($INBOX_DIR/description missing)
 help / color / Atom feed
* [PATCH 0/1] preparatory patch for a uid/gid shifting bind mount
@ 2019-11-30 21:19 James Bottomley
  2019-11-30 21:21 ` [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry James Bottomley
  2019-12-14 11:56 ` [PATCH 0/1] preparatory patch for a uid/gid shifting bind mount Christian Brauner
  0 siblings, 2 replies; 9+ messages in thread
From: James Bottomley @ 2019-11-30 21:19 UTC (permalink / raw)
  To: linux-fsdevel
  Cc: dhowells, Al Viro, Miklos Szeredi, linux-unionfs, Seth Forshee

I had another look at what it would take to reimplement shiftfs as a
true bind mount.  It turns out we do have struct path threaded in
almost enough places to make it work.  There really is only one API
that needs updating and that's notify_change(), so the following patch
fixes that and pulls do_truncate() along as well.  The updates are
mostly smooth and pretty obvious because the path was actually already
present, except for in overlayfs where trying to sort out what the path
should be is somewhat of a nightmare.  If the overlayfs people could
take a look and make sure I got it right, I'd be grateful.

I think this is the only needed change, but I've only just got a
functional implementation of a uid/gid shifting bind mount, so there
might be other places that need rethreading as I find deficiencies in
the current implementation.  I'll send them along as additional patches
if I find them

James

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry
  2019-11-30 21:19 [PATCH 0/1] preparatory patch for a uid/gid shifting bind mount James Bottomley
@ 2019-11-30 21:21 ` James Bottomley
  2019-12-01  7:04   ` Amir Goldstein
                     ` (2 more replies)
  2019-12-14 11:56 ` [PATCH 0/1] preparatory patch for a uid/gid shifting bind mount Christian Brauner
  1 sibling, 3 replies; 9+ messages in thread
From: James Bottomley @ 2019-11-30 21:21 UTC (permalink / raw)
  To: linux-fsdevel
  Cc: dhowells, Al Viro, Miklos Szeredi, linux-unionfs, Seth Forshee

In order to prepare for implementing shiftfs as a property changing
bind mount, the path (which contains the vfsmount) must be threaded
through everywhere we are going to do either a permission check or an
attribute get/set so that we can arrange for the credentials for the
operation to be based on the bind mount properties rather than those
of current.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/base/devtmpfs.c   |  8 +++++--
 fs/attr.c                 |  4 +++-
 fs/cachefiles/interface.c |  6 +++--
 fs/coredump.c             |  4 ++--
 fs/ecryptfs/inode.c       |  9 ++++---
 fs/inode.c                |  7 +++---
 fs/namei.c                |  2 +-
 fs/nfsd/vfs.c             |  9 +++++--
 fs/open.c                 | 19 ++++++++-------
 fs/overlayfs/copy_up.c    | 60 +++++++++++++++++++++++++++--------------------
 fs/overlayfs/dir.c        | 16 ++++++++++---
 fs/overlayfs/inode.c      |  6 +++--
 fs/overlayfs/overlayfs.h  |  2 +-
 fs/overlayfs/super.c      |  3 ++-
 fs/utimes.c               |  2 +-
 include/linux/fs.h        |  6 ++---
 16 files changed, 102 insertions(+), 61 deletions(-)

diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 30d0523014e0..35488f7140a9 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -224,13 +224,17 @@ static int handle_create(const char *nodename, umode_t mode, kuid_t uid,
 	err = vfs_mknod(d_inode(path.dentry), dentry, mode, dev->devt);
 	if (!err) {
 		struct iattr newattrs;
+		struct path newpath = {
+			.mnt = path.mnt,
+			.dentry = dentry,
+		};
 
 		newattrs.ia_mode = mode;
 		newattrs.ia_uid = uid;
 		newattrs.ia_gid = gid;
 		newattrs.ia_valid = ATTR_MODE|ATTR_UID|ATTR_GID;
 		inode_lock(d_inode(dentry));
-		notify_change(dentry, &newattrs, NULL);
+		notify_change(&newpath, &newattrs, NULL);
 		inode_unlock(d_inode(dentry));
 
 		/* mark as kernel-created inode */
@@ -337,7 +341,7 @@ static int handle_remove(const char *nodename, struct device *dev)
 			newattrs.ia_valid =
 				ATTR_UID|ATTR_GID|ATTR_MODE;
 			inode_lock(d_inode(dentry));
-			notify_change(dentry, &newattrs, NULL);
+			notify_change(&p, &newattrs, NULL);
 			inode_unlock(d_inode(dentry));
 			err = vfs_unlink(d_inode(parent.dentry), dentry, NULL);
 			if (!err || err == -ENOENT)
diff --git a/fs/attr.c b/fs/attr.c
index df28035aa23e..370b18807f05 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -226,8 +226,10 @@ EXPORT_SYMBOL(setattr_copy);
  * the file open for write, as there can be no conflicting delegation in
  * that case.
  */
-int notify_change(struct dentry * dentry, struct iattr * attr, struct inode **delegated_inode)
+int notify_change(const struct path *path, struct iattr * attr,
+		  struct inode **delegated_inode)
 {
+	struct dentry *dentry = path->dentry;
 	struct inode *inode = dentry->d_inode;
 	umode_t mode = inode->i_mode;
 	int error;
diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c
index 4cea5fbf695e..aa82d95890fa 100644
--- a/fs/cachefiles/interface.c
+++ b/fs/cachefiles/interface.c
@@ -436,6 +436,7 @@ static int cachefiles_attr_changed(struct fscache_object *_object)
 	uint64_t ni_size;
 	loff_t oi_size;
 	int ret;
+	struct path *path;
 
 	ni_size = _object->store_limit_l;
 
@@ -466,18 +467,19 @@ static int cachefiles_attr_changed(struct fscache_object *_object)
 	/* if there's an extension to a partial page at the end of the backing
 	 * file, we need to discard the partial page so that we pick up new
 	 * data after it */
+	path = &(struct path) { .mnt = cache->mnt, .dentry = object->backer };
 	if (oi_size & ~PAGE_MASK && ni_size > oi_size) {
 		_debug("discard tail %llx", oi_size);
 		newattrs.ia_valid = ATTR_SIZE;
 		newattrs.ia_size = oi_size & PAGE_MASK;
-		ret = notify_change(object->backer, &newattrs, NULL);
+		ret = notify_change(path, &newattrs, NULL);
 		if (ret < 0)
 			goto truncate_failed;
 	}
 
 	newattrs.ia_valid = ATTR_SIZE;
 	newattrs.ia_size = ni_size;
-	ret = notify_change(object->backer, &newattrs, NULL);
+	ret = notify_change(path, &newattrs, NULL);
 
 truncate_failed:
 	inode_unlock(d_inode(object->backer));
diff --git a/fs/coredump.c b/fs/coredump.c
index b1ea7dfbd149..69899bfb025a 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -775,7 +775,7 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 			goto close_fail;
 		if (!(cprm.file->f_mode & FMODE_CAN_WRITE))
 			goto close_fail;
-		if (do_truncate(cprm.file->f_path.dentry, 0, 0, cprm.file))
+		if (do_truncate(&cprm.file->f_path, 0, 0, cprm.file))
 			goto close_fail;
 	}
 
@@ -879,7 +879,7 @@ void dump_truncate(struct coredump_params *cprm)
 	if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
 		offset = file->f_op->llseek(file, 0, SEEK_CUR);
 		if (i_size_read(file->f_mapping->host) < offset)
-			do_truncate(file->f_path.dentry, offset, 0, file);
+			do_truncate(&file->f_path, offset, 0, file);
 	}
 }
 EXPORT_SYMBOL(dump_truncate);
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index e23752d9a79f..72c45b9419d0 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -852,10 +852,11 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
 
 	rc = truncate_upper(dentry, &ia, &lower_ia);
 	if (!rc && lower_ia.ia_valid & ATTR_SIZE) {
-		struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+		struct path *path = ecryptfs_dentry_to_lower_path(dentry);
+		struct dentry *lower_dentry = path->dentry;
 
 		inode_lock(d_inode(lower_dentry));
-		rc = notify_change(lower_dentry, &lower_ia, NULL);
+		rc = notify_change(path, &lower_ia, NULL);
 		inode_unlock(d_inode(lower_dentry));
 	}
 	return rc;
@@ -883,6 +884,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia)
 {
 	int rc = 0;
 	struct dentry *lower_dentry;
+	struct path *lower_path;
 	struct iattr lower_ia;
 	struct inode *inode;
 	struct inode *lower_inode;
@@ -897,6 +899,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia)
 	inode = d_inode(dentry);
 	lower_inode = ecryptfs_inode_to_lower(inode);
 	lower_dentry = ecryptfs_dentry_to_lower(dentry);
+	lower_path = ecryptfs_dentry_to_lower_path(dentry);
 	mutex_lock(&crypt_stat->cs_mutex);
 	if (d_is_dir(dentry))
 		crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
@@ -959,7 +962,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia)
 		lower_ia.ia_valid &= ~ATTR_MODE;
 
 	inode_lock(d_inode(lower_dentry));
-	rc = notify_change(lower_dentry, &lower_ia, NULL);
+	rc = notify_change(lower_path, &lower_ia, NULL);
 	inode_unlock(d_inode(lower_dentry));
 out:
 	fsstack_copy_attr_all(inode, lower_inode);
diff --git a/fs/inode.c b/fs/inode.c
index fef457a42882..f2cc96ebede4 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1810,7 +1810,7 @@ int dentry_needs_remove_privs(struct dentry *dentry)
 	return mask;
 }
 
-static int __remove_privs(struct dentry *dentry, int kill)
+static int __remove_privs(struct path *path, int kill)
 {
 	struct iattr newattrs;
 
@@ -1819,7 +1819,7 @@ static int __remove_privs(struct dentry *dentry, int kill)
 	 * Note we call this on write, so notify_change will not
 	 * encounter any conflicting delegations:
 	 */
-	return notify_change(dentry, &newattrs, NULL);
+	return notify_change(path, &newattrs, NULL);
 }
 
 /*
@@ -1828,6 +1828,7 @@ static int __remove_privs(struct dentry *dentry, int kill)
  */
 int file_remove_privs(struct file *file)
 {
+	struct path *path = &file->f_path;
 	struct dentry *dentry = file_dentry(file);
 	struct inode *inode = file_inode(file);
 	int kill;
@@ -1846,7 +1847,7 @@ int file_remove_privs(struct file *file)
 	if (kill < 0)
 		return kill;
 	if (kill)
-		error = __remove_privs(dentry, kill);
+		error = __remove_privs(path, kill);
 	if (!error)
 		inode_has_no_xattr(inode);
 
diff --git a/fs/namei.c b/fs/namei.c
index 671c3c1a3425..900c826161ef 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2995,7 +2995,7 @@ static int handle_truncate(struct file *filp)
 	if (!error)
 		error = security_path_truncate(path);
 	if (!error) {
-		error = do_truncate(path->dentry, 0,
+		error = do_truncate(path, 0,
 				    ATTR_MTIME|ATTR_CTIME|ATTR_OPEN,
 				    filp);
 	}
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index bd0a385df3fc..5e758749cbc4 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -362,6 +362,7 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
 {
 	struct dentry	*dentry;
 	struct inode	*inode;
+	const struct path *path;
 	int		accmode = NFSD_MAY_SATTR;
 	umode_t		ftype = 0;
 	__be32		err;
@@ -402,6 +403,10 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
 
 	dentry = fhp->fh_dentry;
 	inode = d_inode(dentry);
+	path = &(struct path){
+		.mnt = fhp->fh_export->ex_path.mnt,
+		.dentry = dentry,
+	};
 
 	/* Ignore any mode updates on symlinks */
 	if (S_ISLNK(inode->i_mode))
@@ -442,7 +447,7 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
 			.ia_size	= iap->ia_size,
 		};
 
-		host_err = notify_change(dentry, &size_attr, NULL);
+		host_err = notify_change(path, &size_attr, NULL);
 		if (host_err)
 			goto out_unlock;
 		iap->ia_valid &= ~ATTR_SIZE;
@@ -457,7 +462,7 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
 	}
 
 	iap->ia_valid |= ATTR_CTIME;
-	host_err = notify_change(dentry, iap, NULL);
+	host_err = notify_change(path, iap, NULL);
 
 out_unlock:
 	fh_unlock(fhp);
diff --git a/fs/open.c b/fs/open.c
index b62f5c0923a8..033e2112fbda 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -35,11 +35,12 @@
 
 #include "internal.h"
 
-int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs,
+int do_truncate(const struct path *path, loff_t length, unsigned int time_attrs,
 	struct file *filp)
 {
 	int ret;
 	struct iattr newattrs;
+	struct dentry *dentry = path->dentry;
 
 	/* Not pretty: "inode->i_size" shouldn't really be signed. But it is. */
 	if (length < 0)
@@ -61,7 +62,7 @@ int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs,
 
 	inode_lock(dentry->d_inode);
 	/* Note any delegations or leases have already been broken: */
-	ret = notify_change(dentry, &newattrs, NULL);
+	ret = notify_change(path, &newattrs, NULL);
 	inode_unlock(dentry->d_inode);
 	return ret;
 }
@@ -107,7 +108,7 @@ long vfs_truncate(const struct path *path, loff_t length)
 	if (!error)
 		error = security_path_truncate(path);
 	if (!error)
-		error = do_truncate(path->dentry, length, 0, NULL);
+		error = do_truncate(path, length, 0, NULL);
 
 put_write_and_out:
 	put_write_access(inode);
@@ -155,7 +156,7 @@ COMPAT_SYSCALL_DEFINE2(truncate, const char __user *, path, compat_off_t, length
 long do_sys_ftruncate(unsigned int fd, loff_t length, int small)
 {
 	struct inode *inode;
-	struct dentry *dentry;
+	struct path *path;
 	struct fd f;
 	int error;
 
@@ -171,8 +172,8 @@ long do_sys_ftruncate(unsigned int fd, loff_t length, int small)
 	if (f.file->f_flags & O_LARGEFILE)
 		small = 0;
 
-	dentry = f.file->f_path.dentry;
-	inode = dentry->d_inode;
+	path = &f.file->f_path;
+	inode = path->dentry->d_inode;
 	error = -EINVAL;
 	if (!S_ISREG(inode->i_mode) || !(f.file->f_mode & FMODE_WRITE))
 		goto out_putf;
@@ -192,7 +193,7 @@ long do_sys_ftruncate(unsigned int fd, loff_t length, int small)
 	if (!error)
 		error = security_path_truncate(&f.file->f_path);
 	if (!error)
-		error = do_truncate(dentry, length, ATTR_MTIME|ATTR_CTIME, f.file);
+		error = do_truncate(path, length, ATTR_MTIME|ATTR_CTIME, f.file);
 	sb_end_write(inode->i_sb);
 out_putf:
 	fdput(f);
@@ -558,7 +559,7 @@ static int chmod_common(const struct path *path, umode_t mode)
 		goto out_unlock;
 	newattrs.ia_mode = (mode & S_IALLUGO) | (inode->i_mode & ~S_IALLUGO);
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
-	error = notify_change(path->dentry, &newattrs, &delegated_inode);
+	error = notify_change(path, &newattrs, &delegated_inode);
 out_unlock:
 	inode_unlock(inode);
 	if (delegated_inode) {
@@ -649,7 +650,7 @@ static int chown_common(const struct path *path, uid_t user, gid_t group)
 	inode_lock(inode);
 	error = security_path_chown(path, uid, gid);
 	if (!error)
-		error = notify_change(path->dentry, &newattrs, &delegated_inode);
+		error = notify_change(path, &newattrs, &delegated_inode);
 	inode_unlock(inode);
 	if (delegated_inode) {
 		error = break_deleg_wait(&delegated_inode);
diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index b801c6353100..52bfca5016fe 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -177,17 +177,17 @@ static int ovl_copy_up_data(struct path *old, struct path *new, loff_t len)
 	return error;
 }
 
-static int ovl_set_size(struct dentry *upperdentry, struct kstat *stat)
+static int ovl_set_size(struct path *upperpath, struct kstat *stat)
 {
 	struct iattr attr = {
 		.ia_valid = ATTR_SIZE,
 		.ia_size = stat->size,
 	};
 
-	return notify_change(upperdentry, &attr, NULL);
+	return notify_change(upperpath, &attr, NULL);
 }
 
-static int ovl_set_timestamps(struct dentry *upperdentry, struct kstat *stat)
+static int ovl_set_timestamps(struct path *upperpath, struct kstat *stat)
 {
 	struct iattr attr = {
 		.ia_valid =
@@ -196,10 +196,10 @@ static int ovl_set_timestamps(struct dentry *upperdentry, struct kstat *stat)
 		.ia_mtime = stat->mtime,
 	};
 
-	return notify_change(upperdentry, &attr, NULL);
+	return notify_change(upperpath, &attr, NULL);
 }
 
-int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
+int ovl_set_attr(struct path *upperpath, struct kstat *stat)
 {
 	int err = 0;
 
@@ -208,7 +208,7 @@ int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
 			.ia_valid = ATTR_MODE,
 			.ia_mode = stat->mode,
 		};
-		err = notify_change(upperdentry, &attr, NULL);
+		err = notify_change(upperpath, &attr, NULL);
 	}
 	if (!err) {
 		struct iattr attr = {
@@ -216,10 +216,10 @@ int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
 			.ia_uid = stat->uid,
 			.ia_gid = stat->gid,
 		};
-		err = notify_change(upperdentry, &attr, NULL);
+		err = notify_change(upperpath, &attr, NULL);
 	}
 	if (!err)
-		ovl_set_timestamps(upperdentry, stat);
+		ovl_set_timestamps(upperpath, stat);
 
 	return err;
 }
@@ -389,7 +389,7 @@ struct ovl_copy_up_ctx {
 	struct kstat stat;
 	struct kstat pstat;
 	const char *link;
-	struct dentry *destdir;
+	struct path *destpath;
 	struct qstr destname;
 	struct dentry *workdir;
 	bool origin;
@@ -403,6 +403,9 @@ static int ovl_link_up(struct ovl_copy_up_ctx *c)
 	struct dentry *upper;
 	struct dentry *upperdir = ovl_dentry_upper(c->parent);
 	struct inode *udir = d_inode(upperdir);
+	struct path upperpath;
+
+	ovl_path_upper(c->parent, &upperpath);
 
 	/* Mark parent "impure" because it may now contain non-pure upper */
 	err = ovl_set_impure(c->parent, upperdir);
@@ -423,7 +426,7 @@ static int ovl_link_up(struct ovl_copy_up_ctx *c)
 
 		if (!err) {
 			/* Restore timestamps on parent (best effort) */
-			ovl_set_timestamps(upperdir, &c->pstat);
+			ovl_set_timestamps(&upperpath, &c->pstat);
 			ovl_dentry_set_upper_alias(c->dentry);
 		}
 	}
@@ -439,7 +442,9 @@ static int ovl_link_up(struct ovl_copy_up_ctx *c)
 static int ovl_copy_up_inode(struct ovl_copy_up_ctx *c, struct dentry *temp)
 {
 	int err;
+	struct path upperpath, *path;
 
+	ovl_path_upper(c->dentry, &upperpath);
 	/*
 	 * Copy up data first and then xattrs. Writing data after
 	 * xattrs will remove security.capability xattr automatically.
@@ -447,7 +452,6 @@ static int ovl_copy_up_inode(struct ovl_copy_up_ctx *c, struct dentry *temp)
 	if (S_ISREG(c->stat.mode) && !c->metacopy) {
 		struct path upperpath, datapath;
 
-		ovl_path_upper(c->dentry, &upperpath);
 		if (WARN_ON(upperpath.dentry != NULL))
 			return -EIO;
 		upperpath.dentry = temp;
@@ -481,12 +485,13 @@ static int ovl_copy_up_inode(struct ovl_copy_up_ctx *c, struct dentry *temp)
 		if (err)
 			return err;
 	}
+	path = &(struct path) {	.mnt = upperpath.mnt, .dentry = temp };
 
 	inode_lock(temp->d_inode);
 	if (c->metacopy)
-		err = ovl_set_size(temp, &c->stat);
+		err = ovl_set_size(path, &c->stat);
 	if (!err)
-		err = ovl_set_attr(temp, &c->stat);
+		err = ovl_set_attr(path, &c->stat);
 	inode_unlock(temp->d_inode);
 
 	return err;
@@ -527,7 +532,7 @@ static void ovl_revert_cu_creds(struct ovl_cu_creds *cc)
 static int ovl_copy_up_workdir(struct ovl_copy_up_ctx *c)
 {
 	struct inode *inode;
-	struct inode *udir = d_inode(c->destdir), *wdir = d_inode(c->workdir);
+	struct inode *udir = d_inode(c->destpath->dentry), *wdir = d_inode(c->workdir);
 	struct dentry *temp, *upper;
 	struct ovl_cu_creds cc;
 	int err;
@@ -538,7 +543,7 @@ static int ovl_copy_up_workdir(struct ovl_copy_up_ctx *c)
 		.link = c->link
 	};
 
-	err = ovl_lock_rename_workdir(c->workdir, c->destdir);
+	err = ovl_lock_rename_workdir(c->workdir, c->destpath->dentry);
 	if (err)
 		return err;
 
@@ -563,7 +568,7 @@ static int ovl_copy_up_workdir(struct ovl_copy_up_ctx *c)
 			goto cleanup;
 	}
 
-	upper = lookup_one_len(c->destname.name, c->destdir, c->destname.len);
+	upper = lookup_one_len(c->destname.name, c->destpath->dentry, c->destname.len);
 	err = PTR_ERR(upper);
 	if (IS_ERR(upper))
 		goto cleanup;
@@ -580,7 +585,7 @@ static int ovl_copy_up_workdir(struct ovl_copy_up_ctx *c)
 	if (S_ISDIR(inode->i_mode))
 		ovl_set_flag(OVL_WHITEOUTS, inode);
 unlock:
-	unlock_rename(c->workdir, c->destdir);
+	unlock_rename(c->workdir, c->destpath->dentry);
 
 	return err;
 
@@ -593,7 +598,7 @@ static int ovl_copy_up_workdir(struct ovl_copy_up_ctx *c)
 /* Copyup using O_TMPFILE which does not require cross dir locking */
 static int ovl_copy_up_tmpfile(struct ovl_copy_up_ctx *c)
 {
-	struct inode *udir = d_inode(c->destdir);
+	struct inode *udir = d_inode(c->destpath->dentry);
 	struct dentry *temp, *upper;
 	struct ovl_cu_creds cc;
 	int err;
@@ -614,7 +619,7 @@ static int ovl_copy_up_tmpfile(struct ovl_copy_up_ctx *c)
 
 	inode_lock_nested(udir, I_MUTEX_PARENT);
 
-	upper = lookup_one_len(c->destname.name, c->destdir, c->destname.len);
+	upper = lookup_one_len(c->destname.name, c->destpath->dentry, c->destname.len);
 	err = PTR_ERR(upper);
 	if (!IS_ERR(upper)) {
 		err = ovl_do_link(temp, udir, upper);
@@ -650,6 +655,7 @@ static int ovl_do_copy_up(struct ovl_copy_up_ctx *c)
 	int err;
 	struct ovl_fs *ofs = c->dentry->d_sb->s_fs_info;
 	bool to_index = false;
+	struct path path;
 
 	/*
 	 * Indexed non-dir is copied up directly to the index entry and then
@@ -669,7 +675,9 @@ static int ovl_do_copy_up(struct ovl_copy_up_ctx *c)
 		c->origin = true;
 
 	if (to_index) {
-		c->destdir = ovl_indexdir(c->dentry->d_sb);
+		path.dentry = ovl_indexdir(c->dentry->d_sb);
+		path.mnt = ofs->upper_mnt;
+		c->destpath = &path;
 		err = ovl_get_index_name(c->lowerpath.dentry, &c->destname);
 		if (err)
 			return err;
@@ -681,7 +689,7 @@ static int ovl_do_copy_up(struct ovl_copy_up_ctx *c)
 		 * Mark parent "impure" because it may now contain non-pure
 		 * upper
 		 */
-		err = ovl_set_impure(c->parent, c->destdir);
+		err = ovl_set_impure(c->parent, c->destpath->dentry);
 		if (err)
 			return err;
 	}
@@ -701,19 +709,21 @@ static int ovl_do_copy_up(struct ovl_copy_up_ctx *c)
 		/* Initialize nlink for copy up of disconnected dentry */
 		err = ovl_set_nlink_upper(c->dentry);
 	} else {
-		struct inode *udir = d_inode(c->destdir);
+		struct inode *udir = d_inode(c->destpath->dentry);
 
 		/* Restore timestamps on parent (best effort) */
 		inode_lock(udir);
-		ovl_set_timestamps(c->destdir, &c->pstat);
+		ovl_set_timestamps(c->destpath, &c->pstat);
 		inode_unlock(udir);
 
 		ovl_dentry_set_upper_alias(c->dentry);
 	}
 
 out:
-	if (to_index)
+	if (to_index) {
 		kfree(c->destname.name);
+		c->destpath = NULL;
+	}
 	return err;
 }
 
@@ -809,7 +819,7 @@ static int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry,
 
 	if (parent) {
 		ovl_path_upper(parent, &parentpath);
-		ctx.destdir = parentpath.dentry;
+		ctx.destpath = &parentpath;
 		ctx.destname = dentry->d_name;
 
 		err = vfs_getattr(&parentpath, &ctx.pstat,
diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c
index 702aa63f6774..d694c5740bdb 100644
--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -334,7 +334,7 @@ static struct dentry *ovl_clear_empty(struct dentry *dentry,
 	struct inode *wdir = workdir->d_inode;
 	struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
 	struct inode *udir = upperdir->d_inode;
-	struct path upperpath;
+	struct path upperpath, *opaquepath;
 	struct dentry *upper;
 	struct dentry *opaquedir;
 	struct kstat stat;
@@ -373,8 +373,13 @@ static struct dentry *ovl_clear_empty(struct dentry *dentry,
 	if (err)
 		goto out_cleanup;
 
+	opaquepath = &(struct path){
+		.mnt = upperpath.mnt,
+		.dentry = opaquedir
+	};
+
 	inode_lock(opaquedir->d_inode);
-	err = ovl_set_attr(opaquedir, &stat);
+	err = ovl_set_attr(opaquepath, &stat);
 	inode_unlock(opaquedir->d_inode);
 	if (err)
 		goto out_cleanup;
@@ -435,10 +440,13 @@ static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode,
 	struct inode *udir = upperdir->d_inode;
 	struct dentry *upper;
 	struct dentry *newdentry;
+	struct path path;
 	int err;
 	struct posix_acl *acl, *default_acl;
 	bool hardlink = !!cattr->hardlink;
 
+	ovl_path_upper(dentry, &path);
+
 	if (WARN_ON(!workdir))
 		return -EROFS;
 
@@ -478,8 +486,10 @@ static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode,
 			.ia_valid = ATTR_MODE,
 			.ia_mode = cattr->mode,
 		};
+
+		path.dentry = newdentry;
 		inode_lock(newdentry->d_inode);
-		err = notify_change(newdentry, &attr, NULL);
+		err = notify_change(&path, &attr, NULL);
 		inode_unlock(newdentry->d_inode);
 		if (err)
 			goto out_cleanup;
diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index bc14781886bf..218540003872 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -45,8 +45,10 @@ int ovl_setattr(struct dentry *dentry, struct iattr *attr)
 		err = ovl_copy_up_with_data(dentry);
 	if (!err) {
 		struct inode *winode = NULL;
+		struct path path;
 
-		upperdentry = ovl_dentry_upper(dentry);
+		ovl_path_upper(dentry, &path);
+		upperdentry = path.dentry;
 
 		if (attr->ia_valid & ATTR_SIZE) {
 			winode = d_inode(upperdentry);
@@ -60,7 +62,7 @@ int ovl_setattr(struct dentry *dentry, struct iattr *attr)
 
 		inode_lock(upperdentry->d_inode);
 		old_cred = ovl_override_creds(dentry->d_sb);
-		err = notify_change(upperdentry, attr, NULL);
+		err = notify_change(&path, attr, NULL);
 		revert_creds(old_cred);
 		if (!err)
 			ovl_copyattr(upperdentry->d_inode, dentry->d_inode);
diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
index 6934bcf030f0..dc50b97a5e68 100644
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -423,7 +423,7 @@ int ovl_copy_up_with_data(struct dentry *dentry);
 int ovl_copy_up_flags(struct dentry *dentry, int flags);
 int ovl_maybe_copy_up(struct dentry *dentry, int flags);
 int ovl_copy_xattr(struct dentry *old, struct dentry *new);
-int ovl_set_attr(struct dentry *upper, struct kstat *stat);
+int ovl_set_attr(struct path *upper, struct kstat *stat);
 struct ovl_fh *ovl_encode_real_fh(struct dentry *real, bool is_upper);
 int ovl_set_origin(struct dentry *dentry, struct dentry *lower,
 		   struct dentry *upper);
diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index afbcb116a7f1..03b6d4a9d43a 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -632,6 +632,7 @@ static struct dentry *ovl_workdir_create(struct ovl_fs *ofs,
 			.ia_valid = ATTR_MODE,
 			.ia_mode = S_IFDIR | 0,
 		};
+		const struct path path = { .mnt = mnt, .dentry = work };
 
 		if (work->d_inode) {
 			err = -EEXIST;
@@ -675,7 +676,7 @@ static struct dentry *ovl_workdir_create(struct ovl_fs *ofs,
 
 		/* Clear any inherited mode bits */
 		inode_lock(work->d_inode);
-		err = notify_change(work, &attr, NULL);
+		err = notify_change(&path, &attr, NULL);
 		inode_unlock(work->d_inode);
 		if (err)
 			goto out_dput;
diff --git a/fs/utimes.c b/fs/utimes.c
index 1ba3f7883870..87da3e974a75 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -57,7 +57,7 @@ static int utimes_common(const struct path *path, struct timespec64 *times)
 	}
 retry_deleg:
 	inode_lock(inode);
-	error = notify_change(path->dentry, &newattrs, &delegated_inode);
+	error = notify_change(path, &newattrs, &delegated_inode);
 	inode_unlock(inode);
 	if (delegated_inode) {
 		error = break_deleg_wait(&delegated_inode);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 51f1408180f5..96356b884de7 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2519,8 +2519,8 @@ struct filename {
 static_assert(offsetof(struct filename, iname) % sizeof(long) == 0);
 
 extern long vfs_truncate(const struct path *, loff_t);
-extern int do_truncate(struct dentry *, loff_t start, unsigned int time_attrs,
-		       struct file *filp);
+extern int do_truncate(const struct path *p, loff_t start,
+		       unsigned int time_attrs, struct file *filp);
 extern int vfs_fallocate(struct file *file, int mode, loff_t offset,
 			loff_t len);
 extern long do_sys_open(int dfd, const char __user *filename, int flags,
@@ -2867,7 +2867,7 @@ extern void emergency_remount(void);
 #ifdef CONFIG_BLOCK
 extern sector_t bmap(struct inode *, sector_t);
 #endif
-extern int notify_change(struct dentry *, struct iattr *, struct inode **);
+extern int notify_change(const struct path *, struct iattr *, struct inode **);
 extern int inode_permission(struct inode *, int);
 extern int generic_permission(struct inode *, int);
 extern int __check_sticky(struct inode *dir, struct inode *inode);
-- 
2.16.4

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry
  2019-11-30 21:21 ` [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry James Bottomley
@ 2019-12-01  7:04   ` Amir Goldstein
  2019-12-01 16:00     ` James Bottomley
  2019-12-03  0:54     ` [PATCH v2] " James Bottomley
  2019-12-01 11:47   ` [PATCH 1/1] " Matthew Wilcox
  2019-12-03  9:18   ` [fs] 53d4a4300b: WARNING:at_fs/overlayfs/copy_up.c:#ovl_copy_up_inode[overlay] kernel test robot
  2 siblings, 2 replies; 9+ messages in thread
From: Amir Goldstein @ 2019-12-01  7:04 UTC (permalink / raw)
  To: James Bottomley
  Cc: linux-fsdevel, David Howells, Al Viro, Miklos Szeredi, overlayfs,
	Seth Forshee

Hi James!

On Sat, Nov 30, 2019 at 11:21 PM James Bottomley
<James.Bottomley@hansenpartnership.com> wrote:
>
> In order to prepare for implementing shiftfs as a property changing
> bind mount, the path (which contains the vfsmount) must be threaded
> through everywhere we are going to do either a permission check or an

I am curious how bind/shift mount is expected to handle inode_permission().

Otherwise, I am fine with the change, short of some style comments
below...

> attribute get/set so that we can arrange for the credentials for the
> operation to be based on the bind mount properties rather than those
> of current.
>
> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
> ---
>  drivers/base/devtmpfs.c   |  8 +++++--
>  fs/attr.c                 |  4 +++-
>  fs/cachefiles/interface.c |  6 +++--
>  fs/coredump.c             |  4 ++--
>  fs/ecryptfs/inode.c       |  9 ++++---
>  fs/inode.c                |  7 +++---
>  fs/namei.c                |  2 +-
>  fs/nfsd/vfs.c             |  9 +++++--
>  fs/open.c                 | 19 ++++++++-------
>  fs/overlayfs/copy_up.c    | 60 +++++++++++++++++++++++++++--------------------
>  fs/overlayfs/dir.c        | 16 ++++++++++---
>  fs/overlayfs/inode.c      |  6 +++--
>  fs/overlayfs/overlayfs.h  |  2 +-
>  fs/overlayfs/super.c      |  3 ++-
>  fs/utimes.c               |  2 +-
>  include/linux/fs.h        |  6 ++---
>  16 files changed, 102 insertions(+), 61 deletions(-)
>
[...]

> diff --git a/fs/attr.c b/fs/attr.c
> index df28035aa23e..370b18807f05 100644
> --- a/fs/attr.c
> +++ b/fs/attr.c
> @@ -226,8 +226,10 @@ EXPORT_SYMBOL(setattr_copy);
>   * the file open for write, as there can be no conflicting delegation in
>   * that case.
>   */
> -int notify_change(struct dentry * dentry, struct iattr * attr, struct inode **delegated_inode)
> +int notify_change(const struct path *path, struct iattr * attr,
> +                 struct inode **delegated_inode)
>  {
> +       struct dentry *dentry = path->dentry;

I suppose passing path down to all security/ima hooks is the next step?

>         struct inode *inode = dentry->d_inode;
>         umode_t mode = inode->i_mode;
>         int error;
> diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c
> index 4cea5fbf695e..aa82d95890fa 100644
> --- a/fs/cachefiles/interface.c
> +++ b/fs/cachefiles/interface.c
> @@ -436,6 +436,7 @@ static int cachefiles_attr_changed(struct fscache_object *_object)
>         uint64_t ni_size;
>         loff_t oi_size;
>         int ret;
> +       struct path *path;
>
>         ni_size = _object->store_limit_l;
>
> @@ -466,18 +467,19 @@ static int cachefiles_attr_changed(struct fscache_object *_object)
>         /* if there's an extension to a partial page at the end of the backing
>          * file, we need to discard the partial page so that we pick up new
>          * data after it */
> +       path = &(struct path) { .mnt = cache->mnt, .dentry = object->backer };

This style is weird for me. Is it just me?
If you just need the struct once, I rather you define it inside function args.
Otherwise, I'd rather the local path var wasn't a pointer, but the
actual struct.


[...]

> diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
> index e23752d9a79f..72c45b9419d0 100644
> --- a/fs/ecryptfs/inode.c
> +++ b/fs/ecryptfs/inode.c
> @@ -852,10 +852,11 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
>
>         rc = truncate_upper(dentry, &ia, &lower_ia);
>         if (!rc && lower_ia.ia_valid & ATTR_SIZE) {
> -               struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
> +               struct path *path = ecryptfs_dentry_to_lower_path(dentry);
> +               struct dentry *lower_dentry = path->dentry;
>

Use lower_path for conformity.


[...]

