linux-unionfs.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vivek Goyal <vgoyal@redhat.com>
To: Sargun Dhillon <sargun@sargun.me>
Cc: linux-unionfs@vger.kernel.org, miklos@szeredi.hu,
	Amir Goldstein <amir73il@gmail.com>,
	Alexander Viro <viro@zeniv.linux.org.uk>,
	Giuseppe Scrivano <gscrivan@redhat.com>,
	Daniel J Walsh <dwalsh@redhat.com>,
	linux-fsdevel@vger.kernel.org,
	David Howells <dhowells@redhat.com>,
	Chengguang Xu <cgxu519@mykernel.net>,
	Christoph Hellwig <hch@lst.de>, NeilBrown <neilb@suse.com>,
	Jan Kara <jack@suse.cz>, Jeff Layton <jlayton@redhat.com>,
	Matthew Wilcox <willy@infradead.org>
Subject: Re: [PATCH v3] overlay: Implement volatile-specific fsync error behaviour
Date: Wed, 6 Jan 2021 14:46:58 -0500	[thread overview]
Message-ID: <20210106194658.GA3290@redhat.com> (raw)
In-Reply-To: <20210106083546.4392-1-sargun@sargun.me>

On Wed, Jan 06, 2021 at 12:35:46AM -0800, Sargun Dhillon wrote:
> Overlayfs's volatile option allows the user to bypass all forced sync calls
> to the upperdir filesystem. This comes at the cost of safety. We can never
> ensure that the user's data is intact, but we can make a best effort to
> expose whether or not the data is likely to be in a bad state.
> 
> The best way to handle this in the time being is that if an overlayfs's
> upperdir experiences an error after a volatile mount occurs, that error
> will be returned on fsync, fdatasync, sync, and syncfs. This is
> contradictory to the traditional behaviour of VFS which fails the call
> once, and only raises an error if a subsequent fsync error has occurred,
> and been raised by the filesystem.
> 
> One awkward aspect of the patch is that we have to manually set the
> superblock's errseq_t after the sync_fs callback as opposed to just
> returning an error from syncfs. This is because the call chain looks
> something like this:
> 
> sys_syncfs ->
> 	sync_filesystem ->
> 		__sync_filesystem ->
> 			/* The return value is ignored here
> 			sb->s_op->sync_fs(sb)
> 			_sync_blockdev
> 		/* Where the VFS fetches the error to raise to userspace */
> 		errseq_check_and_advance
> 
> Because of this we call errseq_set every time the sync_fs callback occurs.

Why not start capturing return code of ->sync_fs and then return error
from ovl->sync_fs. And then you don't have to do errseq_set(ovl_sb). 

I already posted a patch to capture retrun code from ->sync_fs.

https://lore.kernel.org/linux-fsdevel/20201221195055.35295-2-vgoyal@redhat.com/


> Due to the nature of this seen / unseen dichotomy, if the upperdir is an
> inconsistent state at the initial mount time, overlayfs will refuse to
> mount, as overlayfs cannot get a snapshot of the upperdir's errseq that
> will increment on error until the user calls syncfs.
> 
> Signed-off-by: Sargun Dhillon <sargun@sargun.me>
> Suggested-by: Amir Goldstein <amir73il@gmail.com>
> Cc: linux-fsdevel@vger.kernel.org
> Cc: linux-unionfs@vger.kernel.org
> Cc: Jeff Layton <jlayton@redhat.com>
> Cc: Miklos Szeredi <miklos@szeredi.hu>
> Cc: Amir Goldstein <amir73il@gmail.com>
> Cc: Vivek Goyal <vgoyal@redhat.com>
> Cc: Matthew Wilcox <willy@infradead.org>
> ---
>  Documentation/filesystems/overlayfs.rst |  8 +++++++
>  fs/overlayfs/file.c                     |  5 ++--
>  fs/overlayfs/overlayfs.h                |  1 +
>  fs/overlayfs/ovl_entry.h                |  2 ++
>  fs/overlayfs/readdir.c                  |  5 ++--
>  fs/overlayfs/super.c                    | 32 +++++++++++++++++++------
>  fs/overlayfs/util.c                     | 27 +++++++++++++++++++++
>  7 files changed, 69 insertions(+), 11 deletions(-)
> 
> diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst
> index 580ab9a0fe31..3af569cea6a7 100644
> --- a/Documentation/filesystems/overlayfs.rst
> +++ b/Documentation/filesystems/overlayfs.rst
> @@ -575,6 +575,14 @@ without significant effort.
>  The advantage of mounting with the "volatile" option is that all forms of
>  sync calls to the upper filesystem are omitted.
>  
> +In order to avoid a giving a false sense of safety, the syncfs (and fsync)
> +semantics of volatile mounts are slightly different than that of the rest of
> +VFS.  If any error occurs on the upperdir's filesystem after a volatile mount
                ^^^
shoud we say "If any writeback error occurs...."

