Re: [RFC PATCH 3/3] overlay: Add the ability to remount volatile directories when safe

[Vivek Goyal <vgoyal@redhat.com>]

On Mon, Nov 16, 2020 at 10:18:03PM +0200, Amir Goldstein wrote:
> On Mon, Nov 16, 2020 at 6:36 PM Vivek Goyal <vgoyal@redhat.com> wrote:
> >
> > On Mon, Nov 16, 2020 at 05:20:04PM +0200, Amir Goldstein wrote:
> > > On Mon, Nov 16, 2020 at 4:42 PM Vivek Goyal <vgoyal@redhat.com> wrote:
> > > >
> > > > On Sun, Nov 15, 2020 at 08:57:58PM -0800, Sargun Dhillon wrote:
> > > > > Overlayfs added the ability to setup mounts where all syncs could be
> > > > > short-circuted in (2a99ddacee43: ovl: provide a mount option "volatile").
> > > > >
> > > > > A user might want to remount this fs, but we do not let the user because
> > > > > of the "incompat" detection feature. In the case of volatile, it is safe
> > > > > to do something like[1]:
> > > > >
> > > > > $ sync -f /root/upperdir
> > > > > $ rm -rf /root/workdir/incompat/volatile
> > > > >
> > > > > There are two ways to go about this. You can call sync on the underlying
> > > > > filesystem, check the error code, and delete the dirty file if everything
> > > > > is clean. If you're running lots of containers on the same filesystem, or
> > > > > you want to avoid all unnecessary I/O, this may be suboptimal.
> > > > >
> > > >
> > > > Hi Sargun,
> > > >
> > > > I had asked bunch of questions in previous mail thread to be more
> > > > clear on your requirements but never got any response. It would
> > > > have helped understanding your requirements better.
> > > >
> > > > How about following patch set which seems to sync only dirty inodes of
> > > > upper belonging to a particular overlayfs instance.
> > > >
> > > > https://lore.kernel.org/linux-unionfs/20201113065555.147276-1-cgxu519@mykernel.net/
> > > >
> > > > So if could implement a mount option which ignores fsync but upon
> > > > syncfs, only syncs dirty inodes of that overlayfs instance, it will
> > > > make sure we are not syncing whole of the upper fs. And we could
> > > > do this syncing on unmount of overlayfs and remove dirty file upon
> > > > successful sync.
> > > >
> > > > Looks like this will be much simpler method and should be able to
> > > > meet your requirements (As long as you are fine with syncing dirty
> > > > upper inodes of this overlay instance on unmount).
> > > >
> > >
> > > Do note that the latest patch set by Chengguang not only syncs dirty
> > > inodes of this overlay instance, but also waits for in-flight writeback on
> > > all the upper fs inodes and I think that with !ovl_should_sync(ofs)
> > > we will not re-dirty the ovl inodes and lose track of the list of dirty
> > > inodes - maybe that can be fixed.
> > >
> > > Also, I am not sure anymore that we can safely remove the dirty file after
> > > sync dirty inodes sync_fs and umount. If someone did sync_fs before us
> > > and consumed the error, we may have a copied up file in upper whose
> > > data is not on disk, but when we sync_fs on unmount we won't get an
> > > error? not sure.
> >
> > May be we can save errseq_t when mounting overlay and compare with
> > errseq_t stored in upper sb after unmount. That will tell us whether
> > error has happened since we mounted overlay. (Similar to what Sargun
> > is doing).
> >
> 
> I suppose so.
> 
> > In fact, if this is a concern, we have this issue with user space
> > "sync <upper>" too? Other sync might fail and this one succeeds
> > and we will think upper is just fine. May be container tools can
> > keep a file/dir open at the time of mount and call syncfs using
> > that fd instead. (And that should catch errors since that fd
> > was opened, I am assuming).
> >
> 
> Did not understand the problem with userspace sync.
> 
> > >
> > > I am less concerned about ways to allow re-mount of volatile
> > > overlayfs than I am about turning volatile overlayfs into non-volatile.
> >
> > If we are not interested in converting volatile containers into
> > non-volatile, then whole point of these patch series is to detect
> > if any writeback error has happened or not. If writeback error has
> > happened, then we detect that at remount and possibly throw away
> > container.
> >
> > What happens today if writeback error has happened. Is that page thrown
> > away from page cache and read back from disk? IOW, will user lose
> > the data it had written in page cache because writeback failed. I am
> > assuming we can't keep the dirty page around for very long otherwise
> > it has potential to fill up all the available ram with dirty pages which
> > can't be written back.
> >
> 
> Right. the resulting data is undefined after error.
> 
> > Why is it important to detect writeback error only during remount. What
> > happens if container overlay instance is already mounted and writeback
> > error happens. We will not detct that, right?
> >
> > IOW, if capturing writeback error is important for volatile containers,
> > then capturing it only during remount time is not enough. Normally
> > fsync/syncfs should catch it and now we have skipped those, so in
> > the process we lost mechanism to detect writeback errrors for
> > volatile containers?
> >
> 
> Yes, you are right.
> It's an issue with volatile that we should probably document.
> 
> I think upper files data can "evaporate" even as the overlay is still mounted.

I think assumption of volatile containers was that data will remain
valid as long as machine does not crash/shutdown. We missed the case
of possibility of writeback errors during those discussions. 

And if data can evaporate without anyway to know that somehthing
is gone wrong, I don't know how that's useful for applications.

Also, first we need to fix the case of writeback error handling
for volatile containers while it is mounted before one tries to fix it
for writeback error detection during remount, IMHO.

Thanks
Vivek