> --- a/fs/inode.c
> +++ b/fs/inode.c
> @@ -1810,7 +1810,7 @@ int dentry_needs_remove_privs(struct dentry *dentry)
>         return mask;
>  }
>
> -static int __remove_privs(struct dentry *dentry, int kill)
> +static int __remove_privs(struct path *path, int kill)
>  {
>         struct iattr newattrs;
>
> @@ -1819,7 +1819,7 @@ static int __remove_privs(struct dentry *dentry, int kill)
>          * Note we call this on write, so notify_change will not
>          * encounter any conflicting delegations:
>          */
> -       return notify_change(dentry, &newattrs, NULL);
> +       return notify_change(path, &newattrs, NULL);
>  }
>
>  /*
> @@ -1828,6 +1828,7 @@ static int __remove_privs(struct dentry *dentry, int kill)
>   */
>  int file_remove_privs(struct file *file)
>  {
> +       struct path *path = &file->f_path;
>         struct dentry *dentry = file_dentry(file);
>         struct inode *inode = file_inode(file);
>         int kill;
> @@ -1846,7 +1847,7 @@ int file_remove_privs(struct file *file)

I suppose next step is to pass path down to
dentry_needs_remove_privs() => security_inode_need_killpriv()
or rather a new security_path_need_killpriv()?

[...]

> diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
> index bd0a385df3fc..5e758749cbc4 100644
> --- a/fs/nfsd/vfs.c
> +++ b/fs/nfsd/vfs.c
> @@ -362,6 +362,7 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
>  {
>         struct dentry   *dentry;
>         struct inode    *inode;
> +       const struct path *path;
>         int             accmode = NFSD_MAY_SATTR;
>         umode_t         ftype = 0;
>         __be32          err;
> @@ -402,6 +403,10 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
>
>         dentry = fhp->fh_dentry;
>         inode = d_inode(dentry);
> +       path = &(struct path){
> +               .mnt = fhp->fh_export->ex_path.mnt,
> +               .dentry = dentry,
> +       };
>

There is no longer use for local var dentry.
Use local var path and assign fhp->fh_dentry directly to path.dentry.


[...]

> diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
> index b801c6353100..52bfca5016fe 100644
> --- a/fs/overlayfs/copy_up.c
> +++ b/fs/overlayfs/copy_up.c
> @@ -177,17 +177,17 @@ static int ovl_copy_up_data(struct path *old, struct path *new, loff_t len)
>         return error;
>  }
>
> -static int ovl_set_size(struct dentry *upperdentry, struct kstat *stat)
> +static int ovl_set_size(struct path *upperpath, struct kstat *stat)
>  {
>         struct iattr attr = {
>                 .ia_valid = ATTR_SIZE,
>                 .ia_size = stat->size,
>         };
>
> -       return notify_change(upperdentry, &attr, NULL);
> +       return notify_change(upperpath, &attr, NULL);
>  }
>
> -static int ovl_set_timestamps(struct dentry *upperdentry, struct kstat *stat)
> +static int ovl_set_timestamps(struct path *upperpath, struct kstat *stat)
>  {
>         struct iattr attr = {
>                 .ia_valid =
> @@ -196,10 +196,10 @@ static int ovl_set_timestamps(struct dentry *upperdentry, struct kstat *stat)
>                 .ia_mtime = stat->mtime,
>         };
>
> -       return notify_change(upperdentry, &attr, NULL);
> +       return notify_change(upperpath, &attr, NULL);
>  }
>
> -int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
> +int ovl_set_attr(struct path *upperpath, struct kstat *stat)
>  {
>         int err = 0;
>
> @@ -208,7 +208,7 @@ int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
>                         .ia_valid = ATTR_MODE,
>                         .ia_mode = stat->mode,
>                 };
> -               err = notify_change(upperdentry, &attr, NULL);
> +               err = notify_change(upperpath, &attr, NULL);
>         }
>         if (!err) {
>                 struct iattr attr = {
> @@ -216,10 +216,10 @@ int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
>                         .ia_uid = stat->uid,
>                         .ia_gid = stat->gid,
>                 };
> -               err = notify_change(upperdentry, &attr, NULL);
> +               err = notify_change(upperpath, &attr, NULL);
>         }
>         if (!err)
> -               ovl_set_timestamps(upperdentry, stat);
> +               ovl_set_timestamps(upperpath, stat);
>
>         return err;
>  }
> @@ -389,7 +389,7 @@ struct ovl_copy_up_ctx {
>         struct kstat stat;
>         struct kstat pstat;
>         const char *link;
> -       struct dentry *destdir;
> +       struct path *destpath;

It seems like you caused a lot of churn for that change and you only
use c->destpath in one place for ovl_set_timestamps(), so it might be
easier to compose destpath from c->destdir just in that one call site.

>         struct qstr destname;
>         struct dentry *workdir;
>         bool origin;
> @@ -403,6 +403,9 @@ static int ovl_link_up(struct ovl_copy_up_ctx *c)
>         struct dentry *upper;
>         struct dentry *upperdir = ovl_dentry_upper(c->parent);
>         struct inode *udir = d_inode(upperdir);
> +       struct path upperpath;
> +
> +       ovl_path_upper(c->parent, &upperpath);
>
>         /* Mark parent "impure" because it may now contain non-pure upper */
>         err = ovl_set_impure(c->parent, upperdir);
> @@ -423,7 +426,7 @@ static int ovl_link_up(struct ovl_copy_up_ctx *c)
>
>                 if (!err) {
>                         /* Restore timestamps on parent (best effort) */
> -                       ovl_set_timestamps(upperdir, &c->pstat);
> +                       ovl_set_timestamps(&upperpath, &c->pstat);
>                         ovl_dentry_set_upper_alias(c->dentry);
>                 }
>         }
> @@ -439,7 +442,9 @@ static int ovl_link_up(struct ovl_copy_up_ctx *c)
>  static int ovl_copy_up_inode(struct ovl_copy_up_ctx *c, struct dentry *temp)
>  {
>         int err;
> +       struct path upperpath, *path;
struct path temppath please.

... skipping a lot of unneeded churn...

> diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c
> index 702aa63f6774..d694c5740bdb 100644
> --- a/fs/overlayfs/dir.c
> +++ b/fs/overlayfs/dir.c
> @@ -334,7 +334,7 @@ static struct dentry *ovl_clear_empty(struct dentry *dentry,
>         struct inode *wdir = workdir->d_inode;
>         struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
>         struct inode *udir = upperdir->d_inode;
> -       struct path upperpath;
> +       struct path upperpath, *opaquepath;
>         struct dentry *upper;
>         struct dentry *opaquedir;
>         struct kstat stat;
> @@ -373,8 +373,13 @@ static struct dentry *ovl_clear_empty(struct dentry *dentry,
>         if (err)
>                 goto out_cleanup;
>
> +       opaquepath = &(struct path){
> +               .mnt = upperpath.mnt,
> +               .dentry = opaquedir
> +       };
> +

Please skip the local opaquepath pointer and use directly in function args.

>         inode_lock(opaquedir->d_inode);
> -       err = ovl_set_attr(opaquedir, &stat);
> +       err = ovl_set_attr(opaquepath, &stat);
>         inode_unlock(opaquedir->d_inode);
>         if (err)
>                 goto out_cleanup;
> @@ -435,10 +440,13 @@ static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode,
>         struct inode *udir = upperdir->d_inode;
>         struct dentry *upper;
>         struct dentry *newdentry;
> +       struct path path;

upperpath or newpath please.

>         int err;
>         struct posix_acl *acl, *default_acl;
>         bool hardlink = !!cattr->hardlink;
>
> +       ovl_path_upper(dentry, &path);
> +
>         if (WARN_ON(!workdir))
>                 return -EROFS;
>
> @@ -478,8 +486,10 @@ static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode,
>                         .ia_valid = ATTR_MODE,
>                         .ia_mode = cattr->mode,
>                 };
> +
> +               path.dentry = newdentry;
>                 inode_lock(newdentry->d_inode);
> -               err = notify_change(newdentry, &attr, NULL);
> +               err = notify_change(&path, &attr, NULL);
>                 inode_unlock(newdentry->d_inode);
>                 if (err)
>                         goto out_cleanup;
> diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
> index bc14781886bf..218540003872 100644
> --- a/fs/overlayfs/inode.c
> +++ b/fs/overlayfs/inode.c
> @@ -45,8 +45,10 @@ int ovl_setattr(struct dentry *dentry, struct iattr *attr)
>                 err = ovl_copy_up_with_data(dentry);
>         if (!err) {
>                 struct inode *winode = NULL;
> +               struct path path;

upperpath please. Otherwise it gets harder to tell between overlay path
and underlying path when reading the code.

>
> -               upperdentry = ovl_dentry_upper(dentry);
> +               ovl_path_upper(dentry, &path);
> +               upperdentry = path.dentry;
>
>                 if (attr->ia_valid & ATTR_SIZE) {
>                         winode = d_inode(upperdentry);
> @@ -60,7 +62,7 @@ int ovl_setattr(struct dentry *dentry, struct iattr *attr)
>
>                 inode_lock(upperdentry->d_inode);
>                 old_cred = ovl_override_creds(dentry->d_sb);
> -               err = notify_change(upperdentry, attr, NULL);
> +               err = notify_change(&path, attr, NULL);
>                 revert_creds(old_cred);
>                 if (!err)
>                         ovl_copyattr(upperdentry->d_inode, dentry->d_inode);
> diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
> index 6934bcf030f0..dc50b97a5e68 100644
> --- a/fs/overlayfs/overlayfs.h
> +++ b/fs/overlayfs/overlayfs.h
> @@ -423,7 +423,7 @@ int ovl_copy_up_with_data(struct dentry *dentry);
>  int ovl_copy_up_flags(struct dentry *dentry, int flags);
>  int ovl_maybe_copy_up(struct dentry *dentry, int flags);
>  int ovl_copy_xattr(struct dentry *old, struct dentry *new);
> -int ovl_set_attr(struct dentry *upper, struct kstat *stat);
> +int ovl_set_attr(struct path *upper, struct kstat *stat);

upperpath please, otherwise local var names for upper dentry/inode
can get messy.

Thanks,
Amir.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry
  2019-11-30 21:21 ` [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry James Bottomley
  2019-12-01  7:04   ` Amir Goldstein
@ 2019-12-01 11:47   ` " Matthew Wilcox
  2019-12-01 15:55     ` James Bottomley
  2019-12-03  9:18   ` [fs] 53d4a4300b: WARNING:at_fs/overlayfs/copy_up.c:#ovl_copy_up_inode[overlay] kernel test robot
  2 siblings, 1 reply; 9+ messages in thread
From: Matthew Wilcox @ 2019-12-01 11:47 UTC (permalink / raw)
  To: James Bottomley
  Cc: linux-fsdevel, dhowells, Al Viro, Miklos Szeredi, linux-unionfs,
	Seth Forshee

On Sat, Nov 30, 2019 at 01:21:08PM -0800, James Bottomley wrote:
> @@ -402,6 +403,10 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
>  
>  	dentry = fhp->fh_dentry;
>  	inode = d_inode(dentry);
> +	path = &(struct path){
> +		.mnt = fhp->fh_export->ex_path.mnt,
> +		.dentry = dentry,
> +	};

Is this really clearer than writing:

	path.mnt = fhp->fh_export->ex_path.mnt;
	path.dentry = dentry;

(there are a few other occurrences I'd change)

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry
  2019-12-01 11:47   ` [PATCH 1/1] " Matthew Wilcox
@ 2019-12-01 15:55     ` James Bottomley
  0 siblings, 0 replies; 9+ messages in thread
From: James Bottomley @ 2019-12-01 15:55 UTC (permalink / raw)
  To: Matthew Wilcox
  Cc: linux-fsdevel, dhowells, Al Viro, Miklos Szeredi, linux-unionfs,
	Seth Forshee

On Sun, 2019-12-01 at 03:47 -0800, Matthew Wilcox wrote:
> On Sat, Nov 30, 2019 at 01:21:08PM -0800, James Bottomley wrote:
> > @@ -402,6 +403,10 @@ nfsd_setattr(struct svc_rqst *rqstp, struct
> > svc_fh *fhp, struct iattr *iap,
> >  
> >  	dentry = fhp->fh_dentry;
> >  	inode = d_inode(dentry);
> > +	path = &(struct path){
> > +		.mnt = fhp->fh_export->ex_path.mnt,
> > +		.dentry = dentry,
> > +	};
> 
> Is this really clearer than writing:
> 
> 	path.mnt = fhp->fh_export->ex_path.mnt;
> 	path.dentry = dentry;

I'm not sure about clearer but certainly better: the general principle
is always do named structure initialization, so in my version any
unspecified fields are cleared.  In your version they're set to
whatever uninitialized data was on the stack.  For struct path, it
probably doesn't matter because it's only ever going to have two
elements for all time, but in general it does.

James

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry
  2019-12-01  7:04   ` Amir Goldstein
@ 2019-12-01 16:00     ` James Bottomley
  2019-12-03  0:54     ` [PATCH v2] " James Bottomley
  1 sibling, 0 replies; 9+ messages in thread
From: James Bottomley @ 2019-12-01 16:00 UTC (permalink / raw)
  To: Amir Goldstein
  Cc: linux-fsdevel, David Howells, Al Viro, Miklos Szeredi, overlayfs,
	Seth Forshee

On Sun, 2019-12-01 at 09:04 +0200, Amir Goldstein wrote:
> Hi James!
> 
> On Sat, Nov 30, 2019 at 11:21 PM James Bottomley
> <James.Bottomley@hansenpartnership.com> wrote:
> > 
> > In order to prepare for implementing shiftfs as a property changing
> > bind mount, the path (which contains the vfsmount) must be threaded
> > through everywhere we are going to do either a permission check or
> > an
> 
> I am curious how bind/shift mount is expected to handle
> inode_permission().

I should be posting the initial patch soon, so you can see.  However
the principle is pretty simple: at the top of the API you have to
install a fsuid/fsgid shifted override credential if the vfsmount is
marked for shifting.  To make that determination you need the path at
all those points, hence this patch.  However, anywhere in the stack
after this, you can make the determination either by the vfsmount flag
or by recognizing the shifted credential.  The latter is how I do this
in inode_permission

> Otherwise, I am fine with the change, short of some style comments
> below...

OK, will fix for v2.

James

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v2] fs: rethread notify_change to take a path instead of a dentry
  2019-12-01  7:04   ` Amir Goldstein
  2019-12-01 16:00     ` James Bottomley
@ 2019-12-03  0:54     ` " James Bottomley
  1 sibling, 0 replies; 9+ messages in thread
From: James Bottomley @ 2019-12-03  0:54 UTC (permalink / raw)
  To: Amir Goldstein
  Cc: linux-fsdevel, David Howells, Al Viro, Miklos Szeredi, overlayfs,
	Seth Forshee

In order to prepare for implementing shiftfs as a property changing
bind mount, the path (which contains the vfsmount) must be threaded
through everywhere we are going to do either a permission check or an
attribute get/set so that we can arrange for the credentials for the
operation to be based on the bind mount properties rather than those
of current.

---

v2: fix issues found by Amir Goldstein

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/base/devtmpfs.c   |  8 ++++++--
 fs/attr.c                 |  4 +++-
 fs/cachefiles/interface.c |  6 ++++--
 fs/coredump.c             |  4 ++--
 fs/ecryptfs/inode.c       |  9 ++++++---
 fs/inode.c                |  7 ++++---
 fs/namei.c                |  2 +-
 fs/nfsd/vfs.c             | 13 ++++++++-----
 fs/open.c                 | 19 ++++++++++---------
 fs/overlayfs/copy_up.c    | 40 ++++++++++++++++++++++++----------------
 fs/overlayfs/dir.c        | 10 ++++++++--
 fs/overlayfs/inode.c      |  6 ++++--
 fs/overlayfs/overlayfs.h  |  2 +-
 fs/overlayfs/super.c      |  3 ++-
 fs/utimes.c               |  2 +-
 include/linux/fs.h        |  6 +++---
 16 files changed, 87 insertions(+), 54 deletions(-)

diff --git a/drivers/base/devtmpfs.c b/drivers/base/devtmpfs.c
index 30d0523014e0..35488f7140a9 100644
--- a/drivers/base/devtmpfs.c
+++ b/drivers/base/devtmpfs.c
@@ -224,13 +224,17 @@ static int handle_create(const char *nodename, umode_t mode, kuid_t uid,
 	err = vfs_mknod(d_inode(path.dentry), dentry, mode, dev->devt);
 	if (!err) {
 		struct iattr newattrs;
+		struct path newpath = {
+			.mnt = path.mnt,
+			.dentry = dentry,
+		};
 
 		newattrs.ia_mode = mode;
 		newattrs.ia_uid = uid;
 		newattrs.ia_gid = gid;
 		newattrs.ia_valid = ATTR_MODE|ATTR_UID|ATTR_GID;
 		inode_lock(d_inode(dentry));
-		notify_change(dentry, &newattrs, NULL);
+		notify_change(&newpath, &newattrs, NULL);
 		inode_unlock(d_inode(dentry));
 
 		/* mark as kernel-created inode */
@@ -337,7 +341,7 @@ static int handle_remove(const char *nodename, struct device *dev)
 			newattrs.ia_valid =
 				ATTR_UID|ATTR_GID|ATTR_MODE;
 			inode_lock(d_inode(dentry));
-			notify_change(dentry, &newattrs, NULL);
+			notify_change(&p, &newattrs, NULL);
 			inode_unlock(d_inode(dentry));
 			err = vfs_unlink(d_inode(parent.dentry), dentry, NULL);
 			if (!err || err == -ENOENT)
diff --git a/fs/attr.c b/fs/attr.c
index df28035aa23e..370b18807f05 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -226,8 +226,10 @@ EXPORT_SYMBOL(setattr_copy);
  * the file open for write, as there can be no conflicting delegation in
  * that case.
  */
-int notify_change(struct dentry * dentry, struct iattr * attr, struct inode **delegated_inode)
+int notify_change(const struct path *path, struct iattr * attr,
+		  struct inode **delegated_inode)
 {
+	struct dentry *dentry = path->dentry;
 	struct inode *inode = dentry->d_inode;
 	umode_t mode = inode->i_mode;
 	int error;
diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c
index 4cea5fbf695e..f11216f59a56 100644
--- a/fs/cachefiles/interface.c
+++ b/fs/cachefiles/interface.c
@@ -436,6 +436,7 @@ static int cachefiles_attr_changed(struct fscache_object *_object)
 	uint64_t ni_size;
 	loff_t oi_size;
 	int ret;
+	struct path path;
 
 	ni_size = _object->store_limit_l;
 
@@ -466,18 +467,19 @@ static int cachefiles_attr_changed(struct fscache_object *_object)
 	/* if there's an extension to a partial page at the end of the backing
 	 * file, we need to discard the partial page so that we pick up new
 	 * data after it */
+	path = (struct path){ .mnt = cache->mnt, .dentry = object->backer };
 	if (oi_size & ~PAGE_MASK && ni_size > oi_size) {
 		_debug("discard tail %llx", oi_size);
 		newattrs.ia_valid = ATTR_SIZE;
 		newattrs.ia_size = oi_size & PAGE_MASK;
-		ret = notify_change(object->backer, &newattrs, NULL);
+		ret = notify_change(&path, &newattrs, NULL);
 		if (ret < 0)
 			goto truncate_failed;
 	}
 
 	newattrs.ia_valid = ATTR_SIZE;
 	newattrs.ia_size = ni_size;
-	ret = notify_change(object->backer, &newattrs, NULL);
+	ret = notify_change(&path, &newattrs, NULL);
 
 truncate_failed:
 	inode_unlock(d_inode(object->backer));
diff --git a/fs/coredump.c b/fs/coredump.c
index b1ea7dfbd149..69899bfb025a 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -775,7 +775,7 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 			goto close_fail;
 		if (!(cprm.file->f_mode & FMODE_CAN_WRITE))
 			goto close_fail;
-		if (do_truncate(cprm.file->f_path.dentry, 0, 0, cprm.file))
+		if (do_truncate(&cprm.file->f_path, 0, 0, cprm.file))
 			goto close_fail;
 	}
 
@@ -879,7 +879,7 @@ void dump_truncate(struct coredump_params *cprm)
 	if (file->f_op->llseek && file->f_op->llseek != no_llseek) {
 		offset = file->f_op->llseek(file, 0, SEEK_CUR);
 		if (i_size_read(file->f_mapping->host) < offset)
-			do_truncate(file->f_path.dentry, offset, 0, file);
+			do_truncate(&file->f_path, offset, 0, file);
 	}
 }
 EXPORT_SYMBOL(dump_truncate);
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index e23752d9a79f..3bc67c478163 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -852,10 +852,11 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
 
 	rc = truncate_upper(dentry, &ia, &lower_ia);
 	if (!rc && lower_ia.ia_valid & ATTR_SIZE) {
-		struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
+		struct path *lower_path = ecryptfs_dentry_to_lower_path(dentry);
+		struct dentry *lower_dentry = lower_path->dentry;
 
 		inode_lock(d_inode(lower_dentry));
-		rc = notify_change(lower_dentry, &lower_ia, NULL);
+		rc = notify_change(lower_path, &lower_ia, NULL);
 		inode_unlock(d_inode(lower_dentry));
 	}
 	return rc;
@@ -883,6 +884,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia)
 {
 	int rc = 0;
 	struct dentry *lower_dentry;
+	struct path *lower_path;
 	struct iattr lower_ia;
 	struct inode *inode;
 	struct inode *lower_inode;
@@ -897,6 +899,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia)
 	inode = d_inode(dentry);
 	lower_inode = ecryptfs_inode_to_lower(inode);
 	lower_dentry = ecryptfs_dentry_to_lower(dentry);
+	lower_path = ecryptfs_dentry_to_lower_path(dentry);
 	mutex_lock(&crypt_stat->cs_mutex);
 	if (d_is_dir(dentry))
 		crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
@@ -959,7 +962,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia)
 		lower_ia.ia_valid &= ~ATTR_MODE;
 
 	inode_lock(d_inode(lower_dentry));
-	rc = notify_change(lower_dentry, &lower_ia, NULL);
+	rc = notify_change(lower_path, &lower_ia, NULL);
 	inode_unlock(d_inode(lower_dentry));
 out:
 	fsstack_copy_attr_all(inode, lower_inode);
diff --git a/fs/inode.c b/fs/inode.c
index fef457a42882..f2cc96ebede4 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1810,7 +1810,7 @@ int dentry_needs_remove_privs(struct dentry *dentry)
 	return mask;
 }
 
-static int __remove_privs(struct dentry *dentry, int kill)
+static int __remove_privs(struct path *path, int kill)
 {
 	struct iattr newattrs;
 
@@ -1819,7 +1819,7 @@ static int __remove_privs(struct dentry *dentry, int kill)
 	 * Note we call this on write, so notify_change will not
 	 * encounter any conflicting delegations:
 	 */
-	return notify_change(dentry, &newattrs, NULL);
+	return notify_change(path, &newattrs, NULL);
 }
 
 /*
@@ -1828,6 +1828,7 @@ static int __remove_privs(struct dentry *dentry, int kill)
  */
 int file_remove_privs(struct file *file)
 {
+	struct path *path = &file->f_path;
 	struct dentry *dentry = file_dentry(file);
 	struct inode *inode = file_inode(file);
 	int kill;
@@ -1846,7 +1847,7 @@ int file_remove_privs(struct file *file)
 	if (kill < 0)
 		return kill;
 	if (kill)
-		error = __remove_privs(dentry, kill);
+		error = __remove_privs(path, kill);
 	if (!error)
 		inode_has_no_xattr(inode);
 
diff --git a/fs/namei.c b/fs/namei.c
index 671c3c1a3425..900c826161ef 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2995,7 +2995,7 @@ static int handle_truncate(struct file *filp)
 	if (!error)
 		error = security_path_truncate(path);
 	if (!error) {
-		error = do_truncate(path->dentry, 0,
+		error = do_truncate(path, 0,
 				    ATTR_MTIME|ATTR_CTIME|ATTR_OPEN,
 				    filp);
 	}
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index bd0a385df3fc..7d2553168890 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -360,8 +360,8 @@ __be32
 nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
 	     int check_guard, time_t guardtime)
 {
-	struct dentry	*dentry;
 	struct inode	*inode;
+	struct path	path;
 	int		accmode = NFSD_MAY_SATTR;
 	umode_t		ftype = 0;
 	__be32		err;
@@ -400,8 +400,11 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
 			goto out;
 	}
 
-	dentry = fhp->fh_dentry;
-	inode = d_inode(dentry);
+	path = (struct path) {
+		.mnt = fhp->fh_export->ex_path.mnt,
+		.dentry = fhp->fh_dentry,
+	};
+	inode = d_inode(path.dentry);
 
 	/* Ignore any mode updates on symlinks */
 	if (S_ISLNK(inode->i_mode))
@@ -442,7 +445,7 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
 			.ia_size	= iap->ia_size,
 		};
 
-		host_err = notify_change(dentry, &size_attr, NULL);
+		host_err = notify_change(&path, &size_attr, NULL);
 		if (host_err)
 			goto out_unlock;
 		iap->ia_valid &= ~ATTR_SIZE;
@@ -457,7 +460,7 @@ nfsd_setattr(struct svc_rqst *rqstp, struct svc_fh *fhp, struct iattr *iap,
 	}
 
 	iap->ia_valid |= ATTR_CTIME;
-	host_err = notify_change(dentry, iap, NULL);
+	host_err = notify_change(&path, iap, NULL);
 
 out_unlock:
 	fh_unlock(fhp);
diff --git a/fs/open.c b/fs/open.c
index b62f5c0923a8..033e2112fbda 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -35,11 +35,12 @@
 
 #include "internal.h"
 
-int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs,
+int do_truncate(const struct path *path, loff_t length, unsigned int time_attrs,
 	struct file *filp)
 {
 	int ret;
 	struct iattr newattrs;
+	struct dentry *dentry = path->dentry;
 
 	/* Not pretty: "inode->i_size" shouldn't really be signed. But it is. */
 	if (length < 0)
@@ -61,7 +62,7 @@ int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs,
 
 	inode_lock(dentry->d_inode);
 	/* Note any delegations or leases have already been broken: */
-	ret = notify_change(dentry, &newattrs, NULL);
+	ret = notify_change(path, &newattrs, NULL);
 	inode_unlock(dentry->d_inode);
 	return ret;
 }
@@ -107,7 +108,7 @@ long vfs_truncate(const struct path *path, loff_t length)
 	if (!error)
 		error = security_path_truncate(path);
 	if (!error)
-		error = do_truncate(path->dentry, length, 0, NULL);
+		error = do_truncate(path, length, 0, NULL);
 
 put_write_and_out:
 	put_write_access(inode);
@@ -155,7 +156,7 @@ COMPAT_SYSCALL_DEFINE2(truncate, const char __user *, path, compat_off_t, length
 long do_sys_ftruncate(unsigned int fd, loff_t length, int small)
 {
 	struct inode *inode;
-	struct dentry *dentry;
+	struct path *path;
 	struct fd f;
 	int error;
 
@@ -171,8 +172,8 @@ long do_sys_ftruncate(unsigned int fd, loff_t length, int small)
 	if (f.file->f_flags & O_LARGEFILE)
 		small = 0;
 
-	dentry = f.file->f_path.dentry;
-	inode = dentry->d_inode;
+	path = &f.file->f_path;
+	inode = path->dentry->d_inode;
 	error = -EINVAL;
 	if (!S_ISREG(inode->i_mode) || !(f.file->f_mode & FMODE_WRITE))
 		goto out_putf;
@@ -192,7 +193,7 @@ long do_sys_ftruncate(unsigned int fd, loff_t length, int small)
 	if (!error)
 		error = security_path_truncate(&f.file->f_path);
 	if (!error)
-		error = do_truncate(dentry, length, ATTR_MTIME|ATTR_CTIME, f.file);
+		error = do_truncate(path, length, ATTR_MTIME|ATTR_CTIME, f.file);
 	sb_end_write(inode->i_sb);
 out_putf:
 	fdput(f);
@@ -558,7 +559,7 @@ static int chmod_common(const struct path *path, umode_t mode)
 		goto out_unlock;
 	newattrs.ia_mode = (mode & S_IALLUGO) | (inode->i_mode & ~S_IALLUGO);
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
-	error = notify_change(path->dentry, &newattrs, &delegated_inode);
+	error = notify_change(path, &newattrs, &delegated_inode);
 out_unlock:
 	inode_unlock(inode);
 	if (delegated_inode) {
@@ -649,7 +650,7 @@ static int chown_common(const struct path *path, uid_t user, gid_t group)
 	inode_lock(inode);
 	error = security_path_chown(path, uid, gid);
 	if (!error)
-		error = notify_change(path->dentry, &newattrs, &delegated_inode);
+		error = notify_change(path, &newattrs, &delegated_inode);
 	inode_unlock(inode);
 	if (delegated_inode) {
 		error = break_deleg_wait(&delegated_inode);
diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index b801c6353100..032189ae6dde 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -177,17 +177,17 @@ static int ovl_copy_up_data(struct path *old, struct path *new, loff_t len)
 	return error;
 }
 
-static int ovl_set_size(struct dentry *upperdentry, struct kstat *stat)
+static int ovl_set_size(struct path *upperpath, struct kstat *stat)
 {
 	struct iattr attr = {
 		.ia_valid = ATTR_SIZE,
 		.ia_size = stat->size,
 	};
 
-	return notify_change(upperdentry, &attr, NULL);
+	return notify_change(upperpath, &attr, NULL);
 }
 
-static int ovl_set_timestamps(struct dentry *upperdentry, struct kstat *stat)
+static int ovl_set_timestamps(struct path *upperpath, struct kstat *stat)
 {
 	struct iattr attr = {
 		.ia_valid =
@@ -196,10 +196,10 @@ static int ovl_set_timestamps(struct dentry *upperdentry, struct kstat *stat)
 		.ia_mtime = stat->mtime,
 	};
 
-	return notify_change(upperdentry, &attr, NULL);
+	return notify_change(upperpath, &attr, NULL);
 }
 
-int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
+int ovl_set_attr(struct path *upperpath, struct kstat *stat)
 {
 	int err = 0;
 
@@ -208,7 +208,7 @@ int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
 			.ia_valid = ATTR_MODE,
 			.ia_mode = stat->mode,
 		};
-		err = notify_change(upperdentry, &attr, NULL);
+		err = notify_change(upperpath, &attr, NULL);
 	}
 	if (!err) {
 		struct iattr attr = {
@@ -216,10 +216,10 @@ int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
 			.ia_uid = stat->uid,
 			.ia_gid = stat->gid,
 		};
-		err = notify_change(upperdentry, &attr, NULL);
+		err = notify_change(upperpath, &attr, NULL);
 	}
 	if (!err)
-		ovl_set_timestamps(upperdentry, stat);
+		ovl_set_timestamps(upperpath, stat);
 
 	return err;
 }
@@ -401,8 +401,13 @@ static int ovl_link_up(struct ovl_copy_up_ctx *c)
 {
 	int err;
 	struct dentry *upper;
-	struct dentry *upperdir = ovl_dentry_upper(c->parent);
-	struct inode *udir = d_inode(upperdir);
+	struct dentry *upperdir;
+	struct path upperdirpath;
+	struct inode *udir;
+
+	ovl_path_upper(c->parent, &upperdirpath);
+	upperdir = upperdirpath.dentry;
+	udir = d_inode(upperdir);
 
 	/* Mark parent "impure" because it may now contain non-pure upper */
 	err = ovl_set_impure(c->parent, upperdir);
@@ -423,7 +428,7 @@ static int ovl_link_up(struct ovl_copy_up_ctx *c)
 
 		if (!err) {
 			/* Restore timestamps on parent (best effort) */
-			ovl_set_timestamps(upperdir, &c->pstat);
+			ovl_set_timestamps(&upperdirpath, &c->pstat);
 			ovl_dentry_set_upper_alias(c->dentry);
 		}
 	}
@@ -439,15 +444,16 @@ static int ovl_link_up(struct ovl_copy_up_ctx *c)
 static int ovl_copy_up_inode(struct ovl_copy_up_ctx *c, struct dentry *temp)
 {
 	int err;
+	struct path upperpath, temppath;
 
+	ovl_path_upper(c->dentry, &upperpath);
 	/*
 	 * Copy up data first and then xattrs. Writing data after
 	 * xattrs will remove security.capability xattr automatically.
 	 */
 	if (S_ISREG(c->stat.mode) && !c->metacopy) {
-		struct path upperpath, datapath;
+		struct path datapath;
 
-		ovl_path_upper(c->dentry, &upperpath);
 		if (WARN_ON(upperpath.dentry != NULL))
 			return -EIO;
 		upperpath.dentry = temp;
@@ -481,12 +487,13 @@ static int ovl_copy_up_inode(struct ovl_copy_up_ctx *c, struct dentry *temp)
 		if (err)
 			return err;
 	}
+	temppath = (struct path){ .mnt = upperpath.mnt, .dentry = temp };
 
 	inode_lock(temp->d_inode);
 	if (c->metacopy)
-		err = ovl_set_size(temp, &c->stat);
+		err = ovl_set_size(&temppath, &c->stat);
 	if (!err)
-		err = ovl_set_attr(temp, &c->stat);
+		err = ovl_set_attr(&temppath, &c->stat);
 	inode_unlock(temp->d_inode);
 
 	return err;
@@ -702,10 +709,11 @@ static int ovl_do_copy_up(struct ovl_copy_up_ctx *c)
 		err = ovl_set_nlink_upper(c->dentry);
 	} else {
 		struct inode *udir = d_inode(c->destdir);
+		struct path destpath = { .mnt = ofs->upper_mnt, .dentry = c->destdir };
 
 		/* Restore timestamps on parent (best effort) */
 		inode_lock(udir);
-		ovl_set_timestamps(c->destdir, &c->pstat);
+		ovl_set_timestamps(&destpath, &c->pstat);
 		inode_unlock(udir);
 
 		ovl_dentry_set_upper_alias(c->dentry);
diff --git a/fs/overlayfs/dir.c b/fs/overlayfs/dir.c
index 702aa63f6774..298b302a4258 100644
--- a/fs/overlayfs/dir.c
+++ b/fs/overlayfs/dir.c
@@ -374,7 +374,8 @@ static struct dentry *ovl_clear_empty(struct dentry *dentry,
 		goto out_cleanup;
 
 	inode_lock(opaquedir->d_inode);
-	err = ovl_set_attr(opaquedir, &stat);
+	err = ovl_set_attr(&(struct path) { .mnt = upperpath.mnt,
+					    .dentry = opaquedir }, &stat);
 	inode_unlock(opaquedir->d_inode);
 	if (err)
 		goto out_cleanup;
@@ -435,10 +436,13 @@ static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode,
 	struct inode *udir = upperdir->d_inode;
 	struct dentry *upper;
 	struct dentry *newdentry;
+	struct path newpath;
 	int err;
 	struct posix_acl *acl, *default_acl;
 	bool hardlink = !!cattr->hardlink;
 
+	ovl_path_upper(dentry, &newpath);
+
 	if (WARN_ON(!workdir))
 		return -EROFS;
 
@@ -478,8 +482,10 @@ static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode,
 			.ia_valid = ATTR_MODE,
 			.ia_mode = cattr->mode,
 		};
+
+		newpath.dentry = newdentry;
 		inode_lock(newdentry->d_inode);
-		err = notify_change(newdentry, &attr, NULL);
+		err = notify_change(&newpath, &attr, NULL);
 		inode_unlock(newdentry->d_inode);
 		if (err)
 			goto out_cleanup;
diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c
index bc14781886bf..456558e0a7d3 100644
--- a/fs/overlayfs/inode.c
+++ b/fs/overlayfs/inode.c
@@ -45,8 +45,10 @@ int ovl_setattr(struct dentry *dentry, struct iattr *attr)
 		err = ovl_copy_up_with_data(dentry);
 	if (!err) {
 		struct inode *winode = NULL;
+		struct path upperpath;
 
