;
+
+   info.userdata = spc->user_allocator_context;
+   stbtt_InitFont(&info, fontdata, stbtt_GetFontOffsetForIndex(fontdata,font_index));
+
+   n = stbtt_PackFontRangesGatherRects(spc, &info, ranges, num_ranges, rects);
+
+   stbtt_PackFontRangesPackRects(spc, rects, n);
+
+   return_value = stbtt_PackFontRangesRenderIntoRects(spc, &info, ranges, num_ranges, rects);
+
+   STBTT_free(rects, spc->user_allocator_context);
+   return return_value;
+}
+
+STBTT_DEF int stbtt_PackFontRange(stbtt_pack_context *spc, const unsigned char *fontdata, int font_index, float font_size,
+            int first_unicode_codepoint_in_range, int num_chars_in_range, stbtt_packedchar *chardata_for_range)
+{
+   stbtt_pack_range range;
+   range.first_unicode_codepoint_in_range = first_unicode_codepoint_in_range;
+   range.array_of_unicode_codepoints = NULL;
+   range.num_chars                   = num_chars_in_range;
+   range.chardata_for_range          = chardata_for_range;
+   range.font_size                   = font_size;
+   return stbtt_PackFontRanges(spc, fontdata, font_index, &range, 1);
+}
+
+STBTT_DEF void stbtt_GetScaledFontVMetrics(const unsigned char *fontdata, int index, float size, float *ascent, float *descent, float *lineGap)
+{
+   int i_ascent, i_descent, i_lineGap;
+   float scale;
+   stbtt_fontinfo info;
+   stbtt_InitFont(&info, fontdata, stbtt_GetFontOffsetForIndex(fontdata, index));
+   scale = size > 0 ? stbtt_ScaleForPixelHeight(&info, size) : stbtt_ScaleForMappingEmToPixels(&info, -size);
+   stbtt_GetFontVMetrics(&info, &i_ascent, &i_descent, &i_lineGap);
+   *ascent  = (float) i_ascent  * scale;
+   *descent = (float) i_descent * scale;
+   *lineGap = (float) i_lineGap * scale;
+}
+
+STBTT_DEF void stbtt_GetPackedQuad(const stbtt_packedchar *chardata, int pw, int ph, int char_index, float *xpos, float *ypos, stbtt_aligned_quad *q, int align_to_integer)
+{
+   float ipw = 1.0f / pw, iph = 1.0f / ph;
+   const stbtt_packedchar *b = chardata + char_index;
+
+   if (align_to_integer) {
+      float x = (float) STBTT_ifloor((*xpos + b->xoff) + 0.5f);
+      float y = (float) STBTT_ifloor((*ypos + b->yoff) + 0.5f);
+      q->x0 = x;
+      q->y0 = y;
+      q->x1 = x + b->xoff2 - b->xoff;
+      q->y1 = y + b->yoff2 - b->yoff;
+   } else {
+      q->x0 = *xpos + b->xoff;
+      q->y0 = *ypos + b->yoff;
+      q->x1 = *xpos + b->xoff2;
+      q->y1 = *ypos + b->yoff2;
+   }
+
+   q->s0 = b->x0 * ipw;
+   q->t0 = b->y0 * iph;
+   q->s1 = b->x1 * ipw;
+   q->t1 = b->y1 * iph;
+
+   *xpos += b->xadvance;
+}
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// sdf computation
+//
+
+#define STBTT_min(a,b)  ((a) < (b) ? (a) : (b))
+#define STBTT_max(a,b)  ((a) < (b) ? (b) : (a))
+
+static int stbtt__ray_intersect_bezier(float orig[2], float ray[2], float q0[2], float q1[2], float q2[2], float hits[2][2])
+{
+   float q0perp = q0[1]*ray[0] - q0[0]*ray[1];
+   float q1perp = q1[1]*ray[0] - q1[0]*ray[1];
+   float q2perp = q2[1]*ray[0] - q2[0]*ray[1];
+   float roperp = orig[1]*ray[0] - orig[0]*ray[1];
+
+   float a = q0perp - 2*q1perp + q2perp;
+   float b = q1perp - q0perp;
+   float c = q0perp - roperp;
+
+   float s0 = 0., s1 = 0.;
+   int num_s = 0;
+
+   if (a != 0.0) {
+      float discr = b*b - a*c;
+      if (discr > 0.0) {
+         float rcpna = -1 / a;
+         float d = (float) STBTT_sqrt(discr);
+         s0 = (b+d) * rcpna;
+         s1 = (b-d) * rcpna;
+         if (s0 >= 0.0 && s0 <= 1.0)
+            num_s = 1;
+         if (d > 0.0 && s1 >= 0.0 && s1 <= 1.0) {
+            if (num_s == 0) s0 = s1;
+            ++num_s;
+         }
+      }
+   } else {
+      // 2*b*s + c = 0
+      // s = -c / (2*b)
+      s0 = c / (-2 * b);
+      if (s0 >= 0.0 && s0 <= 1.0)
+         num_s = 1;
+   }
+
+   if (num_s == 0)
+      return 0;
+   else {
+      float rcp_len2 = 1 / (ray[0]*ray[0] + ray[1]*ray[1]);
+      float rayn_x = ray[0] * rcp_len2, rayn_y = ray[1] * rcp_len2;
+
+      float q0d =   q0[0]*rayn_x +   q0[1]*rayn_y;
+      float q1d =   q1[0]*rayn_x +   q1[1]*rayn_y;
+      float q2d =   q2[0]*rayn_x +   q2[1]*rayn_y;
+      float rod = orig[0]*rayn_x + orig[1]*rayn_y;
+
+      float q10d = q1d - q0d;
+      float q20d = q2d - q0d;
+      float q0rd = q0d - rod;
+
+      hits[0][0] = q0rd + s0*(2.0f - 2.0f*s0)*q10d + s0*s0*q20d;
+      hits[0][1] = a*s0+b;
+
+      if (num_s > 1) {
+         hits[1][0] = q0rd + s1*(2.0f - 2.0f*s1)*q10d + s1*s1*q20d;
+         hits[1][1] = a*s1+b;
+         return 2;
+      } else {
+         return 1;
+      }
+   }
+}
+
+static int equal(float *a, float *b)
+{
+   return (a[0] == b[0] && a[1] == b[1]);
+}
+
+static int stbtt__compute_crossings_x(float x, float y, int nverts, stbtt_vertex *verts)
+{
+   int i;
+   float orig[2], ray[2] = { 1, 0 };
+   float y_frac;
+   int winding = 0;
+
+   orig[0] = x;
+   orig[1] = y;
+
+   // make sure y never passes through a vertex of the shape
+   y_frac = (float) STBTT_fmod(y, 1.0f);
+   if (y_frac < 0.01f)
+      y += 0.01f;
+   else if (y_frac > 0.99f)
+      y -= 0.01f;
+   orig[1] = y;
+
+   // test a ray from (-infinity,y) to (x,y)
+   for (i=0; i < nverts; ++i) {
+      if (verts[i].type == STBTT_vline) {
+         int x0 = (int) verts[i-1].x, y0 = (int) verts[i-1].y;
+         int x1 = (int) verts[i  ].x, y1 = (int) verts[i  ].y;
+         if (y > STBTT_min(y0,y1) && y < STBTT_max(y0,y1) && x > STBTT_min(x0,x1)) {
+            float x_inter = (y - y0) / (y1 - y0) * (x1-x0) + x0;
+            if (x_inter < x)
+               winding += (y0 < y1) ? 1 : -1;
+         }
+      }
+      if (verts[i].type == STBTT_vcurve) {
+         int x0 = (int) verts[i-1].x , y0 = (int) verts[i-1].y ;
+         int x1 = (int) verts[i  ].cx, y1 = (int) verts[i  ].cy;
+         int x2 = (int) verts[i  ].x , y2 = (int) verts[i  ].y ;
+         int ax = STBTT_min(x0,STBTT_min(x1,x2)), ay = STBTT_min(y0,STBTT_min(y1,y2));
+         int by = STBTT_max(y0,STBTT_max(y1,y2));
+         if (y > ay && y < by && x > ax) {
+            float q0[2],q1[2],q2[2];
+            float hits[2][2];
+            q0[0] = (float)x0;
+            q0[1] = (float)y0;
+            q1[0] = (float)x1;
+            q1[1] = (float)y1;
+            q2[0] = (float)x2;
+            q2[1] = (float)y2;
+            if (equal(q0,q1) || equal(q1,q2)) {
+               x0 = (int)verts[i-1].x;
+               y0 = (int)verts[i-1].y;
+               x1 = (int)verts[i  ].x;
+               y1 = (int)verts[i  ].y;
+               if (y > STBTT_min(y0,y1) && y < STBTT_max(y0,y1) && x > STBTT_min(x0,x1)) {
+                  float x_inter = (y - y0) / (y1 - y0) * (x1-x0) + x0;
+                  if (x_inter < x)
+                     winding += (y0 < y1) ? 1 : -1;
+               }
+            } else {
+               int num_hits = stbtt__ray_intersect_bezier(orig, ray, q0, q1, q2, hits);
+               if (num_hits >= 1)
+                  if (hits[0][0] < 0)
+                     winding += (hits[0][1] < 0 ? -1 : 1);
+               if (num_hits >= 2)
+                  if (hits[1][0] < 0)
+                     winding += (hits[1][1] < 0 ? -1 : 1);
+            }
+         }
+      }
+   }
+   return winding;
+}
+
+static float stbtt__cuberoot( float x )
+{
+   if (x<0)
+      return -(float) STBTT_pow(-x,1.0f/3.0f);
+   else
+      return  (float) STBTT_pow( x,1.0f/3.0f);
+}
+
+// x^3 + c*x^2 + b*x + a = 0
+static int stbtt__solve_cubic(float a, float b, float c, float* r)
+{
+	float s = -a / 3;
+	float p = b - a*a / 3;
+	float q = a * (2*a*a - 9*b) / 27 + c;
+   float p3 = p*p*p;
+	float d = q*q + 4*p3 / 27;
+	if (d >= 0) {
+		float z = (float) STBTT_sqrt(d);
+		float u = (-q + z) / 2;
+		float v = (-q - z) / 2;
+		u = stbtt__cuberoot(u);
+		v = stbtt__cuberoot(v);
+		r[0] = s + u + v;
+		return 1;
+	} else {
+	   float u = (float) STBTT_sqrt(-p/3);
+	   float v = (float) STBTT_acos(-STBTT_sqrt(-27/p3) * q / 2) / 3; // p3 must be negative, since d is negative
+	   float m = (float) STBTT_cos(v);
+      float n = (float) STBTT_cos(v-3.141592/2)*1.732050808f;
+	   r[0] = s + u * 2 * m;
+	   r[1] = s - u * (m + n);
+	   r[2] = s - u * (m - n);
+
+      //STBTT_assert( STBTT_fabs(((r[0]+a)*r[0]+b)*r[0]+c) < 0.05f);  // these asserts may not be safe at all scales, though they're in bezier t parameter units so maybe?
+      //STBTT_assert( STBTT_fabs(((r[1]+a)*r[1]+b)*r[1]+c) < 0.05f);
+      //STBTT_assert( STBTT_fabs(((r[2]+a)*r[2]+b)*r[2]+c) < 0.05f);
+   	return 3;
+   }
+}
+
+STBTT_DEF unsigned char * stbtt_GetGlyphSDF(const stbtt_fontinfo *info, float scale, int glyph, int padding, unsigned char onedge_value, float pixel_dist_scale, int *width, int *height, int *xoff, int *yoff)
+{
+   float scale_x = scale, scale_y = scale;
+   int ix0,iy0,ix1,iy1;
+   int w,h;
+   unsigned char *data;
+
+   if (scale == 0) return NULL;
+
+   stbtt_GetGlyphBitmapBoxSubpixel(info, glyph, scale, scale, 0.0f,0.0f, &ix0,&iy0,&ix1,&iy1);
+
+   // if empty, return NULL
+   if (ix0 == ix1 || iy0 == iy1)
+      return NULL;
+
+   ix0 -= padding;
+   iy0 -= padding;
+   ix1 += padding;
+   iy1 += padding;
+
+   w = (ix1 - ix0);
+   h = (iy1 - iy0);
+
+   if (width ) *width  = w;
+   if (height) *height = h;
+   if (xoff  ) *xoff   = ix0;
+   if (yoff  ) *yoff   = iy0;
+
+   // invert for y-downwards bitmaps
+   scale_y = -scale_y;
+
+   {
+      int x,y,i,j;
+      float *precompute;
+      stbtt_vertex *verts;
+      int num_verts = stbtt_GetGlyphShape(info, glyph, &verts);
+      data = (unsigned char *) STBTT_malloc(w * h, info->userdata);
+      precompute = (float *) STBTT_malloc(num_verts * sizeof(float), info->userdata);
+
+      for (i=0,j=num_verts-1; i < num_verts; j=i++) {
+         if (verts[i].type == STBTT_vline) {
+            float x0 = verts[i].x*scale_x, y0 = verts[i].y*scale_y;
+            float x1 = verts[j].x*scale_x, y1 = verts[j].y*scale_y;
+            float dist = (float) STBTT_sqrt((x1-x0)*(x1-x0) + (y1-y0)*(y1-y0));
+            precompute[i] = (dist == 0) ? 0.0f : 1.0f / dist;
+         } else if (verts[i].type == STBTT_vcurve) {
+            float x2 = verts[j].x *scale_x, y2 = verts[j].y *scale_y;
+            float x1 = verts[i].cx*scale_x, y1 = verts[i].cy*scale_y;
+            float x0 = verts[i].x *scale_x, y0 = verts[i].y *scale_y;
+            float bx = x0 - 2*x1 + x2, by = y0 - 2*y1 + y2;
+            float len2 = bx*bx + by*by;
+            if (len2 != 0.0f)
+               precompute[i] = 1.0f / (bx*bx + by*by);
+            else
+               precompute[i] = 0.0f;
+         } else
+            precompute[i] = 0.0f;
+      }
+
+      for (y=iy0; y < iy1; ++y) {
