Linux-Trace-Users Archive on lore.kernel.org
 help / color / Atom feed
* [ANNOUNCE] KernelShark 1.0
@ 2019-07-26 13:57 Steven Rostedt
  2019-07-26 14:49 ` Bhaskar Chowdhury
  0 siblings, 1 reply; 3+ messages in thread
From: Steven Rostedt @ 2019-07-26 13:57 UTC (permalink / raw)
  To: LKML, linux-rt-users, linux-trace-users, Linux Trace Devel,
	troyengel, amikhak, valentin.schneider, Patrick McLean,
	John Kacur, Yordan Karadzhov, Tzvetomir Stoyanov,
	Slavomir Kaslev, howaboutsynergy, Bas van Dijk

Hi Folks,

It is finally official. We have finished and released KernelShark 1.0.

 http://www.kernelshark.org

It's a completely new rewrite in Qt from the older KernelShark that was
written in GTK. It's faster, it's more extensible, and easier to use.

For how to use KernelShark please read:

  http://www.kernelshark.org/Documentation.html

I would like to thank my team that worked tirelessly on this, and
especially Yordan Karadzhov who did the majority of the work, and even
came up with several algorithms to speed up the handling. I will be
transitioning maintainership off to Yordan. We will currently be
co-maintainers, but eventually we will be splitting KernelShark out of
the trace-cmd.git repo and into its own. At that time, Yordan will be
the main maintainer of the project.

Download it and try it out.

Now we can finally start working on KernelShark 2.0 that's going to be
another huge improvement!

Enjoy!

-- Steve

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-26 13:57 [ANNOUNCE] KernelShark 1.0 Steven Rostedt
2019-07-26 14:49 ` Bhaskar Chowdhury
2019-07-26 14:52   ` Steven Rostedt

Linux-Trace-Users Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-trace-users/0 linux-trace-users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-trace-users linux-trace-users/ https://lore.kernel.org/linux-trace-users \
		linux-trace-users@vger.kernel.org
	public-inbox-index linux-trace-users

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-trace-users


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git