-		upperdentry = ovl_dentry_upper(dentry);
+		ovl_path_upper(dentry, &upperpath);
+		upperdentry = upperpath.dentry;
 
 		if (attr->ia_valid & ATTR_SIZE) {
 			winode = d_inode(upperdentry);
@@ -60,7 +62,7 @@ int ovl_setattr(struct dentry *dentry, struct iattr *attr)
 
 		inode_lock(upperdentry->d_inode);
 		old_cred = ovl_override_creds(dentry->d_sb);
-		err = notify_change(upperdentry, attr, NULL);
+		err = notify_change(&upperpath, attr, NULL);
 		revert_creds(old_cred);
 		if (!err)
 			ovl_copyattr(upperdentry->d_inode, dentry->d_inode);
diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
index 6934bcf030f0..a6c361d1d703 100644
--- a/fs/overlayfs/overlayfs.h
+++ b/fs/overlayfs/overlayfs.h
@@ -423,7 +423,7 @@ int ovl_copy_up_with_data(struct dentry *dentry);
 int ovl_copy_up_flags(struct dentry *dentry, int flags);
 int ovl_maybe_copy_up(struct dentry *dentry, int flags);
 int ovl_copy_xattr(struct dentry *old, struct dentry *new);
-int ovl_set_attr(struct dentry *upper, struct kstat *stat);
+int ovl_set_attr(struct path *upperpath, struct kstat *stat);
 struct ovl_fh *ovl_encode_real_fh(struct dentry *real, bool is_upper);
 int ovl_set_origin(struct dentry *dentry, struct dentry *lower,
 		   struct dentry *upper);
diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
index afbcb116a7f1..90ca233b8262 100644
--- a/fs/overlayfs/super.c
+++ b/fs/overlayfs/super.c
@@ -632,6 +632,7 @@ static struct dentry *ovl_workdir_create(struct ovl_fs *ofs,
 			.ia_valid = ATTR_MODE,
 			.ia_mode = S_IFDIR | 0,
 		};
+		const struct path workpath = { .mnt = mnt, .dentry = work };
 
 		if (work->d_inode) {
 			err = -EEXIST;
@@ -675,7 +676,7 @@ static struct dentry *ovl_workdir_create(struct ovl_fs *ofs,
 
 		/* Clear any inherited mode bits */
 		inode_lock(work->d_inode);
-		err = notify_change(work, &attr, NULL);
+		err = notify_change(&workpath, &attr, NULL);
 		inode_unlock(work->d_inode);
 		if (err)
 			goto out_dput;
diff --git a/fs/utimes.c b/fs/utimes.c
index 1ba3f7883870..87da3e974a75 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -57,7 +57,7 @@ static int utimes_common(const struct path *path, struct timespec64 *times)
 	}
 retry_deleg:
 	inode_lock(inode);
-	error = notify_change(path->dentry, &newattrs, &delegated_inode);
+	error = notify_change(path, &newattrs, &delegated_inode);
 	inode_unlock(inode);
 	if (delegated_inode) {
 		error = break_deleg_wait(&delegated_inode);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 51f1408180f5..96356b884de7 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2519,8 +2519,8 @@ struct filename {
 static_assert(offsetof(struct filename, iname) % sizeof(long) == 0);
 
 extern long vfs_truncate(const struct path *, loff_t);
-extern int do_truncate(struct dentry *, loff_t start, unsigned int time_attrs,
-		       struct file *filp);
+extern int do_truncate(const struct path *p, loff_t start,
+		       unsigned int time_attrs, struct file *filp);
 extern int vfs_fallocate(struct file *file, int mode, loff_t offset,
 			loff_t len);
 extern long do_sys_open(int dfd, const char __user *filename, int flags,
@@ -2867,7 +2867,7 @@ extern void emergency_remount(void);
 #ifdef CONFIG_BLOCK
 extern sector_t bmap(struct inode *, sector_t);
 #endif
-extern int notify_change(struct dentry *, struct iattr *, struct inode **);
+extern int notify_change(const struct path *, struct iattr *, struct inode **);
 extern int inode_permission(struct inode *, int);
 extern int generic_permission(struct inode *, int);
 extern int __check_sticky(struct inode *dir, struct inode *inode);
-- 
2.16.4

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [fs] 53d4a4300b: WARNING:at_fs/overlayfs/copy_up.c:#ovl_copy_up_inode[overlay]
  2019-11-30 21:21 ` [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry James Bottomley
  2019-12-01  7:04   ` Amir Goldstein
  2019-12-01 11:47   ` [PATCH 1/1] " Matthew Wilcox
@ 2019-12-03  9:18   ` kernel test robot
  2 siblings, 0 replies; 9+ messages in thread
From: kernel test robot @ 2019-12-03  9:18 UTC (permalink / raw)
  To: James Bottomley
  Cc: linux-fsdevel, dhowells, Al Viro, Miklos Szeredi, linux-unionfs,
	Seth Forshee, lkp, ltp

[-- Attachment #1: Type: text/plain, Size: 7252 bytes --]

FYI, we noticed the following commit (built with gcc-7):

commit: 53d4a4300b82c4156da46eab01a8dd4e65a46491 ("[PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry")
url: https://github.com/0day-ci/linux/commits/James-Bottomley/preparatory-patch-for-a-uid-gid-shifting-bind-mount/20191201-052453


in testcase: ltp
with following parameters:

	disk: 1HDD
	fs: btrfs
	test: syscalls_part2

test-description: The LTP testsuite contains a collection of tools for testing the Linux kernel and related features.
test-url: http://linux-test-project.github.io/


on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 8G

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+---------------------------------------------------------------+------------+------------+
|                                                               | a6ed68d646 | 53d4a4300b |
+---------------------------------------------------------------+------------+------------+
| boot_successes                                                | 42         | 5          |
| boot_failures                                                 | 0          | 8          |
| WARNING:at_fs/overlayfs/copy_up.c:#ovl_copy_up_inode[overlay] | 0          | 8          |
| RIP:ovl_copy_up_inode[overlay]                                | 0          | 8          |
+---------------------------------------------------------------+------------+------------+


If you fix the issue, kindly add following tag
Reported-by: kernel test robot <rong.a.chen@intel.com>


[  578.985285] WARNING: CPU: 0 PID: 5270 at fs/overlayfs/copy_up.c:455 ovl_copy_up_inode+0x16f/0x180 [overlay]
[  578.986017] ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
[  578.986019] 
[  578.988494] Modules linked in: overlay ext4 mbcache jbd2 tun xfs loop btrfs xor zstd_decompress zstd_compress raid6_pq libcrc32c dm_mod intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel bochs_drm drm_vram_helper drm_ttm_helper ttm sr_mod drm_kms_helper cdrom sg ata_generic pata_acpi syscopyarea sysfillrect ppdev sysimgblt fb_sys_fops drm snd_pcm aesni_intel crypto_simd snd_timer cryptd glue_helper snd soundcore pcspkr joydev ata_piix serio_raw libata i2c_piix4 parport_pc floppy parport ip_tables
[  578.992500] ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
[  578.992501] 
[  579.002619] CPU: 0 PID: 5270 Comm: inotify07 Not tainted 5.4.0-08748-g53d4a4300b82c #2
[  579.002619] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[  579.002625] RIP: 0010:ovl_copy_up_inode+0x16f/0x180 [overlay]
[  579.002627] Code: ff ff 85 c0 0f 84 4d ff ff ff eb a5 4c 8d 64 24 28 48 8b 73 58 4c 89 e7 e8 be f8 ff ff 85 c0 0f 85 74 ff ff ff e9 63 ff ff ff <0f> 0b b8 fb ff ff ff e9 7b ff ff ff e8 b0 f6 b5 ee 66 66 66 66 90
[  579.009864] ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
[  579.009866] 
[  579.010638] RSP: 0018:ffffab27c0327958 EFLAGS: 00010206
[  579.010639] RAX: 0000000000008000 RBX: ffffab27c0327a90 RCX: 00000000000081a4
[  579.010640] RDX: 000000000000001c RSI: ffffab27c0327960 RDI: ffff98f9d6812e40
[  579.010641] RBP: ffff98f9ecb92600 R08: 0000000000000000 R09: 0000000100043f23
[  579.010641] R10: ffffab27c0327860 R11: ffff98f9d55b4000 R12: ffffab27c0327a90
[  579.010642] R13: ffff98f9c648f6c0 R14: 00000000ecb92600 R15: 0000000000000000
[  579.010643] FS:  00007fe8e8403500(0000) GS:ffff98fa7fc00000(0000) knlGS:0000000000000000
[  579.015105] ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
[  579.015106] 
[  579.018993] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  579.018994] CR2: 0000558a8a903840 CR3: 0000000195090000 CR4: 00000000000406f0
[  579.018997] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  579.018998] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  579.018999] Call Trace:
[  579.023287] ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
[  579.023289] 
[  579.024174]  ovl_copy_up_one+0x80c/0xf40 [overlay]
[  579.024178]  ? __d_lookup_done+0x7e/0x100
[  579.027460] ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty59
[  579.027462] 
[  579.028091]  ? ext4_xattr_get+0x95/0x2d0 [ext4]
[  579.030043] 
[  579.031918]  ovl_copy_up_flags+0xac/0xf0 [overlay]
[  579.031921]  ? ovl_llseek+0x110/0x110 [overlay]
[  579.035137] ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty6
[  579.035139] 
[  579.035850]  ovl_maybe_copy_up+0x79/0xa0 [overlay]
[  579.035853]  ovl_open+0x25/0x80 [overlay]
[  579.035857]  do_dentry_open+0x1ce/0x380
[  579.040211] ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
[  579.040212] 
[  579.040979]  path_openat+0x2e5/0x1550
[  579.044772] ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
[  579.044774] 
[  579.044837]  do_filp_open+0x9b/0x110
[  579.049101] ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
[  579.049103] 
[  579.050042]  ? __check_object_size+0xd4/0x1a0
[  579.050045]  ? do_sys_open+0x1bd/0x250
[  579.053467] ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
[  579.053469] 
[  579.054093]  do_sys_open+0x1bd/0x250
[  579.057723] ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
[  579.057725] 
[  579.058355]  do_syscall_64+0x5b/0x1f0
[  579.058358]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  579.060704] ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty6
[  579.060707] 
[  579.060889] RIP: 0033:0x7fe8e7f246f0
[  579.062386] 
[  579.064109] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 83 3d 19 30 2c 00 00 75 10 b8 02 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe 9d 01 00 48 89 04 24
[  579.064110] RSP: 002b:00007ffc1f798318 EFLAGS: 00000246 ORIG_RAX: 0000000000000002
[  579.064112] RAX: ffffffffffffffda RBX: 0000558a8a6f0f40 RCX: 00007fe8e7f246f0
[  579.064112] RDX: 00000000000001b6 RSI: 0000000000000041 RDI: 0000558a8a6f0f40
[  579.064113] RBP: 0000558a8a6f1135 R08: 00000000000001a4 R09: 0000000000000000
[  579.064113] R10: 0000000000000075 R11: 0000000000000246 R12: 000000000000004e
[  579.064115] R13: 00000000000001a4 R14: 0000000000000000 R15: 0000000000000000
[  579.066448] ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty60
[  579.066450] 
[  579.066610] ---[ end trace 1eae0e213285ea20 ]---


To reproduce:

        # build kernel
	cd linux
	cp config-5.4.0-08748-g53d4a4300b82c .config
	make HOSTCC=gcc-7 CC=gcc-7 ARCH=x86_64 olddefconfig prepare modules_prepare bzImage modules
	make HOSTCC=gcc-7 CC=gcc-7 ARCH=x86_64 INSTALL_MOD_PATH=<mod-install-dir> modules_install
	cd <mod-install-dir>
	find lib/ | cpio -o -H newc --quiet | gzip > modules.cgz


        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> -m modules.cgz job-script # job-script is attached in this email



Thanks,
Rong Chen


[-- Attachment #2: config-5.4.0-08748-g53d4a4300b82c --]
[-- Type: text/plain, Size: 202028 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.4.0 Kernel Configuration
#

#
# Compiler: gcc-7 (Debian 7.5.0-1) 7.5.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70500
CONFIG_CLANG_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_HEADER_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DYNAMIC_PHYSICAL_MASK=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
CONFIG_X86_CPU_RESCTRL=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_AMD_PLATFORM_DEVICE=y
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_XXL=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
CONFIG_XEN=y
CONFIG_XEN_PV=y
CONFIG_XEN_PV_SMP=y
# CONFIG_XEN_DOM0 is not set
CONFIG_XEN_PVHVM=y
CONFIG_XEN_PVHVM_SMP=y
CONFIG_XEN_512GB=y
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
# CONFIG_XEN_PVH is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_AMD_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MPX=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features

CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_TAD is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
CONFIG_ACPI_CUSTOM_METHOD=m
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
CONFIG_ACPI_APEI_ERST_DEBUG=y
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle

CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_MMCONF_FAM10H=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_X86_SYSFB is not set
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations

CONFIG_X86_DEV_DMA_OPS=y

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# end of EFI (Extensible Firmware Interface) Support

CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_EFI_EARLYCON=y

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_AMD_SEV=y
CONFIG_KVM_MMU_AUDIT=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_64BIT_TIME=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_PLUGIN_HOSTCC="g++"
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y

#
# GCC plugins
#
# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
# end of GCC plugins
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_DEBUG_FS_ZONED=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
# CONFIG_DEVICE_PRIVATE is not set
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# end of Memory Management options

CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
CONFIG_NET_FOU=m
CONFIG_NET_FOU_IP_TUNNELS=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_FOU=m
CONFIG_IPV6_FOU_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
# CONFIG_IPV6_SEG6_HMAC is not set
CONFIG_IPV6_SEG6_BPF=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_ACCT=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_COMMON=m
# CONFIG_NF_LOG_NETDEV is not set
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
# CONFIG_NF_TABLES_SET is not set
# CONFIG_NF_TABLES_INET is not set
# CONFIG_NF_TABLES_NETDEV is not set
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_CT=m
CONFIG_NFT_COUNTER=m
# CONFIG_NFT_CONNLIMIT is not set
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
# CONFIG_NFT_TUNNEL is not set
# CONFIG_NFT_OBJREF is not set
CONFIG_NFT_QUEUE=m
# CONFIG_NFT_QUOTA is not set
CONFIG_NFT_REJECT=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
# CONFIG_NFT_XFRM is not set
# CONFIG_NFT_SOCKET is not set
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_LED=m
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_L2TP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_NFACCT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# end of Core Netfilter Configuration

CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
# CONFIG_NF_TABLES_IPV4 is not set
# CONFIG_NF_TABLES_ARP is not set
CONFIG_NF_DUP_IPV4=m
# CONFIG_NF_LOG_ARP is not set
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
# CONFIG_NF_TABLES_IPV6 is not set
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration

CONFIG_NF_DEFRAG_IPV6=m
# CONFIG_NF_TABLES_BRIDGE is not set
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking

CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
CONFIG_6LOWPAN_NHC=m
CONFIG_6LOWPAN_NHC_DEST=m
CONFIG_6LOWPAN_NHC_FRAGMENT=m
CONFIG_6LOWPAN_NHC_HOP=m
CONFIG_6LOWPAN_NHC_IPV6=m
CONFIG_6LOWPAN_NHC_MOBILITY=m
CONFIG_6LOWPAN_NHC_ROUTING=m
CONFIG_6LOWPAN_NHC_UDP=m
# CONFIG_6LOWPAN_GHC_EXT_HDR_HOP is not set
# CONFIG_6LOWPAN_GHC_UDP is not set
# CONFIG_6LOWPAN_GHC_ICMPV6 is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_DEST is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG is not set
# CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=m
# CONFIG_NET_ACT_BPF is not set
CONFIG_NET_ACT_CONNMARK=m
# CONFIG_NET_ACT_CTINFO is not set
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_CT is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_OPENVSWITCH_GENEVE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set

#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m

#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# end of CAN SPI interfaces

#
# CAN USB interfaces
#
CONFIG_CAN_8DEV_USB=m
CONFIG_CAN_EMS_USB=m
CONFIG_CAN_ESD_USB2=m
# CONFIG_CAN_GS_USB is not set
CONFIG_CAN_KVASER_USB=m
# CONFIG_CAN_MCBA_USB is not set
CONFIG_CAN_PEAK_USB=m
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces

# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers

CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_DEBUGFS=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
CONFIG_BT_HCIBTUSB_BCM=y
# CONFIG_BT_HCIBTUSB_MTK is not set
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_MTKSDIO is not set
# end of Bluetooth device drivers

# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_XEN is not set
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_NET_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_FAILOVER=m
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_BW is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
# CONFIG_PCI_PF_STUB is not set
# CONFIG_XEN_PCIDEV_FRONTEND is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y

#
# PCI controller drivers
#

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support

CONFIG_VMD=y
CONFIG_PCI_HYPERV_INTERFACE=m

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# end of Bus devices

CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set

#
# Partition parsers
#
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# end of Partition parsers

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
# CONFIG_MTD_SWAP is not set
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# end of RAM/ROM/Flash chip drivers

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# end of Mapping drivers for chip access

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_MCHP23K256 is not set
# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
# end of Self-contained MTD device drivers

# CONFIG_MTD_ONENAND is not set
# CONFIG_MTD_RAW_NAND is not set
# CONFIG_MTD_SPI_NAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
# end of LPDDR & LPDDR2 PCM memory drivers

# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_MTD_HYPERBUS is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION=y
CONFIG_BLK_DEV_FD=m
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
# CONFIG_ZRAM is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SKD is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=m
CONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=m
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_PVPANIC=y
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC & related support
#
# CONFIG_INTEL_MIC_BUS is not set
# CONFIG_SCIF_BUS is not set
# CONFIG_VOP_BUS is not set
# end of Intel MIC & related support

# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# end of Misc devices

CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_SCSI_BNX2X_FCOE=m
CONFIG_BE2ISCSI=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_HPSA=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_3W_SAS=m
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=m
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_MVSAS_TASKLET=y
CONFIG_SCSI_MVUMI=m
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS=m
# CONFIG_SCSI_SMARTPQI is not set
CONFIG_SCSI_UFSHCD=m
CONFIG_SCSI_UFSHCD_PCI=m
# CONFIG_SCSI_UFS_DWC_TC_PCI is not set
# CONFIG_SCSI_UFSHCD_PLATFORM is not set
# CONFIG_SCSI_UFS_BSG is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
CONFIG_VMWARE_PVSCSI=m
# CONFIG_XEN_SCSI_FRONTEND is not set
CONFIG_HYPERV_STORAGE=m
CONFIG_LIBFC=m
CONFIG_LIBFCOE=m
CONFIG_FCOE=m
CONFIG_FCOE_FNIC=m
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_STEX=m
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA_FC=m
CONFIG_TCM_QLA2XXX=m
# CONFIG_TCM_QLA2XXX_DEBUG is not set
CONFIG_SCSI_QLA_ISCSI=m
# CONFIG_QEDI is not set
# CONFIG_QEDF is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_PMCRAID=m
CONFIG_SCSI_PM8001=m
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support

CONFIG_ATA=m
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
CONFIG_PATA_HPT3X2N=m
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
CONFIG_PATA_ACPI=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
# CONFIG_DM_INTEGRITY is not set
# CONFIG_DM_ZONED is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_TCM_FC=m
CONFIG_ISCSI_TARGET=m
CONFIG_ISCSI_TARGET_CXGB4=m
# CONFIG_SBP_TARGET is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
CONFIG_NET_FC=y
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
CONFIG_GENEVE=m
# CONFIG_GTP is not set
CONFIG_MACSEC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_NTB_NETDEV=m
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
CONFIG_NET_VRF=y
CONFIG_VSOCKMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# Distributed Switch Architecture drivers
#
# end of Distributed Switch Architecture drivers

CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_ENA_ETHERNET=m
CONFIG_NET_VENDOR_AMD=y
CONFIG_AMD8111_ETH=m
CONFIG_PCNET32=m
CONFIG_AMD_XGBE=m
# CONFIG_AMD_XGBE_DCB is not set
CONFIG_AMD_XGBE_HAVE_ECC=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_AQTION=m
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
CONFIG_ATL2=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
CONFIG_ATL1C=m
CONFIG_ALX=m
CONFIG_NET_VENDOR_AURORA=y
# CONFIG_AURORA_NB8800 is not set
CONFIG_NET_VENDOR_BROADCOM=y
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_BCMGENET is not set
CONFIG_BNX2=m
CONFIG_CNIC=m
CONFIG_TIGON3=y
CONFIG_TIGON3_HWMON=y
CONFIG_BNX2X=m
CONFIG_BNX2X_SRIOV=y
# CONFIG_SYSTEMPORT is not set
CONFIG_BNXT=m
CONFIG_BNXT_SRIOV=y
CONFIG_BNXT_FLOWER_OFFLOAD=y
CONFIG_BNXT_DCB=y
CONFIG_BNXT_HWMON=y
CONFIG_NET_VENDOR_BROCADE=y
CONFIG_BNA=m
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=m
CONFIG_MACB_USE_HWSTAMP=y
# CONFIG_MACB_PCI is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
CONFIG_LIQUIDIO=m
CONFIG_LIQUIDIO_VF=m
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
CONFIG_CHELSIO_T4=m
# CONFIG_CHELSIO_T4_DCB is not set
CONFIG_CHELSIO_T4VF=m
CONFIG_CHELSIO_LIB=m
CONFIG_NET_VENDOR_CISCO=y
CONFIG_ENIC=m
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
CONFIG_DNET=m
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_DE2104X_DSL=0
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_NET_VENDOR_DLINK is not set
CONFIG_NET_VENDOR_EMULEX=y
CONFIG_BE2NET=m
CONFIG_BE2NET_HWMON=y
CONFIG_BE2NET_BE2=y
CONFIG_BE2NET_BE3=y
CONFIG_BE2NET_LANCER=y
CONFIG_BE2NET_SKYHAWK=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
# CONFIG_NET_VENDOR_I825XX is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
CONFIG_IGBVF=m
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
CONFIG_IXGBE_DCB=y
CONFIG_IXGBEVF=m
CONFIG_I40E=y
CONFIG_I40E_DCB=y
CONFIG_IAVF=m
CONFIG_I40EVF=m
# CONFIG_ICE is not set
CONFIG_FM10K=m
# CONFIG_IGC is not set
CONFIG_JME=m
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_MVMDIO=m
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKGE_GENESIS=y
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_EN_DCB=y
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_MSCC_OCELOT_SWITCH is not set
CONFIG_NET_VENDOR_MYRI=y
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NFP=m
CONFIG_NFP_APP_FLOWER=y
CONFIG_NFP_APP_ABM_NIC=y
# CONFIG_NFP_DEBUG is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
CONFIG_NET_VENDOR_OKI=y
CONFIG_ETHOC=m
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
CONFIG_YELLOWFIN=m
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
CONFIG_QLA3XXX=m
CONFIG_QLCNIC=m
CONFIG_QLCNIC_SRIOV=y
CONFIG_QLCNIC_DCB=y
CONFIG_QLCNIC_HWMON=y
CONFIG_NETXEN_NIC=m
CONFIG_QED=m
CONFIG_QED_SRIOV=y
CONFIG_QEDE=m
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_ROCKER=m
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_SFC=m
CONFIG_SFC_MTD=y
CONFIG_SFC_MCDI_MON=y
CONFIG_SFC_SRIOV=y
CONFIG_SFC_MCDI_LOGGING=y
CONFIG_SFC_FALCON=m
CONFIG_SFC_FALCON_MTD=y
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
CONFIG_NET_VENDOR_SMSC=y
CONFIG_EPIC100=m
# CONFIG_SMSC911X is not set
CONFIG_SMSC9420=m
CONFIG_NET_VENDOR_SOCIONEXT=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
CONFIG_TLAN=m
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
# CONFIG_MDIO_BCM_UNIMAC is not set
CONFIG_MDIO_BITBANG=m
# CONFIG_MDIO_GPIO is not set
# CONFIG_MDIO_MSCC_MIIM is not set
# CONFIG_MDIO_THUNDER is not set
CONFIG_PHYLINK=m
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
# CONFIG_SFP is not set
# CONFIG_ADIN_PHY is not set
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_AX88796B_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
CONFIG_FIXED_PHY=y
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
# CONFIG_MARVELL_10G_PHY is not set
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
# CONFIG_NXP_TJA11XX_PHY is not set
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_USB_NET_DRIVERS=y
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=y
CONFIG_USB_NET_CDC_EEM=y
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
CONFIG_USB_NET_SMSC75XX=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET_ENABLE=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=y
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
# CONFIG_ATH9K is not set
CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLEGACY=m
CONFIG_IWL4965=m
CONFIG_IWL3945=m

#
# iwl3945 / iwl4965 Debugging Options
#
CONFIG_IWLEGACY_DEBUG=y
CONFIG_IWLEGACY_DEBUGFS=y
# end of iwl3945 / iwl4965 Debugging Options

CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLDVM=m
CONFIG_IWLMVM=m
CONFIG_IWLWIFI_OPMODE_MODULAR=y
# CONFIG_IWLWIFI_BCAST_FILTERING is not set

#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# end of Debugging Options

CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT7601U is not set
# CONFIG_MT76x0U is not set
# CONFIG_MT76x0E is not set
# CONFIG_MT76x2E is not set
# CONFIG_MT76x2U is not set
# CONFIG_MT7603E is not set
# CONFIG_MT7615E is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_RTL_CARDS is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
CONFIG_MAC80211_HWSIM=m
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
# CONFIG_LANMEDIA is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
# CONFIG_HDLC_RAW_ETH is not set
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m

#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
# CONFIG_PC300TOO is not set
# CONFIG_FARSYNC is not set
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_IEEE802154_FAKELB=m
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_VMXNET3=m
CONFIG_FUJITSU_ES=m
CONFIG_THUNDERBOLT_NET=m
CONFIG_HYPERV_NET=m
CONFIG_NETDEVSIM=m
CONFIG_NET_FAILOVER=m
CONFIG_ISDN=y
CONFIG_ISDN_CAPI=m
# CONFIG_CAPI_TRACE is not set
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_MISDN=m
CONFIG_MISDN_DSP=m
CONFIG_MISDN_L1OIP=m

#
# mISDN hardware drivers
#
CONFIG_MISDN_HFCPCI=m
CONFIG_MISDN_HFCMULTI=m
CONFIG_MISDN_HFCUSB=m
CONFIG_MISDN_AVMFRITZ=m
CONFIG_MISDN_SPEEDFAX=m
CONFIG_MISDN_INFINEON=m
CONFIG_MISDN_W6692=m
CONFIG_MISDN_NETJET=m
CONFIG_MISDN_HDLC=m
CONFIG_MISDN_IPAC=m
CONFIG_MISDN_ISAR=m
CONFIG_NVM=y
# CONFIG_NVM_PBLK is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADC is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
# CONFIG_TABLET_USB_HANWANG is not set
CONFIG_TABLET_USB_KBTAB=m
# CONFIG_TABLET_USB_PEGASUS is not set
# CONFIG_TABLET_SERIAL_WACOM4 is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_PROPERTIES=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ADC is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
# CONFIG_TOUCHSCREEN_BU21013 is not set
# CONFIG_TOUCHSCREEN_BU21029 is not set
# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
# CONFIG_TOUCHSCREEN_EXC3000 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_HIDEEP is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
# CONFIG_TOUCHSCREEN_S6SY761 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_EKTF2127 is not set
# CONFIG_TOUCHSCREEN_ELAN is not set
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_WACOM_W8001=m
CONFIG_TOUCHSCREEN_WACOM_I2C=m
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_PIXCIR is not set
# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
# CONFIG_TOUCHSCREEN_TSC2004 is not set
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_RM_TS is not set
# CONFIG_TOUCHSCREEN_SILEAD is not set
# CONFIG_TOUCHSCREEN_SIS_I2C is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
# CONFIG_TOUCHSCREEN_STMFTS is not set
# CONFIG_TOUCHSCREEN_SUR40 is not set
# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
# CONFIG_TOUCHSCREEN_SX8654 is not set
# CONFIG_TOUCHSCREEN_TPS6507X is not set
# CONFIG_TOUCHSCREEN_ZET6223 is not set
# CONFIG_TOUCHSCREEN_ZFORCE is not set
# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
# CONFIG_TOUCHSCREEN_IQS5XX is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MSM_VIBRATOR is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_APANEL=m
CONFIG_INPUT_GP2A=m
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_GPIO_VIBRA is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
CONFIG_RMI4_CORE=m
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F54 is not set
# CONFIG_RMI4_F55 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
# CONFIG_ISI is not set
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
# CONFIG_NULL_TTY is not set
CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# end of Serial drivers

CONFIG_SERIAL_MCTRL_GPIO=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_HVC_XEN_FRONTEND=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_XEN is not set
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# end of Character devices

# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
# end of Multiplexer I2C Chip support

CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIPERBOARD=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# end of I2C Hardware Bus support

CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_DP83640_PHY=m
CONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
CONFIG_PINCTRL_INTEL=m
# CONFIG_PINCTRL_BROXTON is not set
CONFIG_PINCTRL_CANNONLAKE=m
# CONFIG_PINCTRL_CEDARFORK is not set
CONFIG_PINCTRL_DENVERTON=m
CONFIG_PINCTRL_GEMINILAKE=m
# CONFIG_PINCTRL_ICELAKE is not set
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_SUNRISEPOINT=m
# CONFIG_PINCTRL_TIGERLAKE is not set
# CONFIG_PINCTRL_EQUILIBRIUM is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=m

#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_LYNXPOINT is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_XILINX is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders

#
# USB GPIO expanders
#
CONFIG_GPIO_VIPERBOARD=m
# end of USB GPIO expanders

CONFIG_GPIO_MOCKUP=y
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
CONFIG_CHARGER_SMB347=m
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
CONFIG_INTEL_SOC_DTS_IOSF_CORE=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
# CONFIG_INT3406_THERMAL is not set
CONFIG_PROC_THERMAL_MMIO_RAPL=y
# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# end of Intel thermal drivers

# CONFIG_GENERIC_ADC_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_XEN_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_SSB_DRIVER_GPIO=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_VIPERBOARD=m
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_MCE_KBD_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_IR_IMON_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_RC_DEVICES=y
CONFIG_RC_ATI_REMOTE=m
CONFIG_IR_ENE=m
CONFIG_IR_IMON=m
# CONFIG_IR_IMON_RAW is not set
CONFIG_IR_MCEUSB=m
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
CONFIG_IR_REDRAT3=m
CONFIG_IR_STREAMZAP=m
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
CONFIG_IR_IGUANA=m
CONFIG_IR_TTUSBIR=m
CONFIG_RC_LOOPBACK=m
# CONFIG_IR_SERIAL is not set
# CONFIG_IR_SIR is not set
# CONFIG_RC_XBOX_DVD is not set
CONFIG_MEDIA_SUPPORT=m

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
CONFIG_MEDIA_CONTROLLER=y
CONFIG_MEDIA_CONTROLLER_DVB=y
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L2_SUBDEV_API is not set
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_DVB_CORE=m
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
# CONFIG_USB_GSPCA_DTCS033 is not set
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_JL2005BCD=m
# CONFIG_USB_GSPCA_KINECT is not set
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_NW80X=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SPCA1528=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_SQ930X=m
CONFIG_USB_GSPCA_STK014=m
# CONFIG_USB_GSPCA_STK1135 is not set
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TOPRO=m
# CONFIG_USB_GSPCA_TOUPTEK is not set
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_VICAM=m
CONFIG_USB_GSPCA_XIRLINK_CIT=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_VIDEO_USBTV is not set

#
# Analog TV USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_HDPVR=m
CONFIG_VIDEO_USBVISION=m
# CONFIG_VIDEO_STK1160_COMMON is not set
# CONFIG_VIDEO_GO7007 is not set

#
# Analog/digital TV USB devices
#
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_AU0828_V4L2=y
# CONFIG_VIDEO_AU0828_RC is not set
CONFIG_VIDEO_CX231XX=m
CONFIG_VIDEO_CX231XX_RC=y
CONFIG_VIDEO_CX231XX_ALSA=m
CONFIG_VIDEO_CX231XX_DVB=m
CONFIG_VIDEO_TM6000=m
CONFIG_VIDEO_TM6000_ALSA=m
CONFIG_VIDEO_TM6000_DVB=m

#
# Digital TV USB devices
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_DIB3000MC=m
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
# CONFIG_DVB_USB_CXUSB_ANALOG is not set
CONFIG_DVB_USB_M920X=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_USB_OPERA1=m
CONFIG_DVB_USB_AF9005=m
CONFIG_DVB_USB_AF9005_REMOTE=m
CONFIG_DVB_USB_PCTV452E=m
CONFIG_DVB_USB_DW2102=m
CONFIG_DVB_USB_CINERGY_T2=m
CONFIG_DVB_USB_DTV5100=m
CONFIG_DVB_USB_AZ6027=m
CONFIG_DVB_USB_TECHNISAT_USB2=m
CONFIG_DVB_USB_V2=m
CONFIG_DVB_USB_AF9015=m
CONFIG_DVB_USB_AF9035=m
CONFIG_DVB_USB_ANYSEE=m
CONFIG_DVB_USB_AU6610=m
CONFIG_DVB_USB_AZ6007=m
CONFIG_DVB_USB_CE6230=m
CONFIG_DVB_USB_EC168=m
CONFIG_DVB_USB_GL861=m
CONFIG_DVB_USB_LME2510=m
CONFIG_DVB_USB_MXL111SF=m
CONFIG_DVB_USB_RTL28XXU=m
# CONFIG_DVB_USB_DVBSKY is not set
# CONFIG_DVB_USB_ZD1301 is not set
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_SMS_USB_DRV=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
# CONFIG_DVB_AS102 is not set

#
# Webcam, TV (analog/digital) USB devices
#
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_V4L2 is not set
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_EM28XX_RC=m
CONFIG_MEDIA_PCI_SUPPORT=y

#
# Media capture support
#
# CONFIG_VIDEO_MEYE is not set
# CONFIG_VIDEO_SOLO6X10 is not set
# CONFIG_VIDEO_TW5864 is not set
# CONFIG_VIDEO_TW68 is not set
# CONFIG_VIDEO_TW686X is not set

#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set
# CONFIG_VIDEO_IVTV_ALSA is not set
CONFIG_VIDEO_FB_IVTV=m
# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DT3155 is not set

#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CX18_ALSA=m
CONFIG_VIDEO_CX23885=m
CONFIG_MEDIA_ALTERA_CI=m
# CONFIG_VIDEO_CX25821 is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_ENABLE_VP3054=y
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88_MPEG=m
CONFIG_VIDEO_BT848=m
CONFIG_DVB_BT8XX=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_RC=y
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_SAA7164=m

#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110_IR=y
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set
CONFIG_DVB_PLUTO2=m
CONFIG_DVB_DM1105=m
CONFIG_DVB_PT1=m
# CONFIG_DVB_PT3 is not set
CONFIG_MANTIS_CORE=m
CONFIG_DVB_MANTIS=m
CONFIG_DVB_HOPPER=m
CONFIG_DVB_NGENE=m
CONFIG_DVB_DDBRIDGE=m
# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set
# CONFIG_DVB_SMIPCIE is not set
# CONFIG_DVB_NETUP_UNIDVB is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
CONFIG_SMS_SDIO_DRV=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_TEA575X=m
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set

#
# Texas Instruments WL128x FM driver (ST based)
#
# end of Texas Instruments WL128x FM driver (ST based)

#
# Supported FireWire (IEEE 1394) Adapters
#
CONFIG_DVB_FIREDTV=m
CONFIG_DVB_FIREDTV_INPUT=y
CONFIG_MEDIA_COMMON_OPTIONS=y

#
# common driver options
#
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_CYPRESS_FIRMWARE=m
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_VIDEOBUF2_DMA_SG=m
CONFIG_VIDEOBUF2_DVB=m
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_SMS_SIANO_MDTV=m
CONFIG_SMS_SIANO_RC=y
# CONFIG_SMS_SIANO_DEBUGFS is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m

#
# I2C Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS3308=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
# CONFIG_VIDEO_SONY_BTF_MPX is not set

#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=m

#
# Video decoders
#
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
CONFIG_VIDEO_SAA711X=m
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_CX25840=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set

#
# Camera sensor devices
#
# CONFIG_VIDEO_OV2640 is not set
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_RJ54N1 is not set

#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set

#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m

#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=m

#
# SDR tuner chips
#

#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
CONFIG_VIDEO_M52790=m
# CONFIG_VIDEO_I2C is not set
# end of I2C Encoders, decoders, sensors and other helper chips

