Hi Steve,
> did these details help in any ways?

Ping :-)

Any change you can reproduce the problem?
Any pointers how to debug this problem?

Thanks!
metze

> Thanks!
> 
> Am 05.05.21 um 11:50 schrieb Stefan Metzmacher:
> ...
>>>
>>> Perhaps you could try something like this:
>>>
>>>  # trace-cmd list -s |
>>>     while read e ; do
>>>       echo "testing $e";
>>>       trace-cmd record -P 7 -e $e sleep 1;
>>>     done
>>>
>>> Which will enable each system at a time, and see if we can pin point what
>>> is causing the lock up. Narrow it down to a tracing system.
>>
>> I wasn't able to reproduce it.
>>
>> With a 5.12 kernel and ubuntu 20.04 amd64 userspace I was able
>> to produce the following strace output (in the 2nd try), like this:
>>
>> # ssh root@172.31.9.166 strace -f -ttT trace-cmd record -e all -P 101 2>&1 | tee out
>>
>> 101 is the pid of a kthread while my './io-uring_cp-forever link-cp.c file' runs
>> on '172.31.9.166'. See https://github.com/metze-samba/liburing/commits/io_uring-cp-forever
>> pid 1375 is the pid of 'iou-wrk-1373'.
>>
>> Maybe it's related to writing the pid into /sys/kernel/tracing/set_event_pid
>> as it ends like this:
>>> 10:56:07.493869 stat("/sys/kernel/tracing/set_event_pid", {st_mode=S_IFREG|0644, st_size=0, ...}) = 0 <0.000222>
>>> 10:56:07.494500 openat(AT_FDCWD, "/sys/kernel/tracing/set_event_pid", O_RDONLY) = 3 <0.000134>
>>> 10:56:07.494934 read(3, "1375\n", 8192) = 5 <0.000433>
>>> 10:56:07.495708 close(3)                = 0 <0.000121>
>> ...> [pid  1443] 10:56:10.045293 openat(AT_FDCWD, "/sys/kernel/tracing/set_ftrace_pid", O_WRONLY|O_TRUNC|O_CLOEXEC <unfinished ...>
>>> [pid  1444] 10:56:10.045650 <... read resumed>"sysfs /sys sysfs rw,nosuid,nodev"..., 1024) = 1024 <0.000948>
>>> [pid  1443] 10:56:10.045821 <... openat resumed>) = 5 <0.000359>
>>> [pid  1445] 10:56:10.046000 <... fstat resumed>{st_mode=S_IFREG|0444, st_size=0, ...}) = 0 <0.000873>
>>> [pid  1443] 10:56:10.046174 write(5, "101 ", 4 <unfinished ...>
>>> [pid  1444] 10:56:10.046674 read(5,  <unfinished ...>
>>> [pid  1443] 10:56:10.047007 <... write resumed>) = 4 <0.000475>
>>> [pid  1445] 10:56:10.047188 read(5,  <unfinished ...>
>>> [pid  1443] 10:56:10.047498 write(5, " ", 1 <unfinished ...>
>>> [pid  1444] 10:56:10.048343 <... read resumed>"_cls,net_prio cgroup rw,nosuid,n"..., 1024) = 1024 <0.001312>
>>> [pid  1445] 10:56:10.048578 <... read resumed>"sysfs /sys sysfs rw,nosuid,nodev"..., 1024) = 1024 <0.001224>
>>> [pid  1444] 10:56:10.048796 read(5,  <unfinished ...>
>>> [pid  1445] 10:56:10.049195 read(5,  <unfinished ...>
>>> [pid  1444] 10:56:10.049547 <... read resumed>"ges hugetlbfs rw,relatime,pagesi"..., 1024) = 690 <0.000403>
>>> [pid  1445] 10:56:10.049722 <... read resumed>"_cls,net_prio cgroup rw,nosuid,n"..., 1024) = 1024 <0.000339>
