On 14/05/2020 14:59, Felipe Balbi wrote: > Neil Armstrong writes: > >> Hi, >> >> On 14/05/2020 12:23, Felipe Balbi wrote: >>> Felipe Balbi writes: >>> >>>> Neil Armstrong writes: >>>> >>>>> The USB support was initialy done with a set of PHYs and dwc3-of-simple >>>>> because the architecture of the USB complex was not understood correctly >>>>> at the time (and proper documentation was missing...). >>>>> >>>>> But with the G12A family, the USB complex was correctly understood and >>>>> implemented correctly. >>>>> But seems the G12A architecture was derived for the GXL USB architecture, >>>>> with minor differences and looks we can share most of the USB DWC3 glue >>>>> driver. >>>>> >>>>> This patchset refactors and adds callbacks to handle the architecture >>>>> difference while keeping the main code shared. >>>>> >>>>> The main difference is that on GXL/GXM the USB2 PHY control registers >>>>> are mixed with the PHY registers (we already handle correctly), and >>>>> the GLUE registers are allmost (99%) the same as G12A. >>>>> >>>>> But, the GXL/GXM HW is buggy, here are the quirks : >>>>> - for the DWC2 controller to reset correctly, the GLUE mux must be switched >>>>> to peripheral when the DWC2 controlle probes. For now it's handled by simply >>>>> switching to device when probing the subnodes, but it may be not enough >>>>> - when manually switching from Host to Device when the USB port is not >>>>> populated (should not happen with proper Micro-USB/USB-C OTG switch), it >>>>> makes the DWC3 to crash. The only way to avoid that is to use the Host >>>>> Disconnect bit to disconnect the DWC3 controller from the port, but we can't >>>>> recover the Host functionnality unless resetting the DWC3 controller. >>>>> This bit is set when only manual switch is done, and a warning is printed >>>>> on manual switching. >>>>> >>>>> The patches 1-8 should be applied first, then either waiting the next release >>>>> or if the usb maintainer can provide us a stable tag, we can use it to merge >>>>> the DT and bindings. >>>> >>>> it's unclear to me if this series is ready to be merged. Can someone >>>> confirm? If it is, can you resend with all reviewed by tags in place? >>> >>> Are we getting a v2 for this? >>> >> >> Yes, even a v3 with reviews on all patches: >> http://lkml.kernel.org/r/20200416121910.12723-1-narmstrong@baylibre.com > > In that case, can you check that I have applied everything correctly in > testing/next? > > cheers > Looks fine, Thanks, Neil