Linux-Trace-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com>
To: rostedt@goodmis.org
Cc: linux-trace-devel@vger.kernel.org
Subject: [PATCH v4 13/23] trace-cmd: Perform all timestamp corrections in a single function
Date: Thu, 25 Mar 2021 08:40:45 +0200
Message-ID: <20210325064055.539554-14-tz.stoyanov@gmail.com> (raw)
In-Reply-To: <20210325064055.539554-1-tz.stoyanov@gmail.com>

When reading event timestamps from a trace file, there could be various
corrections depending on the metadata information from the file. Move
all logic that performs timestamp calculations in a single function.

Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
---
 lib/trace-cmd/trace-input.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/lib/trace-cmd/trace-input.c b/lib/trace-cmd/trace-input.c
index be8a7919..e1842cce 100644
--- a/lib/trace-cmd/trace-input.c
+++ b/lib/trace-cmd/trace-input.c
@@ -1276,6 +1276,17 @@ static unsigned long long timestamp_correct(unsigned long long ts,
 					 &host->ts_samples[mid+1]);
 }
 
+static unsigned long long timestamp_calc(unsigned long long ts,
+					 struct tracecmd_input *handle)
+{
+	ts = timestamp_correct(ts, handle);
+
+	if (handle->ts2secs)
+		ts *= handle->ts2secs;
+
+	return ts;
+}
+
 /*
  * Page is mapped, now read in the page header info.
  */
@@ -1297,10 +1308,8 @@ static int update_page_info(struct tracecmd_input *handle, int cpu)
 		    kbuffer_subbuffer_size(kbuf));
 		return -1;
 	}
-	handle->cpu_data[cpu].timestamp = timestamp_correct(kbuffer_timestamp(kbuf), handle);
-
-	if (handle->ts2secs)
-		handle->cpu_data[cpu].timestamp *= handle->ts2secs;
+	handle->cpu_data[cpu].timestamp = timestamp_calc(kbuffer_timestamp(kbuf),
+							 handle);
 
 	return 0;
 }
@@ -1930,10 +1939,7 @@ read_again:
 		goto read_again;
 	}
 
-	handle->cpu_data[cpu].timestamp = timestamp_correct(ts, handle);
-
-	if (handle->ts2secs)
-		handle->cpu_data[cpu].timestamp *= handle->ts2secs;
+	handle->cpu_data[cpu].timestamp = timestamp_calc(ts, handle);
 
 	index = kbuffer_curr_offset(kbuf);
 
-- 
2.30.2


  parent reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-25  6:40 [PATCH v4 00/23] TSC trace clock to nanosecond conversion Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 01/23] trace-cmd: Add initial perf interface in trace-cmd library Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 02/23] trace-cmd: Extend trace-cmd dump subcommand to display the clock Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 03/23] trace-cmd: Save only the selected clock in the trace.dat file Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 04/23] trace-cmd: Internal refactoring, move logic for local tep handler in its own function Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 05/23] trace-cmd: Add new local function to check if a trace clock is supported Tzvetomir Stoyanov (VMware)
2021-03-26 21:21   ` Steven Rostedt
2021-03-25  6:40 ` [PATCH v4 06/23] trace-cmd: Add new trace-cmd clock tsc2nsec Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 07/23] trace-cmd: Define a new option for tsc2nsec conversion Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 08/23] trace-cmd: Save information for tsc to nanoseconds conversion in trace file Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 09/23] trace-cmd: Read information for tsc to nanoseconds conversion from " Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 10/23] trace-cmd: Save tsc2nsec clock in trace.dat file Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 11/23] trace-cmd: Append new options into guest trace file at the end of the tracing session Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 12/23] trace-cmd: Remove unneeded multiply in events timestamp reading Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` Tzvetomir Stoyanov (VMware) [this message]
2021-03-25  6:40 ` [PATCH v4 14/23] trace-cmd: Convert tsc timestamps to nanosecods when reading trace data from a file Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 15/23] trace-cmd: Set order and priorities when applying timestamp corrections Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 16/23] trace-cmd: Add a new flag to disable any " Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 17/23] trace-cmd: Change "--nodate" option to affect "--date" option only Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 18/23] trace-cmd: Add new parameter "--raw-ts" to "trace-cmd report" command Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 19/23] trace-cmd: Print times in TimeShift options as unsigned in trace-cmd dump Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 20/23] trace-cmd: Use tsc clock for host-guest tracing, if available Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 21/23] trace-cmd: Get current clock for host-guest tracing session Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 22/23] trace-cmd: Save the trace clocks in TRACECLOCK option Tzvetomir Stoyanov (VMware)
2021-03-25  6:40 ` [PATCH v4 23/23] trace-cmd: Read at least 8 bytes trace-id option Tzvetomir Stoyanov (VMware)
2021-03-26 21:18   ` Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210325064055.539554-14-tz.stoyanov@gmail.com \
    --to=tz.stoyanov@gmail.com \
    --cc=linux-trace-devel@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Trace-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-trace-devel/0 linux-trace-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-trace-devel linux-trace-devel/ https://lore.kernel.org/linux-trace-devel \
		linux-trace-devel@vger.kernel.org
	public-inbox-index linux-trace-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-trace-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git