#
# SPI helper chips
#
# end of SPI helper chips

#
# Media SPI Adapters
#
# CONFIG_CXD2880_SPI_DRV is not set
# end of Media SPI Adapters

CONFIG_MEDIA_TUNER=m

#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
# CONFIG_MEDIA_TUNER_MSI001 is not set
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
# CONFIG_MEDIA_TUNER_MXL301RF is not set
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners

#
# Customise DVB Frontends
#

#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m

#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
# CONFIG_DVB_S5H1432 is not set
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
# CONFIG_DVB_DIB9000 is not set
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_SI2168=m
# CONFIG_DVB_ZD1301_DEMOD is not set
CONFIG_DVB_GP8PSK_FE=m
# CONFIG_DVB_CXD2880 is not set

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m

#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m

#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
# CONFIG_DVB_MN88443X is not set

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m

#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
# CONFIG_DVB_LNBH29 is not set
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
# CONFIG_DVB_HORUS3A is not set
# CONFIG_DVB_ASCOT2E is not set
# CONFIG_DVB_HELENE is not set

#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
# CONFIG_DVB_SP2 is not set

#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=m
# end of Customise DVB Frontends

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DEBUG_SELFTEST=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_TTM_DMA_PAGE_POOL=y
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=y

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# end of ACP (Audio CoProcessor) Configuration

# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
CONFIG_DRM_I915_GVT_KVMGT=m

#
# drm/i915 Debugging
#
# CONFIG_DRM_I915_WERROR is not set
# CONFIG_DRM_I915_DEBUG is not set
# CONFIG_DRM_I915_DEBUG_MMIO is not set
# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
# CONFIG_DRM_I915_DEBUG_GUC is not set
# CONFIG_DRM_I915_SELFTEST is not set
# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set
# end of drm/i915 Debugging

#
# drm/i915 Profile Guided Optimisation
#
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=100
CONFIG_DRM_I915_SPIN_REQUEST=5
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# end of drm/i915 Profile Guided Optimisation

CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
CONFIG_DRM_VMWGFX=m
CONFIG_DRM_VMWGFX_FBCON=y
CONFIG_DRM_GMA500=m
CONFIG_DRM_GMA600=y
CONFIG_DRM_GMA3600=y
CONFIG_DRM_UDL=m
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_CIRRUS_QEMU=m
CONFIG_DRM_QXL=m
CONFIG_DRM_BOCHS=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_XEN is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_LIB_RANDOM=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support

CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_ELD=y
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
# CONFIG_SND_CS4281 is not set
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_ES1968_RADIO=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
CONFIG_SND_LX6464ES=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
CONFIG_SND_MIXART=m
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=m
# CONFIG_SND_RIPTIDE is not set
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=0
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# end of HD-Audio

CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_EXT_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=512
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
# CONFIG_SND_SPI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
CONFIG_SND_USB_HIFACE=m
CONFIG_SND_BCD2000=m
CONFIG_SND_USB_LINE6=m
CONFIG_SND_USB_POD=m
CONFIG_SND_USB_PODHD=m
CONFIG_SND_USB_TONEPORT=m
CONFIG_SND_USB_VARIAX=m
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_TOPOLOGY=y
CONFIG_SND_SOC_ACPI=m
# CONFIG_SND_SOC_AMD_ACP is not set
# CONFIG_SND_SOC_AMD_ACP3x is not set
# CONFIG_SND_ATMEL_SOC is not set
# CONFIG_SND_DESIGNWARE_I2S is not set

#
# SoC Audio for Freescale CPUs
#

#
# Common SoC Audio options for Freescale CPUs:
#
# CONFIG_SND_SOC_FSL_ASRC is not set
# CONFIG_SND_SOC_FSL_SAI is not set
# CONFIG_SND_SOC_FSL_AUDMIX is not set
# CONFIG_SND_SOC_FSL_SSI is not set
# CONFIG_SND_SOC_FSL_SPDIF is not set
# CONFIG_SND_SOC_FSL_ESAI is not set
# CONFIG_SND_SOC_FSL_MICFIL is not set
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# end of SoC Audio for Freescale CPUs

# CONFIG_SND_I2S_HI6210_I2S is not set
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SST_IPC=m
CONFIG_SND_SST_IPC_ACPI=m
CONFIG_SND_SOC_INTEL_SST_ACPI=m
CONFIG_SND_SOC_INTEL_SST=m
CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m
CONFIG_SND_SOC_INTEL_HASWELL=m
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m
# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m
CONFIG_SND_SOC_INTEL_SKYLAKE=m
CONFIG_SND_SOC_INTEL_SKL=m
CONFIG_SND_SOC_INTEL_APL=m
CONFIG_SND_SOC_INTEL_KBL=m
CONFIG_SND_SOC_INTEL_GLK=m
CONFIG_SND_SOC_INTEL_CNL=m
CONFIG_SND_SOC_INTEL_CFL=m
# CONFIG_SND_SOC_INTEL_CML_H is not set
# CONFIG_SND_SOC_INTEL_CML_LP is not set
CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m
CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m
# CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC is not set
CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m
CONFIG_SND_SOC_ACPI_INTEL_MATCH=m
CONFIG_SND_SOC_INTEL_MACH=y
CONFIG_SND_SOC_INTEL_HASWELL_MACH=m
CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m
CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m
CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m
CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m
# CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH is not set
# CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH is not set
CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m
CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m
CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m
CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=m
CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m
CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m
CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m
CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m
# CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH is not set
# CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH is not set
# CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH is not set
# CONFIG_SND_SOC_MTK_BTCVSD is not set
# CONFIG_SND_SOC_SOF_TOPLEVEL is not set

#
# STMicroelectronics STM32 SOC audio support
#
# end of STMicroelectronics STM32 SOC audio support

# CONFIG_SND_SOC_XILINX_I2S is not set
# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set
# CONFIG_SND_SOC_XILINX_SPDIF is not set
# CONFIG_SND_SOC_XTFPGA_I2S is not set
# CONFIG_ZX_TDM is not set
CONFIG_SND_SOC_I2C_AND_SPI=m

#
# CODEC drivers
#
# CONFIG_SND_SOC_AC97_CODEC is not set
# CONFIG_SND_SOC_ADAU1701 is not set
# CONFIG_SND_SOC_ADAU1761_I2C is not set
# CONFIG_SND_SOC_ADAU1761_SPI is not set
# CONFIG_SND_SOC_ADAU7002 is not set
# CONFIG_SND_SOC_ADAU7118_HW is not set
# CONFIG_SND_SOC_ADAU7118_I2C is not set
# CONFIG_SND_SOC_AK4104 is not set
# CONFIG_SND_SOC_AK4118 is not set
# CONFIG_SND_SOC_AK4458 is not set
# CONFIG_SND_SOC_AK4554 is not set
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
# CONFIG_SND_SOC_AK5386 is not set
# CONFIG_SND_SOC_AK5558 is not set
# CONFIG_SND_SOC_ALC5623 is not set
# CONFIG_SND_SOC_BD28623 is not set
# CONFIG_SND_SOC_BT_SCO is not set
# CONFIG_SND_SOC_CS35L32 is not set
# CONFIG_SND_SOC_CS35L33 is not set
# CONFIG_SND_SOC_CS35L34 is not set
# CONFIG_SND_SOC_CS35L35 is not set
# CONFIG_SND_SOC_CS35L36 is not set
# CONFIG_SND_SOC_CS42L42 is not set
# CONFIG_SND_SOC_CS42L51_I2C is not set
# CONFIG_SND_SOC_CS42L52 is not set
# CONFIG_SND_SOC_CS42L56 is not set
# CONFIG_SND_SOC_CS42L73 is not set
# CONFIG_SND_SOC_CS4265 is not set
# CONFIG_SND_SOC_CS4270 is not set
# CONFIG_SND_SOC_CS4271_I2C is not set
# CONFIG_SND_SOC_CS4271_SPI is not set
# CONFIG_SND_SOC_CS42XX8_I2C is not set
# CONFIG_SND_SOC_CS43130 is not set
# CONFIG_SND_SOC_CS4341 is not set
# CONFIG_SND_SOC_CS4349 is not set
# CONFIG_SND_SOC_CS53L30 is not set
# CONFIG_SND_SOC_CX2072X is not set
CONFIG_SND_SOC_DA7213=m
CONFIG_SND_SOC_DA7219=m
CONFIG_SND_SOC_DMIC=m
# CONFIG_SND_SOC_ES7134 is not set
# CONFIG_SND_SOC_ES7241 is not set
CONFIG_SND_SOC_ES8316=m
# CONFIG_SND_SOC_ES8328_I2C is not set
# CONFIG_SND_SOC_ES8328_SPI is not set
# CONFIG_SND_SOC_GTM601 is not set
CONFIG_SND_SOC_HDAC_HDMI=m
# CONFIG_SND_SOC_INNO_RK3036 is not set
# CONFIG_SND_SOC_MAX98088 is not set
CONFIG_SND_SOC_MAX98090=m
CONFIG_SND_SOC_MAX98357A=m
# CONFIG_SND_SOC_MAX98504 is not set
# CONFIG_SND_SOC_MAX9867 is not set
CONFIG_SND_SOC_MAX98927=m
# CONFIG_SND_SOC_MAX98373 is not set
# CONFIG_SND_SOC_MAX9860 is not set
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
# CONFIG_SND_SOC_PCM1681 is not set
# CONFIG_SND_SOC_PCM1789_I2C is not set
# CONFIG_SND_SOC_PCM179X_I2C is not set
# CONFIG_SND_SOC_PCM179X_SPI is not set
# CONFIG_SND_SOC_PCM186X_I2C is not set
# CONFIG_SND_SOC_PCM186X_SPI is not set
# CONFIG_SND_SOC_PCM3060_I2C is not set
# CONFIG_SND_SOC_PCM3060_SPI is not set
# CONFIG_SND_SOC_PCM3168A_I2C is not set
# CONFIG_SND_SOC_PCM3168A_SPI is not set
# CONFIG_SND_SOC_PCM512x_I2C is not set
# CONFIG_SND_SOC_PCM512x_SPI is not set
# CONFIG_SND_SOC_RK3328 is not set
CONFIG_SND_SOC_RL6231=m
CONFIG_SND_SOC_RL6347A=m
CONFIG_SND_SOC_RT286=m
CONFIG_SND_SOC_RT298=m
CONFIG_SND_SOC_RT5514=m
CONFIG_SND_SOC_RT5514_SPI=m
# CONFIG_SND_SOC_RT5616 is not set
# CONFIG_SND_SOC_RT5631 is not set
CONFIG_SND_SOC_RT5640=m
CONFIG_SND_SOC_RT5645=m
CONFIG_SND_SOC_RT5651=m
CONFIG_SND_SOC_RT5663=m
CONFIG_SND_SOC_RT5670=m
CONFIG_SND_SOC_RT5677=m
CONFIG_SND_SOC_RT5677_SPI=m
# CONFIG_SND_SOC_SGTL5000 is not set
# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
# CONFIG_SND_SOC_SPDIF is not set
# CONFIG_SND_SOC_SSM2305 is not set
# CONFIG_SND_SOC_SSM2602_SPI is not set
# CONFIG_SND_SOC_SSM2602_I2C is not set
CONFIG_SND_SOC_SSM4567=m
# CONFIG_SND_SOC_STA32X is not set
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS2562 is not set
# CONFIG_SND_SOC_TAS2770 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
# CONFIG_SND_SOC_TAS5720 is not set
# CONFIG_SND_SOC_TAS6424 is not set
# CONFIG_SND_SOC_TDA7419 is not set
# CONFIG_SND_SOC_TFA9879 is not set
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
# CONFIG_SND_SOC_TLV320AIC31XX is not set
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
# CONFIG_SND_SOC_TLV320AIC3X is not set
CONFIG_SND_SOC_TS3A227E=m
# CONFIG_SND_SOC_TSCS42XX is not set
# CONFIG_SND_SOC_TSCS454 is not set
# CONFIG_SND_SOC_UDA1334 is not set
# CONFIG_SND_SOC_WM8510 is not set
# CONFIG_SND_SOC_WM8523 is not set
# CONFIG_SND_SOC_WM8524 is not set
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
# CONFIG_SND_SOC_WM8728 is not set
# CONFIG_SND_SOC_WM8731 is not set
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
# CONFIG_SND_SOC_WM8750 is not set
# CONFIG_SND_SOC_WM8753 is not set
# CONFIG_SND_SOC_WM8770 is not set
# CONFIG_SND_SOC_WM8776 is not set
# CONFIG_SND_SOC_WM8782 is not set
# CONFIG_SND_SOC_WM8804_I2C is not set
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
# CONFIG_SND_SOC_WM8904 is not set
# CONFIG_SND_SOC_WM8960 is not set
# CONFIG_SND_SOC_WM8962 is not set
# CONFIG_SND_SOC_WM8974 is not set
# CONFIG_SND_SOC_WM8978 is not set
# CONFIG_SND_SOC_WM8985 is not set
# CONFIG_SND_SOC_ZX_AUD96P22 is not set
# CONFIG_SND_SOC_MAX9759 is not set
# CONFIG_SND_SOC_MT6351 is not set
# CONFIG_SND_SOC_MT6358 is not set
# CONFIG_SND_SOC_NAU8540 is not set
# CONFIG_SND_SOC_NAU8810 is not set
# CONFIG_SND_SOC_NAU8822 is not set
CONFIG_SND_SOC_NAU8824=m
CONFIG_SND_SOC_NAU8825=m
# CONFIG_SND_SOC_TPA6130A2 is not set
# end of CODEC drivers

# CONFIG_SND_SIMPLE_CARD is not set
CONFIG_SND_X86=y
CONFIG_HDMI_LPE_AUDIO=m
CONFIG_SND_SYNTH_EMUX=m
# CONFIG_SND_XEN_FRONTEND is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=y
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
# CONFIG_HOLTEK_FF is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=y
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# end of Special HID drivers

#
# USB HID support
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
# end of USB HID support

#
# I2C HID support
#
CONFIG_I2C_HID=m
# end of I2C HID support

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=y
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
# CONFIG_USBIP_VHCI_HCD is not set
# CONFIG_USBIP_HOST is not set
# CONFIG_USBIP_DEBUG is not set
# CONFIG_USB_CDNS3 is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_METRO is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MXUPORT is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
# CONFIG_USB_SERIAL_WISHBONE is not set
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
CONFIG_USB_HSIC_USB3503=m
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set

#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support

#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers

# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
CONFIG_MEMSTICK_R592=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
# CONFIG_EDAC_I10NM is not set
CONFIG_EDAC_PND2=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
CONFIG_RTC_DRV_RV3029_HWMON=y

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y

#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
CONFIG_SW_SYNC=y
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_SELFTESTS is not set
# end of DMABUF options

CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
# CONFIG_HD44780 is not set
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
# CONFIG_IMG_ASCII_LCD is not set
# CONFIG_PARPORT_PANEL is not set
# CONFIG_CHARLCD_BL_OFF is not set
# CONFIG_CHARLCD_BL_ON is not set
CONFIG_CHARLCD_BL_FLASH=y
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_UIO_HV_GENERIC=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=m
CONFIG_VFIO_MDEV_DEVICE=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
# end of Microsoft Hyper-V guest support

#
# Xen driver support
#
CONFIG_XEN_BALLOON=y
# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set
CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
CONFIG_XEN_DEV_EVTCHN=m
# CONFIG_XEN_BACKEND is not set
CONFIG_XENFS=m
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_SYS_HYPERVISOR=y
CONFIG_XEN_XENBUS_FRONTEND=y
# CONFIG_XEN_GNTDEV is not set
# CONFIG_XEN_GRANT_DEV_ALLOC is not set
# CONFIG_XEN_GRANT_DMA_ALLOC is not set
CONFIG_SWIOTLB_XEN=y
# CONFIG_XEN_PVCALLS_FRONTEND is not set
CONFIG_XEN_PRIVCMD=m
CONFIG_XEN_HAVE_PVMMU=y
CONFIG_XEN_EFI=y
CONFIG_XEN_AUTO_XLATE=y
CONFIG_XEN_ACPI=y
CONFIG_XEN_HAVE_VPMU=y
# end of Xen driver support

# CONFIG_GREYBUS is not set
CONFIG_STAGING=y
# CONFIG_PRISM2_USB is not set
# CONFIG_COMEDI is not set
# CONFIG_RTL8192U is not set
CONFIG_RTLLIB=m
CONFIG_RTLLIB_CRYPTO_CCMP=m
CONFIG_RTLLIB_CRYPTO_TKIP=m
CONFIG_RTLLIB_CRYPTO_WEP=m
CONFIG_RTL8192E=m
# CONFIG_RTL8723BS is not set
CONFIG_R8712U=m
# CONFIG_R8188EU is not set
# CONFIG_RTS5208 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set

#
# IIO staging drivers
#

#
# Accelerometers
#
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16240 is not set
# end of Accelerometers

#
# Analog to digital converters
#
# CONFIG_AD7816 is not set
# CONFIG_AD7192 is not set
# CONFIG_AD7280 is not set
# end of Analog to digital converters

#
# Analog digital bi-direction converters
#
# CONFIG_ADT7316 is not set
# end of Analog digital bi-direction converters

#
# Capacitance to digital converters
#
# CONFIG_AD7150 is not set
# CONFIG_AD7746 is not set
# end of Capacitance to digital converters

#
# Direct Digital Synthesis
#
# CONFIG_AD9832 is not set
# CONFIG_AD9834 is not set
# end of Direct Digital Synthesis

#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
# end of Network Analyzer, Impedance Converters

#
# Active energy metering IC
#
# CONFIG_ADE7854 is not set
# end of Active energy metering IC

#
# Resolver to digital converters
#
# CONFIG_AD2S1210 is not set
# end of Resolver to digital converters
# end of IIO staging drivers

# CONFIG_FB_SM750 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# end of Speakup console speech

# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ASHMEM is not set
# CONFIG_ANDROID_VSOC is not set
CONFIG_ION=y
CONFIG_ION_SYSTEM_HEAP=y
# CONFIG_ION_CMA_HEAP is not set
# end of Android

# CONFIG_LTE_GDM724X is not set
CONFIG_FIREWIRE_SERIAL=m
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
# CONFIG_GS_FPGABOOT is not set
# CONFIG_UNISYSSPAR is not set
# CONFIG_FB_TFT is not set
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
# CONFIG_MOST is not set
# CONFIG_KS7010 is not set
# CONFIG_PI433 is not set

#
# Gasket devices
#
# CONFIG_STAGING_GASKET_FRAMEWORK is not set
# end of Gasket devices

# CONFIG_FIELDBUS_DEV is not set
# CONFIG_KPC2000 is not set

#
# ISDN CAPI drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_CAPI=y
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
# end of ISDN CAPI drivers

CONFIG_USB_WUSB=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=m
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
CONFIG_UWB_I1480U=m
# CONFIG_EXFAT_FS is not set
CONFIG_QLGE=m
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_WFX is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
CONFIG_DCDBAS=m
CONFIG_DELL_SMBIOS=m
CONFIG_DELL_SMBIOS_WMI=y
CONFIG_DELL_SMBIOS_SMM=y
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_DESCRIPTOR=m
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_WMI_LED is not set
CONFIG_DELL_SMO8800=m
CONFIG_DELL_RBTN=m
CONFIG_DELL_RBU=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
# CONFIG_GPD_POCKET_FAN is not set
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
# CONFIG_LG_LAPTOP is not set
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=m
# CONFIG_SURFACE3_WMI is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
CONFIG_INTEL_WMI_THUNDERBOLT=m
# CONFIG_XIAOMI_WMI is not set
CONFIG_MSI_WMI=m
# CONFIG_PEAQ_WMI is not set
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
CONFIG_INTEL_IPS=m
CONFIG_INTEL_PMC_CORE=m
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
CONFIG_SAMSUNG_Q10=m
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_INTEL_TURBO_MAX_3 is not set
# CONFIG_I2C_MULTI_INSTANTIATE is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_HUAWEI_WMI is not set
# CONFIG_PCENGINES_APU2 is not set

#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support

CONFIG_PMC_ATOM=y
# CONFIG_MFD_CROS_EC is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_PWM is not set
# end of Common Clock Framework

# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_V2=m
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Aspeed SoC drivers
#
# end of Aspeed SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=m
# CONFIG_IIO_CONFIGFS is not set
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
# CONFIG_IIO_SW_TRIGGER is not set

#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16209 is not set
# CONFIG_ADXL345_I2C is not set
# CONFIG_ADXL345_SPI is not set
# CONFIG_ADXL372_SPI is not set
# CONFIG_ADXL372_I2C is not set
# CONFIG_BMA180 is not set
# CONFIG_BMA220 is not set
# CONFIG_BMC150_ACCEL is not set
# CONFIG_DA280 is not set
# CONFIG_DA311 is not set
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_HID_SENSOR_ACCEL_3D=m
# CONFIG_IIO_ST_ACCEL_3AXIS is not set
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
# CONFIG_MC3230 is not set
# CONFIG_MMA7455_I2C is not set
# CONFIG_MMA7455_SPI is not set
# CONFIG_MMA7660 is not set
# CONFIG_MMA8452 is not set
# CONFIG_MMA9551 is not set
# CONFIG_MMA9553 is not set
# CONFIG_MXC4005 is not set
# CONFIG_MXC6255 is not set
# CONFIG_SCA3000 is not set
# CONFIG_STK8312 is not set
# CONFIG_STK8BA50 is not set
# end of Accelerometers

#
# Analog to digital converters
#
# CONFIG_AD7124 is not set
# CONFIG_AD7266 is not set
# CONFIG_AD7291 is not set
# CONFIG_AD7292 is not set
# CONFIG_AD7298 is not set
# CONFIG_AD7476 is not set
# CONFIG_AD7606_IFACE_PARALLEL is not set
# CONFIG_AD7606_IFACE_SPI is not set
# CONFIG_AD7766 is not set
# CONFIG_AD7768_1 is not set
# CONFIG_AD7780 is not set
# CONFIG_AD7791 is not set
# CONFIG_AD7793 is not set
# CONFIG_AD7887 is not set
# CONFIG_AD7923 is not set
# CONFIG_AD7949 is not set
# CONFIG_AD799X is not set
# CONFIG_HI8435 is not set
# CONFIG_HX711 is not set
# CONFIG_INA2XX_ADC is not set
# CONFIG_LTC2471 is not set
# CONFIG_LTC2485 is not set
# CONFIG_LTC2497 is not set
# CONFIG_MAX1027 is not set
# CONFIG_MAX11100 is not set
# CONFIG_MAX1118 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MAX9611 is not set
# CONFIG_MCP320X is not set
# CONFIG_MCP3422 is not set
# CONFIG_MCP3911 is not set
# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
# CONFIG_TI_ADC0832 is not set
# CONFIG_TI_ADC084S021 is not set
# CONFIG_TI_ADC12138 is not set
# CONFIG_TI_ADC108S102 is not set
# CONFIG_TI_ADC128S052 is not set
# CONFIG_TI_ADC161S626 is not set
# CONFIG_TI_ADS1015 is not set
# CONFIG_TI_ADS7950 is not set
# CONFIG_TI_TLC4541 is not set
# CONFIG_VIPERBOARD_ADC is not set
# CONFIG_XILINX_XADC is not set
# end of Analog to digital converters

#
# Analog Front Ends
#
# end of Analog Front Ends

#
# Amplifiers
#
# CONFIG_AD8366 is not set
# end of Amplifiers

#
# Chemical Sensors
#
# CONFIG_ATLAS_PH_SENSOR is not set
# CONFIG_BME680 is not set
# CONFIG_CCS811 is not set
# CONFIG_IAQCORE is not set
# CONFIG_SENSIRION_SGP30 is not set
# CONFIG_SPS30 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
# end of Hid Sensor IIO Common

#
# SSP Sensor Common
#
# CONFIG_IIO_SSP_SENSORHUB is not set
# end of SSP Sensor Common

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
# CONFIG_AD5446 is not set
# CONFIG_AD5449 is not set
# CONFIG_AD5592R is not set
# CONFIG_AD5593R is not set
# CONFIG_AD5504 is not set
# CONFIG_AD5624R_SPI is not set
# CONFIG_LTC1660 is not set
# CONFIG_LTC2632 is not set
# CONFIG_AD5686_SPI is not set
# CONFIG_AD5696_I2C is not set
# CONFIG_AD5755 is not set
# CONFIG_AD5758 is not set
# CONFIG_AD5761 is not set
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
# CONFIG_AD7303 is not set
# CONFIG_AD8801 is not set
# CONFIG_DS4424 is not set
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
# CONFIG_MCP4725 is not set
# CONFIG_MCP4922 is not set
# CONFIG_TI_DAC082S085 is not set
# CONFIG_TI_DAC5571 is not set
# CONFIG_TI_DAC7311 is not set
# CONFIG_TI_DAC7612 is not set
# end of Digital to analog converters

#
# IIO dummy driver
#
# end of IIO dummy driver

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# CONFIG_AD9523 is not set
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
# CONFIG_ADF4371 is not set
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
# CONFIG_ADIS16136 is not set
# CONFIG_ADIS16260 is not set
# CONFIG_ADXRS450 is not set
# CONFIG_BMG160 is not set
# CONFIG_FXAS21002C is not set
CONFIG_HID_SENSOR_GYRO_3D=m
# CONFIG_MPU3050_I2C is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
# CONFIG_AFE4403 is not set
# CONFIG_AFE4404 is not set
# CONFIG_MAX30100 is not set
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
# CONFIG_AM2315 is not set
# CONFIG_DHT11 is not set
# CONFIG_HDC100X is not set
# CONFIG_HID_SENSOR_HUMIDITY is not set
# CONFIG_HTS221 is not set
# CONFIG_HTU21 is not set
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set
# end of Humidity sensors

#
# Inertial measurement units
#
# CONFIG_ADIS16400 is not set
# CONFIG_ADIS16460 is not set
# CONFIG_ADIS16480 is not set
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
# CONFIG_FXOS8700_I2C is not set
# CONFIG_FXOS8700_SPI is not set
# CONFIG_KMX61 is not set
# CONFIG_INV_MPU6050_I2C is not set
# CONFIG_INV_MPU6050_SPI is not set
# CONFIG_IIO_ST_LSM6DSX is not set
# end of Inertial measurement units

#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
# CONFIG_ADJD_S311 is not set
# CONFIG_ADUX1020 is not set
# CONFIG_AL3320A is not set
# CONFIG_APDS9300 is not set
# CONFIG_APDS9960 is not set
# CONFIG_BH1750 is not set
# CONFIG_BH1780 is not set
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
# CONFIG_CM36651 is not set
# CONFIG_GP2AP020A00F is not set
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
# CONFIG_ISL29125 is not set
CONFIG_HID_SENSOR_ALS=m
CONFIG_HID_SENSOR_PROX=m
# CONFIG_JSA1212 is not set
# CONFIG_RPR0521 is not set
# CONFIG_LTR501 is not set
# CONFIG_LV0104CS is not set
# CONFIG_MAX44000 is not set
# CONFIG_MAX44009 is not set
# CONFIG_NOA1305 is not set
# CONFIG_OPT3001 is not set
# CONFIG_PA12203001 is not set
# CONFIG_SI1133 is not set
# CONFIG_SI1145 is not set
# CONFIG_STK3310 is not set
# CONFIG_ST_UVIS25 is not set
# CONFIG_TCS3414 is not set
# CONFIG_TCS3472 is not set
# CONFIG_SENSORS_TSL2563 is not set
# CONFIG_TSL2583 is not set
# CONFIG_TSL2772 is not set
# CONFIG_TSL4531 is not set
# CONFIG_US5182D is not set
# CONFIG_VCNL4000 is not set
# CONFIG_VCNL4035 is not set
# CONFIG_VEML6030 is not set
# CONFIG_VEML6070 is not set
# CONFIG_VL6180 is not set
# CONFIG_ZOPT2201 is not set
# end of Light sensors

#
# Magnetometer sensors
#
# CONFIG_AK8975 is not set
# CONFIG_AK09911 is not set
# CONFIG_BMC150_MAGN_I2C is not set
# CONFIG_BMC150_MAGN_SPI is not set
# CONFIG_MAG3110 is not set
CONFIG_HID_SENSOR_MAGNETOMETER_3D=m
# CONFIG_MMC35240 is not set
# CONFIG_IIO_ST_MAGN_3AXIS is not set
# CONFIG_SENSORS_HMC5843_I2C is not set
# CONFIG_SENSORS_HMC5843_SPI is not set
# CONFIG_SENSORS_RM3100_I2C is not set
# CONFIG_SENSORS_RM3100_SPI is not set
# end of Magnetometer sensors

#
# Multiplexers
#
# end of Multiplexers

#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=m
CONFIG_HID_SENSOR_DEVICE_ROTATION=m
# end of Inclinometer sensors

#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
# end of Triggers - standalone

#
# Digital potentiometers
#
# CONFIG_AD5272 is not set
# CONFIG_DS1803 is not set
# CONFIG_MAX5432 is not set
# CONFIG_MAX5481 is not set
# CONFIG_MAX5487 is not set
# CONFIG_MCP4018 is not set
# CONFIG_MCP4131 is not set
# CONFIG_MCP4531 is not set
# CONFIG_MCP41010 is not set
# CONFIG_TPL0102 is not set
# end of Digital potentiometers

#
# Digital potentiostats
#
# CONFIG_LMP91000 is not set
# end of Digital potentiostats

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
# CONFIG_BMP280 is not set
# CONFIG_DPS310 is not set
CONFIG_HID_SENSOR_PRESS=m
# CONFIG_HP03 is not set
# CONFIG_MPL115_I2C is not set
# CONFIG_MPL115_SPI is not set
# CONFIG_MPL3115 is not set
# CONFIG_MS5611 is not set
# CONFIG_MS5637 is not set
# CONFIG_IIO_ST_PRESS is not set
# CONFIG_T5403 is not set
# CONFIG_HP206C is not set
# CONFIG_ZPA2326 is not set
# end of Pressure sensors

#
# Lightning sensors
#
# CONFIG_AS3935 is not set
# end of Lightning sensors

#
# Proximity and distance sensors
#
# CONFIG_ISL29501 is not set
# CONFIG_LIDAR_LITE_V2 is not set
# CONFIG_MB1232 is not set
# CONFIG_RFD77402 is not set
# CONFIG_SRF04 is not set
# CONFIG_SX9500 is not set
# CONFIG_SRF08 is not set
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# CONFIG_AD2S90 is not set
# CONFIG_AD2S1200 is not set
# end of Resolver to digital converters

#
# Temperature sensors
#
# CONFIG_LTC2983 is not set
# CONFIG_MAXIM_THERMOCOUPLE is not set
# CONFIG_HID_SENSOR_TEMP is not set
# CONFIG_MLX90614 is not set
# CONFIG_MLX90632 is not set
# CONFIG_TMP006 is not set
# CONFIG_TMP007 is not set
# CONFIG_TSYS01 is not set
# CONFIG_TSYS02D is not set
# CONFIG_MAX31856 is not set
# end of Temperature sensors

CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
CONFIG_NTB_AMD=m
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
CONFIG_NTB_PERF=m
CONFIG_NTB_TRANSPORT=m
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
# CONFIG_PWM_PCA9685 is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_CPCAP_USB is not set
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
CONFIG_THUNDERBOLT=y

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_DEV_DAX_PMEM_COMPAT=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
CONFIG_PM_OPP=y
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
CONFIG_XFS_ONLINE_REPAIR=y
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_IO_TRACE is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_PMSG=y
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_GCC_PLUGIN_STACKLEAK is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_GLUE_HELPER_X86=m
CONFIG_CRYPTO_ENGINE=m

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
# CONFIG_CRYPTO_BLAKE2B is not set
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
# CONFIG_CRYPTO_LIB_BLAKE2S is not set
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=4
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_CHELSIO=m
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
# CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE is not set
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_CORDIC=m
CONFIG_PRIME_NUMBERS=m
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_BTREE=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
CONFIG_DMA_CMA=y

#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=200
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_DIMLIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_SYMBOLIC_ERRNAME=y
# end of printk and dmesg options

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_BTF is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_CC_HAS_KASAN_GENERIC=y
# CONFIG_KASAN is not set
CONFIG_KASAN_STACK=1
# end of Memory Debugging

CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# end of Debug Lockups and Hangs

CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_LOCK_TORTURE_TEST=m
CONFIG_WW_MUTEX_SELFTEST=m
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=m
CONFIG_RCU_PERF_TEST=m
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
# CONFIG_FAIL_PAGE_ALLOC is not set
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
# CONFIG_FAIL_FUTEX is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_FAIL_FUNCTION is not set
# CONFIG_FAIL_MMC_REQUEST is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_FUNCTION_PROFILER=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_KUNIT is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_TEST_SORT is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_STRSCPY=m
# CONFIG_TEST_KSTRTOX is not set
CONFIG_TEST_PRINTF=m
CONFIG_TEST_BITMAP=m
# CONFIG_TEST_BITFIELD is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_IDA is not set
CONFIG_TEST_LKM=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_BLACKHOLE_DEV=m
# CONFIG_FIND_BIT_BENCHMARK is not set
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_SYSCTL=m
# CONFIG_TEST_UDELAY is not set
CONFIG_TEST_STATIC_KEYS=m
CONFIG_TEST_KMOD=m
# CONFIG_TEST_MEMCAT_P is not set
CONFIG_TEST_LIVEPATCH=m
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_MEMTEST is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# CONFIG_UNWINDER_GUESS is not set
# end of Kernel hacking

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 5171 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='ltp'
	export testcase='ltp'
	export category='functional'
	export need_modules=true
	export need_memory='4G'
	export job_origin='/lkp/lkp/.src-20191201-135720/allot/cyclic:vm-p1:linux-devel:devel-hourly/vm-snb/ltp-1hdd-part2.yaml'
	export queue_cmdline_keys='branch
commit
queue_at_least_once'
	export queue='validate'
	export testbox='vm-snb-63c0fb4af38e'
	export tbox_group='vm-snb'
	export nr_vm=64
	export submit_id='5de50ee7dca3ab2ee9b677e0'
	export job_file='/lkp/jobs/scheduled/vm-snb-63c0fb4af38e/ltp-1HDD-btrfs-syscalls_part2-debian-x86_64-2019-09-23.cgz-53d4a4300b8-20191202-12009-1tlxf62-3.yaml'
	export id='82d3c2d1d79e3272771380e70ddf6c85ecdac193'
	export queuer_version='/lkp-src'
	export arch='x86_64'
	export model='qemu-system-x86_64 -enable-kvm -cpu SandyBridge'
	export nr_cpu=2
	export memory='8G'
	export hdd_partitions='/dev/vda /dev/vdb /dev/vdc /dev/vdd /dev/vde /dev/vdf'
	export swap_partitions='/dev/vdg'
	export need_kconfig='CONFIG_BLK_DEV_SD
CONFIG_SCSI
CONFIG_BLOCK=y
CONFIG_SATA_AHCI
CONFIG_SATA_AHCI_PLATFORM
CONFIG_ATA
CONFIG_PCI=y
CONFIG_BLK_DEV_LOOP
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_VCAN=m
CONFIG_IPV6_VTI=m
CONFIG_MINIX_FS=m
CONFIG_KVM_GUEST=y
CONFIG_BTRFS_FS'
	export commit='53d4a4300b82c4156da46eab01a8dd4e65a46491'
	export ssh_base_port=23032
	export kconfig='x86_64-rhel-7.6'
	export compiler='gcc-7'
	export rootfs='debian-x86_64-2019-09-23.cgz'
	export enqueue_time='2019-12-02 21:17:35 +0800'
	export _id='5de50ef1dca3ab2ee9b677e1'
	export _rt='/result/ltp/1HDD-btrfs-syscalls_part2/vm-snb/debian-x86_64-2019-09-23.cgz/x86_64-rhel-7.6/gcc-7/53d4a4300b82c4156da46eab01a8dd4e65a46491'
	export user='lkp'
	export head_commit='89f46f92d02f8fb46a1041c604579973c591a39e'
	export base_commit='219d54332a09e8d8741c1e1982f5eae56099de85'
	export branch='linux-devel/devel-hourly-2019120121'
	export result_root='/result/ltp/1HDD-btrfs-syscalls_part2/vm-snb/debian-x86_64-2019-09-23.cgz/x86_64-rhel-7.6/gcc-7/53d4a4300b82c4156da46eab01a8dd4e65a46491/3'
	export scheduler_version='/lkp/lkp/.src-20191202-143357'
	export LKP_SERVER='inn'
	export max_uptime=3600
	export initrd='/osimage/debian/debian-x86_64-2019-09-23.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/jobs/scheduled/vm-snb-63c0fb4af38e/ltp-1HDD-btrfs-syscalls_part2-debian-x86_64-2019-09-23.cgz-53d4a4300b8-20191202-12009-1tlxf62-3.yaml
ARCH=x86_64
kconfig=x86_64-rhel-7.6
branch=linux-devel/devel-hourly-2019120121
commit=53d4a4300b82c4156da46eab01a8dd4e65a46491
BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.6/gcc-7/53d4a4300b82c4156da46eab01a8dd4e65a46491/vmlinuz-5.4.0-08748-g53d4a4300b82c
max_uptime=3600
RESULT_ROOT=/result/ltp/1HDD-btrfs-syscalls_part2/vm-snb/debian-x86_64-2019-09-23.cgz/x86_64-rhel-7.6/gcc-7/53d4a4300b82c4156da46eab01a8dd4e65a46491/3
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/x86_64-rhel-7.6/gcc-7/53d4a4300b82c4156da46eab01a8dd4e65a46491/modules.cgz'
	export bm_initrd='/osimage/deps/debian-x86_64-2018-04-03.cgz/run-ipconfig_2018-04-03.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/lkp_2019-08-05.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/rsync-rootfs_2018-04-03.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/fs_2019-10-10.cgz,/osimage/deps/debian-x86_64-2018-04-03.cgz/ltp_2019-10-10.cgz,/osimage/pkg/debian-x86_64-2018-04-03.cgz/ltp-x86_64-dc6156b-1_2019-10-18.cgz'
	export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export repeat_to=4
	export schedule_notify_address=
	export queue_at_least_once=1
	export kernel='/pkg/linux/x86_64-rhel-7.6/gcc-7/53d4a4300b82c4156da46eab01a8dd4e65a46491/vmlinuz-5.4.0-08748-g53d4a4300b82c'
	export dequeue_time='2019-12-02 21:18:15 +0800'
	export job_initrd='/lkp/jobs/scheduled/vm-snb-63c0fb4af38e/ltp-1HDD-btrfs-syscalls_part2-debian-x86_64-2019-09-23.cgz-53d4a4300b8-20191202-12009-1tlxf62-3.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_setup nr_hdd=1 $LKP_SRC/setup/disk

	run_setup fs='btrfs' $LKP_SRC/setup/fs

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper meminfo
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test test='syscalls_part2' $LKP_SRC/tests/wrapper ltp
}

extract_stats()
{
	export stats_part_begin=
	export stats_part_end=

	$LKP_SRC/stats/wrapper ltp
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper meminfo