>>> [pid  1444] 10:56:10.049924 close(5 <unfinished ...>
>>> [pid  1445] 10:56:10.050224 read(5,  <unfinished ...>
>>> [pid  1444] 10:56:10.050550 <... close resumed>) = 0 <0.000323>
>>> [pid  1445] 10:56:10.050714 <... read resumed>"ges hugetlbfs rw,relatime,pagesi"..., 1024) = 690 <0.000327>
>>> [pid  1444] 10:56:10.050883 openat(AT_FDCWD, "trace.dat.cpu0", O_WRONLY|O_CREAT|O_TRUNC, 0644 <unfinished ...>
>>> [pid  1445] 10:56:10.051299 close(5)    = 0 <0.016204>
>>> [pid  1445] 10:56:10.067841 openat(AT_FDCWD, "trace.dat.cpu1", O_WRONLY|O_CREAT|O_TRUNC, 0644 <unfinished ...>
>>> [pid  1443] 10:56:10.100729 <... write resumed>) = 0 <0.052057>
>>> [pid  1443] 10:56:10.101022 openat(AT_FDCWD, "/sys/kernel/tracing/set_event_pid", O_WRONLY|O_TRUNC|O_CLOEXEC) = 6 <0.014801>
>>> [pid  1443] 10:56:10.116299 write(6, "101 ", 4
>>
>> The full output can be found here:
>> https://www.samba.org/~metze/strace.5.12-trace-cmd-record-all-P-101-kthread-fail-01.txt
>>
>> I redid it on ubuntu 21.04 with this kernel:
>> https://kernel.ubuntu.com/git/ubuntu/ubuntu-hirsute.git/tag/?h=Ubuntu-5.11.0-16.17
>> which is based on Linux 5.11.12
>>
>> I tried it onces using of pid from a kthread and it didn't reproduce:
>>> 09:10:50.719423 openat(AT_FDCWD, "/sys/kernel/tracing/set_event_pid", O_RDONLY) = 3 <0.000084>
>>> 09:10:50.719605 read(3, "", 8192)       = 0 <0.000075>
>>> 09:10:50.719774 close(3)                = 0 <0.000080>
>> ...
>>> [pid  1135] 09:10:53.468541 fcntl(6, F_GETPIPE_SZ) = 65536 <0.000009>
>>> [pid  1135] 09:10:53.468589 splice(5, NULL, 7, NULL, 4096, SPLICE_F_MOVE <unfinished ...>
>>> [pid  1134] 09:10:53.480165 <... write resumed>) = 0 <0.014106>
>>> [pid  1134] 09:10:53.480201 close(4)    = 0 <0.000011>
>>> [pid  1134] 09:10:53.480250 openat(AT_FDCWD, "/sys/kernel/tracing/set_event_pid", O_WRONLY|O_TRUNC|O_CLOEXEC) = 4 <0.000024>
>>> [pid  1134] 09:10:53.480311 write(4, "7 ", 2) = 2 <0.000194>
>>> [pid  1134] 09:10:53.480530 close(4)    = 0 <0.000011>
>>> [pid  1134] 09:10:53.480565 openat(AT_FDCWD, "/sys/kernel/tracing/tracing_enabled", O_WRONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) <0.000013>
>>> [pid  1134] 09:10:53.480605 write(3, "1", 1) = 1 <0.000008>
>>> [pid  1134] 09:10:53.480632 newfstatat(1, "", {st_mode=S_IFIFO|0600, st_size=0, ...}, AT_EMPTY_PATH) = 0 <0.000007>
>>> [pid  1134] 09:10:53.480673 pidfd_open(7, 0) = 4 <0.000010>
>>> [pid  1134] 09:10:53.480701 poll([{fd=4, events=POLLIN}], 1, -1
>>
>> The full output can be found here:
>> https://www.samba.org/~metze/strace.5.11.12-trace-cmd-record-all-P-7-kthread-nofail-02.txt
>>
>> And using the pid of io_wqe_worker-0 it happened again,
>> also writing the pid into /sys/kernel/tracing/set_event_pid:
>> (remember 7 was the pid of the kthread):