+         for (x=ix0; x < ix1; ++x) {
+            float val;
+            float min_dist = 999999.0f;
+            float sx = (float) x + 0.5f;
+            float sy = (float) y + 0.5f;
+            float x_gspace = (sx / scale_x);
+            float y_gspace = (sy / scale_y);
+
+            int winding = stbtt__compute_crossings_x(x_gspace, y_gspace, num_verts, verts); // @OPTIMIZE: this could just be a rasterization, but needs to be line vs. non-tesselated curves so a new path
+
+            for (i=0; i < num_verts; ++i) {
+               float x0 = verts[i].x*scale_x, y0 = verts[i].y*scale_y;
+
+               // check against every point here rather than inside line/curve primitives -- @TODO: wrong if multiple 'moves' in a row produce a garbage point, and given culling, probably more efficient to do within line/curve
+               float dist2 = (x0-sx)*(x0-sx) + (y0-sy)*(y0-sy);
+               if (dist2 < min_dist*min_dist)
+                  min_dist = (float) STBTT_sqrt(dist2);
+
+               if (verts[i].type == STBTT_vline) {
+                  float x1 = verts[i-1].x*scale_x, y1 = verts[i-1].y*scale_y;
+
+                  // coarse culling against bbox
+                  //if (sx > STBTT_min(x0,x1)-min_dist && sx < STBTT_max(x0,x1)+min_dist &&
+                  //    sy > STBTT_min(y0,y1)-min_dist && sy < STBTT_max(y0,y1)+min_dist)
+                  float dist = (float) STBTT_fabs((x1-x0)*(y0-sy) - (y1-y0)*(x0-sx)) * precompute[i];
+                  STBTT_assert(i != 0);
+                  if (dist < min_dist) {
+                     // check position along line
+                     // x' = x0 + t*(x1-x0), y' = y0 + t*(y1-y0)
+                     // minimize (x'-sx)*(x'-sx)+(y'-sy)*(y'-sy)
+                     float dx = x1-x0, dy = y1-y0;
+                     float px = x0-sx, py = y0-sy;
+                     // minimize (px+t*dx)^2 + (py+t*dy)^2 = px*px + 2*px*dx*t + t^2*dx*dx + py*py + 2*py*dy*t + t^2*dy*dy
+                     // derivative: 2*px*dx + 2*py*dy + (2*dx*dx+2*dy*dy)*t, set to 0 and solve
+                     float t = -(px*dx + py*dy) / (dx*dx + dy*dy);
+                     if (t >= 0.0f && t <= 1.0f)
+                        min_dist = dist;
+                  }
+               } else if (verts[i].type == STBTT_vcurve) {
+                  float x2 = verts[i-1].x *scale_x, y2 = verts[i-1].y *scale_y;
+                  float x1 = verts[i  ].cx*scale_x, y1 = verts[i  ].cy*scale_y;
+                  float box_x0 = STBTT_min(STBTT_min(x0,x1),x2);
+                  float box_y0 = STBTT_min(STBTT_min(y0,y1),y2);
+                  float box_x1 = STBTT_max(STBTT_max(x0,x1),x2);
+                  float box_y1 = STBTT_max(STBTT_max(y0,y1),y2);
+                  // coarse culling against bbox to avoid computing cubic unnecessarily
+                  if (sx > box_x0-min_dist && sx < box_x1+min_dist && sy > box_y0-min_dist && sy < box_y1+min_dist) {
+                     int num=0;
+                     float ax = x1-x0, ay = y1-y0;
+                     float bx = x0 - 2*x1 + x2, by = y0 - 2*y1 + y2;
+                     float mx = x0 - sx, my = y0 - sy;
+                     float res[3],px,py,t,it;
+                     float a_inv = precompute[i];
+                     if (a_inv == 0.0) { // if a_inv is 0, it's 2nd degree so use quadratic formula
+                        float a = 3*(ax*bx + ay*by);
+                        float b = 2*(ax*ax + ay*ay) + (mx*bx+my*by);
+                        float c = mx*ax+my*ay;
+                        if (a == 0.0) { // if a is 0, it's linear
+                           if (b != 0.0) {
+                              res[num++] = -c/b;
+                           }
+                        } else {
+                           float discriminant = b*b - 4*a*c;
+                           if (discriminant < 0)
+                              num = 0;
+                           else {
+                              float root = (float) STBTT_sqrt(discriminant);
+                              res[0] = (-b - root)/(2*a);
+                              res[1] = (-b + root)/(2*a);
+                              num = 2; // don't bother distinguishing 1-solution case, as code below will still work
+                           }
+                        }
+                     } else {
+                        float b = 3*(ax*bx + ay*by) * a_inv; // could precompute this as it doesn't depend on sample point
+                        float c = (2*(ax*ax + ay*ay) + (mx*bx+my*by)) * a_inv;
+                        float d = (mx*ax+my*ay) * a_inv;
+                        num = stbtt__solve_cubic(b, c, d, res);
+                     }
+                     if (num >= 1 && res[0] >= 0.0f && res[0] <= 1.0f) {
+                        t = res[0], it = 1.0f - t;
+                        px = it*it*x0 + 2*t*it*x1 + t*t*x2;
+                        py = it*it*y0 + 2*t*it*y1 + t*t*y2;
+                        dist2 = (px-sx)*(px-sx) + (py-sy)*(py-sy);
+                        if (dist2 < min_dist * min_dist)
+                           min_dist = (float) STBTT_sqrt(dist2);
+                     }
+                     if (num >= 2 && res[1] >= 0.0f && res[1] <= 1.0f) {
+                        t = res[1], it = 1.0f - t;
+                        px = it*it*x0 + 2*t*it*x1 + t*t*x2;
+                        py = it*it*y0 + 2*t*it*y1 + t*t*y2;
+                        dist2 = (px-sx)*(px-sx) + (py-sy)*(py-sy);
+                        if (dist2 < min_dist * min_dist)
+                           min_dist = (float) STBTT_sqrt(dist2);
+                     }
+                     if (num >= 3 && res[2] >= 0.0f && res[2] <= 1.0f) {
+                        t = res[2], it = 1.0f - t;
+                        px = it*it*x0 + 2*t*it*x1 + t*t*x2;
+                        py = it*it*y0 + 2*t*it*y1 + t*t*y2;
+                        dist2 = (px-sx)*(px-sx) + (py-sy)*(py-sy);
+                        if (dist2 < min_dist * min_dist)
+                           min_dist = (float) STBTT_sqrt(dist2);
+                     }
+                  }
+               }
+            }
+            if (winding == 0)
+               min_dist = -min_dist;  // if outside the shape, value is negative
+            val = onedge_value + pixel_dist_scale * min_dist;
+            if (val < 0)
+               val = 0;
+            else if (val > 255)
+               val = 255;
+            data[(y-iy0)*w+(x-ix0)] = (unsigned char) val;
+         }
+      }
+      STBTT_free(precompute, info->userdata);
+      STBTT_free(verts, info->userdata);
+   }
+   return data;
+}
+
+STBTT_DEF unsigned char * stbtt_GetCodepointSDF(const stbtt_fontinfo *info, float scale, int codepoint, int padding, unsigned char onedge_value, float pixel_dist_scale, int *width, int *height, int *xoff, int *yoff)
+{
+   return stbtt_GetGlyphSDF(info, scale, stbtt_FindGlyphIndex(info, codepoint), padding, onedge_value, pixel_dist_scale, width, height, xoff, yoff);
+}
+
+STBTT_DEF void stbtt_FreeSDF(unsigned char *bitmap, void *userdata)
+{
+   STBTT_free(bitmap, userdata);
+}
+
+//////////////////////////////////////////////////////////////////////////////
+//
+// font name matching -- recommended not to use this
+//
+
+// check if a utf8 string contains a prefix which is the utf16 string; if so return length of matching utf8 string
+static stbtt_int32 stbtt__CompareUTF8toUTF16_bigendian_prefix(stbtt_uint8 *s1, stbtt_int32 len1, stbtt_uint8 *s2, stbtt_int32 len2)
+{
+   stbtt_int32 i=0;
+
+   // convert utf16 to utf8 and compare the results while converting
+   while (len2) {
+      stbtt_uint16 ch = s2[0]*256 + s2[1];
+      if (ch < 0x80) {
+         if (i >= len1) return -1;
+         if (s1[i++] != ch) return -1;
+      } else if (ch < 0x800) {
+         if (i+1 >= len1) return -1;
+         if (s1[i++] != 0xc0 + (ch >> 6)) return -1;
+         if (s1[i++] != 0x80 + (ch & 0x3f)) return -1;
+      } else if (ch >= 0xd800 && ch < 0xdc00) {
+         stbtt_uint32 c;
+         stbtt_uint16 ch2 = s2[2]*256 + s2[3];
+         if (i+3 >= len1) return -1;
+         c = ((ch - 0xd800) << 10) + (ch2 - 0xdc00) + 0x10000;
+         if (s1[i++] != 0xf0 + (c >> 18)) return -1;
+         if (s1[i++] != 0x80 + ((c >> 12) & 0x3f)) return -1;
+         if (s1[i++] != 0x80 + ((c >>  6) & 0x3f)) return -1;
+         if (s1[i++] != 0x80 + ((c      ) & 0x3f)) return -1;
+         s2 += 2; // plus another 2 below
+         len2 -= 2;
+      } else if (ch >= 0xdc00 && ch < 0xe000) {
+         return -1;
+      } else {
+         if (i+2 >= len1) return -1;
+         if (s1[i++] != 0xe0 + (ch >> 12)) return -1;
+         if (s1[i++] != 0x80 + ((ch >> 6) & 0x3f)) return -1;
+         if (s1[i++] != 0x80 + ((ch     ) & 0x3f)) return -1;
+      }
+      s2 += 2;
+      len2 -= 2;
+   }
+   return i;
+}
+
+static int stbtt_CompareUTF8toUTF16_bigendian_internal(char *s1, int len1, char *s2, int len2)
+{
+   return len1 == stbtt__CompareUTF8toUTF16_bigendian_prefix((stbtt_uint8*) s1, len1, (stbtt_uint8*) s2, len2);
+}
+
+// returns results in whatever encoding you request... but note that 2-byte encodings
+// will be BIG-ENDIAN... use stbtt_CompareUTF8toUTF16_bigendian() to compare
+STBTT_DEF const char *stbtt_GetFontNameString(const stbtt_fontinfo *font, int *length, int platformID, int encodingID, int languageID, int nameID)
+{
+   stbtt_int32 i,count,stringOffset;
+   stbtt_uint8 *fc = font->data;
+   stbtt_uint32 offset = font->fontstart;
+   stbtt_uint32 nm = stbtt__find_table(fc, offset, "name");
+   if (!nm) return NULL;
+
+   count = ttUSHORT(fc+nm+2);
+   stringOffset = nm + ttUSHORT(fc+nm+4);
+   for (i=0; i < count; ++i) {
+      stbtt_uint32 loc = nm + 6 + 12 * i;
+      if (platformID == ttUSHORT(fc+loc+0) && encodingID == ttUSHORT(fc+loc+2)
+          && languageID == ttUSHORT(fc+loc+4) && nameID == ttUSHORT(fc+loc+6)) {
+         *length = ttUSHORT(fc+loc+8);
+         return (const char *) (fc+stringOffset+ttUSHORT(fc+loc+10));
+      }
+   }
+   return NULL;
+}
+
+static int stbtt__matchpair(stbtt_uint8 *fc, stbtt_uint32 nm, stbtt_uint8 *name, stbtt_int32 nlen, stbtt_int32 target_id, stbtt_int32 next_id)
+{
+   stbtt_int32 i;
+   stbtt_int32 count = ttUSHORT(fc+nm+2);
+   stbtt_int32 stringOffset = nm + ttUSHORT(fc+nm+4);
+
+   for (i=0; i < count; ++i) {
+      stbtt_uint32 loc = nm + 6 + 12 * i;
+      stbtt_int32 id = ttUSHORT(fc+loc+6);
+      if (id == target_id) {
+         // find the encoding
+         stbtt_int32 platform = ttUSHORT(fc+loc+0), encoding = ttUSHORT(fc+loc+2), language = ttUSHORT(fc+loc+4);