	$LKP_SRC/stats/wrapper time ltp.time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper last_state
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper time
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 79276 bytes --]

[-- Attachment #5: ltp --]
[-- Type: text/plain, Size: 291772 bytes --]

2019-12-02 21:19:26 ln -sf /usr/bin/genisoimage /usr/bin/mkisofs
2019-12-02 21:19:26 ./runltp -f syscalls_part2 -d /fs/vda/tmpdir
INFO: creating /lkp/benchmarks/ltp/output directory
INFO: creating /lkp/benchmarks/ltp/results directory
Checking for required user/group ids

'nobody' user id and group found.
'bin' user id and group found.
'daemon' user id and group found.
Users group found.
Sys group found.
Required users/groups exist.
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

/etc/os-release
PRETTY_NAME="Debian GNU/Linux 9 (stretch)"
NAME="Debian GNU/Linux"
VERSION_ID="9"
VERSION="9 (stretch)"
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

uname:
Linux vm-snb-63c0fb4af38e 5.4.0-08748-g53d4a4300b82c #2 SMP Sun Dec 1 08:10:20 CST 2019 x86_64 GNU/Linux

/proc/cmdline
ip=::::vm-snb-63c0fb4af38e::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/vm-snb-63c0fb4af38e/ltp-1HDD-btrfs-syscalls_part2-debian-x86_64-2019-09-23.cgz-53d4a4300b8-20191202-12009-1tlxf62-3.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.6 branch=linux-devel/devel-hourly-2019120121 commit=53d4a4300b82c4156da46eab01a8dd4e65a46491 BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.6/gcc-7/53d4a4300b82c4156da46eab01a8dd4e65a46491/vmlinuz-5.4.0-08748-g53d4a4300b82c max_uptime=3600 RESULT_ROOT=/result/ltp/1HDD-btrfs-syscalls_part2/vm-snb/debian-x86_64-2019-09-23.cgz/x86_64-rhel-7.6/gcc-7/53d4a4300b82c4156da46eab01a8dd4e65a46491/3 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw rcuperf.shutdown=0 watchdog_thresh=60

Gnu C                  gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
Clang                 
Gnu make               4.1
util-linux             2.29.2
mount                  linux 2.29.2 (libmount 2.29.2: selinux, btrfs, assert, debug)
modutils               23
e2fsprogs              1.43.4
Linux C Library        > libc.2.24
Dynamic linker (ldd)   2.24
Procps                 3.3.12
Net-tools              2.10-alpha
iproute2               iproute2-ss161212
iputils                iputils-s20161105
Kbd                    116:
Sh-utils               8.26
Modules Loaded         btrfs xor zstd_decompress zstd_compress raid6_pq libcrc32c dm_mod sr_mod cdrom sg ata_generic pata_acpi intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel bochs_drm drm_vram_helper drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ppdev snd_pcm snd_timer drm snd aesni_intel crypto_simd cryptd glue_helper joydev ata_piix soundcore serio_raw pcspkr libata i2c_piix4 parport_pc floppy parport ip_tables

free reports:
              total        used        free      shared  buff/cache   available
Mem:        8149364      282120     5695784       11744     2171460     5584880
Swap:             0           0           0

cpuinfo:
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                2
On-line CPU(s) list:   0,1
Thread(s) per core:    1
Core(s) per socket:    1
Socket(s):             2
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 42
Model name:            Intel Xeon E312xx (Sandy Bridge)
Stepping:              1
CPU MHz:               2194.916
BogoMIPS:              4389.83
Hypervisor vendor:     KVM
Virtualization type:   full
L1d cache:             32K
L1i cache:             32K
L2 cache:              4096K
L3 cache:              16384K
NUMA node0 CPU(s):     0,1
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp lm constant_tsc rep_good nopl xtopology cpuid tsc_known_freq pni pclmulqdq ssse3 cx16 sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx hypervisor lahf_lm cpuid_fault pti xsaveopt arat

AppArmor disabled

SELinux mode: unknown
no big block device was specified on commandline.
Tests which require a big block device are disabled.
You can specify it with option -z
COMMAND:    /lkp/benchmarks/ltp/bin/ltp-pan   -e -S   -a 2244     -n 2244 -p -f /fs/vda/tmpdir/ltp-rD8LOpvacC/alltests -l /lkp/benchmarks/ltp/results/LTP_RUN_ON-2019_12_02-21h_19m_26s.log  -C /lkp/benchmarks/ltp/output/LTP_RUN_ON-2019_12_02-21h_19m_26s.failed -T /lkp/benchmarks/ltp/output/LTP_RUN_ON-2019_12_02-21h_19m_26s.tconf
LOG File: /lkp/benchmarks/ltp/results/LTP_RUN_ON-2019_12_02-21h_19m_26s.log
FAILED COMMAND File: /lkp/benchmarks/ltp/output/LTP_RUN_ON-2019_12_02-21h_19m_26s.failed
TCONF COMMAND File: /lkp/benchmarks/ltp/output/LTP_RUN_ON-2019_12_02-21h_19m_26s.tconf
Running tests.......
<<<test_start>>>
tag=getcpu01 stime=1575292768
cmdline="getcpu01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getcpu01.c:152: PASS: getcpu() returned proper cpuid:1, node id:0

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd01 stime=1575292768
cmdline="getcwd01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getcwd01.c:62: PASS: getcwd() failed as expected: EFAULT (14)
getcwd01.c:62: PASS: getcwd() failed as expected: ENOMEM (12)
getcwd01.c:62: PASS: getcwd() failed as expected: EINVAL (22)
getcwd01.c:62: PASS: getcwd() failed as expected: ERANGE (34)
getcwd01.c:62: PASS: getcwd() failed as expected: ERANGE (34)

Summary:
passed   5
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd02 stime=1575292768
cmdline="getcwd02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getcwd02.c:102: INFO: Expected path '/tmp'
getcwd02.c:86: PASS: getcwd() returned expected directory: /tmp
getcwd02.c:86: PASS: getcwd() returned expected directory: /tmp
getcwd02.c:86: PASS: getcwd() returned expected directory: /tmp

Summary:
passed   3
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd03 stime=1575292768
cmdline="getcwd03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getcwd03.c:73: PASS: getcwd() succeeded on a symbolic link

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getcwd04 stime=1575292768
cmdline="getcwd04"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getcwd04.c:60: PASS: Bug is not reproduced!

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=5 termination_type=exited termination_id=0 corefile=no
cutime=121 cstime=529
<<<test_end>>>
<<<test_start>>>
tag=getdents01 stime=1575292773
cmdline="getdents01"
contacts=""
analysis=exit
<<<test_output>>>
getdents01    0  TINFO  :  Found '.'
getdents01    0  TINFO  :  Found '..'
getdents01    0  TINFO  :  Found 'dir'
getdents01    0  TINFO  :  Found 'file'
getdents01    0  TINFO  :  Found 'symlink'
getdents01    1  TPASS  :  All entires found
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdents02 stime=1575292773
cmdline="getdents02"
contacts=""
analysis=exit
<<<test_output>>>
getdents02    1  TPASS  :  getdents failed as expected: Bad file descriptor
getdents02    2  TPASS  :  getdents failed as expected: Invalid argument
getdents02    3  TPASS  :  getdents failed as expected: Not a directory
getdents02    4  TPASS  :  getdents failed as expected: No such file or directory
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdents01_64 stime=1575292773
cmdline="getdents01 -l"
contacts=""
analysis=exit
<<<test_output>>>
getdents01    0  TINFO  :  Found '.'
getdents01    0  TINFO  :  Found '..'
getdents01    0  TINFO  :  Found 'dir'
getdents01    0  TINFO  :  Found 'file'
getdents01    0  TINFO  :  Found 'symlink'
getdents01    1  TPASS  :  All entires found
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdents02_64 stime=1575292773
cmdline="getdents02 -l"
contacts=""
analysis=exit
<<<test_output>>>
getdents02    1  TPASS  :  getdents failed as expected: Bad file descriptor
getdents02    2  TPASS  :  getdents failed as expected: Invalid argument
getdents02    3  TPASS  :  getdents failed as expected: Not a directory
getdents02    4  TPASS  :  getdents failed as expected: No such file or directory
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdomainname01 stime=1575292773
cmdline="getdomainname01"
contacts=""
analysis=exit
<<<test_output>>>
getdomainname01    1  TPASS  :  getdomainname() returned 0 
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getdtablesize01 stime=1575292773
cmdline="getdtablesize01"
contacts=""
analysis=exit
<<<test_output>>>
getdtablesize01    0  TINFO  :  Maximum number of files a process can have opened is 1024
getdtablesize01    0  TINFO  :  Checking with the value returned by getrlimit...RLIMIT_NOFILE
getdtablesize01    1  TPASS  :  got correct dtablesize, value is 1024
getdtablesize01    0  TINFO  :  Checking Max num of files that can be opened by a process.Should be: RLIMIT_NOFILE - 1
getdtablesize01    2  TPASS  :  1023 = 1023
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getegid01 stime=1575292773
cmdline="getegid01"
contacts=""
analysis=exit
<<<test_output>>>
getegid01    1  TPASS  :  getegid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid01_16 stime=1575292773
cmdline="getegid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getegid01_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:114: 16-bit version of getegid() is not supported on your platform
getegid01_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:114: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid02 stime=1575292773
cmdline="getegid02"
contacts=""
analysis=exit
<<<test_output>>>
getegid02    1  TPASS  :  effective group id 0 is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getegid02_16 stime=1575292773
cmdline="getegid02_16"
contacts=""
analysis=exit
<<<test_output>>>
getegid02_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:114: 16-bit version of getegid() is not supported on your platform
getegid02_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getegid/../utils/compat_16.h:114: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid01 stime=1575292773
cmdline="geteuid01"
contacts=""
analysis=exit
<<<test_output>>>
geteuid01    1  TPASS  :  geteuid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid01_16 stime=1575292773
cmdline="geteuid01_16"
contacts=""
analysis=exit
<<<test_output>>>
geteuid01_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:109: 16-bit version of geteuid() is not supported on your platform
geteuid01_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:109: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid02 stime=1575292773
cmdline="geteuid02"
contacts=""
analysis=exit
<<<test_output>>>
geteuid02    1  TPASS  :  values from geteuid and getpwuid match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=geteuid02_16 stime=1575292773
cmdline="geteuid02_16"
contacts=""
analysis=exit
<<<test_output>>>
geteuid02_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:109: 16-bit version of geteuid() is not supported on your platform
geteuid02_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/geteuid/../utils/compat_16.h:109: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid01 stime=1575292773
cmdline="getgid01"
contacts=""
analysis=exit
<<<test_output>>>
getgid01    1  TPASS  :  getgid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid01_16 stime=1575292773
cmdline="getgid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getgid01_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:104: 16-bit version of getgid() is not supported on your platform
getgid01_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:104: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getgid03 stime=1575292773
cmdline="getgid03"
contacts=""
analysis=exit
<<<test_output>>>
getgid03    1  TPASS  :  values from getuid and getpwuid match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgid03_16 stime=1575292773
cmdline="getgid03_16"
contacts=""
analysis=exit
<<<test_output>>>
getgid03_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:104: 16-bit version of getgid() is not supported on your platform
getgid03_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getgid/../utils/compat_16.h:104: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups01 stime=1575292773
cmdline="getgroups01"
contacts=""
analysis=exit
<<<test_output>>>
getgroups01    1  TPASS  :  getgroups failed as expected with EINVAL
getgroups01    2  TPASS  :  getgroups did not modify the gidset array
getgroups01    3  TPASS  :  getgroups failed as expected with EINVAL
getgroups01    4  TPASS  :  getgroups(NGROUPS,gidset) returned 3 contains gid 0 (from getgid)
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups01_16 stime=1575292773
cmdline="getgroups01_16"
contacts=""
analysis=exit
<<<test_output>>>
getgroups01_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:84: 16-bit version of getgroups() is not supported on your platform
getgroups01_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:84: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups03 stime=1575292773
cmdline="getgroups03"
contacts=""
analysis=exit
<<<test_output>>>
getgroups03    1  TPASS  :  getgroups functionality correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getgroups03_16 stime=1575292773
cmdline="getgroups03_16"
contacts=""
analysis=exit
<<<test_output>>>
getgroups03_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:79: 16-bit version of setgroups() is not supported on your platform
getgroups03_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getgroups/../utils/compat_16.h:79: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gethostbyname_r01 stime=1575292773
cmdline="gethostbyname_r01"
contacts=""
analysis=exit
<<<test_output>>>
gethostbyname_r01    1  TPASS  :  not vulnerable
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gethostid01 stime=1575292773
cmdline="gethostid01"
contacts=""
analysis=exit
<<<test_output>>>
gethostid01    1  TPASS  :  Hostid command and gethostid both report hostid is 007f0100
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gethostname01 stime=1575292773
cmdline="gethostname01"
contacts=""
analysis=exit
<<<test_output>>>
gethostname01    1  TPASS  :  gethostname returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getitimer01 stime=1575292773
cmdline="getitimer01"
contacts=""
analysis=exit
<<<test_output>>>
getitimer01    1  TPASS  :  functionality is ok
getitimer01    2  TPASS  :  functionality is ok
getitimer01    3  TPASS  :  functionality is ok
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getitimer02 stime=1575292773
cmdline="getitimer02"
contacts=""
analysis=exit
<<<test_output>>>
getitimer02    1  TPASS  :  expected failure - errno = 14 - Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getitimer03 stime=1575292773
cmdline="getitimer03"
contacts=""
analysis=exit
<<<test_output>>>
getitimer03    1  TPASS  :  expected failure - errno = 22 - Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpagesize01 stime=1575292773
cmdline="getpagesize01"
contacts=""
analysis=exit
<<<test_output>>>
getpagesize01    0  TINFO  :  Page Size is 4096
getpagesize01    1  TPASS  :  getpagesize - Page size returned 4096
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpeername01 stime=1575292773
cmdline="getpeername01"
contacts=""
analysis=exit
<<<test_output>>>
getpeername01    1  TPASS  :  test getpeername() EBADF successful
getpeername01    2  TPASS  :  test getpeername() ENOTSOCK successful
getpeername01    3  TPASS  :  test getpeername() ENOTCONN successful
getpeername01    4  TPASS  :  test getpeername() EINVAL successful
getpeername01    5  TPASS  :  test getpeername() EFAULT successful
getpeername01    6  TPASS  :  test getpeername() EFAULT successful
getpeername01    7  TPASS  :  test getpeername() EFAULT successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpgid01 stime=1575292773
cmdline="getpgid01"
contacts=""
analysis=exit
<<<test_output>>>
getpgid01    0  TINFO  :  Enter block 1
getpgid01    1  TPASS  :  Test block 1: getpgid(0) PASSED
getpgid01    0  TINFO  :  Exit block 1
getpgid01    0  TINFO  :  Enter block 2
getpgid01    2  TPASS  :  Test block 2: getpgid(getpid()) PASSED
getpgid01    0  TINFO  :  Exit block 2
getpgid01    0  TINFO  :  Enter block 3
getpgid01    3  TPASS  :  Test block 3: getpgid(getppid()) PASSED
getpgid01    0  TINFO  :  Exit block 3
getpgid01    0  TINFO  :  Enter block 4
getpgid01    4  TPASS  :  Test block 4: getpgid(1) PASSED
getpgid01    0  TINFO  :  Exit block 4
getpgid01    0  TINFO  :  Enter block 5
getpgid01    5  TPASS  :  Test block 5: getpgid(1) PASSED
getpgid01    0  TINFO  :  Exit block 5
getpgid01    0  TINFO  :  getpgid01 PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpgid02 stime=1575292773
cmdline="getpgid02"
contacts=""
analysis=exit
<<<test_output>>>
getpgid02    1  TPASS  :  expected failure - errno = 3 : No such process
getpgid02    2  TPASS  :  expected failure - errno = 3 : No such process
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpgrp01 stime=1575292773
cmdline="getpgrp01"
contacts=""
analysis=exit
<<<test_output>>>
getpgrp01    1  TPASS  :  getpgrp returned 2468
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpid01 stime=1575292773
cmdline="getpid01"
contacts=""
analysis=exit
<<<test_output>>>
getpid01    1  TPASS  :  getpid returned 2469
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpid02 stime=1575292773
cmdline="getpid02"
contacts=""
analysis=exit
<<<test_output>>>
getpid02    1  TPASS  :  getpid functionality is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getppid01 stime=1575292773
cmdline="getppid01"
contacts=""
analysis=exit
<<<test_output>>>
getppid01    1  TPASS  :  getppid returned 2406
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getppid02 stime=1575292773
cmdline="getppid02"
contacts=""
analysis=exit
<<<test_output>>>
return value and parent's pid value match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpriority01 stime=1575292773
cmdline="getpriority01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getpriority01.c:50: PASS: getpriority(0, 0) returned 0
getpriority01.c:50: PASS: getpriority(1, 0) returned 0
getpriority01.c:50: PASS: getpriority(2, 0) returned -20

Summary:
passed   3
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getpriority02 stime=1575292773
cmdline="getpriority02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getpriority02.c:58: PASS: getpriority(-1, 0) fails as expected: EINVAL (22)
getpriority02.c:58: PASS: getpriority(0, -1) fails as expected: ESRCH (3)
getpriority02.c:58: PASS: getpriority(1, -1) fails as expected: ESRCH (3)
getpriority02.c:58: PASS: getpriority(2, -1) fails as expected: ESRCH (3)

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getrandom01 stime=1575292773
cmdline="getrandom01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getrandom01.c:21: PASS: getrandom returned -1: EFAULT (14)
getrandom01.c:21: PASS: getrandom returned -1: EFAULT (14)
getrandom01.c:21: PASS: getrandom returned -1: EFAULT (14)
getrandom01.c:21: PASS: getrandom returned -1: EAGAIN/EWOULDBLOCK (11)

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=330 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=10
<<<test_end>>>
<<<test_start>>>
tag=getrandom02 stime=1575293103
cmdline="getrandom02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getrandom02.c:51: PASS: getrandom returned 256
getrandom02.c:51: PASS: getrandom returned 6
getrandom02.c:51: PASS: getrandom returned 256
getrandom02.c:51: PASS: getrandom returned 6

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=207 termination_type=exited termination_id=0 corefile=no
cutime=4491 cstime=5892
<<<test_end>>>
<<<test_start>>>
tag=getrandom03 stime=1575293311
cmdline="getrandom03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getrandom03.c:37: PASS: getrandom returned 1
getrandom03.c:37: PASS: getrandom returned 2
getrandom03.c:37: PASS: getrandom returned 3
getrandom03.c:37: PASS: getrandom returned 7
getrandom03.c:37: PASS: getrandom returned 8
getrandom03.c:37: PASS: getrandom returned 15
getrandom03.c:37: PASS: getrandom returned 22
getrandom03.c:37: PASS: getrandom returned 64
getrandom03.c:37: PASS: getrandom returned 127

Summary:
passed   9
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=4 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=getrandom04 stime=1575293312
cmdline="getrandom04"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getrandom04.c:28: PASS: getrandom returned 100

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=8 cstime=7
<<<test_end>>>
<<<test_start>>>
tag=getresgid01 stime=1575293312
cmdline="getresgid01"
contacts=""
analysis=exit
<<<test_output>>>
getresgid01    1  TPASS  :  Functionality of getresgid() successful
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=17 cstime=35
<<<test_end>>>
<<<test_start>>>
tag=getresgid01_16 stime=1575293313
cmdline="getresgid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getresgid01    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresgid/../utils/compat_16.h:153: 16-bit version of getresgid() is not supported on your platform
getresgid01    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresgid/../utils/compat_16.h:153: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=8 cstime=10
<<<test_end>>>
<<<test_start>>>
tag=getresgid02 stime=1575293313
cmdline="getresgid02"
contacts=""
analysis=exit
<<<test_output>>>
getresgid02    1  TPASS  :  Functionality of getresgid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=7
<<<test_end>>>
<<<test_start>>>
tag=getresgid02_16 stime=1575293313
cmdline="getresgid02_16"
contacts=""
analysis=exit
<<<test_output>>>
getresgid02    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresgid/../utils/compat_16.h:153: 16-bit version of getresgid() is not supported on your platform
getresgid02    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresgid/../utils/compat_16.h:153: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=14
<<<test_end>>>
<<<test_start>>>
tag=getresgid03 stime=1575293314
cmdline="getresgid03"
contacts=""
analysis=exit
<<<test_output>>>
getresgid03    1  TPASS  :  Functionality of getresgid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=12
<<<test_end>>>
<<<test_start>>>
tag=getresgid03_16 stime=1575293314
cmdline="getresgid03_16"
contacts=""
analysis=exit
<<<test_output>>>
getresgid03    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresgid/../utils/compat_16.h:153: 16-bit version of getresgid() is not supported on your platform
getresgid03    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresgid/../utils/compat_16.h:153: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=5
<<<test_end>>>
<<<test_start>>>
tag=getresuid01 stime=1575293314
cmdline="getresuid01"
contacts=""
analysis=exit
<<<test_output>>>
getresuid01    1  TPASS  :  Functionality of getresuid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=14
<<<test_end>>>
<<<test_start>>>
tag=getresuid01_16 stime=1575293314
cmdline="getresuid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getresuid01    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresuid/../utils/compat_16.h:143: 16-bit version of getresuid() is not supported on your platform
getresuid01    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresuid/../utils/compat_16.h:143: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=1 cstime=9
<<<test_end>>>
<<<test_start>>>
tag=getresuid02 stime=1575293314
cmdline="getresuid02"
contacts=""
analysis=exit
<<<test_output>>>
getresuid02    1  TPASS  :  Functionality of getresuid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=2 cstime=8
<<<test_end>>>
<<<test_start>>>
tag=getresuid02_16 stime=1575293314
cmdline="getresuid02_16"
contacts=""
analysis=exit
<<<test_output>>>
getresuid02    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresuid/../utils/compat_16.h:143: 16-bit version of getresuid() is not supported on your platform
getresuid02    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresuid/../utils/compat_16.h:143: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=32 corefile=no
cutime=5 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=getresuid03 stime=1575293315
cmdline="getresuid03"
contacts=""
analysis=exit
<<<test_output>>>
getresuid03    1  TPASS  :  Functionality of getresuid() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=3
<<<test_end>>>
<<<test_start>>>
tag=getresuid03_16 stime=1575293315
cmdline="getresuid03_16"
contacts=""
analysis=exit
<<<test_output>>>
getresuid03    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresuid/../utils/compat_16.h:143: 16-bit version of getresuid() is not supported on your platform
getresuid03    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getresuid/../utils/compat_16.h:143: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=2 cstime=20
<<<test_end>>>
<<<test_start>>>
tag=getrlimit01 stime=1575293315
cmdline="getrlimit01"
contacts=""
analysis=exit
<<<test_output>>>
getrlimit01    1  TPASS  :  getrlimit() test RLIMIT_CPU success
getrlimit01    2  TPASS  :  getrlimit() test RLIMIT_FSIZE success
getrlimit01    3  TPASS  :  getrlimit() test RLIMIT_DATA success
getrlimit01    4  TPASS  :  getrlimit() test RLIMIT_STACK success
getrlimit01    5  TPASS  :  getrlimit() test RLIMIT_CORE success
getrlimit01    6  TPASS  :  getrlimit() test RLIMIT_RSS success
getrlimit01    7  TPASS  :  getrlimit() test RLIMIT_NPROC success
getrlimit01    8  TPASS  :  getrlimit() test RLIMIT_NOFILE success
getrlimit01    9  TPASS  :  getrlimit() test RLIMIT_MEMLOCK success
getrlimit01   10  TPASS  :  getrlimit() test RLIMIT_AS success
getrlimit01   11  TPASS  :  getrlimit() test RLIMIT_LOCKS success
getrlimit01   12  TPASS  :  getrlimit() test RLIMIT_MSGQUEUE success
getrlimit01   13  TPASS  :  getrlimit() test RLIMIT_NICE success
getrlimit01   14  TPASS  :  getrlimit() test RLIMIT_RTPRIO success
getrlimit01   15  TPASS  :  getrlimit() test RLIMIT_SIGPENDING success
getrlimit01   16  TPASS  :  getrlimit() test RLIMIT_RTTIME success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=2 cstime=24
<<<test_end>>>
<<<test_start>>>
tag=getrlimit02 stime=1575293315
cmdline="getrlimit02"
contacts=""
analysis=exit
<<<test_output>>>
getrlimit02    1  TPASS  :  expected failure; got EFAULT
getrlimit02    2  TPASS  :  expected failure; got EINVAL
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=5 cstime=5
<<<test_end>>>
<<<test_start>>>
tag=getrlimit03 stime=1575293315
cmdline="getrlimit03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getrlimit03.c:168: PASS: __NR_prlimit64(0) and __NR_getrlimit(0) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(1) and __NR_getrlimit(1) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(2) and __NR_getrlimit(2) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(3) and __NR_getrlimit(3) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(4) and __NR_getrlimit(4) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(5) and __NR_getrlimit(5) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(6) and __NR_getrlimit(6) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(7) and __NR_getrlimit(7) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(8) and __NR_getrlimit(8) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(9) and __NR_getrlimit(9) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(10) and __NR_getrlimit(10) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(11) and __NR_getrlimit(11) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(12) and __NR_getrlimit(12) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(13) and __NR_getrlimit(13) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(14) and __NR_getrlimit(14) gave consistent results
getrlimit03.c:168: PASS: __NR_prlimit64(15) and __NR_getrlimit(15) gave consistent results

Summary:
passed   16
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=4 cstime=8
<<<test_end>>>
<<<test_start>>>
tag=get_mempolicy01 stime=1575293316
cmdline="get_mempolicy01"
contacts=""
analysis=exit
<<<test_output>>>
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=0 errno=0 (Success)
RESULT: return value(ret)=0 errno=0 (Success)
EXPECT: return value(ret)=-1 errno=14 (Bad address)
RESULT: return value(ret)=-1 errno=14 (Bad address)
EXPECT: return value(ret)=-1 errno=22 (Invalid argument)
RESULT: return value(ret)=-1 errno=22 (Invalid argument)
get_mempolicy01    0  TINFO  :  (case00) START
get_mempolicy01    1  TPASS  :  (case00) END
get_mempolicy01    0  TINFO  :  (case01) START
get_mempolicy01    2  TPASS  :  (case01) END
get_mempolicy01    0  TINFO  :  (case02) START
get_mempolicy01    3  TPASS  :  (case02) END
get_mempolicy01    0  TINFO  :  (case03) START
get_mempolicy01    4  TPASS  :  (case03) END
get_mempolicy01    0  TINFO  :  (case04) START
get_mempolicy01    5  TPASS  :  (case04) END
get_mempolicy01    0  TINFO  :  (case05) START
get_mempolicy01    6  TPASS  :  (case05) END
get_mempolicy01    0  TINFO  :  (case06) START
get_mempolicy01    7  TPASS  :  (case06) END
get_mempolicy01    0  TINFO  :  (case07) START
get_mempolicy01    8  TPASS  :  (case07) END
get_mempolicy01    0  TINFO  :  (case08) START
get_mempolicy01    9  TPASS  :  (case08) END
get_mempolicy01    0  TINFO  :  (case09) START
get_mempolicy01   10  TPASS  :  (case09) END
get_mempolicy01    0  TINFO  :  (case10) START
get_mempolicy01   11  TPASS  :  (case10) END
get_mempolicy01    0  TINFO  :  (case11) START
get_mempolicy01   12  TPASS  :  (case11) END
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=12 cstime=133
<<<test_end>>>
<<<test_start>>>
tag=get_robust_list01 stime=1575293317
cmdline="get_robust_list01"
contacts=""
analysis=exit
<<<test_output>>>
get_robust_list01    1  TPASS  :  get_robust_list failed as expected with EFAULT
get_robust_list01    2  TPASS  :  get_robust_list failed as expected with EFAULT
get_robust_list01    3  TPASS  :  get_robust_list failed as expected with ESRCH
get_robust_list01    4  TPASS  :  get_robust_list succeeded
get_robust_list01    5  TPASS  :  get_robust_list failed as expected with EPERM
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=18 cstime=19
<<<test_end>>>
<<<test_start>>>
tag=getrusage01 stime=1575293318
cmdline="getrusage01"
contacts=""
analysis=exit
<<<test_output>>>
getrusage01    1  TPASS  :  getrusage passed
getrusage01    2  TPASS  :  getrusage passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=5 cstime=15
<<<test_end>>>
<<<test_start>>>
tag=getrusage02 stime=1575293318
cmdline="getrusage02"
contacts=""
analysis=exit
<<<test_output>>>
getrusage02    1  TPASS  :  getrusage failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
getrusage02    2  TPASS  :  getrusage failed as expected: TEST_ERRNO=EFAULT(14): Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=2 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=getrusage03 stime=1575293318
cmdline="getrusage03"
contacts=""
analysis=exit
<<<test_output>>>
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103764
getrusage03    0  TINFO  :  child.self = 102496
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103764
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103532
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    0  TINFO  :  child.children = 0
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103764
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103532
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 103984
getrusage03    0  TINFO  :  child allocate +50MB
getrusage03    0  TINFO  :  child.self = 154324
getrusage03_child    0  TINFO  :  grandchild allocate 300MB
getrusage03_child    0  TINFO  :  grandchild allocate 300MB
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103764
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103532
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 103984
getrusage03    4  TPASS  :  initial.self + 50MB ~= child.self
getrusage03    0  TINFO  :  Testcase #04: grandchild maxrss
getrusage03    0  TINFO  :  initial.children = 154800
getrusage03_child    0  TINFO  :  child allocate 400MB
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103764
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103532
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 103984
getrusage03    4  TPASS  :  initial.self + 50MB ~= child.self
getrusage03    0  TINFO  :  Testcase #04: grandchild maxrss
getrusage03    0  TINFO  :  initial.children = 154800
getrusage03    0  TINFO  :  post_wait.children = 308184
getrusage03    5  TPASS  :  child.children ~= 300MB
getrusage03    0  TINFO  :  Testcase #05: zombie
getrusage03    0  TINFO  :  initial.children = 308184
getrusage03_child    0  TINFO  :  child allocate 500MB
getrusage03    0  TINFO  :  allocate 100MB
getrusage03    0  TINFO  :  Testcase #01: fork inherit
getrusage03    0  TINFO  :  initial.self = 103764
getrusage03    1  TPASS  :  initial.self ~= child.self
getrusage03    0  TINFO  :  Testcase #02: fork inherit(cont.)
getrusage03    0  TINFO  :  initial.children = 103532
getrusage03    2  TPASS  :  initial.children ~= 100MB
getrusage03    3  TPASS  :  child.children == 0
getrusage03    0  TINFO  :  Testcase #03: fork + malloc
getrusage03    0  TINFO  :  initial.self = 103984
getrusage03    4  TPASS  :  initial.self + 50MB ~= child.self
getrusage03    0  TINFO  :  Testcase #04: grandchild maxrss
getrusage03    0  TINFO  :  initial.children = 154800
getrusage03    0  TINFO  :  post_wait.children = 308184
getrusage03    5  TPASS  :  child.children ~= 300MB
getrusage03    0  TINFO  :  Testcase #05: zombie
getrusage03    0  TINFO  :  initial.children = 308184
getrusage03    0  TINFO  :  pre_wait.children = 308184
getrusage03    6  TPASS  :  initial.children ~= pre_wait.children
getrusage03    0  TINFO  :  post_wait.children = 411028
getrusage03    7  TPASS  :  post_wait.children ~= 400MB
getrusage03    0  TINFO  :  Testcase #06: SIG_IGN
getrusage03    0  TINFO  :  initial.children = 411028
getrusage03_child    0  TINFO  :  exec.self = 103996, exec.children = 411028
getrusage03_child    1  TPASS  :  initial.self ~= exec.self
getrusage03_child    2  TPASS  :  initial.children ~= exec.children
<<<execution_status>>>
initiation_status="ok"
duration=8 termination_type=exited termination_id=0 corefile=no
cutime=17 cstime=586
<<<test_end>>>
<<<test_start>>>
tag=getrusage04 stime=1575293326
cmdline="getrusage04"
contacts=""
analysis=exit
<<<test_output>>>
getrusage04    1  TCONF  :  getrusage04.c:202: This testcase is not supported on this virtual machine.
getrusage04    2  TCONF  :  getrusage04.c:202: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=32 corefile=no
cutime=1 cstime=3
<<<test_end>>>
<<<test_start>>>
tag=getsid01 stime=1575293327
cmdline="getsid01"
contacts=""
analysis=exit
<<<test_output>>>
getsid01    1  TPASS  :  session ID is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getsid02 stime=1575293327
cmdline="getsid02"
contacts=""
analysis=exit
<<<test_output>>>
getsid02    1  TPASS  :  expected failure - errno = 3 - No such process
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getsockname01 stime=1575293327
cmdline="getsockname01"
contacts=""
analysis=exit
<<<test_output>>>
getsockname01    1  TPASS  :  bad file descriptor successful
getsockname01    2  TPASS  :  bad file descriptor successful
getsockname01    3  TPASS  :  invalid socket buffer successful
getsockname01    4  TPASS  :  invalid aligned salen successful
getsockname01    5  TPASS  :  invalid unaligned salen successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getsockopt01 stime=1575293327
cmdline="getsockopt01"
contacts=""
analysis=exit
<<<test_output>>>
getsockopt01    1  TPASS  :  bad file descriptor successful
getsockopt01    2  TPASS  :  bad file descriptor successful
getsockopt01    3  TPASS  :  invalid option buffer successful
getsockopt01    4  TPASS  :  invalid optlen successful
getsockopt01    5  TPASS  :  invalid level successful
getsockopt01    6  TPASS  :  invalid option name successful
getsockopt01    7  TPASS  :  invalid option name (UDP) successful
getsockopt01    8  TPASS  :  invalid option name (IP) successful
getsockopt01    9  TPASS  :  invalid option name (TCP) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getsockopt02 stime=1575293327
cmdline="getsockopt02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getsockopt02.c:66: PASS: Test passed