>>> 09:13:18.000315 openat(AT_FDCWD, "/sys/kernel/tracing/set_event_pid", O_RDONLY) = 3 <0.000074>
>>> 09:13:18.000471 read(3, "7\n", 8192)    = 2 <0.000158>
>>> 09:13:18.000703 close(3)                = 0 <0.000052>
>> ...> [pid  1224] 09:13:20.671939 close(4)    = 0 <0.000084>
>>> [pid  1224] 09:13:20.672106 openat(AT_FDCWD, "trace.dat.cpu0", O_WRONLY|O_CREAT|O_TRUNC, 0644) = 4 <0.000085>
>>> [pid  1224] 09:13:20.672292 openat(AT_FDCWD, "/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw", O_RDONLY) = 5 <0.000062>
>>> [pid  1224] 09:13:20.672432 pipe([6, 7]) = 0 <0.000057>
>>> [pid  1224] 09:13:20.672595 fcntl(6, F_GETPIPE_SZ) = 65536 <0.000051>
>>> [pid  1224] 09:13:20.672728 splice(5, NULL, 7, NULL, 4096, SPLICE_F_MOVE <unfinished ...>
>>> [pid  1223] 09:13:20.688172 <... write resumed>) = 0 <0.020134>
>>> [pid  1223] 09:13:20.688215 close(4)    = 0 <0.000015>
>>> [pid  1223] 09:13:20.688276 openat(AT_FDCWD, "/sys/kernel/tracing/set_event_pid", O_WRONLY|O_TRUNC|O_CLOEXEC) = 4 <0.027854>
>>> [pid  1223] 09:13:20.716198 write(4, "1043 ", 5
>>
>> The full output can be found here:
>> https://www.samba.org/~metze/strace.5.11.12-trace-cmd-record-all-P-1043-io_wqe_worker-fail-03.txt
>>
>> I thought it happens always if there was already a value in /sys/kernel/tracing/set_event_pid...,
>> but the next time I started with pid 6 from a kthread and directly triggered it:
>>
>>> 09:41:24.029860 openat(AT_FDCWD, "/sys/kernel/tracing/set_event_pid", O_RDONLY) = 3 <0.000048>
>>> 09:41:24.029982 read(3, "", 8192)       = 0 <0.000046>
>>> 09:41:24.030101 close(3)                = 0 <0.000045>
>> ...
>>> [pid  1425] 09:41:26.212972 read(4, "sysfs /sys sysfs rw,nosuid,nodev"..., 1024) = 1024 <0.000077>
>>> [pid  1425] 09:41:26.213128 read(4, "group/rdma cgroup rw,nosuid,node"..., 1024) = 1024 <0.000075>
>>> [pid  1425] 09:41:26.213316 read(4, "ev/hugepages hugetlbfs rw,relati"..., 1024) = 1024 <0.000058>
>>> [pid  1425] 09:41:26.213459 close(4)    = 0 <0.000044>
>>> [pid  1425] 09:41:26.213584 openat(AT_FDCWD, "trace.dat.cpu0", O_WRONLY|O_CREAT|O_TRUNC, 0644) = 4 <0.000229>
>>> [pid  1425] 09:41:26.213895 openat(AT_FDCWD, "/sys/kernel/tracing/per_cpu/cpu0/trace_pipe_raw", O_RDONLY) = 5 <0.000055>
>>> [pid  1425] 09:41:26.214030 pipe([6, 7]) = 0 <0.000066>
>>> [pid  1425] 09:41:26.214188 fcntl(6, F_GETPIPE_SZ) = 65536 <0.000065>
>>> [pid  1425] 09:41:26.214332 splice(5, NULL, 7, NULL, 4096, SPLICE_F_MOVE
>>
>> It ended here, but I think the rest ( close(4); openat("/sys/kernel/tracing/set_event_pid"); write("6 ")
>> was just eaten by the delayed output of the ssh session.
>>
>> The full output can be found here:
>> https://www.samba.org/~metze/strace.5.11.12-trace-cmd-record-all-P-6-kthread-fail-04.txt
>>
>> Does these details help already?
>>
>> Thanks!
>> metze
>>
>