+
+         // is this a Unicode encoding?
+         if (platform == 0 || (platform == 3 && encoding == 1) || (platform == 3 && encoding == 10)) {
+            stbtt_int32 slen = ttUSHORT(fc+loc+8);
+            stbtt_int32 off = ttUSHORT(fc+loc+10);
+
+            // check if there's a prefix match
+            stbtt_int32 matchlen = stbtt__CompareUTF8toUTF16_bigendian_prefix(name, nlen, fc+stringOffset+off,slen);
+            if (matchlen >= 0) {
+               // check for target_id+1 immediately following, with same encoding & language
+               if (i+1 < count && ttUSHORT(fc+loc+12+6) == next_id && ttUSHORT(fc+loc+12) == platform && ttUSHORT(fc+loc+12+2) == encoding && ttUSHORT(fc+loc+12+4) == language) {
+                  slen = ttUSHORT(fc+loc+12+8);
+                  off = ttUSHORT(fc+loc+12+10);
+                  if (slen == 0) {
+                     if (matchlen == nlen)
+                        return 1;
+                  } else if (matchlen < nlen && name[matchlen] == ' ') {
+                     ++matchlen;
+                     if (stbtt_CompareUTF8toUTF16_bigendian_internal((char*) (name+matchlen), nlen-matchlen, (char*)(fc+stringOffset+off),slen))
+                        return 1;
+                  }
+               } else {
+                  // if nothing immediately following
+                  if (matchlen == nlen)
+                     return 1;
+               }
+            }
+         }
+
+         // @TODO handle other encodings
+      }
+   }
+   return 0;
+}
+
+static int stbtt__matches(stbtt_uint8 *fc, stbtt_uint32 offset, stbtt_uint8 *name, stbtt_int32 flags)
+{
+   stbtt_int32 nlen = (stbtt_int32) STBTT_strlen((char *) name);
+   stbtt_uint32 nm,hd;
+   if (!stbtt__isfont(fc+offset)) return 0;
+
+   // check italics/bold/underline flags in macStyle...
+   if (flags) {
+      hd = stbtt__find_table(fc, offset, "head");
+      if ((ttUSHORT(fc+hd+44) & 7) != (flags & 7)) return 0;
+   }
+
+   nm = stbtt__find_table(fc, offset, "name");
+   if (!nm) return 0;
+
+   if (flags) {
+      // if we checked the macStyle flags, then just check the family and ignore the subfamily
+      if (stbtt__matchpair(fc, nm, name, nlen, 16, -1))  return 1;
+      if (stbtt__matchpair(fc, nm, name, nlen,  1, -1))  return 1;
+      if (stbtt__matchpair(fc, nm, name, nlen,  3, -1))  return 1;
+   } else {
+      if (stbtt__matchpair(fc, nm, name, nlen, 16, 17))  return 1;
+      if (stbtt__matchpair(fc, nm, name, nlen,  1,  2))  return 1;
+      if (stbtt__matchpair(fc, nm, name, nlen,  3, -1))  return 1;
+   }
+
+   return 0;
+}
+
+static int stbtt_FindMatchingFont_internal(unsigned char *font_collection, char *name_utf8, stbtt_int32 flags)
+{
+   stbtt_int32 i;
+   for (i=0;;++i) {
+      stbtt_int32 off = stbtt_GetFontOffsetForIndex(font_collection, i);
+      if (off < 0) return off;
+      if (stbtt__matches((stbtt_uint8 *) font_collection, off, (stbtt_uint8*) name_utf8, flags))
+         return off;
+   }
+}
+
+#if defined(__GNUC__) || defined(__clang__)
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wcast-qual"
+#endif
+
+STBTT_DEF int stbtt_BakeFontBitmap(const unsigned char *data, int offset,
+                                float pixel_height, unsigned char *pixels, int pw, int ph,
+                                int first_char, int num_chars, stbtt_bakedchar *chardata)
+{
+   return stbtt_BakeFontBitmap_internal((unsigned char *) data, offset, pixel_height, pixels, pw, ph, first_char, num_chars, chardata);
+}
+
+STBTT_DEF int stbtt_GetFontOffsetForIndex(const unsigned char *data, int index)
+{
+   return stbtt_GetFontOffsetForIndex_internal((unsigned char *) data, index);
+}
+
+STBTT_DEF int stbtt_GetNumberOfFonts(const unsigned char *data)
+{
+   return stbtt_GetNumberOfFonts_internal((unsigned char *) data);
+}
+
+STBTT_DEF int stbtt_InitFont(stbtt_fontinfo *info, const unsigned char *data, int offset)
+{
+   return stbtt_InitFont_internal(info, (unsigned char *) data, offset);
+}
+
+STBTT_DEF int stbtt_FindMatchingFont(const unsigned char *fontdata, const char *name, int flags)
+{
+   return stbtt_FindMatchingFont_internal((unsigned char *) fontdata, (char *) name, flags);
+}
+
+STBTT_DEF int stbtt_CompareUTF8toUTF16_bigendian(const char *s1, int len1, const char *s2, int len2)
+{
+   return stbtt_CompareUTF8toUTF16_bigendian_internal((char *) s1, len1, (char *) s2, len2);
+}
+
+#if defined(__GNUC__) || defined(__clang__)
+#pragma GCC diagnostic pop
+#endif
+
+#endif // STB_TRUETYPE_IMPLEMENTATION
+
+
+// FULL VERSION HISTORY
+//
+//   1.19 (2018-02-11) OpenType GPOS kerning (horizontal only), STBTT_fmod
+//   1.18 (2018-01-29) add missing function
+//   1.17 (2017-07-23) make more arguments const; doc fix
+//   1.16 (2017-07-12) SDF support
+//   1.15 (2017-03-03) make more arguments const
+//   1.14 (2017-01-16) num-fonts-in-TTC function
+//   1.13 (2017-01-02) support OpenType fonts, certain Apple fonts
+//   1.12 (2016-10-25) suppress warnings about casting away const with -Wcast-qual
+//   1.11 (2016-04-02) fix unused-variable warning
+//   1.10 (2016-04-02) allow user-defined fabs() replacement
+//                     fix memory leak if fontsize=0.0
+//                     fix warning from duplicate typedef
+//   1.09 (2016-01-16) warning fix; avoid crash on outofmem; use alloc userdata for PackFontRanges
+//   1.08 (2015-09-13) document stbtt_Rasterize(); fixes for vertical & horizontal edges
+//   1.07 (2015-08-01) allow PackFontRanges to accept arrays of sparse codepoints;
+//                     allow PackFontRanges to pack and render in separate phases;
+//                     fix stbtt_GetFontOFfsetForIndex (never worked for non-0 input?);
+//                     fixed an assert() bug in the new rasterizer
+//                     replace assert() with STBTT_assert() in new rasterizer
+//   1.06 (2015-07-14) performance improvements (~35% faster on x86 and x64 on test machine)
+//                     also more precise AA rasterizer, except if shapes overlap
+//                     remove need for STBTT_sort
+//   1.05 (2015-04-15) fix misplaced definitions for STBTT_STATIC
+//   1.04 (2015-04-15) typo in example
+//   1.03 (2015-04-12) STBTT_STATIC, fix memory leak in new packing, various fixes
+//   1.02 (2014-12-10) fix various warnings & compile issues w/ stb_rect_pack, C++
+//   1.01 (2014-12-08) fix subpixel position when oversampling to exactly match
+//                        non-oversampled; STBTT_POINT_SIZE for packed case only
+//   1.00 (2014-12-06) add new PackBegin etc. API, w/ support for oversampling
+//   0.99 (2014-09-18) fix multiple bugs with subpixel rendering (ryg)
+//   0.9  (2014-08-07) support certain mac/iOS fonts without an MS platformID
+//   0.8b (2014-07-07) fix a warning
+//   0.8  (2014-05-25) fix a few more warnings
+//   0.7  (2013-09-25) bugfix: subpixel glyph bug fixed in 0.5 had come back
+//   0.6c (2012-07-24) improve documentation
+//   0.6b (2012-07-20) fix a few more warnings
+//   0.6  (2012-07-17) fix warnings; added stbtt_ScaleForMappingEmToPixels,
+//                        stbtt_GetFontBoundingBox, stbtt_IsGlyphEmpty
+//   0.5  (2011-12-09) bugfixes:
+//                        subpixel glyph renderer computed wrong bounding box
+//                        first vertex of shape can be off-curve (FreeSans)
+//   0.4b (2011-12-03) fixed an error in the font baking example
+//   0.4  (2011-12-01) kerning, subpixel rendering (tor)
+//                    bugfixes for:
+//                        codepoint-to-glyph conversion using table fmt=12
+//                        codepoint-to-glyph conversion using table fmt=4
+//                        stbtt_GetBakedQuad with non-square texture (Zer)
+//                    updated Hello World! sample to use kerning and subpixel
+//                    fixed some warnings
+//   0.3  (2009-06-24) cmap fmt=12, compound shapes (MM)
+//                    userdata, malloc-from-userdata, non-zero fill (stb)
+//   0.2  (2009-03-11) Fix unsigned/signed char warnings
+//   0.1  (2009-03-09) First public release
+//
+
+/*
+------------------------------------------------------------------------------
+This software is available under 2 licenses -- choose whichever you prefer.
+------------------------------------------------------------------------------
+ALTERNATIVE A - MIT License
+Copyright (c) 2017 Sean Barrett
+Permission is hereby granted, free of charge, to any person obtaining a copy of
+this software and associated documentation files (the "Software"), to deal in
+the Software without restriction, including without limitation the rights to
+use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+of the Software, and to permit persons to whom the Software is furnished to do
+so, subject to the following conditions:
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
+------------------------------------------------------------------------------
+ALTERNATIVE B - Public Domain (www.unlicense.org)
+This is free and unencumbered software released into the public domain.
+Anyone is free to copy, modify, publish, use, compile, sell, or distribute this
+software, either in source code form or as a compiled binary, for any purpose,
+commercial or non-commercial, and by any means.
+In jurisdictions that recognize copyright laws, the author or authors of this
+software dedicate any and all copyright interest in the software to the public
+domain. We make this dedication for the benefit of the public at large and to
+the detriment of our heirs and successors. We intend this dedication to be an
+overt act of relinquishment in perpetuity of all present and future rights to
+this software under copyright law.
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+------------------------------------------------------------------------------
+*/
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 2/4] kernel-shark: Make GLUT optional dependency
  2020-11-20  9:50 [PATCH 0/4] Upgrade the OpenGL wrapper for KernelShark v2.0 Yordan Karadzhov (VMware)
  2020-11-20  9:50 ` [PATCH 1/4] kernel-shark: Add support for drawing text Yordan Karadzhov (VMware)
@ 2020-11-20  9:50 ` Yordan Karadzhov (VMware)
  2020-11-20  9:50 ` [PATCH 3/4] kernel-shark: Add ksplot_draw_polyline() Yordan Karadzhov (VMware)
  2020-11-20  9:50 ` [PATCH 4/4] kernel-shark: Optimize ksplot_draw_polygon() Yordan Karadzhov (VMware)
  3 siblings, 0 replies; 9+ messages in thread
From: Yordan Karadzhov (VMware) @ 2020-11-20  9:50 UTC (permalink / raw)
  To: rostedt; +Cc: linux-trace-devel, Yordan Karadzhov (VMware)