> +takes place, all sync functions will return the last error observed on the
> +upperdir filesystem.  Once this condition is reached, the filesystem will not
> +recover, and every subsequent sync call will return an error, even if the
> +upperdir has not experience a new error since the last sync call.

Once filesystem fails, do we want to continue to return latest error on
upper? Or we just mark filesystem failed internally and once failed
we always return a fixed error, say -EIO. That way we don't have to
call errseq_check() on every filesystem call. I am assuming at some
point of time we will extend this to other filesystem functions
like read()/write()/mmap() etc. Filesystem has failed at this point 
of time and user is supposed to throw away upper and restart.

> +
>  When overlay is mounted with "volatile" option, the directory
>  "$workdir/work/incompat/volatile" is created.  During next mount, overlay
>  checks for this directory and refuses to mount if present. This is a strong
> diff --git a/fs/overlayfs/file.c b/fs/overlayfs/file.c
> index a1f72ac053e5..5c5c3972ebd0 100644
> --- a/fs/overlayfs/file.c
> +++ b/fs/overlayfs/file.c
> @@ -445,8 +445,9 @@ static int ovl_fsync(struct file *file, loff_t start, loff_t end, int datasync)
>  	const struct cred *old_cred;
>  	int ret;
>  
> -	if (!ovl_should_sync(OVL_FS(file_inode(file)->i_sb)))
> -		return 0;
> +	ret = ovl_sync_status(OVL_FS(file_inode(file)->i_sb));
> +	if (ret <= 0)
> +		return ret;
>  
>  	ret = ovl_real_fdget_meta(file, &real, !datasync);
>  	if (ret)
> diff --git a/fs/overlayfs/overlayfs.h b/fs/overlayfs/overlayfs.h
> index f8880aa2ba0e..9f7af98ae200 100644
> --- a/fs/overlayfs/overlayfs.h
> +++ b/fs/overlayfs/overlayfs.h
> @@ -322,6 +322,7 @@ int ovl_check_metacopy_xattr(struct ovl_fs *ofs, struct dentry *dentry);
>  bool ovl_is_metacopy_dentry(struct dentry *dentry);
>  char *ovl_get_redirect_xattr(struct ovl_fs *ofs, struct dentry *dentry,
>  			     int padding);
> +int ovl_sync_status(struct ovl_fs *ofs);
>  
>  static inline bool ovl_is_impuredir(struct super_block *sb,
>  				    struct dentry *dentry)
> diff --git a/fs/overlayfs/ovl_entry.h b/fs/overlayfs/ovl_entry.h
> index 1b5a2094df8e..b208eba5d0b6 100644
> --- a/fs/overlayfs/ovl_entry.h
> +++ b/fs/overlayfs/ovl_entry.h
> @@ -79,6 +79,8 @@ struct ovl_fs {
>  	atomic_long_t last_ino;
>  	/* Whiteout dentry cache */
>  	struct dentry *whiteout;
> +	/* r/o snapshot of upperdir sb's only taken on volatile mounts */
> +	errseq_t errseq;
>  };
>  
>  static inline struct vfsmount *ovl_upper_mnt(struct ovl_fs *ofs)
> diff --git a/fs/overlayfs/readdir.c b/fs/overlayfs/readdir.c
> index 01620ebae1bd..a273ef901e57 100644
> --- a/fs/overlayfs/readdir.c
> +++ b/fs/overlayfs/readdir.c
> @@ -909,8 +909,9 @@ static int ovl_dir_fsync(struct file *file, loff_t start, loff_t end,
>  	struct file *realfile;
>  	int err;
>  
> -	if (!ovl_should_sync(OVL_FS(file->f_path.dentry->d_sb)))
> -		return 0;
> +	err = ovl_sync_status(OVL_FS(file->f_path.dentry->d_sb));
> +	if (err <= 0)
> +		return err;
>  
>  	realfile = ovl_dir_real_file(file, true);
>  	err = PTR_ERR_OR_ZERO(realfile);
> diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c
> index 290983bcfbb3..b917b456bbb4 100644
> --- a/fs/overlayfs/super.c
> +++ b/fs/overlayfs/super.c
> @@ -261,11 +261,18 @@ static int ovl_sync_fs(struct super_block *sb, int wait)
>  	struct super_block *upper_sb;
>  	int ret;
>  
> -	if (!ovl_upper_mnt(ofs))
> -		return 0;
> +	ret = ovl_sync_status(ofs);
> +	/*
> +	 * We have to always set the err, because the return value isn't
> +	 * checked in syncfs, and instead indirectly return an error via
> +	 * the sb's writeback errseq, which VFS inspects after this call.
> +	 */
> +	if (ret < 0)
> +		errseq_set(&sb->s_wb_err, ret);

Again, I think we can simplify this. If we just capture return code of
->sync_fs in VFS and return to user space, we can simply return an
error instead of trying to play this game of setting errseq on overlay
superblock.

