From: Biju Das <biju.das@bp.renesas.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Biju Das <biju.das@bp.renesas.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Felipe Balbi <balbi@kernel.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
Simon Horman <horms@verge.net.au>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Chris Paterson <Chris.Paterson2@renesas.com>,
Fabrizio Castro <fabrizio.castro@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: [PATCH v7 1/7] dt-bindings: usb: hd3ss3220 device tree binding document
Date: Fri, 31 May 2019 10:59:54 +0100 [thread overview]
Message-ID: <1559296800-5610-2-git-send-email-biju.das@bp.renesas.com> (raw)
In-Reply-To: <1559296800-5610-1-git-send-email-biju.das@bp.renesas.com>
Add device tree binding document for TI HD3SS3220 Type-C DRP port
controller driver.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
v6-->V7
* Removed Rob's reviewed by tag, since there is a rework
* Incorporated Sergie and Shimoda-San's review comment
(https://patchwork.kernel.org/patch/10944629/)
V5-->V6
* No change.
V4-->V5
* No Change.
V3-->V4
* No Change.
V2-->V3
* Added Rob's Reviewed by tag.
V1-->V2
* Added connector node.
* updated the example with connector node.
---
.../devicetree/bindings/usb/ti,hd3ss3220.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
new file mode 100644
index 0000000..25780e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -0,0 +1,38 @@
+TI HD3SS3220 TypeC DRP Port Controller.
+
+Required properties:
+ - compatible: Must be "ti,hd3ss3220".
+ - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
+ - interrupts: An interrupt specifier.
+
+Required sub-node:
+ - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
+ bindings of the connector node are specified in:
+
+ Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+hd3ss3220@47 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x47>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ hd3ss3220_ep: endpoint {
+ remote-endpoint = <&usb3_role_switch>;
+ };
+ };
+ };
+ };
+};
--
2.7.4
next prev parent reply other threads:[~2019-05-31 10:07 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-31 9:59 [PATCH v7 0/7] Add USB3.0 and TI HD3SS3220 driver support Biju Das
2019-05-31 9:59 ` Biju Das [this message]
2019-06-11 21:55 ` [PATCH v7 1/7] dt-bindings: usb: hd3ss3220 device tree binding document Rob Herring
2019-05-31 9:59 ` [PATCH v7 2/7] dt-bindings: usb: renesas_usb3: Document usb role switch support Biju Das
2019-06-03 9:56 ` Yoshihiro Shimoda
2019-06-11 22:57 ` Rob Herring
2019-05-31 9:59 ` [PATCH v7 3/7] usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller Biju Das
2019-06-12 8:25 ` Heikki Krogerus
2019-06-12 8:42 ` Biju Das
2019-06-12 9:42 ` Heikki Krogerus
2019-06-18 6:47 ` Greg Kroah-Hartman
2019-06-18 6:57 ` Biju Das
2019-06-18 7:03 ` Greg Kroah-Hartman
2019-06-18 7:15 ` Biju Das
2019-05-31 9:59 ` [PATCH v7 4/7] usb: gadget: udc: renesas_usb3: Enhance role switch support Biju Das
2019-06-03 9:58 ` Yoshihiro Shimoda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1559296800-5610-2-git-send-email-biju.das@bp.renesas.com \
--to=biju.das@bp.renesas.com \
--cc=Chris.Paterson2@renesas.com \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=horms@verge.net.au \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).