GLUT is not needed in order to build the KernelShark GUI. Currently
it is being used only by the plotting example, so it makes more sense
to removed it from the list of compulsory third party packages.
The patch optimizes the way the OpenGL and GLUT headers are included
and removes some duplicated code.

Signen-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
---
 build/deff.h.cmake   |  3 +++
 src/CMakeLists.txt   |  4 ++--
 src/libkshark-plot.c | 20 +++++++-------------
 src/libkshark-plot.h | 11 +++++++++++
 4 files changed, 23 insertions(+), 15 deletions(-)

diff --git a/build/deff.h.cmake b/build/deff.h.cmake
index e398c0ca..868ffeca 100644
--- a/build/deff.h.cmake
+++ b/build/deff.h.cmake
@@ -23,6 +23,9 @@
 /** "pkexec" executable. */
 #cmakedefine DO_AS_ROOT "@DO_AS_ROOT@"
 
+/** GLUT has been found. */
+#cmakedefine GLUT_FOUND
+
 /** Semicolon-separated list of plugin names. */
 #define KS_BUILTIN_PLUGINS "@PLUGINS@"
 
diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
index 3a07d824..cbd45ed7 100644
--- a/src/CMakeLists.txt
+++ b/src/CMakeLists.txt
@@ -19,7 +19,7 @@ set_target_properties(kshark  PROPERTIES SUFFIX	".so.${KS_VERSION_STRING}")
 
 install(TARGETS kshark LIBRARY DESTINATION ${_LIBDIR}/${KS_APP_NAME})
 
-if (OPENGL_FOUND AND GLUT_FOUND)
+if (OPENGL_FOUND)
 
     message(STATUS "libkshark-plot")
     add_library(kshark-plot  SHARED  libkshark-plot.c)
@@ -33,7 +33,7 @@ if (OPENGL_FOUND AND GLUT_FOUND)
 
     install(TARGETS kshark-plot LIBRARY DESTINATION ${_LIBDIR}/${KS_APP_NAME})
 
-endif (OPENGL_FOUND AND GLUT_FOUND)
+endif (OPENGL_FOUND)
 
 if (Qt5Widgets_FOUND AND Qt5Network_FOUND)
 
diff --git a/src/libkshark-plot.c b/src/libkshark-plot.c
index 06483334..f2c5be30 100644
--- a/src/libkshark-plot.c
+++ b/src/libkshark-plot.c
@@ -18,10 +18,6 @@
 #include <string.h>
 #include <stdio.h>
 
-// OpenGL
-#include <GL/freeglut.h>
-#include <GL/gl.h>
-
 // KernelShark
 #include "libkshark-plot.h"
 
@@ -36,6 +32,10 @@
 #define STBTT_STATIC
 #include "stb_truetype.h"
 
+#ifdef GLUT_FOUND
+
+#include <GL/freeglut.h>
+
 /**
  * @brief Create an empty scene for drawing.
  *
@@ -60,17 +60,11 @@ void ksplot_make_scene(int width, int height)
 	/* Open the screen window. */
 	glutCreateWindow("KernelShark Plot");
 
-	/*
-	 * Set the origin of the coordinate system to be the top left corner.
-	 * The "Y" coordinate is inverted.
-	 */
-	gluOrtho2D(0, width, height, 0);
-	glViewport(0, 0, width, height);
-
-	glMatrixMode(GL_PROJECTION);
-	glLoadIdentity();
+	ksplot_resize_opengl(width, height);
 }
 
+#endif // GLUT_FOUND
+
 /**
  * @brief Initialize OpenGL.
  *
diff --git a/src/libkshark-plot.h b/src/libkshark-plot.h
index 0edf5d50..063740d9 100644
--- a/src/libkshark-plot.h
+++ b/src/libkshark-plot.h
@@ -15,6 +15,10 @@
 // C
 #include <stdbool.h>
 
+// OpenGL
+#include <GL/gl.h>
+#include <GL/glu.h>
+
 /*
  * STB TrueType (single-file public domain library)
  * https://github.com/nothings/stb
@@ -25,6 +29,9 @@
 extern "C" {
 #endif
 
+// KernelShark
+#include "KsCmakeDef.hpp"
+
 /** Structure defining a RGB color. */
 struct ksplot_color {
 	/** The Red component of the color. */
@@ -46,8 +53,12 @@ struct ksplot_point {
 	int y;
 };
 
+#ifdef GLUT_FOUND
+
 void ksplot_make_scene(int width, int height);
 
+#endif // GLUT_FOUND
+
 void ksplot_init_opengl(int dpr);
 
 void ksplot_resize_opengl(int width, int height);
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 3/4] kernel-shark: Add ksplot_draw_polyline()
  2020-11-20  9:50 [PATCH 0/4] Upgrade the OpenGL wrapper for KernelShark v2.0 Yordan Karadzhov (VMware)
  2020-11-20  9:50 ` [PATCH 1/4] kernel-shark: Add support for drawing text Yordan Karadzhov (VMware)
  2020-11-20  9:50 ` [PATCH 2/4] kernel-shark: Make GLUT optional dependency Yordan Karadzhov (VMware)
@ 2020-11-20  9:50 ` Yordan Karadzhov (VMware)
  2020-11-20  9:50 ` [PATCH 4/4] kernel-shark: Optimize ksplot_draw_polygon() Yordan Karadzhov (VMware)
  3 siblings, 0 replies; 9+ messages in thread
From: Yordan Karadzhov (VMware) @ 2020-11-20  9:50 UTC (permalink / raw)
  To: rostedt; +Cc: linux-trace-devel, Yordan Karadzhov (VMware)

The method draws continuous line between an ordered array of
points (poly-line).

Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
---
 src/libkshark-plot.c | 32 ++++++++++++++++++++++++++------
 src/libkshark-plot.h |  5 +++++
 2 files changed, 31 insertions(+), 6 deletions(-)

diff --git a/src/libkshark-plot.c b/src/libkshark-plot.c
index f2c5be30..dc49fbd9 100644
--- a/src/libkshark-plot.c
+++ b/src/libkshark-plot.c
@@ -150,6 +150,30 @@ void ksplot_draw_line(const struct ksplot_point *a,
 	glEnd();
 }
 
+/**
+ * @brief Draw the a polyline.
+ *
+ * @param points: Input location for the array of points defining the polyline.
+ * @param n_points: The size of the array of points.
+ * @param col: The color of the polyline.
+ * @param size: The size of the polyline.
+ */
+void ksplot_draw_polyline(const struct ksplot_point *points,
+			  size_t n_points,
+			  const struct ksplot_color *col,
+			  float size)
+{
+	if (!points || !n_points || !col || size < .5f)
+		return;
+
+	/* Loop over the points of the polygon and draw connecting lines. */
+	for(size_t i = 1; i < n_points; ++i)
+		ksplot_draw_line(&points[i - 1],
+				 &points[i],
+				 col,
+				 size);
+}
+
 /**
  * @brief Draw a polygon.
  *
@@ -211,12 +235,8 @@ void ksplot_draw_polygon_contour(const struct ksplot_point *points,
 	if (!points || !n_points || !col || size < .5f)
 		return;
 
-	/* Loop over the points of the polygon and draw connecting lines. */
-	for(size_t i = 1; i < n_points; ++i)
-		ksplot_draw_line(&points[i - 1],
-				 &points[i],
-				 col,
-				 size);
+	/* Loop over the points of the polygon and draw a polyline. */
+	ksplot_draw_polyline(points, n_points, col, size);
 
 	/* Close the contour. */
 	ksplot_draw_line(&points[0],
diff --git a/src/libkshark-plot.h b/src/libkshark-plot.h
index 063740d9..d881b20a 100644
--- a/src/libkshark-plot.h
+++ b/src/libkshark-plot.h
@@ -72,6 +72,11 @@ void ksplot_draw_line(const struct ksplot_point *a,
 		      const struct ksplot_color *col,
 		      float size);
 
+void ksplot_draw_polyline(const struct ksplot_point *points,
+			  size_t n_points,
+			  const struct ksplot_color *col,
+			  float size);
+
 void ksplot_draw_polygon(const struct ksplot_point *points,
 			 size_t n_points,
 			 const struct ksplot_color *col,
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 4/4] kernel-shark: Optimize ksplot_draw_polygon()
  2020-11-20  9:50 [PATCH 0/4] Upgrade the OpenGL wrapper for KernelShark v2.0 Yordan Karadzhov (VMware)
                   ` (2 preceding siblings ...)
  2020-11-20  9:50 ` [PATCH 3/4] kernel-shark: Add ksplot_draw_polyline() Yordan Karadzhov (VMware)
@ 2020-11-20  9:50 ` Yordan Karadzhov (VMware)
  3 siblings, 0 replies; 9+ messages in thread
From: Yordan Karadzhov (VMware) @ 2020-11-20  9:50 UTC (permalink / raw)
  To: rostedt; +Cc: linux-trace-devel, Yordan Karadzhov (VMware), Slavomir Kaslev

Using a point inside the polygon to start the Triangle Fan looked
more intuitive to me when I first implemented this method. I guess
this was because when you use an internal point to start, the
resulting set of triangles looks like fan indeed. However, as
pointed out by Slavomir Kaslev, the Triangle Fan can be started
from any corner of the polygon.

Suggested-by: Slavomir Kaslev <kaslevs@vmware.com>
Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
---
 src/libkshark-plot.c | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/src/libkshark-plot.c b/src/libkshark-plot.c
index dc49fbd9..7eea811c 100644
--- a/src/libkshark-plot.c
+++ b/src/libkshark-plot.c
@@ -200,18 +200,9 @@ void ksplot_draw_polygon(const struct ksplot_point *points,
 		return;
 	}
 
-	/* Obtain a point inside the surface of the polygon. */
-	struct ksplot_point in_point;
-	in_point.x = (points[0].x + points[2].x) / 2;
-	in_point.y = (points[0].y + points[2].y) / 2;
-
-	/*
-	 * Draw a Triangle Fan using the internal point as a central
-	 * vertex.
-	 */
+	/* Draw a Triangle Fan. */
 	glBegin(GL_TRIANGLE_FAN);
 	glColor3ub(col->red, col->green, col->blue);
-	glVertex2i(in_point.x, in_point.y);
 	for (size_t i = 0; i < n_points; ++i)
 		glVertex2i(points[i].x, points[i].y);
 
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/4] kernel-shark: Add support for drawing text
  2020-11-20  9:50 ` [PATCH 1/4] kernel-shark: Add support for drawing text Yordan Karadzhov (VMware)
@ 2020-12-04 23:31   ` Steven Rostedt
  2020-12-09 13:30     ` Yordan Karadzhov (VMware)
  0 siblings, 1 reply; 9+ messages in thread
From: Steven Rostedt @ 2020-12-04 23:31 UTC (permalink / raw)
  To: Yordan Karadzhov (VMware); +Cc: linux-trace-devel

On Fri, 20 Nov 2020 11:50:28 +0200
"Yordan Karadzhov (VMware)" <y.karadz@gmail.com> wrote:

> OpenGL doesn't provide support for text rendering. Here we first
> re-enable the compilation of the OpenGL wrapper and add the capability
> of printing text to the OpenGL scene by using the single-file public
> domain library "stb_truetype":
> https://github.com/nothings/stb/blob/master/stb_truetype.h
> 
> Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
> ---
>  CMakeLists.txt                   |    6 +-
>  Documentation/doxygen/dox_config |    1 +
>  src/CMakeLists.txt               |    4 +-
>  src/libkshark-plot.c             |  244 +-
>  src/libkshark-plot.h             |   57 +
>  src/stb_truetype.h               | 5011 ++++++++++++++++++++++++++++++
>  6 files changed, 5312 insertions(+), 11 deletions(-)
>  create mode 100644 src/stb_truetype.h
> 
> diff --git a/CMakeLists.txt b/CMakeLists.txt
> index ccca95c1..3d179778 100644
> --- a/CMakeLists.txt
> +++ b/CMakeLists.txt
> @@ -26,9 +26,9 @@ include(${KS_DIR}/build/FindJSONC.cmake)
>  
>  find_package(Doxygen)
>  
> -# set(OpenGL_GL_PREFERENCE LEGACY)
> -# find_package(OpenGL)
> -# find_package(GLUT)
> +set(OpenGL_GL_PREFERENCE LEGACY)
> +find_package(OpenGL)
> +find_package(GLUT)
>  
>  # find_package(Qt5Widgets 5.7.1)
>  # find_package(Qt5Network)
> diff --git a/Documentation/doxygen/dox_config b/Documentation/doxygen/dox_config
> index 89b92842..0bbeb3f0 100644
> --- a/Documentation/doxygen/dox_config
> +++ b/Documentation/doxygen/dox_config
> @@ -14,3 +14,4 @@ SORT_MEMBER_DOCS       = NO
>  STRICT_PROTO_MATCHING  = YES
>  DOT_MULTI_TARGETS      = YES
>  PROJECT_LOGO           = ../../icons/KS_logo_stacked.svg
> +EXCLUDE                = ../../src/stb_truetype.h
> diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
> index ae5de54d..3a07d824 100644
> --- a/src/CMakeLists.txt
> +++ b/src/CMakeLists.txt
> @@ -22,8 +22,8 @@ install(TARGETS kshark LIBRARY DESTINATION ${_LIBDIR}/${KS_APP_NAME})
>  if (OPENGL_FOUND AND GLUT_FOUND)
>  
>      message(STATUS "libkshark-plot")
> -    add_library(kshark-plot  SHARED  libkshark-plot.c
> -                                     KsPlotTools.cpp)
> +    add_library(kshark-plot  SHARED  libkshark-plot.c)
> +#                                      KsPlotTools.cpp)
>  
>      target_link_libraries(kshark-plot  kshark
>                                         ${GLUT_LIBRARY}
> diff --git a/src/libkshark-plot.c b/src/libkshark-plot.c
> index 17d3b903..06483334 100644
> --- a/src/libkshark-plot.c
> +++ b/src/libkshark-plot.c
> @@ -1,13 +1,22 @@
>  /* SPDX-License-Identifier: LGPL-2.1 */
>  
>  /*
> - * Copyright (C) 2018 VMware Inc, Yordan Karadzhov <y.karadz@gmail.com>
> + * Copyright (C) 2018 VMware Inc, Yordan Karadzhov (VMware) <y.karadz@gmail.com>
>   */
>  
> - /**
> -  *  @file    libkshark-plot.c
> -  *  @brief   Basic tools for OpenGL plotting.
> -  */
> +/**
> + *  @file    libkshark-plot.c
> + *  @brief   Basic tools for OpenGL plotting.
> + */
> +
> +// C
> +#ifndef _GNU_SOURCE
> +/** Use GNU C Library. */
> +#define _GNU_SOURCE
> +#endif // _GNU_SOURCE
> +
> +#include <string.h>
> +#include <stdio.h>
>  
>  // OpenGL
>  #include <GL/freeglut.h>
> @@ -16,6 +25,17 @@
>  // KernelShark
>  #include "libkshark-plot.h"
>  
> +/*
> + * STB TrueType (single-file public domain library)
> + * https://github.com/nothings/stb
> + */
> +/** Generate implementation. */
> +#define STB_TRUETYPE_IMPLEMENTATION
> +
> +/** Make the implementation private. */
> +#define STBTT_STATIC
> +#include "stb_truetype.h"
> +
>  /**
>   * @brief Create an empty scene for drawing.
>   *
> @@ -66,7 +86,7 @@ void ksplot_init_opengl(int dpr)
>  	glEnable(GL_POLYGON_SMOOTH);
>  	glLineWidth(1.5 * dpr);
>  	glPointSize(2.5 * dpr);
> -	glClearColor(1, 1, 1, 1);
> +	glClearColor(1, 1, 1, 1); // White
>  }
>  
>  /**
> @@ -210,3 +230,215 @@ void ksplot_draw_polygon_contour(const struct ksplot_point *points,
>  			 col,
>  			 size);
>  }
> +
> +/**
> + * @brief Find a TrueType font file.
> + *
> + * @param font_family: The family name of the font.
> + * @param font_name: The name of the font file without the extention.
> + *
> + * @returns A string containing the absolute path to the TrueType font file
> + *	    on success, or NULL on failure. The user is responsible for freeing
> + *	    the string.
> + */
> +char *ksplot_find_font_file(const char *font_family, const char *font_name)
> +{
> +	char buffer[1024], *end;
> +	char *cmd = NULL;
> +	int ret;
> +	FILE *f;
> +
> +	ret = asprintf(&cmd, "fc-list \'%s\' |grep %s.ttf", font_family,
> +							    font_name);

This is sorta a hack, but for now we can keep it and improve it later, as
it is wrapped in this function.