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=gettid01 stime=1575293327
cmdline="gettid01"
contacts=""
analysis=exit
<<<test_output>>>
gettid01    1  TPASS  :  gettid() returned 4336
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gettimeofday01 stime=1575293327
cmdline="gettimeofday01"
contacts=""
analysis=exit
<<<test_output>>>
gettimeofday01    1  TPASS  :  gettimeofday(2) set the errno EFAULT correctly
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=gettimeofday02 stime=1575293327
cmdline="gettimeofday02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
gettimeofday02.c:76: INFO: gettimeofday() called 14478038 times
gettimeofday02.c:77: PASS: gettimeofday() monotonous in 10 seconds

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=10 termination_type=exited termination_id=0 corefile=no
cutime=325 cstime=660
<<<test_end>>>
<<<test_start>>>
tag=getuid01 stime=1575293337
cmdline="getuid01"
contacts=""
analysis=exit
<<<test_output>>>
getuid01    1  TPASS  :  getuid returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getuid01_16 stime=1575293337
cmdline="getuid01_16"
contacts=""
analysis=exit
<<<test_output>>>
getuid01_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:94: 16-bit version of getuid() is not supported on your platform
getuid01_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:94: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getuid03 stime=1575293337
cmdline="getuid03"
contacts=""
analysis=exit
<<<test_output>>>
getuid03    1  TPASS  :  values from getuid and getpwuid match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getuid03_16 stime=1575293337
cmdline="getuid03_16"
contacts=""
analysis=exit
<<<test_output>>>
getuid03_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:94: 16-bit version of getuid() is not supported on your platform
getuid03_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/getuid/../utils/compat_16.h:94: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getxattr01 stime=1575293337
cmdline="getxattr01"
contacts=""
analysis=exit
<<<test_output>>>
getxattr01    1  TPASS  :  expected behavior: TEST_ERRNO=ENODATA(61): No data available
getxattr01    2  TPASS  :  expected behavior: TEST_ERRNO=ERANGE(34): Numerical result out of range
getxattr01    3  TPASS  :  expected behavior: TEST_ERRNO=SUCCESS(0): Success
getxattr01    4  TPASS  :  Got the right value
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=getxattr02 stime=1575293337
cmdline="getxattr02"
contacts=""
analysis=exit
<<<test_output>>>
getxattr02    1  TPASS  :  expected behavior: TEST_ERRNO=ENODATA(61): No data available
getxattr02    2  TPASS  :  expected behavior: TEST_ERRNO=ENODATA(61): No data available
getxattr02    3  TPASS  :  expected behavior: TEST_ERRNO=ENODATA(61): No data available
getxattr02    4  TPASS  :  expected behavior: TEST_ERRNO=ENODATA(61): No data available
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getxattr03 stime=1575293337
cmdline="getxattr03"
contacts=""
analysis=exit
<<<test_output>>>
getxattr03    1  TPASS  :  getxattr(2) returned correct value
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=getxattr04 stime=1575293337
cmdline="getxattr04"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with xfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
getxattr04.c:70: PASS: getxattr() succeeded to get an existing attribute

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=253 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=8
<<<test_end>>>
<<<test_start>>>
tag=getxattr05 stime=1575293590
cmdline="getxattr05"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:772: CONF: <sys/xattr.h> or <sys/acl.h> does not exist.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioctl01_02 stime=1575293590
cmdline="  test_ioctl"
contacts=""
analysis=exit
<<<test_output>>>
ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty0
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty0

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty1
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty1

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty10
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty10

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty11
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty11

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty12
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty12

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty13
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty13

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty14
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty14

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty15
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty15

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty16
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty16

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty17
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty17

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty18
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty18

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty19
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty19

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty2
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty2

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty20
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty20

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty21
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty21

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty22
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty22

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty23
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty23

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty24
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty24

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty25
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty25

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty26
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty26

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty27
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty27

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty28
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty28

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty29
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty29

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty3
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty3

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty30
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty30

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty31
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty31

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty32
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty32

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty33
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty33

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty34
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty34

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty35
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty35

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty36
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty36

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty37
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty37

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty38
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty38

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty39
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty39

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty4
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty4

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty40
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty40

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty41
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty41

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty42
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty42

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty43
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty43

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty44
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty44

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty45
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty45

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty46
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty46

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty47
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty47

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty48
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty48

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty49
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty49

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty5
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty5

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty50
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty50

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty51
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty51

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty52
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty52

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty53
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty53

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty54
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty54

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty55
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty55

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty56
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty56

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty57
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty57

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty58
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty58

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty59
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty59

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty6
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty6

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty60
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty60

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty61
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty61

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty62
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty62

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty63
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty63

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty7
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty7

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty8
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty8

ioctl01_02    0  TINFO  :  Testing ioctl01 with /dev/tty9
ioctl01     1  TPASS  :  failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
ioctl01     2  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01     3  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     4  TPASS  :  failed as expected: TEST_ERRNO=ENOTTY(25): Inappropriate ioctl for device
ioctl01     5  TPASS  :  failed as expected: TEST_ERRNO=EFAULT(14): Bad address
ioctl01_02    1  TPASS  :  ioctl01 Passed with /dev/tty9

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty0
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty0

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty1
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty1

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty10
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty10

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty11
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty11

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty12
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty12

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty13
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty13

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty14
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty14

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty15
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty15

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty16
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty16

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty17
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty17

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty18
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty18

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty19
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty19

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty2
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty2

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty20
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty20

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty21
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty21

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty22
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty22

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty23
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty23

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty24
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty24

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty25
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty25

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty26
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty26

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty27
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty27

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty28
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty28

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty29
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty29

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty3
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty3

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty30
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty30

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty31
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty31

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty32
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty32

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty33
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty33

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty34
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty34

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty35
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty35

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty36
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty36

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty37
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty37

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty38
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty38

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty39
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty39

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty4
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty4

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty40
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty40

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty41
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty41

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty42
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty42

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty43
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty43

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty44
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty44

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty45
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty45

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty46
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty46

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty47
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty47

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty48
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty48

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty49
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty49

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty5
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty5

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty50
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty50

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty51
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty51

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty52
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty52

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty53
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty53

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty54
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty54

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty55
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty55

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty56
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty56

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty57
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty57

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty58
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty58

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty59
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty59

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty6
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty6

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty60
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty60

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty61
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty61

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty62
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty62

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty63
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty63

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty7
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty7

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty8
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty8

ioctl01_02    0  TINFO  :  Testing ioctl02 with /dev/tty9
ioctl02     0  TINFO  :  termio values are set as expected
ioctl02     1  TPASS  :  TCGETA/TCSETA tests SUCCEEDED
ioctl01_02    1  TPASS  :  ioctl02 Passed with /dev/tty9

<<<execution_status>>>
initiation_status="ok"
duration=3 termination_type=exited termination_id=0 corefile=no
cutime=25 cstime=65
<<<test_end>>>
<<<test_start>>>
tag=ioctl03 stime=1575293593
cmdline="     ioctl03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl03.c:76: INFO: Available features are: 0x7133
ioctl03.c:81: PASS: TUN 0x1
ioctl03.c:81: PASS: TAP 0x2
ioctl03.c:81: PASS: NO_PI 0x1000
ioctl03.c:81: PASS: ONE_QUEUE 0x2000
ioctl03.c:81: PASS: VNET_HDR 0x4000
ioctl03.c:81: PASS: MULTI_QUEUE 0x100
ioctl03.c:81: PASS: IFF_NAPI 0x10
ioctl03.c:81: PASS: IFF_NAPI_FRAGS 0x20

Summary:
passed   8
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=ioctl04 stime=1575293593
cmdline="     ioctl04"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl04.c:26: PASS: BLKROGET returned 0
ioctl04.c:39: PASS: BLKROGET returned 1
ioctl04.c:50: PASS: Mounting RO device RW failed: EACCES (13)
ioctl04.c:61: PASS: Mounting RO device RO works

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=6 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=ioctl05 stime=1575293599
cmdline="     ioctl05"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl05.c:35: PASS: BLKGETSIZE returned 524288, BLKGETSIZE64 268435456
ioctl05.c:46: PASS: Could lseek to the end of the device
ioctl05.c:53: PASS: Got EOF when trying to read after the end of device

Summary:
passed   3
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioctl06 stime=1575293599
cmdline="     ioctl06"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl06.c:26: INFO: BLKRAGET original value 256
ioctl06.c:33: PASS: BLKRASET 0 read back correctly
ioctl06.c:33: PASS: BLKRASET 512 read back correctly
ioctl06.c:33: PASS: BLKRASET 1024 read back correctly
ioctl06.c:33: PASS: BLKRASET 1536 read back correctly
ioctl06.c:33: PASS: BLKRASET 2048 read back correctly
ioctl06.c:33: PASS: BLKRASET 2560 read back correctly
ioctl06.c:33: PASS: BLKRASET 3072 read back correctly
ioctl06.c:33: PASS: BLKRASET 3584 read back correctly
ioctl06.c:33: PASS: BLKRASET 4096 read back correctly
ioctl06.c:38: INFO: BLKRASET restoring original value 256

Summary:
passed   9
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioctl07 stime=1575293599
cmdline="     ioctl07"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl07.c:32: INFO: entropy value from ioctl: 299, proc: 299
ioctl07.c:35: PASS: entropy value within expected parameters

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=ioctl08 stime=1575293599
cmdline="     ioctl08"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with btrfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl08.c:93: PASS: ioctl(FIDEDUPERANGE) ended with SUCCESS as expected
ioctl08.c:93: PASS: ioctl(FIDEDUPERANGE) ended with SUCCESS as expected
ioctl08.c:93: PASS: ioctl(FIDEDUPERANGE) ended with EINVAL as expected

Summary:
passed   3
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=12 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=5
<<<test_end>>>
<<<test_start>>>
tag=ioctl_ns01 stime=1575293611
cmdline="ioctl_ns01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl_ns01.c:57: PASS: NS_GET_PARENT fails with EPERM
ioctl_ns01.c:57: PASS: NS_GET_PARENT fails with EPERM

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=ioctl_ns02 stime=1575293611
cmdline="ioctl_ns02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl_ns02.c:39: PASS: NS_GET_PARENT fails with EINVAL

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioctl_ns03 stime=1575293611
cmdline="ioctl_ns03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl_ns03.c:42: PASS: NS_GET_OWNER_UID fails, UTS namespace

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioctl_ns04 stime=1575293611
cmdline="ioctl_ns04"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl_ns04.c:38: PASS: NS_GET_USERNS fails with EPERM

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioctl_ns05 stime=1575293611
cmdline="ioctl_ns05"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl_ns05.c:91: PASS: child and parent are consistent
ioctl_ns05.c:50: PASS: child thinks its pid is 1

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioctl_ns06 stime=1575293611
cmdline="ioctl_ns06"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl_ns06.c:87: PASS: child and parent are consistent

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=ioctl_ns07 stime=1575293611
cmdline="ioctl_ns07"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioctl_ns07.c:33: PASS: request failed with ENOTTY
ioctl_ns07.c:33: PASS: request failed with ENOTTY
ioctl_ns07.c:33: PASS: request failed with ENOTTY
ioctl_ns07.c:33: PASS: request failed with ENOTTY

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify_init1_01 stime=1575293611
cmdline="inotify_init1_01"
contacts=""
analysis=exit
<<<test_output>>>
inotify_init1_01    1  TPASS  :  inotify_init1(O_CLOEXEC) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify_init1_02 stime=1575293612
cmdline="inotify_init1_02"
contacts=""
analysis=exit
<<<test_output>>>
inotify_init1_02    1  TPASS  :  inotify_init1(IN_NONBLOCK) PASSED
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify01 stime=1575293612
cmdline="inotify01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
inotify01.c:125: PASS: get event: wd=1 mask=04 cookie=0 len=0
inotify01.c:125: PASS: get event: wd=1 mask=20 cookie=0 len=0
inotify01.c:125: PASS: get event: wd=1 mask=01 cookie=0 len=0
inotify01.c:125: PASS: get event: wd=1 mask=10 cookie=0 len=0
inotify01.c:125: PASS: get event: wd=1 mask=20 cookie=0 len=0
inotify01.c:125: PASS: get event: wd=1 mask=02 cookie=0 len=0
inotify01.c:125: PASS: get event: wd=1 mask=08 cookie=0 len=0

Summary:
passed   7
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=inotify02 stime=1575293612
cmdline="inotify02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
inotify02.c:185: PASS: get event: wd=1 mask=40000004 cookie=0     len=0  name=""
inotify02.c:185: PASS: get event: wd=1 mask=00000100 cookie=0     len=16 name="test_file1"
inotify02.c:185: PASS: get event: wd=1 mask=00000020 cookie=0     len=16 name="test_file1"
inotify02.c:185: PASS: get event: wd=1 mask=00000008 cookie=0     len=16 name="test_file1"
inotify02.c:185: PASS: get event: wd=1 mask=00000040 cookie=347103 len=16 name="test_file1"
inotify02.c:185: PASS: get event: wd=1 mask=00000080 cookie=347103 len=16 name="test_file2"
inotify02.c:185: PASS: get event: wd=1 mask=00000800 cookie=0     len=0  name=""
inotify02.c:185: PASS: get event: wd=1 mask=00000200 cookie=0     len=16 name="test_file2"
inotify02.c:185: PASS: get event: wd=1 mask=00000800 cookie=0     len=0  name=""

Summary:
passed   9
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify03 stime=1575293612
cmdline="inotify03"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
inotify03.c:71: INFO: umount /dev/loop0
inotify03.c:102: PASS: get event: wd=1 mask=2000 cookie=0 len=0
inotify03.c:102: PASS: get event: wd=1 mask=8000 cookie=0 len=0
inotify03.c:126: PASS: inotify_rm_watch (7, 1) returned EINVAL

Summary:
passed   3
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=40 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=6
<<<test_end>>>
<<<test_start>>>
tag=inotify04 stime=1575293652
cmdline="inotify04"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
inotify04.c:163: PASS: got event: wd=1 mask=0400 cookie=0 len=0 name=""
inotify04.c:163: PASS: got event: wd=1 mask=8000 cookie=0 len=0 name=""
inotify04.c:163: PASS: got event: wd=2 mask=0004 cookie=0 len=0 name=""
inotify04.c:163: PASS: got event: wd=2 mask=0400 cookie=0 len=0 name=""
inotify04.c:163: PASS: got event: wd=2 mask=8000 cookie=0 len=0 name=""

Summary:
passed   5
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=inotify05 stime=1575293652
cmdline="inotify05"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
inotify05.c:115: PASS: get event: wd=-1 mask=4000 cookie=0 len=0

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=3 cstime=11
<<<test_end>>>
<<<test_start>>>
tag=inotify06 stime=1575293652
cmdline="inotify06"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 50m 00s
inotify06.c:84: PASS: kernel survived inotify beating

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=inotify07 stime=1575293652
cmdline="inotify07"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
inotify07.c:156: INFO: mntpoint/ovl/test_dir ino=40962
inotify07.c:166: INFO: mntpoint/ovl/test_dir ino=40962
safe_file_ops.c:359: BROK: Failed to open file 'mntpoint/ovl/test_dir/test_file' at inotify07.c:78: EIO (5)

Summary:
passed   0
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=26 termination_type=exited termination_id=2 corefile=no
cutime=0 cstime=29
<<<test_end>>>
<<<test_start>>>
tag=inotify08 stime=1575293678
cmdline="inotify08"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
inotify08.c:149: INFO: mntpoint/ovl/test_file ino=4098, dev=0:50
safe_macros.c:557: BROK: inotify08.c:155: chmod(mntpoint/ovl/test_file,0600) failed: EIO (5)

Summary:
passed   0
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=42 termination_type=exited termination_id=2 corefile=no
cutime=1 cstime=14
<<<test_end>>>
<<<test_start>>>
tag=inotify09 stime=1575293720
cmdline="inotify09"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
../../../../include/tst_fuzzy_sync.h:504: INFO: Minimum sampling period ended
../../../../include/tst_fuzzy_sync.h:328: INFO: loop = 1024, delay_bias = 0
../../../../include/tst_fuzzy_sync.h:317: INFO: start_a - start_b: { avg =   -43ns, avg_dev =    19ns, dev_ratio = 0.45 }
../../../../include/tst_fuzzy_sync.h:317: INFO: end_a - start_a  : { avg =  1433ns, avg_dev =    11ns, dev_ratio = 0.01 }
../../../../include/tst_fuzzy_sync.h:317: INFO: end_b - start_b  : { avg =  3590ns, avg_dev =    15ns, dev_ratio = 0.00 }
../../../../include/tst_fuzzy_sync.h:317: INFO: end_a - end_b    : { avg = -2199ns, avg_dev =    27ns, dev_ratio = 0.01 }
../../../../include/tst_fuzzy_sync.h:317: INFO: spins            : { avg =   995  , avg_dev =    42  , dev_ratio = 0.04 }
../../../../include/tst_fuzzy_sync.h:516: INFO: Reached deviation ratios < 0.10, introducing randomness
../../../../include/tst_fuzzy_sync.h:519: INFO: Delay range is [-1671, 662]
../../../../include/tst_fuzzy_sync.h:328: INFO: loop = 1140, delay_bias = 0
../../../../include/tst_fuzzy_sync.h:317: INFO: start_a - start_b: { avg =   -65ns, avg_dev =     6ns, dev_ratio = 0.09 }
../../../../include/tst_fuzzy_sync.h:317: INFO: end_a - start_a  : { avg =  1425ns, avg_dev =    14ns, dev_ratio = 0.01 }
../../../../include/tst_fuzzy_sync.h:317: INFO: end_b - start_b  : { avg =  3595ns, avg_dev =    12ns, dev_ratio = 0.00 }
../../../../include/tst_fuzzy_sync.h:317: INFO: end_a - end_b    : { avg = -2235ns, avg_dev =    20ns, dev_ratio = 0.01 }
../../../../include/tst_fuzzy_sync.h:317: INFO: spins            : { avg =  1039  , avg_dev =    55  , dev_ratio = 0.05 }
../../../../include/tst_fuzzy_sync.h:640: INFO: Exceeded execution loops, requesting exit
inotify09.c:89: PASS: kernel survived inotify beating

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=34 termination_type=exited termination_id=0 corefile=no
cutime=3465 cstime=2751
<<<test_end>>>
<<<test_start>>>
tag=fanotify01 stime=1575293754
cmdline="fanotify01"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify01.c:89: INFO: Test #0: inode mark events
fanotify01.c:323: PASS: got event: mask=31 pid=6691 fd=8
fanotify01.c:323: PASS: got event: mask=11 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=10 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2a pid=6691 fd=9
fanotify01.c:323: PASS: got event: mask=a pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=20 pid=6691 fd=11
fanotify01.c:323: PASS: got event: mask=b pid=6691 fd=10
fanotify01.c:323: PASS: got event: mask=9 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2 pid=6691 fd=13
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=12
fanotify01.c:89: INFO: Test #1: mount mark events
fanotify01.c:323: PASS: got event: mask=31 pid=6691 fd=8
fanotify01.c:323: PASS: got event: mask=11 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=10 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2a pid=6691 fd=9
fanotify01.c:323: PASS: got event: mask=a pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=20 pid=6691 fd=11
fanotify01.c:323: PASS: got event: mask=b pid=6691 fd=10
fanotify01.c:323: PASS: got event: mask=9 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2 pid=6691 fd=13
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=12
fanotify01.c:89: INFO: Test #2: filesystem mark events
fanotify01.c:323: PASS: got event: mask=31 pid=6691 fd=8
fanotify01.c:323: PASS: got event: mask=11 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=10 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2a pid=6691 fd=9
fanotify01.c:323: PASS: got event: mask=a pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=20 pid=6691 fd=11
fanotify01.c:323: PASS: got event: mask=b pid=6691 fd=10
fanotify01.c:323: PASS: got event: mask=9 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2 pid=6691 fd=13
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=12
fanotify01.c:89: INFO: Test #3: inode mark events (FAN_REPORT_FID)
fanotify01.c:323: PASS: got event: mask=31 pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=11 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=10 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2a pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=a pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=20 pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=b pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=9 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2 pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-1
fanotify01.c:89: INFO: Test #4: mount mark events (FAN_REPORT_FID)
fanotify01.c:323: PASS: got event: mask=31 pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=11 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=10 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2a pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=a pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=20 pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=b pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=9 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2 pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-1
fanotify01.c:89: INFO: Test #5: filesystem mark events (FAN_REPORT_FID)
fanotify01.c:323: PASS: got event: mask=31 pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=11 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=10 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2a pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=a pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=20 pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=b pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=9 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-2
fanotify01.c:323: PASS: got event: mask=2 pid=6691 fd=-1
fanotify01.c:323: PASS: got event: mask=8 pid=6691 fd=-1

Summary:
passed   72
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=19 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=fanotify02 stime=1575293773
cmdline="fanotify02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify02.c:173: PASS: got event: mask=2a pid=6708 fd=8
fanotify02.c:173: PASS: got event: mask=a pid=6708 fd=8
fanotify02.c:173: PASS: got event: mask=8 pid=6708 fd=8
fanotify02.c:173: PASS: got event: mask=31 pid=6708 fd=9
fanotify02.c:173: PASS: got event: mask=11 pid=6708 fd=9
fanotify02.c:173: PASS: got event: mask=10 pid=6708 fd=9
fanotify02.c:173: PASS: got event: mask=30 pid=6708 fd=10
fanotify02.c:173: PASS: got event: mask=10 pid=6708 fd=10

Summary:
passed   8
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fanotify03 stime=1575293773
cmdline="fanotify03"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify03.c:214: INFO: Test #0: inode mark, FAN_OPEN_PERM | FAN_ACCESS_PERM events
fanotify03.c:316: PASS: got event: mask=10000 pid=6748 fd=8
fanotify03.c:316: PASS: got event: mask=20000 pid=6748 fd=8
fanotify03.c:316: PASS: got event: mask=10000 pid=6748 fd=8
fanotify03.c:202: PASS: child exited correctly
fanotify03.c:214: INFO: Test #1: inode mark, FAN_ACCESS_PERM | FAN_OPEN_EXEC_PERM events
fanotify03.c:316: PASS: got event: mask=20000 pid=6749 fd=8
fanotify03.c:316: PASS: got event: mask=40000 pid=6749 fd=8
fanotify03.c:202: PASS: child exited correctly
fanotify03.c:214: INFO: Test #2: mount mark, FAN_OPEN_PERM | FAN_ACCESS_PERM events
fanotify03.c:316: PASS: got event: mask=10000 pid=6750 fd=8
fanotify03.c:316: PASS: got event: mask=20000 pid=6750 fd=8
fanotify03.c:316: PASS: got event: mask=10000 pid=6750 fd=8
fanotify03.c:202: PASS: child exited correctly
fanotify03.c:214: INFO: Test #3: mount mark, FAN_ACCESS_PERM | FAN_OPEN_EXEC_PERM events
fanotify03.c:316: PASS: got event: mask=20000 pid=6751 fd=8
fanotify03.c:316: PASS: got event: mask=40000 pid=6751 fd=8
fanotify03.c:202: PASS: child exited correctly
fanotify03.c:214: INFO: Test #4: filesystem mark, FAN_OPEN_PERM | FAN_ACCESS_PERM events
fanotify03.c:316: PASS: got event: mask=10000 pid=6752 fd=8
fanotify03.c:316: PASS: got event: mask=20000 pid=6752 fd=8
fanotify03.c:316: PASS: got event: mask=10000 pid=6752 fd=8
fanotify03.c:202: PASS: child exited correctly
fanotify03.c:214: INFO: Test #5: filesystem mark, FAN_ACCESS_PERM | FAN_OPEN_EXEC_PERM events
fanotify03.c:316: PASS: got event: mask=20000 pid=6753 fd=8
fanotify03.c:316: PASS: got event: mask=40000 pid=6753 fd=8
fanotify03.c:202: PASS: child exited correctly

Summary:
passed   21
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=16 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=5
<<<test_end>>>
<<<test_start>>>
tag=fanotify04 stime=1575293789
cmdline="fanotify04"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify04.c:71: PASS: fanotify_mark (7, FAN_MARK_ADD | FAN_MARK_ONLYDIR, FAN_OPEN, AT_FDCWD, '.') succeeded
fanotify04.c:71: PASS: fanotify_mark (7, FAN_MARK_ADD | FAN_MARK_ONLYDIR, FAN_OPEN, AT_FDCWD, 'fname_6773') failed
fanotify04.c:71: PASS: fanotify_mark (7, FAN_MARK_ADD | FAN_MARK_DONT_FOLLOW, FAN_OPEN, AT_FDCWD, 'symlink_6773') succeeded
fanotify04.c:168: PASS: No event as expected
fanotify04.c:71: PASS: fanotify_mark (7, FAN_MARK_ADD | 0, FAN_OPEN, AT_FDCWD, 'symlink_6773') succeeded
fanotify04.c:132: PASS: event generated properly for type 100000
fanotify04.c:132: PASS: event generated properly for type 100000
fanotify04.c:132: PASS: event generated properly for type 40000
fanotify04.c:168: PASS: No event as expected

Summary:
passed   9
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fanotify05 stime=1575293789
cmdline="fanotify05"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify05.c:99: PASS: got event: mask=4000 pid=6807 fd=-1

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=13 termination_type=exited termination_id=0 corefile=no
cutime=4 cstime=174
<<<test_end>>>
<<<test_start>>>
tag=fanotify06 stime=1575293802
cmdline="fanotify06"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify06.c:169: INFO: Test #0: Fanotify merge mount mark
fanotify06.c:147: PASS: group 0 got event: mask 2 pid=6850 fd=16
fanotify06.c:147: PASS: group 1 got event: mask 2 pid=6850 fd=16
fanotify06.c:147: PASS: group 2 got event: mask 2 pid=6850 fd=16
fanotify06.c:230: PASS: group 3 got no event
fanotify06.c:230: PASS: group 4 got no event
fanotify06.c:230: PASS: group 5 got no event
fanotify06.c:230: PASS: group 6 got no event
fanotify06.c:230: PASS: group 7 got no event
fanotify06.c:230: PASS: group 8 got no event
fanotify06.c:169: INFO: Test #1: Fanotify merge overlayfs mount mark
fanotify06.c:147: PASS: group 0 got event: mask 2 pid=6850 fd=16
fanotify06.c:147: PASS: group 1 got event: mask 2 pid=6850 fd=16
fanotify06.c:147: PASS: group 2 got event: mask 2 pid=6850 fd=16
fanotify06.c:230: PASS: group 3 got no event
fanotify06.c:230: PASS: group 4 got no event
fanotify06.c:230: PASS: group 5 got no event
fanotify06.c:230: PASS: group 6 got no event
fanotify06.c:230: PASS: group 7 got no event
fanotify06.c:230: PASS: group 8 got no event

Summary:
passed   18
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=9 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=6
<<<test_end>>>
<<<test_start>>>
tag=fanotify07 stime=1575293811
cmdline="fanotify07"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify07.c:180: PASS: second instance destroyed successfully
fanotify07.c:193: PASS: all children exited successfully

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=2
<<<test_end>>>
<<<test_start>>>
tag=fanotify08 stime=1575293812
cmdline="fanotify08"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify08.c:38: PASS: not set close_on_exec
fanotify08.c:38: PASS: set close_on_exec

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fanotify09 stime=1575293812
cmdline="fanotify09"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify09.c:161: INFO: Test #0: Events on children with both inode and mount marks
fanotify09.c:150: PASS: group 0 got event: mask 2 pid=6884 fd=10 path=/fs/vda/tmpdir/ltp-rD8LOpvacC/FaCOE4/mntpoint/tfile_6884
fanotify09.c:234: PASS: group 1 got no event
fanotify09.c:234: PASS: group 2 got no event
fanotify09.c:161: INFO: Test #1: Events on children and subdirs with both inode and mount marks
fanotify09.c:150: PASS: group 0 got event: mask 2 pid=6884 fd=10 path=/fs/vda/tmpdir/ltp-rD8LOpvacC/FaCOE4/mntpoint/tfile_6884
fanotify09.c:150: PASS: group 0 got event: mask 10 pid=6884 fd=11 path=/fs/vda/tmpdir/ltp-rD8LOpvacC/FaCOE4/mntpoint/testdir
fanotify09.c:234: PASS: group 1 got no event
fanotify09.c:234: PASS: group 2 got no event

Summary:
passed   7
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fanotify10 stime=1575293812
cmdline="fanotify10"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify10.c:331: INFO: Test #0: ignore mount events created on a specific file
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6910 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6910 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6910 fd=16
fanotify10.c:398: PASS: group 0 (prio 1) with FAN_MARK_MOUNT and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 1 (prio 1) with FAN_MARK_MOUNT and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 2 (prio 1) with FAN_MARK_MOUNT and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 0 (prio 2) with FAN_MARK_MOUNT and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 1 (prio 2) with FAN_MARK_MOUNT and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 2 (prio 2) with FAN_MARK_MOUNT and FAN_MARK_INODE ignore mask got no event
fanotify10.c:331: INFO: Test #1: ignore exec mount events created on a specific file
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6911 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6911 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6911 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1000 pid=6911 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1000 pid=6911 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1000 pid=6911 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1000 pid=6911 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1000 pid=6911 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1000 pid=6911 fd=16
fanotify10.c:331: INFO: Test #2: don't ignore mount events created on another file
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6912 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6912 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6912 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6912 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6912 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6912 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6912 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6912 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6912 fd=16
fanotify10.c:331: INFO: Test #3: don't ignore exec mount events created on another file
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6913 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6913 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6913 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6913 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6913 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6913 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6913 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6913 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6913 fd=16
fanotify10.c:331: INFO: Test #4: ignore inode events created on a specific mount point
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6914 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6914 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6914 fd=16
fanotify10.c:398: PASS: group 0 (prio 1) with FAN_MARK_INODE and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 1 (prio 1) with FAN_MARK_INODE and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 2 (prio 1) with FAN_MARK_INODE and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 0 (prio 2) with FAN_MARK_INODE and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 1 (prio 2) with FAN_MARK_INODE and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 2 (prio 2) with FAN_MARK_INODE and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:331: INFO: Test #5: ignore exec inode events created on a specific mount point
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6915 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6915 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6915 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1000 pid=6915 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1000 pid=6915 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1000 pid=6915 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1000 pid=6915 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1000 pid=6915 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1000 pid=6915 fd=16
fanotify10.c:331: INFO: Test #6: don't ignore inode events created on another mount point
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6916 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6916 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6916 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6916 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6916 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6916 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6916 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6916 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6916 fd=16
fanotify10.c:331: INFO: Test #7: don't ignore exec inode events created on another mount point
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6917 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6917 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6917 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6917 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6917 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6917 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6917 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6917 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6917 fd=16
fanotify10.c:331: INFO: Test #8: ignore fs events created on a specific file
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6919 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6919 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6919 fd=16
fanotify10.c:398: PASS: group 0 (prio 1) with FAN_MARK_FILESYSTEM and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 1 (prio 1) with FAN_MARK_FILESYSTEM and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 2 (prio 1) with FAN_MARK_FILESYSTEM and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 0 (prio 2) with FAN_MARK_FILESYSTEM and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 1 (prio 2) with FAN_MARK_FILESYSTEM and FAN_MARK_INODE ignore mask got no event
fanotify10.c:398: PASS: group 2 (prio 2) with FAN_MARK_FILESYSTEM and FAN_MARK_INODE ignore mask got no event
fanotify10.c:331: INFO: Test #9: ignore exec fs events created on a specific file
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6922 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6922 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6922 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1000 pid=6922 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1000 pid=6922 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1000 pid=6922 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1000 pid=6922 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1000 pid=6922 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1000 pid=6922 fd=16
fanotify10.c:331: INFO: Test #10: don't ignore mount events created on another file
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6923 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6923 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6923 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6923 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6923 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6923 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6923 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6923 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6923 fd=16
fanotify10.c:331: INFO: Test #11: don't ignore exec mount events created on another file
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6924 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6924 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6924 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6924 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6924 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6924 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6924 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6924 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6924 fd=16
fanotify10.c:331: INFO: Test #12: ignore fs events created on a specific mount point
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6925 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6925 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6925 fd=16
fanotify10.c:398: PASS: group 0 (prio 1) with FAN_MARK_FILESYSTEM and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 1 (prio 1) with FAN_MARK_FILESYSTEM and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 2 (prio 1) with FAN_MARK_FILESYSTEM and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 0 (prio 2) with FAN_MARK_FILESYSTEM and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 1 (prio 2) with FAN_MARK_FILESYSTEM and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:398: PASS: group 2 (prio 2) with FAN_MARK_FILESYSTEM and FAN_MARK_MOUNT ignore mask got no event
fanotify10.c:331: INFO: Test #13: ignore exec fs events created on a specific mount point
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6926 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6926 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6926 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1000 pid=6926 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1000 pid=6926 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1000 pid=6926 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1000 pid=6926 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1000 pid=6926 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1000 pid=6926 fd=16
fanotify10.c:331: INFO: Test #14: don't ignore fs events created on another mount point
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6927 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6927 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6927 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6927 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6927 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6927 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 20 pid=6927 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 20 pid=6927 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 20 pid=6927 fd=16
fanotify10.c:331: INFO: Test #15: don't ignore exec fs events created on another mount point
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6928 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6928 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6928 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6928 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6928 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6928 fd=16
fanotify10.c:292: PASS: group 0 got event: mask 1020 pid=6928 fd=16
fanotify10.c:292: PASS: group 1 got event: mask 1020 pid=6928 fd=16
fanotify10.c:292: PASS: group 2 got event: mask 1020 pid=6928 fd=16

Summary:
passed   144
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=6 termination_type=exited termination_id=0 corefile=no
cutime=2 cstime=6
<<<test_end>>>
<<<test_start>>>
tag=fanotify11 stime=1575293818
cmdline="fanotify11"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify11.c:66: INFO: Test #0: without FAN_REPORT_TID: tgid=6933, tid=0, event.pid=0
fanotify11.c:91: PASS: event.pid == tgid
fanotify11.c:66: INFO: Test #1: with FAN_REPORT_TID: tgid=6933, tid=6934, event.pid=6933
fanotify11.c:89: PASS: event.pid == tid

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=fanotify12 stime=1575293818
cmdline="fanotify12"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify12.c:137: INFO: Test #0: inode mark, FAN_OPEN events
fanotify12.c:239: PASS: Received event: mask=20, pid=6939, fd=8
fanotify12.c:239: PASS: Received event: mask=20, pid=6939, fd=9
fanotify12.c:137: INFO: Test #1: inode mark, FAN_OPEN_EXEC events
fanotify12.c:239: PASS: Received event: mask=1000, pid=6940, fd=8
fanotify12.c:137: INFO: Test #2: inode mark, FAN_OPEN | FAN_OPEN_EXEC events
fanotify12.c:239: PASS: Received event: mask=20, pid=6941, fd=8
fanotify12.c:239: PASS: Received event: mask=1020, pid=6941, fd=9
fanotify12.c:137: INFO: Test #3: inode mark, FAN_OPEN events, ignore FAN_OPEN_EXEC
fanotify12.c:239: PASS: Received event: mask=20, pid=6942, fd=8
fanotify12.c:239: PASS: Received event: mask=20, pid=6942, fd=9
fanotify12.c:137: INFO: Test #4: inode mark, FAN_OPEN_EXEC events, ignore FAN_OPEN
fanotify12.c:239: PASS: Received event: mask=1000, pid=6943, fd=8
fanotify12.c:137: INFO: Test #5: inode mark, FAN_OPEN | FAN_OPEN_EXEC events, ignore FAN_OPEN_EXEC
fanotify12.c:239: PASS: Received event: mask=20, pid=6944, fd=8
fanotify12.c:239: PASS: Received event: mask=20, pid=6944, fd=9

