[PATCH v7 32/32] kernel-shark: Add "github Actions" workflow

["Yordan Karadzhov (VMware)" <y.karadz@gmail.com>]

From: Yordan Karadzhov <y.karadz@gmail.com>

The workflow will install all third party libraries,
will build KernelShark and will run the tests.

Signed-off-by: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
---
 .github/workflows/main.yml | 61 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 .github/workflows/main.yml

diff --git a/.github/workflows/main.yml b/.github/workflows/main.yml
new file mode 100644
index 0000000..e818f46
--- /dev/null
+++ b/.github/workflows/main.yml
@@ -0,0 +1,61 @@
+name: KernelShark CI (CMAKE)
+
+on: [push]
+
+env:
+  # Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.)
+  BUILD_TYPE: Release
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/checkout@v2
+
+    - name: Install Dependencies
+      shell: bash
+      run: |
+        sudo apt-get install build-essential git cmake libjson-c-dev -y
+        sudo apt-get install freeglut3-dev libxmu-dev libxi-dev -y
+        sudo apt-get install qtbase5-dev libboost-all-dev -y
+        git clone https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
+        cd libtraceevent
+        make
+        sudo make install
+        cd ..
+        git clone https://git.kernel.org/pub/scm/libs/libtrace/libtracefs.git/
+        cd libtracefs
+        make
+        sudo make install
+        cd ..
+        git clone git://git.kernel.org/pub/scm/utils/trace-cmd/trace-cmd.git
+        cd trace-cmd
+        make
+        sudo make install_libs
+    - name: Create Build Environment
+      # Some projects don't allow in-source building, so create a separate build directory
+      # We'll use this as our working directory for all subsequent commands
+      run: cmake -E make_directory ${{runner.workspace}}/build
+
+    - name: Configure CMake
+      # Use a bash shell so we can use the same syntax for environment variable
+      # access regardless of the host operating system
+      shell: bash
+      working-directory: ${{runner.workspace}}/build
+      # Note the current convention is to use the -S and -B options here to specify source
+      # and build directories, but this is only available with CMake 3.13 and higher.
+      # The CMake binaries on the Github Actions machines are (as of this writing) 3.12
+      run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=$BUILD_TYPE -DCMAKE_C_FLAGS_RELEASE="-Werror"
+
+    - name: Build
+      working-directory: ${{runner.workspace}}/build
+      shell: bash
+      # Execute the build.  You can specify a specific target with "--target <NAME>"
+      run: cmake --build . --config $BUILD_TYPE
+
+    - name: Test
+      working-directory: ${{runner.workspace}}/build
+      shell: bash
+      # Execute tests defined by the CMake configuration.
+      run: ctest -C $BUILD_TYPE
-- 
2.25.1