Perhaps add a comment /* FIXME: Do this a bit more properly */


> +	if (ret <= 0)
> +		goto fail;
> +
> +	f = popen(cmd, "r");
> +	free(cmd);
> +	if (f == NULL)
> +		goto fail;
> +
> +	end = fgets(buffer, sizeof(buffer), f);
> +	pclose(f);
> +	if (!end)
> +		goto fail;
> +
> +	end = strchr(buffer, ':');
> +	if (!end)
> +		goto fail;
> +
> +	return strndup(buffer, end - buffer);
> +
> + fail:
> +	fprintf(stderr, "Failed to find font file.\n" );
> +	return NULL;
> +}
> +
> +/** The size of the bitmap matrix used to load the font. */
> +#define KS_FONT_BITMAP_SIZE 1024
> +
> +/**
> + * @brief Initialize a font.
> + *
> + * @param font: Output location for the font descriptor.
> + * @param size: The size of the font.
> + * @param file: Input location for the truetype font file.
> + */
> +bool ksplot_init_font(struct ksplot_font *font, float size, const char *file)
> +{
> +	unsigned char bitmap[KS_FONT_BITMAP_SIZE * KS_FONT_BITMAP_SIZE];
> +	int ascent, descent, line_gap, lsb;
> +	ssize_t buff_size, ret;
> +	unsigned char *buffer;
> +	stbtt_fontinfo info;
> +	FILE *font_file;
> +	float scale;
> +
> +	font_file = fopen(file, "rb");
> +	if (!font_file) {
> +		fprintf(stderr, "Failed to open font file!\n");
> +		return false;
> +	}
> +
> +	/* Get the size of the file. */
> +	fseek(font_file, 0, SEEK_END);
> +	buff_size = ftell(font_file);

I would use stat(2) to find the file size.

> +	fseek(font_file, 0, SEEK_SET);
> +
> +	buffer = malloc(buff_size);
> +	if (!buffer) {
> +		fprintf(stderr, "Failed to allocat memory for font!\n");
> +		goto close_file;
> +	}
> +
> +	ret = fread(buffer, buff_size, 1, font_file);
> +	fclose(font_file);
> +
> +	if (ret == 0) {
> +		fprintf(stderr, "Failed to read from font file!\n");
> +		goto free_buffer;
> +	}
> +
> +	if (!stbtt_InitFont(&info, buffer, 0)) {
> +		fprintf(stderr, "Failed to init font!\n");
> +		goto free_buffer;
> +	}
> +
> +	/* Get the font's metrics. */
> +	scale = stbtt_ScaleForMappingEmToPixels(&info, size);
> +	stbtt_GetFontVMetrics(&info, &ascent, &descent, &line_gap);
> +	if (line_gap == 0)
> +		line_gap = - descent;
> +	/*
> +	 * Calculate the dimensions of the font. Note that the descent has
> +	 * a negative value.
> +	 */
> +	font->height = (- descent + ascent + line_gap) * scale;
> +	font->base = (- descent + line_gap / 2) * scale;
> +	font->size = size;
> +
> +	/*
> +	 * The width of the 'z' character will be considered as an average
> +	 * character width.
> +	 */
> +	stbtt_GetCodepointHMetrics(&info, 'z', &font->char_width, &lsb);
> +	font->char_width *= scale;
> +
> +	ret = stbtt_BakeFontBitmap(buffer,
> +				   0,
> +				   size,
> +				   bitmap,
> +				   KS_FONT_BITMAP_SIZE,
> +				   KS_FONT_BITMAP_SIZE,
> +				   KS_SPACE_CHAR,
> +				   KS_N_CHAR,
> +				   font->cdata);
> +
> +	if (ret <= 0) {
> +		fprintf(stderr, "Failed to bake font bitmap!\n");
> +		goto free_buffer;
> +	}
> +
> +	free(buffer);
> +
> +	glGenTextures(1, &font->texture_id);
> +	glBindTexture(GL_TEXTURE_2D, font->texture_id);
> +
> +	glTexImage2D(GL_TEXTURE_2D,
> +		     0,
> +		     GL_ALPHA,
> +		     KS_FONT_BITMAP_SIZE,
> +		     KS_FONT_BITMAP_SIZE,
> +		     0,
> +		     GL_ALPHA,
> +		     GL_UNSIGNED_BYTE,
> +		     bitmap);
> +
> +	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
> +	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
> +	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
> +	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
> +

I don't really understand any of the above, so I'm assuming you know what
it is doing ;-)

> +	return true;
> +
> + close_file:
> +	fclose(font_file);
> +
> + free_buffer:
> +	free(buffer);
> +	return false;
> +}
> +
> +/**
> + * @brief Print(draw) a text.
> + *
> + * @param font: Intput location for the font descriptor.
> + * @param col: The color of the polygon.
> + * @param x: Horizontal coordinate of the beginning of the text.
> + * @param y: Verticalal coordinate of the beginning of the text.
> + * @param text: The text to be drawn.
> + */
> +void ksplot_print_text(const struct ksplot_font *font,
> +		       const struct ksplot_color *col,
> +		       float x, float y,
> +		       const char *text)
> +{
> +	glEnable(GL_TEXTURE_2D);
> +
> +	/* Set the color of the text. */
> +	if (col)
> +		glColor3ub(col->red, col->green, col->blue);
> +	else
> +		glColor3ub(0, 0, 0); // Black
> +
> +	glBindTexture(GL_TEXTURE_2D, font->texture_id);
> +	glBegin(GL_QUADS);
> +	for (; *text; ++text) {
> +		if (*text < KS_SPACE_CHAR && *text > KS_TILDA_CHAR)
> +			continue;
> +
> +		stbtt_aligned_quad quad;
> +		stbtt_GetBakedQuad(font->cdata,
> +				   KS_FONT_BITMAP_SIZE,
> +				   KS_FONT_BITMAP_SIZE,
> +				   *text - KS_SPACE_CHAR,
> +				   &x, &y,
> +				   &quad,
> +				   1);
> +
> +		glTexCoord2f(quad.s0, quad.t1);
> +		glVertex2f(quad.x0, quad.y1);
> +
> +		glTexCoord2f(quad.s1, quad.t1);
> +		glVertex2f(quad.x1, quad.y1);
> +
> +		glTexCoord2f(quad.s1, quad.t0);
> +		glVertex2f(quad.x1, quad.y0);
> +
> +		glTexCoord2f(quad.s0, quad.t0);
> +		glVertex2f(quad.x0, quad.y0);

How is the x and y moved to the next location?

> +	}
> +
> +	glEnd();
> +	glDisable(GL_TEXTURE_2D);
> +}
> diff --git a/src/libkshark-plot.h b/src/libkshark-plot.h
> index 9a4dbc02..0edf5d50 100644
> --- a/src/libkshark-plot.h
> +++ b/src/libkshark-plot.h
> @@ -12,6 +12,15 @@
>  #ifndef _LIB_KSHARK_PLOT_H
>  #define _LIB_KSHARK_PLOT_H
>  
> +// C
> +#include <stdbool.h>
> +
> +/*
> + * STB TrueType (single-file public domain library)
> + * https://github.com/nothings/stb
> + */
> +#include "stb_truetype.h"
> +
>  #ifdef __cplusplus
>  extern "C" {
>  #endif
> @@ -62,6 +71,54 @@ void ksplot_draw_polygon_contour(const struct ksplot_point *points,
>  				 const struct ksplot_color *col,
>  				 float size);
>  
> +/** The index of the "Space" character. */
> +#define KS_SPACE_CHAR 32
> +
> +/** The index of the "Tilda" character. */
> +#define KS_TILDA_CHAR 126
> +
> +/** Total number of characters supported for drawing. */
> +#define KS_N_CHAR (KS_TILDA_CHAR - KS_SPACE_CHAR + 1)
> +
> +/** Structure defining a font. */
> +struct ksplot_font {
> +	/** Identifier of the font's texture. */
> +	GLuint texture_id;
> +
> +	/** Font's texture baking data. */
> +	stbtt_bakedchar cdata[KS_N_CHAR];
> +
> +	/** The height of a text line. */
> +	int height;
> +
> +	/** The vertical position of the font's baseline. */
> +	int base;
> +
> +	/** The size of the font. */
> +	int size;
> +
> +	/**
> +	 * The width of the 'z' character. To be use as an average character
> +	 * width.
> +	 */
> +	int char_width;
> +};
> +
> +/** Check if the texture of the font is loaded. */
> +static inline bool ksplot_font_is_loaded(struct ksplot_font *f)
> +{
> +	return f->texture_id > 1;
> +}
> +
> +char *ksplot_find_font_file(const char *font_family, const char *font_name);
> +
> +bool ksplot_init_font(struct ksplot_font *font, float size, const char *file);
> +
> +void ksplot_print_text(const struct ksplot_font *font,
> +		       const struct ksplot_color *col,
> +		       float x, float y,
> +		       const char *text);
> +
>  #ifdef __cplusplus
>  }
>  #endif
> diff --git a/src/stb_truetype.h b/src/stb_truetype.h
> new file mode 100644
> index 00000000..62595a15
> --- /dev/null
> +++ b/src/stb_truetype.h

I'm assuming the rest is what you took from public domain?

> @@ -0,0 +1,5011 @@
> +// stb_truetype.h - v1.24 - public domain
> +// authored from 2009-2020 by Sean Barrett / RAD Game Tools
> +//
> +// =======================================================================
> +//
> +//    NO SECURITY GUARANTEE -- DO NOT USE THIS ON UNTRUSTED FONT FILES
> +//
> +// This library does no range checking of the offsets found in the file,
> +// meaning an attacker can use it to read arbitrary memory.
> +//
> +// =======================================================================
> +//
> +//   This library processes TrueType files:
> +//        parse files
> +//        extract glyph metrics
> +//        extract glyph shapes
> +//        render glyphs to one-channel bitmaps with antialiasing (box filter)
> +//        render glyphs to one-channel SDF bitmaps (signed-distance field/function)
> +//
> +//   Todo:
> +//        non-MS cmaps
> +//        crashproof on bad data
> +//        hinting? (no longer patented)
> +//        cleartype-style AA?
> +//        optimize: use simple memory allocator for intermediates
> +//        optimize: build edge-list directly from curves
> +//        optimize: rasterize directly from curves?
> +//
> +// ADDITIONAL CONTRIBUTORS
> +//
> +//   Mikko Mononen: compound shape support, more cmap formats
> +//   Tor Andersson: kerning, subpixel rendering
> +//   Dougall Johnson: OpenType / Type 2 font handling
> +//   Daniel Ribeiro Maciel: basic GPOS-based kerning

[..]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/4] kernel-shark: Add support for drawing text
  2020-12-04 23:31   ` Steven Rostedt
@ 2020-12-09 13:30     ` Yordan Karadzhov (VMware)
  2020-12-09 14:14       ` Yordan Karadzhov (VMware)
  2020-12-09 16:34       ` Steven Rostedt
  0 siblings, 2 replies; 9+ messages in thread
From: Yordan Karadzhov (VMware) @ 2020-12-09 13:30 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: linux-trace-devel