Summary:
passed   10
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=fanotify13 stime=1575293818
cmdline="fanotify13"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_supported_fs_types.c:60: INFO: Kernel supports ext2
tst_supported_fs_types.c:44: INFO: mkfs.ext2 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext3
tst_supported_fs_types.c:44: INFO: mkfs.ext3 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext4
tst_supported_fs_types.c:44: INFO: mkfs.ext4 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports xfs
tst_supported_fs_types.c:44: INFO: mkfs.xfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports btrfs
tst_supported_fs_types.c:44: INFO: mkfs.btrfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports vfat
tst_supported_fs_types.c:44: INFO: mkfs.vfat does exist
tst_supported_fs_types.c:92: INFO: FUSE does support exfat
tst_supported_fs_types.c:44: INFO: mkfs.exfat does exist
tst_supported_fs_types.c:92: INFO: FUSE does support ntfs
tst_supported_fs_types.c:44: INFO: mkfs.ntfs does exist
tst_test.c:1179: INFO: Testing on ext2
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify13.c:168: INFO: Test #0: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.934edd480000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.2a723af30000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #1: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.934edd480000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.2a723af30000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=6990, fid=cf314d1a.1157108a.a8d13c550000b001 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #2: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.934edd480000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.2a723af30000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #3: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.934edd480000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.2a723af30000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=6990, fid=cf314d1a.1157108a.a8d13c550000b001 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #4: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.934edd480000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.2a723af30000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #5: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.934edd480000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=6990, fid=cf314d1a.1157108a.2a723af30000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=6990, fid=cf314d1a.1157108a.a8d13c550000b001 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
tst_test.c:1179: INFO: Testing on ext3
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext3 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify13.c:168: INFO: Test #0: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.688efd6300001801 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.3136f77b00001802 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #1: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.688efd6300001801 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.3136f77b00001802 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7006, fid=df935c14.9bb3daba.fe7a88f40000f001 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #2: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.688efd6300001801 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.3136f77b00001802 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #3: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.688efd6300001801 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.3136f77b00001802 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7006, fid=df935c14.9bb3daba.fe7a88f40000f001 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #4: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.688efd6300001801 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.3136f77b00001802 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #5: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.688efd6300001801 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7006, fid=df935c14.9bb3daba.3136f77b00001802 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7006, fid=df935c14.9bb3daba.fe7a88f40000f001 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
tst_test.c:1179: INFO: Testing on ext4
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext4 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify13.c:168: INFO: Test #0: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.8acda15c0000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.25c911c80000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #1: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.8acda15c0000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.25c911c80000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7022, fid=23d47383.487e6392.7c8f4c2700008001 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #2: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.8acda15c0000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.25c911c80000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #3: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.8acda15c0000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.25c911c80000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7022, fid=23d47383.487e6392.7c8f4c2700008001 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #4: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.8acda15c0000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.25c911c80000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #5: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.8acda15c0000000c values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7022, fid=23d47383.487e6392.25c911c80000000d values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7022, fid=23d47383.487e6392.7c8f4c2700008001 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
tst_test.c:1179: INFO: Testing on xfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with xfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify13.c:168: INFO: Test #0: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.63 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.64 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #1: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.63 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.64 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7051, fid=700.0.65 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #2: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.63 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.64 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #3: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.63 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.64 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7051, fid=700.0.65 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #4: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.63 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.64 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #5: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.63 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7051, fid=700.0.64 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7051, fid=700.0.65 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
tst_test.c:1179: INFO: Testing on btrfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with btrfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify13.c:168: INFO: Test #0: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.101 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.102 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #1: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.101 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.102 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7089, fid=51fb15aa.157b1364.103 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #2: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.101 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.102 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #3: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.101 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.102 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7089, fid=51fb15aa.157b1364.103 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #4: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.101 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.102 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #5: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.101 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7089, fid=51fb15aa.157b1364.102 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7089, fid=51fb15aa.157b1364.103 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
tst_test.c:1179: INFO: Testing on vfat
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with vfat opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify13.c:168: INFO: Test #0: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000075 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000076 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #1: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000075 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000076 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7097, fid=700.0.5de5138a00000077 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #2: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000075 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000076 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #3: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000075 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000076 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7097, fid=700.0.5de5138a00000077 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #4: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000075 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000076 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:168: INFO: Test #5: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000075 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=30, pid=7097, fid=700.0.5de5138b00000076 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
fanotify13.c:280: PASS: got event: mask=40000030, pid=7097, fid=700.0.5de5138a00000077 values returned in event match those returned in statfs(2) and name_to_handle_at(2)
tst_test.c:1179: INFO: Testing on exfat
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with exfat opts='' extra opts=''
safe_macros.c:743: INFO: Trying FUSE...
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify13.c:168: INFO: Test #0: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type exfat
fanotify13.c:168: INFO: Test #1: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type exfat
fanotify13.c:168: INFO: Test #2: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type exfat
fanotify13.c:168: INFO: Test #3: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type exfat
fanotify13.c:168: INFO: Test #4: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type exfat
fanotify13.c:168: INFO: Test #5: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type exfat
tst_test.c:1179: INFO: Testing on ntfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ntfs opts='' extra opts=''
The partition start sector was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
The number of sectors per track was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
The number of heads was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
To boot from a device, Windows needs the 'partition start sector', the 'sectors per track' and the 'number of heads' to be set.
Windows will not be able to boot from this device.
safe_macros.c:743: INFO: Trying FUSE...
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify13.c:168: INFO: Test #0: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type ntfs
fanotify13.c:168: INFO: Test #1: FAN_REPORT_FID with mark flag: FAN_MARK_INODE
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type ntfs
fanotify13.c:168: INFO: Test #2: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type ntfs
fanotify13.c:168: INFO: Test #3: FAN_REPORT_FID with mark flag: FAN_MARK_MOUNT
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type ntfs
fanotify13.c:168: INFO: Test #4: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type ntfs
fanotify13.c:168: INFO: Test #5: FAN_REPORT_FID with mark flag: FAN_MARK_FILESYSTEM
fanotify13.c:138: CONF: FAN_REPORT_FID not supported on filesystem type ntfs

Summary:
passed   90
failed   0
skipped  12
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=29 termination_type=exited termination_id=0 corefile=no
cutime=13 cstime=557
<<<test_end>>>
<<<test_start>>>
tag=fanotify14 stime=1575293847
cmdline="fanotify14"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_supported_fs_types.c:60: INFO: Kernel supports ext2
tst_supported_fs_types.c:44: INFO: mkfs.ext2 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext3
tst_supported_fs_types.c:44: INFO: mkfs.ext3 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext4
tst_supported_fs_types.c:44: INFO: mkfs.ext4 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports xfs
tst_supported_fs_types.c:44: INFO: mkfs.xfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports btrfs
tst_supported_fs_types.c:44: INFO: mkfs.btrfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports vfat
tst_supported_fs_types.c:44: INFO: mkfs.vfat does exist
tst_supported_fs_types.c:92: INFO: FUSE does support exfat
tst_supported_fs_types.c:44: INFO: mkfs.exfat does exist
tst_supported_fs_types.c:92: INFO: FUSE does support ntfs
tst_supported_fs_types.c:44: INFO: mkfs.ntfs does exist
tst_test.c:1179: INFO: Testing on ext2
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(204, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(208, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 0, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 10, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
tst_test.c:1179: INFO: Testing on ext3
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext3 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(204, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(208, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 0, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 10, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
tst_test.c:1179: INFO: Testing on ext4
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext4 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(204, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(208, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 0, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 10, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
tst_test.c:1179: INFO: Testing on xfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with xfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(204, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(208, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 0, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 10, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
tst_test.c:1179: INFO: Testing on btrfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with btrfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(204, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(208, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 0, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 10, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
tst_test.c:1179: INFO: Testing on vfat
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with vfat opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(204, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(208, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 0, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 10, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
tst_test.c:1179: INFO: Testing on exfat
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with exfat opts='' extra opts=''
safe_macros.c:743: INFO: Trying FUSE...
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(204, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(208, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 0, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 10, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
tst_test.c:1179: INFO: Testing on ntfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ntfs opts='' extra opts=''
The partition start sector was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
The number of sectors per track was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
The number of heads was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
To boot from a device, Windows needs the 'partition start sector', the 'sectors per track' and the 'number of heads' to be set.
Windows will not be able to boot from this device.
safe_macros.c:743: INFO: Trying FUSE...
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(204, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:75: PASS: fanotify_fd=-1, fanotify_init(208, O_RDONLY) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 0, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected
fanotify14.c:117: PASS: ret=-1, fanotify_mark(7, FAN_MARK_ADD | 10, fc4, AT_FDCWD, mntpoint/file1) failed with error EINVAL as expected

Summary:
passed   32
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=7 termination_type=exited termination_id=0 corefile=no
cutime=9 cstime=207
<<<test_end>>>
<<<test_start>>>
tag=fanotify15 stime=1575293854
cmdline="fanotify15"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_supported_fs_types.c:60: INFO: Kernel supports ext2
tst_supported_fs_types.c:44: INFO: mkfs.ext2 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext3
tst_supported_fs_types.c:44: INFO: mkfs.ext3 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext4
tst_supported_fs_types.c:44: INFO: mkfs.ext4 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports xfs
tst_supported_fs_types.c:44: INFO: mkfs.xfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports btrfs
tst_supported_fs_types.c:44: INFO: mkfs.btrfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports vfat
tst_supported_fs_types.c:44: INFO: mkfs.vfat does exist
tst_supported_fs_types.c:92: INFO: FUSE does support exfat
tst_supported_fs_types.c:44: INFO: mkfs.exfat does exist
tst_supported_fs_types.c:92: INFO: FUSE does support ntfs
tst_supported_fs_types.c:44: INFO: mkfs.ntfs does exist
tst_test.c:1179: INFO: Testing on ext2
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify15.c:198: PASS: Got event: mask=3c0, pid=7307, fid=8ccb0af1.4954811e.72e162e300008001 values
fanotify15.c:198: PASS: Got event: mask=404, pid=7307, fid=8ccb0af1.4954811e.7c1783a200008002 values
fanotify15.c:198: PASS: Got event: mask=400003c0, pid=7307, fid=8ccb0af1.4954811e.72e162e300008001 values
fanotify15.c:198: PASS: Got event: mask=40000400, pid=7307, fid=8ccb0af1.4954811e.d98bc74a00008002 values
tst_test.c:1179: INFO: Testing on ext3
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext3 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify15.c:198: PASS: Got event: mask=3c0, pid=7316, fid=c9b057d0.defe2bb3.884786270000b001 values
fanotify15.c:198: PASS: Got event: mask=404, pid=7316, fid=c9b057d0.defe2bb3.7d6404250000b002 values
fanotify15.c:198: PASS: Got event: mask=400003c0, pid=7316, fid=c9b057d0.defe2bb3.884786270000b001 values
fanotify15.c:198: PASS: Got event: mask=40000400, pid=7316, fid=c9b057d0.defe2bb3.8c9025820000b002 values
tst_test.c:1179: INFO: Testing on ext4
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext4 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify15.c:198: PASS: Got event: mask=3c0, pid=7322, fid=c34f08.20cfb804.e4098ea600008001 values
fanotify15.c:198: PASS: Got event: mask=404, pid=7322, fid=c34f08.20cfb804.2e9c701b00008002 values
fanotify15.c:198: PASS: Got event: mask=400003c0, pid=7322, fid=c34f08.20cfb804.e4098ea600008001 values
fanotify15.c:198: PASS: Got event: mask=40000400, pid=7322, fid=c34f08.20cfb804.519df5ad00008002 values
tst_test.c:1179: INFO: Testing on xfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with xfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify15.c:198: PASS: Got event: mask=3c0, pid=7333, fid=700.0.63 values
fanotify15.c:198: PASS: Got event: mask=404, pid=7333, fid=700.0.64 values
fanotify15.c:198: PASS: Got event: mask=400003c0, pid=7333, fid=700.0.63 values
fanotify15.c:198: PASS: Got event: mask=40000400, pid=7333, fid=700.0.20060 values
tst_test.c:1179: INFO: Testing on btrfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with btrfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify15.c:198: PASS: Got event: mask=3c0, pid=7362, fid=8cc35814.16878e47.101 values
fanotify15.c:198: PASS: Got event: mask=404, pid=7362, fid=8cc35814.16878e47.102 values
fanotify15.c:198: PASS: Got event: mask=400003c0, pid=7362, fid=8cc35814.16878e47.101 values
fanotify15.c:198: PASS: Got event: mask=40000400, pid=7362, fid=8cc35814.16878e47.103 values
tst_test.c:1179: INFO: Testing on vfat
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with vfat opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify15.c:198: PASS: Got event: mask=3c0, pid=7367, fid=700.0.5de5139e00000079 values
fanotify15.c:198: PASS: Got event: mask=404, pid=7367, fid=700.0.5de5139f0000007a values
fanotify15.c:198: PASS: Got event: mask=400003c0, pid=7367, fid=700.0.5de5139e00000079 values
fanotify15.c:198: PASS: Got event: mask=40000400, pid=7367, fid=700.0.5de5139e0000007b values
tst_test.c:1179: INFO: Testing on exfat
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with exfat opts='' extra opts=''
safe_macros.c:743: INFO: Trying FUSE...
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify15.c:66: CONF: FAN_REPORT_FID not supported on exfat filesystem
tst_test.c:1179: INFO: Testing on ntfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ntfs opts='' extra opts=''
The partition start sector was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
The number of sectors per track was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
The number of heads was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
To boot from a device, Windows needs the 'partition start sector', the 'sectors per track' and the 'number of heads' to be set.
Windows will not be able to boot from this device.
safe_macros.c:743: INFO: Trying FUSE...
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
fanotify15.c:66: CONF: FAN_REPORT_FID not supported on ntfs filesystem

Summary:
passed   24
failed   0
skipped  2
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=6 termination_type=exited termination_id=0 corefile=no
cutime=12 cstime=214
<<<test_end>>>
<<<test_start>>>
tag=ioperm01 stime=1575293860
cmdline="ioperm01"
contacts=""
analysis=exit
<<<test_output>>>
ioperm01    1  TPASS  :  ioperm() passed for port address 1021, returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=ioperm02 stime=1575293860
cmdline="ioperm02"
contacts=""
analysis=exit
<<<test_output>>>
ioperm02    1  TPASS  :  Expected failure for Invalid I/O address, errno: 22
ioperm02    2  TPASS  :  Expected failure for Non super-user, errno: 1
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=iopl01 stime=1575293861
cmdline="iopl01"
contacts=""
analysis=exit
<<<test_output>>>
iopl01      1  TPASS  :  iopl() passed for level 0, returned 0
iopl01      2  TPASS  :  iopl() passed for level 1, returned 0
iopl01      3  TPASS  :  iopl() passed for level 2, returned 0
iopl01      4  TPASS  :  iopl() passed for level 3, returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=iopl02 stime=1575293861
cmdline="iopl02"
contacts=""
analysis=exit
<<<test_output>>>
iopl02      1  TPASS  :  Expected failure for Invalid privilege level, errno: 22
iopl02      2  TPASS  :  Expected failure for Non super-user, errno: 1
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioprio_get01 stime=1575293861
cmdline="ioprio_get01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioprio_get01.c:42: PASS: ioprio_get returned class NONE prio 4

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=ioprio_set01 stime=1575293861
cmdline="ioprio_set01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioprio_set01.c:66: INFO: ioprio_get returned class NONE prio 4
ioprio.h:91: PASS: ioprio_set new class BEST-EFFORT, new prio 5
ioprio.h:91: PASS: ioprio_set new class BEST-EFFORT, new prio 3

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioprio_set02 stime=1575293861
cmdline="ioprio_set02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioprio_set02.c:36: PASS: tested all prios in class BEST-EFFORT
ioprio_set02.c:52: PASS: tested all prios in class IDLE
ioprio.h:91: PASS: ioprio_set new class NONE, new prio 0

Summary:
passed   3
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=ioprio_set03 stime=1575293861
cmdline="ioprio_set03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
ioprio.h:91: PASS: ioprio_set new class BEST-EFFORT, new prio 4
ioprio_set03.c:34: PASS: returned correct error for wrong prio: EINVAL (22)
ioprio_set03.c:48: INFO: tested illegal priority with class NONE
ioprio_set03.c:50: PASS: returned correct error for wrong prio: EINVAL (22)

Summary:
passed   3
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=io_cancel01 stime=1575293861
cmdline="io_cancel01"
contacts=""
analysis=exit
<<<test_output>>>
io_cancel01    1  TPASS  :  expected failure - returned value = -14 : Bad address
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=io_destroy01 stime=1575293861
cmdline="io_destroy01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
io_destroy01.c:37: PASS: io_destroy() failed as expected, returned -EINVAL

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=io_getevents01 stime=1575293861
cmdline="io_getevents01"
contacts=""
analysis=exit
<<<test_output>>>
io_getevents01    1  TPASS  :  expected failure - returned value = -22 : Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=io_setup01 stime=1575293861
cmdline="io_setup01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
io_setup01.c:62: PASS: io_setup() passed as expected
io_setup01.c:43: PASS: io_setup() failed as expected, returned -EINVAL
io_setup01.c:43: PASS: io_setup() failed as expected, returned -EINVAL
io_setup01.c:43: PASS: io_setup() failed as expected, returned -EFAULT
io_setup01.c:43: PASS: io_setup() failed as expected, returned -EAGAIN/EWOULDBLOCK

Summary:
passed   5
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=io_submit01 stime=1575293861
cmdline="io_submit01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
io_submit01.c:112: PASS: io_submit() with invalid ctx failed with EINVAL
io_submit01.c:112: PASS: io_submit() with invalid nr failed with EINVAL
io_submit01.c:112: PASS: io_submit() with invalid iocbpp pointer failed with EFAULT
io_submit01.c:112: PASS: io_submit() with NULL iocb pointers failed with EFAULT
io_submit01.c:112: PASS: io_submit() with invalid fd failed with EBADF
io_submit01.c:112: PASS: io_submit() with readonly fd for write failed with EBADF
io_submit01.c:112: PASS: io_submit() with writeonly fd for read failed with EBADF
io_submit01.c:112: PASS: io_submit() with zero buf size failed with SUCCESS
io_submit01.c:112: PASS: io_submit() with zero nr failed with SUCCESS

Summary:
passed   9
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=keyctl01 stime=1575293861
cmdline="keyctl01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
keyctl01.c:27: PASS: KEYCTL_GET_KEYRING_ID succeeded
keyctl01.c:48: PASS: KEYCTL_REVOKE failed as expected: ENOKEY (126)

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=keyctl02 stime=1575293861
cmdline="keyctl02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
keyctl02.c:118: INFO: waiting for key gc took: 100 ms
keyctl02.c:119: PASS: Bug not reproduced

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=3 termination_type=exited termination_id=0 corefile=no
cutime=27 cstime=210
<<<test_end>>>
<<<test_start>>>
tag=keyctl03 stime=1575293864
cmdline="keyctl03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
keyctl03.c:39: PASS: Bug not reproduced

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=keyctl04 stime=1575293864
cmdline="keyctl04"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
keyctl04.c:39: PASS: thread keyring was not leaked

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=keyctl05 stime=1575293864
cmdline="keyctl05"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
keyctl05.c:123: INFO: Try to update the 'asymmetric' key...
keyctl05.c:136: PASS: updating 'asymmetric' key expectedly failed with EOPNOTSUPP
keyctl05.c:92: CONF: kernel doesn't support key type 'dns_resolver'
keyctl05.c:171: INFO: Try to update the 'user' key...
keyctl05.c:180: PASS: didn't crash while racing to update 'user' key

Summary:
passed   2
failed   0
skipped  1
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=2
<<<test_end>>>
<<<test_start>>>
tag=keyctl06 stime=1575293864
cmdline="keyctl06"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
keyctl06.c:60: PASS: KEYCTL_READ returned full count but didn't overrun the buffer

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=keyctl07 stime=1575293864
cmdline="keyctl07"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
keyctl07.c:62: INFO: trying to read from the negative key...
keyctl07.c:73: PASS: KEYCTL_READ on negative key expectedly failed with ENOKEY
keyctl07.c:88: PASS: didn't crash while reading from negative key

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=keyctl08 stime=1575293864
cmdline="keyctl08"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
keyctl08.c:22: PASS: Denied access to .builtin_trusted_keys

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kcmp01 stime=1575293864
cmdline="kcmp01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
kcmp01.c:86: PASS: kcmp() returned the expected value
kcmp01.c:86: PASS: kcmp() returned the expected value
kcmp01.c:86: PASS: kcmp() returned the expected value
kcmp01.c:86: PASS: kcmp() returned the expected value
kcmp01.c:86: PASS: kcmp() returned the expected value

Summary:
passed   5
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kcmp02 stime=1575293864
cmdline="kcmp02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
kcmp02.c:83: PASS: kcmp() returned the expected value: ESRCH (3)
kcmp02.c:83: PASS: kcmp() returned the expected value: EINVAL (22)
kcmp02.c:83: PASS: kcmp() returned the expected value: EINVAL (22)
kcmp02.c:83: PASS: kcmp() returned the expected value: EINVAL (22)
kcmp02.c:83: PASS: kcmp() returned the expected value: EINVAL (22)
kcmp02.c:83: PASS: kcmp() returned the expected value: EBADF (9)

Summary:
passed   6
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=kcmp03 stime=1575293864
cmdline="kcmp03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
kcmp03.c:64: PASS: kcmp() returned the expected value
kcmp03.c:64: PASS: kcmp() returned the expected value
kcmp03.c:64: PASS: kcmp() returned the expected value
kcmp03.c:64: PASS: kcmp() returned the expected value

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kill01 stime=1575293864
cmdline="kill01"
contacts=""
analysis=exit
<<<test_output>>>
kill01      1  TPASS  :  received expected signal 9
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kill02 stime=1575293864
cmdline="kill02"
contacts=""
analysis=exit
<<<test_output>>>
kill02      1  TPASS  :  The signal was sent to all processes in the process group.
kill02      2  TPASS  :  The signal was not sent to selective processes that were not in the process group.
<<<execution_status>>>
initiation_status="ok"
duration=10 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kill03 stime=1575293874
cmdline="kill03"
contacts=""
analysis=exit
<<<test_output>>>
kill03      1  TPASS  :  errno set to 22 : Invalid argument, as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=kill04 stime=1575293874
cmdline="kill04"
contacts=""
analysis=exit
<<<test_output>>>
kill04      1  TPASS  :  errno set to 3 : No such process, as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kill05 stime=1575293874
cmdline="kill05"
contacts=""
analysis=exit
<<<test_output>>>
kill failed with EPERM
kill05      1  TPASS  :  received expected errno(EPERM)
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kill06 stime=1575293875
cmdline="kill06"
contacts=""
analysis=exit
<<<test_output>>>
kill06      1  TPASS  :  received expected signal 9
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kill07 stime=1575293875
cmdline="kill07"
contacts=""
analysis=exit
<<<test_output>>>
kill07      0  TINFO  :  received expected signal 9
kill07      1  TPASS  :  Did not catch signal as expected
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=kill08 stime=1575293876
cmdline="kill08"
contacts=""
analysis=exit
<<<test_output>>>
kill08      1  TPASS  :  received expected signal 9
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kill09 stime=1575293876
cmdline="kill09"
contacts=""
analysis=exit
<<<test_output>>>
kill09      1  TPASS  :  kill(22870, SIGKILL) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kill10 stime=1575293876
cmdline="kill10"
contacts=""
analysis=exit
<<<test_output>>>
22872: All 10 children reported in
22873: All 10 children reported in
kill10      1  TPASS  :  All 2 pgrps received their signals
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=kill11 stime=1575293877
cmdline="kill11"
contacts=""
analysis=exit
<<<test_output>>>
kill11      0  TINFO  :  Adjusting RLIMIT_CORE to 1048576
kill11      1  TPASS  :  signal SIGHUP          
kill11      2  TPASS  :  signal SIGINT          
kill11      3  TPASS  :  signal SIGQUIT          dumped core
kill11      4  TPASS  :  signal SIGILL           dumped core
kill11      5  TPASS  :  signal SIGTRAP          dumped core
kill11      6  TPASS  :  signal SIGIOT/SIGABRT   dumped core
kill11      7  TPASS  :  signal SIGIOT/SIGABRT   dumped core
kill11      8  TPASS  :  signal SIGBUS           dumped core
kill11      9  TPASS  :  signal SIGFPE           dumped core
kill11     10  TPASS  :  signal SIGKILL         
kill11     11  TPASS  :  signal SIGUSR1         
kill11     12  TPASS  :  signal SIGSEGV          dumped core
kill11     13  TPASS  :  signal SIGUSR2         
kill11     14  TPASS  :  signal SIGPIPE         
kill11     15  TPASS  :  signal SIGALRM         
kill11     16  TPASS  :  signal SIGTERM         
kill11     17  TPASS  :  signal SIGXCPU          dumped core
kill11     18  TPASS  :  signal SIGXFSZ          dumped core
kill11     19  TPASS  :  signal SIGVTALRM       
kill11     20  TPASS  :  signal SIGPROF         
kill11     21  TPASS  :  signal SIGIO/SIGPOLL   
kill11     22  TPASS  :  signal SIGPWR          
kill11     23  TPASS  :  signal SIGSYS/SIGUNUSED dumped core
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=kill12 stime=1575293877
cmdline="kill12"
contacts=""
analysis=exit
<<<test_output>>>
kill12      1  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lchown01 stime=1575293877
cmdline="lchown01"
contacts=""
analysis=exit
<<<test_output>>>
lchown01    1  TPASS  :  lchown() succeeds to Change Owner/Group ids of slink_file
lchown01    2  TPASS  :  lchown() succeeds to Change Owner id only of slink_file
lchown01    3  TPASS  :  lchown() succeeds to Change Owner/Group ids of slink_file
lchown01    4  TPASS  :  lchown() succeeds to Change Group id only of slink_file
lchown01    5  TPASS  :  lchown() succeeds to Change Group/Group ids of slink_file
lchown01    6  TPASS  :  lchown() succeeds to Change none of slink_file
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=lchown01_16 stime=1575293877
cmdline="lchown01_16"
contacts=""
analysis=exit
<<<test_output>>>
lchown01_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/lchown/../utils/compat_16.h:163: 16-bit version of lchown() is not supported on your platform
lchown01_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/lchown/../utils/compat_16.h:163: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lchown02 stime=1575293877
cmdline=" lchown02"
contacts=""
analysis=exit
<<<test_output>>>
lchown02    1  TPASS  :  lchown(2) fails, Process is not owner/root, errno:1
lchown02    2  TPASS  :  lchown(2) fails, Search permission denied, errno:13
lchown02    3  TPASS  :  lchown(2) fails, Unaccessible address space, errno:14
lchown02    4  TPASS  :  lchown(2) fails, Pathname too long, errno:36
lchown02    5  TPASS  :  lchown(2) fails, Path contains regular file, errno:20
lchown02    6  TPASS  :  lchown(2) fails, Pathname is empty, errno:2
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lchown03 stime=1575293877
cmdline=" lchown03"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.43.4 (31-Jan-2017)
lchown03    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
lchown03    0  TINFO  :  Formatting /dev/loop0 with ext2 opts='' extra opts=''
lchown03    1  TPASS  :  lchown() failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
lchown03    2  TPASS  :  lchown() failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=2
<<<test_end>>>
<<<test_start>>>
tag=lchown02_16 stime=1575293877
cmdline="lchown02_16"
contacts=""
analysis=exit
<<<test_output>>>
lchown02_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/lchown/../utils/compat_16.h:163: 16-bit version of lchown() is not supported on your platform
lchown02_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/lchown/../utils/compat_16.h:163: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=lchown03_16 stime=1575293877
cmdline="lchown03_16"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.43.4 (31-Jan-2017)
lchown03_16    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
lchown03_16    0  TINFO  :  Formatting /dev/loop0 with ext2 opts='' extra opts=''
lchown03_16    1  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/lchown/../utils/compat_16.h:163: 16-bit version of lchown() is not supported on your platform
lchown03_16    2  TCONF  :  /tmp/lkp/ltp/src/ltp/testcases/kernel/syscalls/lchown/../utils/compat_16.h:163: Remaining cases not appropriate for configuration
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=3
<<<test_end>>>
<<<test_start>>>
tag=lgetxattr01 stime=1575293878
cmdline="lgetxattr01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lgetxattr01.c:77: PASS: lgetxattr() got expected value
lgetxattr01.c:90: PASS: lgetxattr() failed as expected: ENODATA (61)

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lgetxattr02 stime=1575293878
cmdline="lgetxattr02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lgetxattr02.c:63: PASS: lgetxattr() failed as expected: ENODATA (61)
lgetxattr02.c:63: PASS: lgetxattr() failed as expected: ERANGE (34)
lgetxattr02.c:63: PASS: lgetxattr() failed as expected: EFAULT (14)

Summary:
passed   3
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=link01 stime=1575293878
cmdline="symlink01 -T link01"
contacts=""
analysis=exit
<<<test_output>>>
link01      1  TPASS  :  link(2) to a symbolic link, which is pointing to an existing object file worked - file created and link count adjusted
link01      2  TPASS  :  link(2) to a symbolic link, which is pointing to a non-existing object file worked ok - file created and link count adjusted.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=link02 stime=1575293878
cmdline="link02"
contacts=""
analysis=exit
<<<test_output>>>
link02      1  TPASS  :  link(oldpath,newpath) returned 0 and link counts match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=link03 stime=1575293878
cmdline="link03"
contacts=""
analysis=exit
<<<test_output>>>
link03      1  TPASS  :  link() passed and linkcounts=10 match
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=link04 stime=1575293878
cmdline="link04"
contacts=""
analysis=exit
<<<test_output>>>
link04      1  TPASS  :  link(<non-existent file>, <nefile>): TEST_ERRNO=ENOENT(2): No such file or directory
link04      2  TPASS  :  link(<path is empty string>, <nefile>): TEST_ERRNO=ENOENT(2): No such file or directory
link04      3  TPASS  :  link(<path contains a non-existent file>, <nefile>): TEST_ERRNO=ENOENT(2): No such file or directory
link04      4  TPASS  :  link(<path contains a regular file>, <nefile>): TEST_ERRNO=ENOTDIR(20): Not a directory
link04      5  TPASS  :  link(<pathname too long>, <nefile>): TEST_ERRNO=ENAMETOOLONG(36): File name too long
link04      6  TPASS  :  link(<invalid address>, <nefile>): TEST_ERRNO=EFAULT(14): Bad address
link04      7  TPASS  :  link(<regfile>, <empty string>): TEST_ERRNO=ENOENT(2): No such file or directory
link04      8  TPASS  :  link(<regfile>, <path contains a non-existent file>): TEST_ERRNO=ENOENT(2): No such file or directory
link04      9  TPASS  :  link(<regfile>, <path contains a regular file>): TEST_ERRNO=ENOENT(2): No such file or directory
link04     10  TPASS  :  link(<regfile>, <pathname too long>): TEST_ERRNO=ENAMETOOLONG(36): File name too long
link04     11  TPASS  :  link(<regfile>, <invalid address>): TEST_ERRNO=EFAULT(14): Bad address
link04     12  TPASS  :  link(<regfile>, <regfile2>): TEST_ERRNO=EEXIST(17): File exists
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=link05 stime=1575293878
cmdline="link05"
contacts=""
analysis=exit
<<<test_output>>>
link05      1  TPASS  :  link(lkfile_22960, lkfile_22960[1-1000]) ret 0 for 1000 files,stat linkcounts match 1000
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=link06 stime=1575293878
cmdline="link06"
contacts=""
analysis=exit
<<<test_output>>>
link06      1  TPASS  :  link() fails with expected error EACCES errno:13
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=link07 stime=1575293878
cmdline="link07"
contacts=""
analysis=exit
<<<test_output>>>
link07      1  TPASS  :  link() fails with expected error: TEST_ERRNO=EACCES(13): Permission denied
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=link08 stime=1575293878
cmdline="link08"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
link08.c:59: PASS: link() failed as expected: EPERM (1)
link08.c:59: PASS: link() failed as expected: EXDEV (18)
link08.c:59: PASS: link() failed as expected: EROFS (30)
link08.c:59: PASS: link() failed as expected: ELOOP (40)

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=linkat01 stime=1575293878
cmdline="linkat01"
contacts=""
analysis=exit
<<<test_output>>>
linkat01    1  TPASS  :  linkat is functionality correct
linkat01    2  TPASS  :  linkat succeeded as expected
linkat01    3  TPASS  :  linkat is functionality correct
linkat01    4  TPASS  :  linkat is functionality correct
linkat01    5  TPASS  :  linkat is functionality correct
linkat01    6  TPASS  :  linkat succeeded as expected
linkat01    7  TPASS  :  linkat is functionality correct
linkat01    8  TPASS  :  linkat failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
linkat01    9  TPASS  :  linkat failed as expected: TEST_ERRNO=ENOTDIR(20): Not a directory
linkat01   10  TPASS  :  linkat succeeded as expected
linkat01   11  TPASS  :  linkat is functionality correct
linkat01   12  TPASS  :  linkat failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
linkat01   13  TPASS  :  linkat failed as expected: TEST_ERRNO=EBADF(9): Bad file descriptor
linkat01   14  TPASS  :  linkat succeeded as expected
linkat01   15  TPASS  :  linkat is functionality correct
linkat01   16  TPASS  :  linkat failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
linkat01   17  TPASS  :  linkat failed as expected: TEST_ERRNO=ENOENT(2): No such file or directory
linkat01   18  TPASS  :  linkat succeeded as expected
linkat01   19  TPASS  :  linkat is functionality correct
linkat01   20  TPASS  :  linkat failed as expected: TEST_ERRNO=EXDEV(18): Invalid cross-device link
linkat01   21  TPASS  :  linkat failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
linkat01   22  TPASS  :  linkat failed as expected: TEST_ERRNO=EINVAL(22): Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=linkat02 stime=1575293878
cmdline="linkat02"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.43.4 (31-Jan-2017)
linkat02    0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
linkat02    0  TINFO  :  Formatting /dev/loop0 with ext2 opts='' extra opts=''
linkat02    0  TINFO  :  Failed reach the hardlinks limit
linkat02    1  TPASS  :  linkat failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
linkat02    2  TPASS  :  linkat failed as expected: TEST_ERRNO=ENAMETOOLONG(36): File name too long
linkat02    3  TPASS  :  linkat failed as expected: TEST_ERRNO=EEXIST(17): File exists
linkat02    4  TPASS  :  linkat failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
linkat02    5  TPASS  :  linkat failed as expected: TEST_ERRNO=EACCES(13): Permission denied
linkat02    6  TPASS  :  linkat failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
linkat02    7  TCONF  :  linkat02.c:108: EMLINK test is not appropriate
<<<execution_status>>>
initiation_status="ok"
duration=4 termination_type=exited termination_id=0 corefile=no
cutime=15 cstime=352
<<<test_end>>>
<<<test_start>>>
tag=listen01 stime=1575293882
cmdline="listen01"
contacts=""
analysis=exit
<<<test_output>>>
listen01    1  TPASS  :  bad file descriptor successful
listen01    2  TPASS  :  not a socket successful
listen01    3  TPASS  :  UDP listen successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=listxattr01 stime=1575293882
cmdline="listxattr01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
listxattr01.c:63: PASS: listxattr() succeeded

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=listxattr02 stime=1575293882
cmdline="listxattr02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
listxattr02.c:73: PASS: listxattr() failed as expected: ERANGE (34)
listxattr02.c:73: PASS: listxattr() failed as expected: ENOENT (2)
listxattr02.c:73: PASS: listxattr() failed as expected: EFAULT (14)
listxattr02.c:73: PASS: listxattr() failed as expected: ENAMETOOLONG (36)