Thanks
Vivek

> +
> +	if (!ret)
> +		return ret;
>  
> -	if (!ovl_should_sync(ofs))
> -		return 0;
>  	/*
>  	 * Not called for sync(2) call or an emergency sync (SB_I_SKIP_SYNC).
>  	 * All the super blocks will be iterated, including upper_sb.
> @@ -1927,6 +1934,8 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent)
>  	sb->s_op = &ovl_super_operations;
>  
>  	if (ofs->config.upperdir) {
> +		struct super_block *upper_sb;
> +
>  		if (!ofs->config.workdir) {
>  			pr_err("missing 'workdir'\n");
>  			goto out_err;
> @@ -1936,6 +1945,16 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent)
>  		if (err)
>  			goto out_err;
>  
> +		upper_sb = ovl_upper_mnt(ofs)->mnt_sb;
> +		if (!ovl_should_sync(ofs)) {
> +			ofs->errseq = errseq_sample(&upper_sb->s_wb_err);
> +			if (errseq_check(&upper_sb->s_wb_err, ofs->errseq)) {
> +				err = -EIO;
> +				pr_err("Cannot mount volatile when upperdir has an unseen error. Sync upperdir fs to clear state.\n");
> +				goto out_err;
> +			}
> +		}
> +
>  		err = ovl_get_workdir(sb, ofs, &upperpath);
>  		if (err)
>  			goto out_err;
> @@ -1943,9 +1962,8 @@ static int ovl_fill_super(struct super_block *sb, void *data, int silent)
>  		if (!ofs->workdir)
>  			sb->s_flags |= SB_RDONLY;
>  
> -		sb->s_stack_depth = ovl_upper_mnt(ofs)->mnt_sb->s_stack_depth;
> -		sb->s_time_gran = ovl_upper_mnt(ofs)->mnt_sb->s_time_gran;
> -
> +		sb->s_stack_depth = upper_sb->s_stack_depth;
> +		sb->s_time_gran = upper_sb->s_time_gran;
>  	}
>  	oe = ovl_get_lowerstack(sb, splitlower, numlower, ofs, layers);
>  	err = PTR_ERR(oe);
> diff --git a/fs/overlayfs/util.c b/fs/overlayfs/util.c
> index 23f475627d07..6e7b8c882045 100644
> --- a/fs/overlayfs/util.c
> +++ b/fs/overlayfs/util.c
> @@ -950,3 +950,30 @@ char *ovl_get_redirect_xattr(struct ovl_fs *ofs, struct dentry *dentry,
>  	kfree(buf);
>  	return ERR_PTR(res);
>  }
> +
> +/*
> + * ovl_sync_status() - Check fs sync status for volatile mounts
> + *
> + * Returns 1 if this is not a volatile mount and a real sync is required.
> + *
> + * Returns 0 if syncing can be skipped because mount is volatile, and no errors
> + * have occurred on the upperdir since the mount.
> + *
> + * Returns -errno if it is a volatile mount, and the error that occurred since
> + * the last mount. If the error code changes, it'll return the latest error
> + * code.
> + */
> +
> +int ovl_sync_status(struct ovl_fs *ofs)
> +{
> +	struct vfsmount *mnt;
> +
> +	if (ovl_should_sync(ofs))
> +		return 1;
> +
> +	mnt = ovl_upper_mnt(ofs);
> +	if (!mnt)
> +		return 0;
> +
> +	return errseq_check(&mnt->mnt_sb->s_wb_err, ofs->errseq);

> +}
> -- 
> 2.25.1
> 


  parent reply	other threads:[~2021-01-06 19:48 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-06  8:35 [PATCH v3] overlay: Implement volatile-specific fsync error behaviour Sargun Dhillon
2021-01-06  9:34 ` Amir Goldstein
2021-01-06 19:46 ` Vivek Goyal [this message]
2021-01-07  3:51   ` Sargun Dhillon
2021-01-07  7:02   ` Amir Goldstein
2021-01-07  8:02     ` Sargun Dhillon
2021-01-07 13:44     ` Vivek Goyal
2021-01-07 14:44       ` Amir Goldstein
2021-01-07 14:57         ` Vivek Goyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210106194658.GA3290@redhat.com \
    --to=vgoyal@redhat.com \
    --cc=amir73il@gmail.com \
    --cc=cgxu519@mykernel.net \
    --cc=dhowells@redhat.com \
    --cc=dwalsh@redhat.com \
    --cc=gscrivan@redhat.com \
    --cc=hch@lst.de \
    --cc=jack@suse.cz \
    --cc=jlayton@redhat.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-unionfs@vger.kernel.org \
    --cc=miklos@szeredi.hu \
    --cc=neilb@suse.com \
    --cc=sargun@sargun.me \
    --cc=viro@zeniv.linux.org.uk \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).