On 5.12.20 г. 1:31 ч., Steven Rostedt wrote:
> On Fri, 20 Nov 2020 11:50:28 +0200
> "Yordan Karadzhov (VMware)" <y.karadz@gmail.com> wrote:
> 
>> OpenGL doesn't provide support for text rendering. Here we first
>> re-enable the compilation of the OpenGL wrapper and add the capability
>> of printing text to the OpenGL scene by using the single-file public
>> domain library "stb_truetype":
>> https://github.com/nothings/stb/blob/master/stb_truetype.h
>>
>> Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
>> ---
>>   CMakeLists.txt                   |    6 +-
>>   Documentation/doxygen/dox_config |    1 +
>>   src/CMakeLists.txt               |    4 +-
>>   src/libkshark-plot.c             |  244 +-
>>   src/libkshark-plot.h             |   57 +
>>   src/stb_truetype.h               | 5011 ++++++++++++++++++++++++++++++
>>   6 files changed, 5312 insertions(+), 11 deletions(-)
>>   create mode 100644 src/stb_truetype.h
>>
>> diff --git a/CMakeLists.txt b/CMakeLists.txt
>> index ccca95c1..3d179778 100644
>> --- a/CMakeLists.txt
>> +++ b/CMakeLists.txt
>> @@ -26,9 +26,9 @@ include(${KS_DIR}/build/FindJSONC.cmake)
>>   
>>   find_package(Doxygen)
>>   
>> -# set(OpenGL_GL_PREFERENCE LEGACY)
>> -# find_package(OpenGL)
>> -# find_package(GLUT)
>> +set(OpenGL_GL_PREFERENCE LEGACY)
>> +find_package(OpenGL)
>> +find_package(GLUT)
>>   
>>   # find_package(Qt5Widgets 5.7.1)
>>   # find_package(Qt5Network)
>> diff --git a/Documentation/doxygen/dox_config b/Documentation/doxygen/dox_config
>> index 89b92842..0bbeb3f0 100644
>> --- a/Documentation/doxygen/dox_config
>> +++ b/Documentation/doxygen/dox_config
>> @@ -14,3 +14,4 @@ SORT_MEMBER_DOCS       = NO
>>   STRICT_PROTO_MATCHING  = YES
>>   DOT_MULTI_TARGETS      = YES
>>   PROJECT_LOGO           = ../../icons/KS_logo_stacked.svg
>> +EXCLUDE                = ../../src/stb_truetype.h
>> diff --git a/src/CMakeLists.txt b/src/CMakeLists.txt
>> index ae5de54d..3a07d824 100644
>> --- a/src/CMakeLists.txt
>> +++ b/src/CMakeLists.txt
>> @@ -22,8 +22,8 @@ install(TARGETS kshark LIBRARY DESTINATION ${_LIBDIR}/${KS_APP_NAME})
>>   if (OPENGL_FOUND AND GLUT_FOUND)
>>   
>>       message(STATUS "libkshark-plot")
>> -    add_library(kshark-plot  SHARED  libkshark-plot.c
>> -                                     KsPlotTools.cpp)
>> +    add_library(kshark-plot  SHARED  libkshark-plot.c)
>> +#                                      KsPlotTools.cpp)
>>   
>>       target_link_libraries(kshark-plot  kshark
>>                                          ${GLUT_LIBRARY}
>> diff --git a/src/libkshark-plot.c b/src/libkshark-plot.c
>> index 17d3b903..06483334 100644
>> --- a/src/libkshark-plot.c
>> +++ b/src/libkshark-plot.c
>> @@ -1,13 +1,22 @@
>>   /* SPDX-License-Identifier: LGPL-2.1 */
>>   
>>   /*
>> - * Copyright (C) 2018 VMware Inc, Yordan Karadzhov <y.karadz@gmail.com>
>> + * Copyright (C) 2018 VMware Inc, Yordan Karadzhov (VMware) <y.karadz@gmail.com>
>>    */
>>   
>> - /**
>> -  *  @file    libkshark-plot.c
>> -  *  @brief   Basic tools for OpenGL plotting.
>> -  */
>> +/**
>> + *  @file    libkshark-plot.c
>> + *  @brief   Basic tools for OpenGL plotting.
>> + */
>> +
>> +// C
>> +#ifndef _GNU_SOURCE
>> +/** Use GNU C Library. */
>> +#define _GNU_SOURCE
>> +#endif // _GNU_SOURCE
>> +
>> +#include <string.h>
>> +#include <stdio.h>
>>   
>>   // OpenGL
>>   #include <GL/freeglut.h>
>> @@ -16,6 +25,17 @@
>>   // KernelShark
>>   #include "libkshark-plot.h"
>>   
>> +/*
>> + * STB TrueType (single-file public domain library)
>> + * https://github.com/nothings/stb
>> + */
>> +/** Generate implementation. */
>> +#define STB_TRUETYPE_IMPLEMENTATION
>> +
>> +/** Make the implementation private. */
>> +#define STBTT_STATIC
>> +#include "stb_truetype.h"
>> +
>>   /**
>>    * @brief Create an empty scene for drawing.
>>    *
>> @@ -66,7 +86,7 @@ void ksplot_init_opengl(int dpr)
>>   	glEnable(GL_POLYGON_SMOOTH);
>>   	glLineWidth(1.5 * dpr);
>>   	glPointSize(2.5 * dpr);
>> -	glClearColor(1, 1, 1, 1);
>> +	glClearColor(1, 1, 1, 1); // White
>>   }
>>   
>>   /**
>> @@ -210,3 +230,215 @@ void ksplot_draw_polygon_contour(const struct ksplot_point *points,
>>   			 col,
>>   			 size);
>>   }
>> +
>> +/**
>> + * @brief Find a TrueType font file.
>> + *
>> + * @param font_family: The family name of the font.
>> + * @param font_name: The name of the font file without the extention.
>> + *
>> + * @returns A string containing the absolute path to the TrueType font file
>> + *	    on success, or NULL on failure. The user is responsible for freeing
>> + *	    the string.
>> + */
>> +char *ksplot_find_font_file(const char *font_family, const char *font_name)
>> +{
>> +	char buffer[1024], *end;
>> +	char *cmd = NULL;
>> +	int ret;
>> +	FILE *f;
>> +
>> +	ret = asprintf(&cmd, "fc-list \'%s\' |grep %s.ttf", font_family,
>> +							    font_name);
> 
> This is sorta a hack, but for now we can keep it and improve it later, as
> it is wrapped in this function.
> 
> Perhaps add a comment /* FIXME: Do this a bit more properly */

OK, I will add the comment.

> 
> 
>> +	if (ret <= 0)
>> +		goto fail;
>> +
>> +	f = popen(cmd, "r");
>> +	free(cmd);
>> +	if (f == NULL)
>> +		goto fail;
>> +
>> +	end = fgets(buffer, sizeof(buffer), f);
>> +	pclose(f);
>> +	if (!end)
>> +		goto fail;
>> +
>> +	end = strchr(buffer, ':');
>> +	if (!end)
>> +		goto fail;
>> +
>> +	return strndup(buffer, end - buffer);
>> +
>> + fail:
>> +	fprintf(stderr, "Failed to find font file.\n" );
>> +	return NULL;
>> +}
>> +
>> +/** The size of the bitmap matrix used to load the font. */
>> +#define KS_FONT_BITMAP_SIZE 1024
>> +
>> +/**
>> + * @brief Initialize a font.
>> + *
>> + * @param font: Output location for the font descriptor.
>> + * @param size: The size of the font.
>> + * @param file: Input location for the truetype font file.
>> + */
>> +bool ksplot_init_font(struct ksplot_font *font, float size, const char *file)
>> +{
>> +	unsigned char bitmap[KS_FONT_BITMAP_SIZE * KS_FONT_BITMAP_SIZE];
>> +	int ascent, descent, line_gap, lsb;
>> +	ssize_t buff_size, ret;
>> +	unsigned char *buffer;
>> +	stbtt_fontinfo info;
>> +	FILE *font_file;
>> +	float scale;
>> +
>> +	font_file = fopen(file, "rb");
>> +	if (!font_file) {
>> +		fprintf(stderr, "Failed to open font file!\n");
>> +		return false;
>> +	}
>> +
>> +	/* Get the size of the file. */
>> +	fseek(font_file, 0, SEEK_END);
>> +	buff_size = ftell(font_file);
> 
> I would use stat(2) to find the file size.

I will fix this, thanks!

> 
>> +	fseek(font_file, 0, SEEK_SET);
>> +
>> +	buffer = malloc(buff_size);
>> +	if (!buffer) {
>> +		fprintf(stderr, "Failed to allocat memory for font!\n");
>> +		goto close_file;
>> +	}
>> +
>> +	ret = fread(buffer, buff_size, 1, font_file);
>> +	fclose(font_file);
>> +
>> +	if (ret == 0) {
>> +		fprintf(stderr, "Failed to read from font file!\n");
>> +		goto free_buffer;
>> +	}
>> +
>> +	if (!stbtt_InitFont(&info, buffer, 0)) {
>> +		fprintf(stderr, "Failed to init font!\n");
>> +		goto free_buffer;
>> +	}
>> +
>> +	/* Get the font's metrics. */
>> +	scale = stbtt_ScaleForMappingEmToPixels(&info, size);
>> +	stbtt_GetFontVMetrics(&info, &ascent, &descent, &line_gap);
>> +	if (line_gap == 0)
>> +		line_gap = - descent;
>> +	/*
>> +	 * Calculate the dimensions of the font. Note that the descent has
>> +	 * a negative value.
>> +	 */
>> +	font->height = (- descent + ascent + line_gap) * scale;
>> +	font->base = (- descent + line_gap / 2) * scale;
>> +	font->size = size;
>> +
>> +	/*
>> +	 * The width of the 'z' character will be considered as an average
>> +	 * character width.
>> +	 */
>> +	stbtt_GetCodepointHMetrics(&info, 'z', &font->char_width, &lsb);
>> +	font->char_width *= scale;
>> +
>> +	ret = stbtt_BakeFontBitmap(buffer,
>> +				   0,
>> +				   size,
>> +				   bitmap,
>> +				   KS_FONT_BITMAP_SIZE,
>> +				   KS_FONT_BITMAP_SIZE,
>> +				   KS_SPACE_CHAR,
>> +				   KS_N_CHAR,
>> +				   font->cdata);
>> +
>> +	if (ret <= 0) {
>> +		fprintf(stderr, "Failed to bake font bitmap!\n");
>> +		goto free_buffer;
>> +	}
>> +
>> +	free(buffer);
>> +
>> +	glGenTextures(1, &font->texture_id);
>> +	glBindTexture(GL_TEXTURE_2D, font->texture_id);
>> +
>> +	glTexImage2D(GL_TEXTURE_2D,
>> +		     0,
>> +		     GL_ALPHA,
>> +		     KS_FONT_BITMAP_SIZE,
>> +		     KS_FONT_BITMAP_SIZE,
>> +		     0,
>> +		     GL_ALPHA,
>> +		     GL_UNSIGNED_BYTE,
>> +		     bitmap);
>> +
>> +	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
>> +	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE);
>> +	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE);
>> +	glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
>> +
> 
> I don't really understand any of the above, so I'm assuming you know what
> it is doing ;-)

;-)