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=listxattr03 stime=1575293882
cmdline="listxattr03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
listxattr03.c:54: PASS: listxattr() succeed with suitable buffer
listxattr03.c:54: PASS: listxattr() succeed with suitable buffer

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=llistxattr01 stime=1575293882
cmdline="llistxattr01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
llistxattr01.c:71: PASS: llistxattr() succeeded

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=llistxattr02 stime=1575293882
cmdline="llistxattr02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
llistxattr02.c:74: PASS: llistxattr() failed as expected: ERANGE (34)
llistxattr02.c:74: PASS: llistxattr() failed as expected: ENOENT (2)
llistxattr02.c:74: PASS: llistxattr() failed as expected: EFAULT (14)
llistxattr02.c:74: PASS: llistxattr() failed as expected: ENAMETOOLONG (36)

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=llistxattr03 stime=1575293882
cmdline="llistxattr03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
llistxattr03.c:55: PASS: llistxattr() succeed with suitable buffer
llistxattr03.c:55: PASS: llistxattr() succeed with suitable buffer

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=llseek01 stime=1575293882
cmdline="llseek01"
contacts=""
analysis=exit
<<<test_output>>>
llseek01    1  TPASS  :  Functionality of llseek() on tmp_file successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=llseek02 stime=1575293882
cmdline="llseek02"
contacts=""
analysis=exit
<<<test_output>>>
llseek02    1  TPASS  :  llseek() fails, 'whence' argument is not valid, errno:22
llseek02    2  TPASS  :  llseek() fails, 'fd' is not an open file descriptor, errno:9
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=llseek03 stime=1575293882
cmdline="llseek03"
contacts=""
analysis=exit
<<<test_output>>>
llseek03    1  TPASS  :  test SEEK_SET for llseek success
llseek03    2  TPASS  :  test SEEK_END for llseek success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lremovexattr01 stime=1575293882
cmdline="lremovexattr01"
contacts=""
analysis=exit
<<<test_output>>>
tst_device.c:238: INFO: Using test device LTP_DEV='/dev/loop0'
tst_supported_fs_types.c:60: INFO: Kernel supports ext2
tst_supported_fs_types.c:44: INFO: mkfs.ext2 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext3
tst_supported_fs_types.c:44: INFO: mkfs.ext3 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports ext4
tst_supported_fs_types.c:44: INFO: mkfs.ext4 does exist
tst_supported_fs_types.c:60: INFO: Kernel supports xfs
tst_supported_fs_types.c:44: INFO: mkfs.xfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports btrfs
tst_supported_fs_types.c:44: INFO: mkfs.btrfs does exist
tst_supported_fs_types.c:60: INFO: Kernel supports vfat
tst_supported_fs_types.c:44: INFO: mkfs.vfat does exist
tst_supported_fs_types.c:92: INFO: FUSE does support exfat
tst_supported_fs_types.c:44: INFO: mkfs.exfat does exist
tst_supported_fs_types.c:92: INFO: FUSE does support ntfs
tst_supported_fs_types.c:44: INFO: mkfs.ntfs does exist
tst_test.c:1179: INFO: Testing on ext2
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext2 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lremovexattr01.c:107: PASS: lremovexattr(2) removed attribute as expected
tst_test.c:1179: INFO: Testing on ext3
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext3 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lremovexattr01.c:107: PASS: lremovexattr(2) removed attribute as expected
tst_test.c:1179: INFO: Testing on ext4
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ext4 opts='' extra opts=''
mke2fs 1.43.4 (31-Jan-2017)
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lremovexattr01.c:107: PASS: lremovexattr(2) removed attribute as expected
tst_test.c:1179: INFO: Testing on xfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with xfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lremovexattr01.c:107: PASS: lremovexattr(2) removed attribute as expected
tst_test.c:1179: INFO: Testing on btrfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with btrfs opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lremovexattr01.c:107: PASS: lremovexattr(2) removed attribute as expected
tst_test.c:1179: INFO: Testing on vfat
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with vfat opts='' extra opts=''
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lremovexattr01.c:115: CONF: symlink() not supported
tst_test.c:1179: INFO: Testing on exfat
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with exfat opts='' extra opts=''
safe_macros.c:743: INFO: Trying FUSE...
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lremovexattr01.c:115: CONF: symlink() not supported
tst_test.c:1179: INFO: Testing on ntfs
tst_mkfs.c:90: INFO: Formatting /dev/loop0 with ntfs opts='' extra opts=''
The partition start sector was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
The number of sectors per track was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
The number of heads was not specified for /dev/loop0 and it could not be obtained automatically.  It has been set to 0.
To boot from a device, Windows needs the 'partition start sector', the 'sectors per track' and the 'number of heads' to be set.
Windows will not be able to boot from this device.
safe_macros.c:743: INFO: Trying FUSE...
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lremovexattr01.c:107: PASS: lremovexattr(2) removed attribute as expected

Summary:
passed   6
failed   0
skipped  2
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=7 termination_type=exited termination_id=0 corefile=no
cutime=8 cstime=219
<<<test_end>>>
<<<test_start>>>
tag=lseek01 stime=1575293889
cmdline="lseek01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lseek01.c:67: PASS: lseek(tfile, 4, SEEK_SET) read correct data
lseek01.c:67: PASS: lseek(tfile, -2, SEEK_CUR) read correct data
lseek01.c:67: PASS: lseek(tfile, -4, SEEK_END) read correct data
lseek01.c:67: PASS: lseek(tfile, 0, SEEK_END) read correct data

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lseek02 stime=1575293889
cmdline="lseek02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lseek02.c:65: PASS: lseek(-1, 1, 0) failed as expected: EBADF (9)
lseek02.c:65: PASS: lseek(-1, 1, 1) failed as expected: EBADF (9)
lseek02.c:65: PASS: lseek(-1, 1, 2) failed as expected: EBADF (9)
lseek02.c:65: PASS: lseek(7, 1, 5) failed as expected: EINVAL (22)
lseek02.c:65: PASS: lseek(7, 1, -1) failed as expected: EINVAL (22)
lseek02.c:65: PASS: lseek(7, 1, 7) failed as expected: EINVAL (22)
lseek02.c:65: PASS: lseek(8, 1, 0) failed as expected: ESPIPE (29)
lseek02.c:65: PASS: lseek(8, 1, 1) failed as expected: ESPIPE (29)
lseek02.c:65: PASS: lseek(8, 1, 2) failed as expected: ESPIPE (29)
lseek02.c:65: PASS: lseek(9, 1, 0) failed as expected: ESPIPE (29)
lseek02.c:65: PASS: lseek(9, 1, 1) failed as expected: ESPIPE (29)
lseek02.c:65: PASS: lseek(9, 1, 2) failed as expected: ESPIPE (29)
lseek02.c:65: PASS: lseek(11, 1, 0) failed as expected: ESPIPE (29)
lseek02.c:65: PASS: lseek(11, 1, 1) failed as expected: ESPIPE (29)
lseek02.c:65: PASS: lseek(11, 1, 2) failed as expected: ESPIPE (29)

Summary:
passed   15
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=lseek07 stime=1575293889
cmdline="lseek07"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lseek07.c:70: PASS: lseek(tfile1, 7, SEEK_SET) wrote correct data abcdefgijk
lseek07.c:70: PASS: lseek(tfile2, 2, SEEK_SET) wrote correct data abijkfg

Summary:
passed   2
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lseek11 stime=1575293889
cmdline="lseek11"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lseek11.c:162: INFO: The block size is 4096
lseek11.c:212: PASS: The 0th test passed: SEEK_DATA from startblock 0 offset 0
lseek11.c:212: PASS: The 1th test passed: SEEK_DATA from startblock 0 offset 4
lseek11.c:212: PASS: The 2th test passed: SEEK_HOLE from startblock 0 offset 0
lseek11.c:212: PASS: The 3th test passed: SEEK_HOLE from startblock 0 offset 4
lseek11.c:212: PASS: The 4th test passed: SEEK_HOLE from startblock 1 offset 0
lseek11.c:212: PASS: The 5th test passed: SEEK_HOLE from startblock 1 offset 128
lseek11.c:212: PASS: The 6th test passed: SEEK_DATA from startblock 1 offset 0
lseek11.c:212: PASS: The 7th test passed: SEEK_DATA from startblock 10 offset -1
lseek11.c:212: PASS: The 8th test passed: SEEK_DATA from startblock 10 offset 0
lseek11.c:212: PASS: The 9th test passed: SEEK_DATA from startblock 10 offset 4
lseek11.c:212: PASS: The 10th test passed: SEEK_HOLE from startblock 10 offset 0
lseek11.c:212: PASS: The 11th test passed: SEEK_HOLE from startblock 10 offset 4
lseek11.c:212: PASS: The 12th test passed: SEEK_HOLE from startblock 11 offset 128
lseek11.c:212: PASS: The 13th test passed: SEEK_DATA from startblock 11 offset 128
lseek11.c:212: PASS: The 14th test passed: SEEK_HOLE from startblock 30 offset -128

Summary:
passed   15
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=lstat01A stime=1575293890
cmdline="symlink01 -T lstat01"
contacts=""
analysis=exit
<<<test_output>>>
lstat01     1  TPASS  :  lstat(2) of symbolic link file which points to no object file is ok
lstat01     2  TPASS  :  lstat(2) of symbolic link file which points at an object file is ok
lstat01     3  TPASS  :  lstat(2) of object file returns object file inode information
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lstat01A_64 stime=1575293890
cmdline="symlink01 -T lstat01_64"
contacts=""
analysis=exit
<<<test_output>>>
lstat01_64    1  TPASS  :  lstat(2) of symbolic link file which points to no object file is ok
lstat01_64    2  TPASS  :  lstat(2) of symbolic link file which points at an object file is ok
lstat01_64    3  TPASS  :  lstat(2) of object file returns object file inode information
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lstat01 stime=1575293890
cmdline="lstat01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lstat01.c:47: PASS: lstat() reported correct values for the symlink!

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lstat01_64 stime=1575293890
cmdline="lstat01_64"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lstat01.c:47: PASS: lstat() reported correct values for the symlink!

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=lstat02 stime=1575293890
cmdline="lstat02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lstat02.c:72: PASS: lstat() failed as expected: EACCES (13)
lstat02.c:72: PASS: lstat() failed as expected: ENOENT (2)
lstat02.c:72: PASS: lstat() failed as expected: EFAULT (14)
lstat02.c:72: PASS: lstat() failed as expected: ENAMETOOLONG (36)
lstat02.c:72: PASS: lstat() failed as expected: ENOTDIR (20)
lstat02.c:72: PASS: lstat() failed as expected: ELOOP (40)

Summary:
passed   6
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=lstat02_64 stime=1575293890
cmdline="lstat02_64"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
lstat02.c:72: PASS: lstat() failed as expected: EACCES (13)
lstat02.c:72: PASS: lstat() failed as expected: ENOENT (2)
lstat02.c:72: PASS: lstat() failed as expected: EFAULT (14)
lstat02.c:72: PASS: lstat() failed as expected: ENAMETOOLONG (36)
lstat02.c:72: PASS: lstat() failed as expected: ENOTDIR (20)
lstat02.c:72: PASS: lstat() failed as expected: ELOOP (40)

Summary:
passed   6
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mallopt01 stime=1575293890
cmdline="mallopt01"
contacts=""
analysis=exit
<<<test_output>>>
mallopt01    1  TPASS  :  mallinfo() succeeded
mallopt01    2  TPASS  :  mallopt(M_MXFAST, 160) succeeded
mallopt01    3  TPASS  :  mallopt(M_NLBLKS, 50) succeeded
mallopt01    4  TPASS  :  malloc(1024) succeeded
mallopt01    5  TPASS  :  mallopt(M_MXFAST, 0) succeeded
mallopt01    6  TPASS  :  malloc(1024) succeeded
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mbind01 stime=1575293890
cmdline="mbind01"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
mbind01.c:169: INFO: case MPOL_DEFAULT
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case MPOL_DEFAULT (target exists)
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case MPOL_BIND (no target)
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case MPOL_BIND
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case MPOL_INTERLEAVE (no target)
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case MPOL_INTERLEAVE
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case MPOL_PREFERRED (no target)
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case MPOL_PREFERRED
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case UNKNOWN_POLICY
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case MPOL_DEFAULT (invalid flags)
mbind01.c:218: PASS: Test passed
mbind01.c:169: INFO: case MPOL_PREFERRED (invalid nodemask)
mbind01.c:218: PASS: Test passed

Summary:
passed   11
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=5
<<<test_end>>>
<<<test_start>>>
tag=mbind02 stime=1575293890
cmdline="mbind02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
tst_numa.c:191: INFO: Found 1 NUMA memory nodes
mbind02.c:38: CONF: Test requires at least two NUMA memory nodes

Summary:
passed   0
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mbind03 stime=1575293890
cmdline="mbind03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
tst_numa.c:191: INFO: Found 1 NUMA memory nodes
mbind03.c:35: CONF: Test requires at least two NUMA memory nodes

Summary:
passed   0
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mbind04 stime=1575293890
cmdline="mbind04"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
tst_numa.c:191: INFO: Found 1 NUMA memory nodes
mbind04.c:37: CONF: Test requires at least two NUMA memory nodes

Summary:
passed   0
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=memset01 stime=1575293890
cmdline="memset01"
contacts=""
analysis=exit
<<<test_output>>>
memset01    1  TPASS  :  Test passed
memset01    2  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=memcmp01 stime=1575293890
cmdline="memcmp01"
contacts=""
analysis=exit
<<<test_output>>>
memcmp1     1  TPASS  :  Test passed
memcmp1     2  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=memcpy01 stime=1575293890
cmdline="memcpy01"
contacts=""
analysis=exit
<<<test_output>>>
memcpy1     1  TPASS  :  Test passed
memcpy1     2  TPASS  :  Test passed
memcpy1     3  TPASS  :  Test passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=migrate_pages01 stime=1575293890
cmdline="migrate_pages01"
contacts=""
analysis=exit
<<<test_output>>>
migrate_pages01    0  TINFO  :  test_empty_mask
migrate_pages01    1  TPASS  :  expected ret success: returned value = 0
migrate_pages01    0  TINFO  :  test_invalid_pid -1
migrate_pages01    2  TPASS  :  expected ret success: returned value = -1
migrate_pages01    3  TPASS  :  expected failure: TEST_ERRNO=ESRCH(3): No such process
migrate_pages01    0  TINFO  :  test_invalid_pid unused pid
migrate_pages01    4  TPASS  :  expected ret success: returned value = -1
migrate_pages01    5  TPASS  :  expected failure: TEST_ERRNO=ESRCH(3): No such process
migrate_pages01    0  TINFO  :  test_invalid_masksize
migrate_pages01    6  TPASS  :  expected ret success: returned value = -1
migrate_pages01    7  TPASS  :  expected failure: TEST_ERRNO=EINVAL(22): Invalid argument
migrate_pages01    0  TINFO  :  test_invalid_mem -1
migrate_pages01    8  TPASS  :  expected ret success: returned value = -1
migrate_pages01    9  TPASS  :  expected failure: TEST_ERRNO=EFAULT(14): Bad address
migrate_pages01    0  TINFO  :  test_invalid_mem invalid prot
migrate_pages01   10  TPASS  :  expected ret success: returned value = -1
migrate_pages01   11  TPASS  :  expected failure: TEST_ERRNO=EFAULT(14): Bad address
migrate_pages01    0  TINFO  :  test_invalid_mem unmmaped
migrate_pages01   12  TPASS  :  expected ret success: returned value = -1
migrate_pages01   13  TPASS  :  expected failure: TEST_ERRNO=EFAULT(14): Bad address
migrate_pages01    0  TINFO  :  test_invalid_nodes
migrate_pages01   14  TPASS  :  expected ret success: returned value = -1
migrate_pages01   15  TPASS  :  expected failure: TEST_ERRNO=EINVAL(22): Invalid argument
migrate_pages01    0  TINFO  :  test_invalid_perm
migrate_pages01   16  TPASS  :  expected ret success: returned value = -1
migrate_pages01   17  TPASS  :  expected failure: TEST_ERRNO=EPERM(1): Operation not permitted
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=migrate_pages02 stime=1575293890
cmdline="migrate_pages02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
migrate_pages02.c:280: CONF: at least 2 allowed NUMA nodes are required

Summary:
passed   0
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=migrate_pages03 stime=1575293890
cmdline="migrate_pages03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
migrate_pages03.c:60: CONF: requires NUMA with at least 2 node

Summary:
passed   0
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=32 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mlockall01 stime=1575293890
cmdline="mlockall01"
contacts=""
analysis=exit
<<<test_output>>>
mlockall01    1  TPASS  :  mlockall test passed for MCL_CURRENT
mlockall01    2  TPASS  :  mlockall test passed for MCL_FUTURE
mlockall01    3  TPASS  :  mlockall test passed for MCL_CURRENT|MCL_FUTURE
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mlockall02 stime=1575293890
cmdline="mlockall02"
contacts=""
analysis=exit
<<<test_output>>>
mlockall02    1  TPASS  :  expected failure - errno = 12 : Cannot allocate memory
mlockall02    2  TPASS  :  expected failure - errno = 1 : Operation not permitted
mlockall02    3  TPASS  :  expected failure - errno = 22 : Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mlockall03 stime=1575293890
cmdline="mlockall03"
contacts=""
analysis=exit
<<<test_output>>>
mlockall03    1  TPASS  :  expected failure - errno = 12 : Cannot allocate memory
mlockall03    2  TPASS  :  expected failure - errno = 1 : Operation not permitted
mlockall03    3  TPASS  :  expected failure - errno = 22 : Invalid argument
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mkdir02 stime=1575293890
cmdline="mkdir02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
mkdir02.c:55: PASS: New dir inherited GID and S_ISGID

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mkdir03 stime=1575293890
cmdline="mkdir03"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
mkdir03.c:62: PASS: mkdir() failed as expected: EFAULT (14)
mkdir03.c:62: PASS: mkdir() failed as expected: ENAMETOOLONG (36)
mkdir03.c:62: PASS: mkdir() failed as expected: EEXIST (17)
mkdir03.c:62: PASS: mkdir() failed as expected: ENOENT (2)
mkdir03.c:62: PASS: mkdir() failed as expected: ENOTDIR (20)
mkdir03.c:62: PASS: mkdir() failed as expected: ELOOP (40)
mkdir03.c:62: PASS: mkdir() failed as expected: EROFS (30)

Summary:
passed   7
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mkdir04 stime=1575293890
cmdline="mkdir04"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
mkdir04.c:37: PASS: mkdir() failed expectedly: EACCES (13)

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mkdir05 stime=1575293890
cmdline="mkdir05"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
mkdir05.c:45: PASS: mkdir() functionality is correct

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mkdir05A stime=1575293890
cmdline="symlink01 -T mkdir05"
contacts=""
analysis=exit
<<<test_output>>>
mkdir05     1  TPASS  :  mkdir(2) of object file through symbolic link file failed as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mkdir09 stime=1575293890
cmdline="mkdir09"
contacts=""
analysis=exit
<<<test_output>>>
mkdir09     1  TPASS  :  PASS
<<<execution_status>>>
initiation_status="ok"
duration=10 termination_type=exited termination_id=0 corefile=no
cutime=216 cstime=1283
<<<test_end>>>
<<<test_start>>>
tag=mkdirat01 stime=1575293900
cmdline="mkdirat01"
contacts=""
analysis=exit
<<<test_output>>>
mkdirat01    1  TPASS  :  mkdirat() returned 0: TEST_ERRNO=SUCCESS(0): Success
mkdirat01    2  TPASS  :  mkdirat() returned 0: TEST_ERRNO=SUCCESS(0): Success
mkdirat01    3  TPASS  :  mkdirat() returned 0: TEST_ERRNO=SUCCESS(0): Success
mkdirat01    4  TPASS  :  mkdirat() returned -1: TEST_ERRNO=ENOTDIR(20): Not a directory
mkdirat01    5  TPASS  :  mkdirat() returned -1: TEST_ERRNO=EBADF(9): Bad file descriptor
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mkdirat02 stime=1575293900
cmdline="mkdirat02"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
mkdirat02.c:66: PASS: mkdirat() failed as expected: EROFS (30)
mkdirat02.c:66: PASS: mkdirat() failed as expected: EROFS (30)
mkdirat02.c:66: PASS: mkdirat() failed as expected: ELOOP (40)
mkdirat02.c:66: PASS: mkdirat() failed as expected: ELOOP (40)

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mknod01 stime=1575293900
cmdline="mknod01"
contacts=""
analysis=exit
<<<test_output>>>
mknod01     1  TPASS  :  mknod(test_node, 0100777, 0) returned 0
mknod01     2  TPASS  :  mknod(test_node, 010777, 0) returned 0
mknod01     3  TPASS  :  mknod(test_node, 020777, 259) returned 0
mknod01     4  TPASS  :  mknod(test_node, 060777, 0) returned 0
mknod01     5  TPASS  :  mknod(test_node, 0104700, 0) returned 0
mknod01     6  TPASS  :  mknod(test_node, 0102700, 0) returned 0
mknod01     7  TPASS  :  mknod(test_node, 0106700, 0) returned 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mknod02 stime=1575293900
cmdline="mknod02"
contacts=""
analysis=exit
<<<test_output>>>
mknod02     1  TPASS  :  Functionality of mknod(tnode_23219, 012777, 0) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mknod03 stime=1575293900
cmdline="mknod03"
contacts=""
analysis=exit
<<<test_output>>>
mknod03     1  TPASS  :  Functionality of mknod(tnode_23220, 012777, 0) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mknod04 stime=1575293900
cmdline="mknod04"
contacts=""
analysis=exit
<<<test_output>>>
mknod04     1  TPASS  :  Functionality of mknod(tnode_23221, 010777, 0) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mknod05 stime=1575293900
cmdline="mknod05"
contacts=""
analysis=exit
<<<test_output>>>
mknod05     1  TPASS  :  Functionality of mknod(tnode_23222, 012777, 0) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mknod06 stime=1575293900
cmdline="mknod06"
contacts=""
analysis=exit
<<<test_output>>>
mknod06     1  TPASS  :  mknod() fails, Specified node already exists, errno:17
mknod06     2  TPASS  :  mknod() fails, Invalid address, errno:14
mknod06     3  TPASS  :  mknod() fails, Non-existent file, errno:2
mknod06     4  TPASS  :  mknod() fails, Pathname is empty, errno:2
mknod06     5  TPASS  :  mknod() fails, Pathname too long, errno:36
mknod06     6  TPASS  :  mknod() fails, Path contains regular file, errno:20
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mknod07 stime=1575293900
cmdline="mknod07"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.43.4 (31-Jan-2017)
mknod07     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
mknod07     0  TINFO  :  Formatting /dev/loop0 with ext2 opts='' extra opts=''
mknod07     1  TPASS  :  mknod failed as expected: TEST_ERRNO=EACCES(13): Permission denied
mknod07     2  TPASS  :  mknod failed as expected: TEST_ERRNO=EACCES(13): Permission denied
mknod07     3  TPASS  :  mknod failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
mknod07     4  TPASS  :  mknod failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
mknod07     5  TPASS  :  mknod failed as expected: TEST_ERRNO=EROFS(30): Read-only file system
mknod07     6  TPASS  :  mknod failed as expected: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=mknod08 stime=1575293900
cmdline="mknod08"
contacts=""
analysis=exit
<<<test_output>>>
mknod08     1  TPASS  :  Functionality of mknod(tnode_23232, 010777, 0) successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mknod09 stime=1575293900
cmdline="mknod09"
contacts=""
analysis=exit
<<<test_output>>>
mknod09     1  TPASS  :  mknod() fails with expected error EINVAL errno:22
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mknodat01 stime=1575293900
cmdline="mknodat01"
contacts=""
analysis=exit
<<<test_output>>>
mknodat01    1  TPASS  :  mknodat() returned 0: TEST_ERRNO=SUCCESS(0): Success
mknodat01    2  TPASS  :  mknodat() returned 0: TEST_ERRNO=SUCCESS(0): Success
mknodat01    3  TPASS  :  mknodat() returned -1: TEST_ERRNO=ENOTDIR(20): Not a directory
mknodat01    4  TPASS  :  mknodat() returned -1: TEST_ERRNO=EBADF(9): Bad file descriptor
mknodat01    5  TPASS  :  mknodat() returned 0: TEST_ERRNO=SUCCESS(0): Success
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mknodat02 stime=1575293900
cmdline="mknodat02"
contacts=""
analysis=exit
<<<test_output>>>
mke2fs 1.43.4 (31-Jan-2017)
mknodat     0  TINFO  :  Using test device LTP_DEV='/dev/loop0'
mknodat     0  TINFO  :  Formatting /dev/loop0 with ext2 opts='' extra opts=''
mknodat     1  TPASS  :  mknodat() returned the expected value: TEST_ERRNO=SUCCESS(0): Success
mknodat     2  TPASS  :  mknodat() returned the expected value: TEST_ERRNO=SUCCESS(0): Success
mknodat     3  TPASS  :  mknodat() returned the expected value: TEST_ERRNO=SUCCESS(0): Success
mknodat     4  TPASS  :  mknodat() returned the expected value: TEST_ERRNO=EROFS(30): Read-only file system
mknodat     5  TPASS  :  mknodat() returned the expected value: TEST_ERRNO=EROFS(30): Read-only file system
mknodat     6  TPASS  :  mknodat() returned the expected value: TEST_ERRNO=EROFS(30): Read-only file system
mknodat     7  TPASS  :  mknodat() returned the expected value: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
mknodat     8  TPASS  :  mknodat() returned the expected value: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
mknodat     9  TPASS  :  mknodat() returned the expected value: TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
<<<execution_status>>>
initiation_status="ok"
duration=1 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=4
<<<test_end>>>
<<<test_start>>>
tag=mlock01 stime=1575293901
cmdline="mlock01"
contacts=""
analysis=exit
<<<test_output>>>
mlock01     1  TPASS  :  mlock passed
mlock01     2  TPASS  :  mlock passed
mlock01     3  TPASS  :  mlock passed
mlock01     4  TPASS  :  mlock passed
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mlock02 stime=1575293901
cmdline="mlock02"
contacts=""
analysis=exit
<<<test_output>>>
mlock02     1  TPASS  :  mlock failed as expected: TEST_ERRNO=ENOMEM(12): Cannot allocate memory
mlock02     2  TPASS  :  mlock failed as expected: TEST_ERRNO=ENOMEM(12): Cannot allocate memory
mlock02     3  TPASS  :  mlock failed as expected: TEST_ERRNO=EPERM(1): Operation not permitted
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mlock03 stime=1575293901
cmdline="mlock03 -i 20"
contacts=""
analysis=exit
<<<test_output>>>
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  mlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  mlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  mlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  mlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  mlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  mlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  mlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  mlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  mlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  mlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  mlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  mlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  mlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  mlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  mlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  mlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  mlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  mlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  mlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  munlock from 559980d1e000 to 559980d3c000
mlock03     0  TINFO  :  munlock from 559980f3c000 to 559980f3d000
mlock03     0  TINFO  :  munlock from 559980f3d000 to 559980f3e000
mlock03     0  TINFO  :  munlock from 559980f3e000 to 559980f41000
mlock03     0  TINFO  :  munlock from 559981b85000 to 559981ba6000
mlock03     0  TINFO  :  munlock from 7f25524c5000 to 7f255265a000
mlock03     0  TINFO  :  munlock from 7f255265a000 to 7f255285a000
mlock03     0  TINFO  :  munlock from 7f255285a000 to 7f255285e000
mlock03     0  TINFO  :  munlock from 7f255285e000 to 7f2552860000
mlock03     0  TINFO  :  munlock from 7f2552860000 to 7f2552864000
mlock03     0  TINFO  :  munlock from 7f2552864000 to 7f2552887000
mlock03     0  TINFO  :  munlock from 7f2552a7e000 to 7f2552a80000
mlock03     0  TINFO  :  munlock from 7f2552a87000 to 7f2552a88000
mlock03     0  TINFO  :  munlock from 7f2552a88000 to 7f2552a89000
mlock03     0  TINFO  :  munlock from 7f2552a89000 to 7f2552a8a000
mlock03     0  TINFO  :  munlock from 7ffd1dde1000 to 7ffd1de03000
mlock03     0  TINFO  :  munlock from 7ffd1dff3000 to 7ffd1dff6000
mlock03     0  TINFO  :  munlock from 7ffd1dff6000 to 7ffd1dff7000
mlock03     0  TINFO  :  munlock failed: errno=ENOMEM(12): Cannot allocate memory
mlock03     0  TINFO  :  munlock from ffffffffff600000 to ffffffffff601000
mlock03     0  TINFO  :  starting stack size is 136
mlock03     0  TINFO  :  final stack size is 136
mlock03     1  TPASS  :  stack size is not decreased.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=2
<<<test_end>>>
<<<test_start>>>
tag=mlock04 stime=1575293901
cmdline="mlock04"
contacts=""
analysis=exit
<<<test_output>>>
mlock04     0  TINFO  :  locked 40960 bytes from 0x7faa85c23000
mlock04     1  TPASS  :  test succeeded.
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mlock201 stime=1575293901
cmdline="mlock201"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
mlock201.c:128: PASS: mlock2(0) succeeded in locking 1 pages
mlock201.c:128: PASS: mlock2(0) succeeded in locking 8 pages
mlock201.c:128: PASS: mlock2(0) succeeded in locking 3 pages
mlock201.c:128: PASS: mlock2(0) succeeded in locking 2 pages
mlock201.c:128: PASS: mlock2(1) succeeded in locking 0 pages
mlock201.c:128: PASS: mlock2(1) succeeded in locking 4 pages
mlock201.c:128: PASS: mlock2(1) succeeded in locking 1 pages
mlock201.c:128: PASS: mlock2(1) succeeded in locking 4 pages

Summary:
passed   8
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mlock202 stime=1575293901
cmdline="mlock202"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
mlock202.c:75: PASS: mlock2() failed as expected: EINVAL (22)
mlock202.c:75: PASS: mlock2() failed as expected: ENOMEM (12)
mlock202.c:75: PASS: mlock2() failed as expected: EPERM (1)
mlock202.c:75: PASS: mlock2() failed as expected: ENOMEM (12)

Summary:
passed   4
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mlock203 stime=1575293901
cmdline="mlock203"
contacts=""
analysis=exit
<<<test_output>>>
tst_test.c:1118: INFO: Timeout per run is 0h 25m 00s
mlock203.c:66: PASS: Locking one memory again didn't increased VmLck

Summary:
passed   1
failed   0
skipped  0
warnings 0
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=qmm01 stime=1575293901
cmdline="mmap001 -m 1"
contacts=""
analysis=exit
<<<test_output>>>
mmap001     0  TINFO  :  mmap()ing file of 1 pages or 4096 bytes
mmap001     1  TPASS  :  mmap() completed successfully.
mmap001     0  TINFO  :  touching mmaped memory
mmap001     2  TPASS  :  we're still here, mmaped area must be good
mmap001     3  TPASS  :  synchronizing mmapped page passed
mmap001     4  TPASS  :  munmapping testfile.23250 successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mmap01 stime=1575293901
cmdline="mmap01"
contacts=""
analysis=exit
<<<test_output>>>
mmap01      1  TPASS  :  Functionality of mmap() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=1 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mmap02 stime=1575293901
cmdline="mmap02"
contacts=""
analysis=exit
<<<test_output>>>
mmap02      1  TPASS  :  Functionality of mmap() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mmap03 stime=1575293901
cmdline="mmap03"
contacts=""
analysis=exit
<<<test_output>>>
mmap03      1  TPASS  :  mmap() functionality is correct
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
<<<test_start>>>
tag=mmap04 stime=1575293901
cmdline="mmap04"
contacts=""
analysis=exit
<<<test_output>>>
mmap04      1  TPASS  :  Functionality of mmap() successful
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mmap05 stime=1575293901
cmdline="mmap05"
contacts=""
analysis=exit
<<<test_output>>>
mmap05      1  TPASS  :  Got SIGSEGV as expected
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mmap06 stime=1575293901
cmdline="mmap06"
contacts=""
analysis=exit
<<<test_output>>>
mmap06      1  TPASS  :  mmap failed with EACCES
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mmap07 stime=1575293901
cmdline="mmap07"
contacts=""
analysis=exit
<<<test_output>>>
mmap07      1  TPASS  :  mmap failed with EACCES
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=0
<<<test_end>>>
<<<test_start>>>
tag=mmap08 stime=1575293901
cmdline="mmap08"
contacts=""
analysis=exit
<<<test_output>>>
mmap08      1  TPASS  :  mmap failed with EBADF
incrementing stop
<<<execution_status>>>
initiation_status="ok"
duration=0 termination_type=exited termination_id=0 corefile=no
cutime=0 cstime=1
<<<test_end>>>
INFO: ltp-pan reported some tests FAIL
LTP Version: 20190930-35-gb8aebc835

       ###############################################################

            Done executing testcases.
            LTP Version:  20190930-35-gb8aebc835
       ###############################################################


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH 0/1] preparatory patch for a uid/gid shifting bind mount
  2019-11-30 21:19 [PATCH 0/1] preparatory patch for a uid/gid shifting bind mount James Bottomley
  2019-11-30 21:21 ` [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry James Bottomley
@ 2019-12-14 11:56 ` Christian Brauner
  1 sibling, 0 replies; 9+ messages in thread
From: Christian Brauner @ 2019-12-14 11:56 UTC (permalink / raw)
  To: James Bottomley
  Cc: linux-fsdevel, dhowells, Al Viro, Miklos Szeredi, linux-unionfs,
	Seth Forshee, Stéphane Graber, Eric Biederman, Aleksa Sarai,
	Christian Brauner

On Sat, Nov 30, 2019 at 01:19:23PM -0800, James Bottomley wrote:
> I had another look at what it would take to reimplement shiftfs as a
> true bind mount.  It turns out we do have struct path threaded in
> almost enough places to make it work.  There really is only one API
> that needs updating and that's notify_change(), so the following patch
> fixes that and pulls do_truncate() along as well.  The updates are
> mostly smooth and pretty obvious because the path was actually already
> present, except for in overlayfs where trying to sort out what the path
> should be is somewhat of a nightmare.  If the overlayfs people could
> take a look and make sure I got it right, I'd be grateful.
> 
> I think this is the only needed change, but I've only just got a
> functional implementation of a uid/gid shifting bind mount, so there
> might be other places that need rethreading as I find deficiencies in
> the current implementation.  I'll send them along as additional patches
> if I find them

Thanks for the patch. Can you please make sure to Cc the following
people who attended the dedicated shiftfs session together with you at
LPC in Lisbon for v2? They're all major stackholders in this:

Stéphane Graber <stgraber@ubuntu.com>
Eric Biederman <ebiederm@xmission.com>
David Howells <dhowells@redhat.com>
Aleksa Sarai <cyphar@cyphar.com>
Christian Brauner <christian.brauner@ubuntu.com>

(I haven't gotten around to looking at the initial bind mount patchset
you sent out about two weeks ago. Pre-holidays it's always tricky to
find time for proper reviews...)

Christian

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, back to index

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-30 21:19 [PATCH 0/1] preparatory patch for a uid/gid shifting bind mount James Bottomley
2019-11-30 21:21 ` [PATCH 1/1] fs: rethread notify_change to take a path instead of a dentry James Bottomley
2019-12-01  7:04   ` Amir Goldstein
2019-12-01 16:00     ` James Bottomley
2019-12-03  0:54     ` [PATCH v2] " James Bottomley
2019-12-01 11:47   ` [PATCH 1/1] " Matthew Wilcox
2019-12-01 15:55     ` James Bottomley
2019-12-03  9:18   ` [fs] 53d4a4300b: WARNING:at_fs/overlayfs/copy_up.c:#ovl_copy_up_inode[overlay] kernel test robot
2019-12-14 11:56 ` [PATCH 0/1] preparatory patch for a uid/gid shifting bind mount Christian Brauner

($INBOX_DIR/description missing)

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-unionfs/0 linux-unionfs/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-unionfs linux-unionfs/ https://lore.kernel.org/linux-unionfs \
		linux-unionfs@vger.kernel.org
	public-inbox-index linux-unionfs

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-unionfs


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git