> 
>> +	return true;
>> +
>> + close_file:
>> +	fclose(font_file);
>> +
>> + free_buffer:
>> +	free(buffer);
>> +	return false;
>> +}
>> +
>> +/**
>> + * @brief Print(draw) a text.
>> + *
>> + * @param font: Intput location for the font descriptor.
>> + * @param col: The color of the polygon.
>> + * @param x: Horizontal coordinate of the beginning of the text.
>> + * @param y: Verticalal coordinate of the beginning of the text.
>> + * @param text: The text to be drawn.
>> + */
>> +void ksplot_print_text(const struct ksplot_font *font,
>> +		       const struct ksplot_color *col,
>> +		       float x, float y,
>> +		       const char *text)
>> +{
>> +	glEnable(GL_TEXTURE_2D);
>> +
>> +	/* Set the color of the text. */
>> +	if (col)
>> +		glColor3ub(col->red, col->green, col->blue);
>> +	else
>> +		glColor3ub(0, 0, 0); // Black
>> +
>> +	glBindTexture(GL_TEXTURE_2D, font->texture_id);
>> +	glBegin(GL_QUADS);
>> +	for (; *text; ++text) {
>> +		if (*text < KS_SPACE_CHAR && *text > KS_TILDA_CHAR)
>> +			continue;
>> +
>> +		stbtt_aligned_quad quad;
>> +		stbtt_GetBakedQuad(font->cdata,
>> +				   KS_FONT_BITMAP_SIZE,
>> +				   KS_FONT_BITMAP_SIZE,
>> +				   *text - KS_SPACE_CHAR,
>> +				   &x, &y,
>> +				   &quad,
>> +				   1);
>> +
>> +		glTexCoord2f(quad.s0, quad.t1);
>> +		glVertex2f(quad.x0, quad.y1);
>> +
>> +		glTexCoord2f(quad.s1, quad.t1);
>> +		glVertex2f(quad.x1, quad.y1);
>> +
>> +		glTexCoord2f(quad.s1, quad.t0);
>> +		glVertex2f(quad.x1, quad.y0);
>> +
>> +		glTexCoord2f(quad.s0, quad.t0);
>> +		glVertex2f(quad.x0, quad.y0);
> 
> How is the x and y moved to the next location?

Actually the "y" does not change at all here, because for the moment we 
can't draw multi-line text. "x" gets incremented inside 
stbtt_GetBakedQuad(). The horizontal advance of the character is used to 
calculate the new position.

Thanks a lot!
Yordan

> 
>> +	}
>> +
>> +	glEnd();
>> +	glDisable(GL_TEXTURE_2D);
>> +}
>> diff --git a/src/libkshark-plot.h b/src/libkshark-plot.h
>> index 9a4dbc02..0edf5d50 100644
>> --- a/src/libkshark-plot.h
>> +++ b/src/libkshark-plot.h
>> @@ -12,6 +12,15 @@
>>   #ifndef _LIB_KSHARK_PLOT_H
>>   #define _LIB_KSHARK_PLOT_H
>>   
>> +// C
>> +#include <stdbool.h>
>> +
>> +/*
>> + * STB TrueType (single-file public domain library)
>> + * https://github.com/nothings/stb
>> + */
>> +#include "stb_truetype.h"
>> +
>>   #ifdef __cplusplus
>>   extern "C" {
>>   #endif
>> @@ -62,6 +71,54 @@ void ksplot_draw_polygon_contour(const struct ksplot_point *points,
>>   				 const struct ksplot_color *col,
>>   				 float size);
>>   
>> +/** The index of the "Space" character. */
>> +#define KS_SPACE_CHAR 32
>> +
>> +/** The index of the "Tilda" character. */
>> +#define KS_TILDA_CHAR 126
>> +
>> +/** Total number of characters supported for drawing. */
>> +#define KS_N_CHAR (KS_TILDA_CHAR - KS_SPACE_CHAR + 1)
>> +
>> +/** Structure defining a font. */
>> +struct ksplot_font {
>> +	/** Identifier of the font's texture. */
>> +	GLuint texture_id;
>> +
>> +	/** Font's texture baking data. */
>> +	stbtt_bakedchar cdata[KS_N_CHAR];
>> +
>> +	/** The height of a text line. */
>> +	int height;
>> +
>> +	/** The vertical position of the font's baseline. */
>> +	int base;
>> +
>> +	/** The size of the font. */
>> +	int size;
>> +
>> +	/**
>> +	 * The width of the 'z' character. To be use as an average character
>> +	 * width.
>> +	 */
>> +	int char_width;
>> +};
>> +
>> +/** Check if the texture of the font is loaded. */
>> +static inline bool ksplot_font_is_loaded(struct ksplot_font *f)
>> +{
>> +	return f->texture_id > 1;
>> +}
>> +
>> +char *ksplot_find_font_file(const char *font_family, const char *font_name);
>> +
>> +bool ksplot_init_font(struct ksplot_font *font, float size, const char *file);
>> +
>> +void ksplot_print_text(const struct ksplot_font *font,
>> +		       const struct ksplot_color *col,
>> +		       float x, float y,
>> +		       const char *text);
>> +
>>   #ifdef __cplusplus
>>   }
>>   #endif
>> diff --git a/src/stb_truetype.h b/src/stb_truetype.h
>> new file mode 100644
>> index 00000000..62595a15
>> --- /dev/null
>> +++ b/src/stb_truetype.h
> 
> I'm assuming the rest is what you took from public domain?
> 
>> @@ -0,0 +1,5011 @@
>> +// stb_truetype.h - v1.24 - public domain
>> +// authored from 2009-2020 by Sean Barrett / RAD Game Tools
>> +//
>> +// =======================================================================
>> +//
>> +//    NO SECURITY GUARANTEE -- DO NOT USE THIS ON UNTRUSTED FONT FILES
>> +//
>> +// This library does no range checking of the offsets found in the file,
>> +// meaning an attacker can use it to read arbitrary memory.
>> +//
>> +// =======================================================================
>> +//
>> +//   This library processes TrueType files:
>> +//        parse files
>> +//        extract glyph metrics
>> +//        extract glyph shapes
>> +//        render glyphs to one-channel bitmaps with antialiasing (box filter)
>> +//        render glyphs to one-channel SDF bitmaps (signed-distance field/function)
>> +//
>> +//   Todo:
>> +//        non-MS cmaps
>> +//        crashproof on bad data
>> +//        hinting? (no longer patented)
>> +//        cleartype-style AA?
>> +//        optimize: use simple memory allocator for intermediates
>> +//        optimize: build edge-list directly from curves
>> +//        optimize: rasterize directly from curves?
>> +//
>> +// ADDITIONAL CONTRIBUTORS
>> +//
>> +//   Mikko Mononen: compound shape support, more cmap formats
>> +//   Tor Andersson: kerning, subpixel rendering
>> +//   Dougall Johnson: OpenType / Type 2 font handling
>> +//   Daniel Ribeiro Maciel: basic GPOS-based kerning
> 
> [..]
> 

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/4] kernel-shark: Add support for drawing text
  2020-12-09 13:30     ` Yordan Karadzhov (VMware)
@ 2020-12-09 14:14       ` Yordan Karadzhov (VMware)
  2020-12-09 16:34       ` Steven Rostedt
  1 sibling, 0 replies; 9+ messages in thread
From: Yordan Karadzhov (VMware) @ 2020-12-09 14:14 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: linux-trace-devel



On 9.12.20 г. 15:30 ч., Yordan Karadzhov (VMware) wrote:
>>
>>   #ifdef __cplusplus
>>   }
>>   #endif
>> diff --git a/src/stb_truetype.h b/src/stb_truetype.h
>> new file mode 100644
>> index 00000000..62595a15
>> --- /dev/null
>> +++ b/src/stb_truetype.h
> 
> I'm assuming the rest is what you took from public domain?

Yes, the rest is the public domain source code.
Thanks!
Y.

> 
>> @@ -0,0 +1,5011 @@
>> +// stb_truetype.h - v1.24 - public domain
>> +// authored from 2009-2020 by Sean Barrett / RAD Game Tools
>> +//
>> +// 
>> =======================================================================
>> +//
>> +//    NO SECURITY GUARANTEE -- DO NOT USE THIS ON UNTRUSTED FONT FILES
>> +//
>> +// This library does no range

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/4] kernel-shark: Add support for drawing text
  2020-12-09 13:30     ` Yordan Karadzhov (VMware)
  2020-12-09 14:14       ` Yordan Karadzhov (VMware)
@ 2020-12-09 16:34       ` Steven Rostedt
  1 sibling, 0 replies; 9+ messages in thread
From: Steven Rostedt @ 2020-12-09 16:34 UTC (permalink / raw)
  To: Yordan Karadzhov (VMware); +Cc: linux-trace-devel

On Wed, 9 Dec 2020 15:30:38 +0200
"Yordan Karadzhov (VMware)" <y.karadz@gmail.com> wrote:

> >> +		stbtt_GetBakedQuad(font->cdata,
> >> +				   KS_FONT_BITMAP_SIZE,
> >> +				   KS_FONT_BITMAP_SIZE,
> >> +				   *text - KS_SPACE_CHAR,
> >> +				   &x, &y,
> >> +				   &quad,
> >> +				   1);
> >> +
> >> +		glTexCoord2f(quad.s0, quad.t1);
> >> +		glVertex2f(quad.x0, quad.y1);
> >> +
> >> +		glTexCoord2f(quad.s1, quad.t1);
> >> +		glVertex2f(quad.x1, quad.y1);
> >> +
> >> +		glTexCoord2f(quad.s1, quad.t0);
> >> +		glVertex2f(quad.x1, quad.y0);
> >> +
> >> +		glTexCoord2f(quad.s0, quad.t0);
> >> +		glVertex2f(quad.x0, quad.y0);  
> > 
> > How is the x and y moved to the next location?  
> 
> Actually the "y" does not change at all here, because for the moment we 
> can't draw multi-line text. "x" gets incremented inside 
> stbtt_GetBakedQuad(). The horizontal advance of the character is used to 
> calculate the new position.

A comment next to that should be stated.

	/* x is incremented here to a new position */
	stbtt_GetBakedQuad(....)


-- Steve

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2020-12-09 16:35 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-20  9:50 [PATCH 0/4] Upgrade the OpenGL wrapper for KernelShark v2.0 Yordan Karadzhov (VMware)
2020-11-20  9:50 ` [PATCH 1/4] kernel-shark: Add support for drawing text Yordan Karadzhov (VMware)
2020-12-04 23:31   ` Steven Rostedt
2020-12-09 13:30     ` Yordan Karadzhov (VMware)
2020-12-09 14:14       ` Yordan Karadzhov (VMware)
2020-12-09 16:34       ` Steven Rostedt
2020-11-20  9:50 ` [PATCH 2/4] kernel-shark: Make GLUT optional dependency Yordan Karadzhov (VMware)
2020-11-20  9:50 ` [PATCH 3/4] kernel-shark: Add ksplot_draw_polyline() Yordan Karadzhov (VMware)
2020-11-20  9:50 ` [PATCH 4/4] kernel-shark: Optimize ksplot_draw_polygon() Yordan Karadzhov (VMware)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).