Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: "Schmid, Carsten" <Carsten_Schmid@mentor.com>
To: Oliver Neukum <oneukum@suse.com>,
	"f.fainelli@gmail.com" <f.fainelli@gmail.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: AW: AW: AW: Strange behaviour of D-Link DUB-1312 USB 3.0 Adapters
Date: Mon, 19 Aug 2019 12:27:13 +0000
Message-ID: <1566217633219.68806@mentor.com> (raw)
In-Reply-To: <1566216675.5663.19.camel@suse.com>

Hi all,

we had a look at the adapters, and it's really a HW issue.
Nothing we can follow up here anymore.

Let's close it.

Thanks!

Best regards
Carsten
________________________________________
Von: Oliver Neukum <oneukum@suse.com>
Gesendet: Montag, 19. August 2019 14:11
An: Schmid, Carsten; f.fainelli@gmail.com
Cc: linux-usb@vger.kernel.org; Mathias Nyman
Betreff: Re: AW: AW: Strange behaviour of D-Link DUB-1312 USB 3.0 Adapters

Am Donnerstag, den 15.08.2019, 12:02 +0000 schrieb  Schmid, Carsten :
> > > I don't think its a regression.
> >
> > It would be better to know than to assume.
> >
>
> Happens with kernel 4.14.102 also, not only with 4.14.129.
> Looks more HW related.
>
> >
> > > Is there something i can do to force an error message to be seen
> > > when the ETH2USB adapter stalls?
> >
> > You can activate dynamic debugging for the xhci_hcd module
> > Remember that no data to transfer is not an error as such.
> >
> > > My current assumption is that the signal quality of the USB port is at a
> > > corner case, and therefore some "better" Adapters work, some "bad ones"
> > > don't. But as there is no error message seen in the dmesg, i am somehow lost.
> >
> > Two things you can do:
> >
> > 1. Generate a usbmon trace (it will be gigantic though)
> > 2. Activate dynamic debugging for the xhci_hcd module
>
> I did:
> echo -n 'module xhci_hcd =p' > /sys/kernel/debug/dynamic_debug/control
> echo -n 'usbcore =p' > /sys/kernel/debug/dynamic_debug/control
> echo 81920 > /sys/kernel/debug/tracing/buffer_size_kb
> echo 1 > /sys/kernel/debug/tracing/events/xhci-hcd/enable
> (used this when hunting for another USB issue in the past also)
>
> From traces/logs:
> ########################################
> I can see in dmesg at a certain point, i assume this is where trouble starts:
> [87800.393785] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.393869] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.393956] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.394045] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.394145] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.394216] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.394302] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.394385] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 15904 bytes untransferred
> [87800.394587] xhci_hcd 0000:00:15.0: Transfer error for slot 3 ep 5 on endpoint
> [87800.394596] xhci_hcd 0000:00:15.0: Cleaning up stalled endpoint ring
> [87800.394600] xhci_hcd 0000:00:15.0: Finding endpoint context
> [87800.394603] xhci_hcd 0000:00:15.0: Cycle state = 0x1
> [87800.394606] xhci_hcd 0000:00:15.0: New dequeue segment = ffff8d9330b29900 (virtual)
> [87800.394608] xhci_hcd 0000:00:15.0: New dequeue pointer = 0x174213400 (DMA)
> [87800.394610] xhci_hcd 0000:00:15.0: Queueing new dequeue state
> [87800.394613] xhci_hcd 0000:00:15.0: Set TR Deq Ptr cmd, new deq seg = ffff8d9330b29900 (0x174213000 dma), new deq ptr = ffff8d92b4213400 (0x174213400 dma), new cycle = 1
> [87800.394618] xhci_hcd 0000:00:15.0: // Ding dong!
> [87800.394622] xhci_hcd 0000:00:15.0: Giveback URB ffff8d931d65b600, len = 0, expected = 74, status = -71
> [87800.394629] xhci_hcd 0000:00:15.0: Ignoring reset ep completion code of 1
> [87800.394636] xhci_hcd 0000:00:15.0: Successful Set TR Deq Ptr cmd, deq = @174213400
> [87800.394836] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.394916] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395005] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395090] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395178] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395263] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395350] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395436] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395525] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395613] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395710] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395785] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 9808 bytes untransferred
> [87800.395868] xhci_hcd 0000:00:15.0: ep 0x82 - asked for 20480 bytes, 11328 bytes untransferred
> [87800.398155] xhci_hcd 0000:00:15.0: Transfer error for slot 3 ep 5 on endpoint
> [87800.398172] xhci_hcd 0000:00:15.0: Cleaning up stalled endpoint ring
> [87800.398175] xhci_hcd 0000:00:15.0: Finding endpoint context
> [87800.398179] xhci_hcd 0000:00:15.0: Cycle state = 0x1
> [87800.398181] xhci_hcd 0000:00:15.0: New dequeue segment = ffff8d9330b29900 (virtual)
> [87800.398184] xhci_hcd 0000:00:15.0: New dequeue pointer = 0x174213410 (DMA)
> [87800.398186] xhci_hcd 0000:00:15.0: Queueing new dequeue state
> [87800.398189] xhci_hcd 0000:00:15.0: Set TR Deq Ptr cmd, new deq seg = ffff8d9330b29900 (0x174213000 dma), new deq ptr = ffff8d92b4213410 (0x174213410 dma), new cycle = 1
> [87800.398192] xhci_hcd 0000:00:15.0: // Ding dong!
> [87800.398197] xhci_hcd 0000:00:15.0: Giveback URB ffff8d92b4374c00, len = 0, expected = 74, status = -71
> [87800.398209] xhci_hcd 0000:00:15.0: Ignoring reset ep completion code of 1
> [87800.398217] xhci_hcd 0000:00:15.0: Successful Set TR Deq Ptr cmd, deq = @174213410
> [87800.401654] xhci_hcd 0000:00:15.0: Transfer error for slot 3 ep 5 on endpoint

This points at a low level XHCI thing. Time to get Mathias involved.

        Regards
                Oliver


      reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-14  8:17 Schmid, Carsten
2019-08-14  8:31 ` Oliver Neukum
2019-08-14  8:56   ` AW: " Schmid, Carsten
2019-08-14 10:22     ` Schmid, Carsten
2019-08-14 13:07     ` Oliver Neukum
2019-08-15 12:02       ` AW: " Schmid, Carsten
2019-08-16 11:56         ` Schmid, Carsten
2019-08-19 12:11         ` Oliver Neukum
2019-08-19 12:27           ` Schmid, Carsten [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566217633219.68806@mentor.com \
    --to=carsten_schmid@mentor.com \
    --cc=f.fainelli@gmail.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@linux.intel.com \
    --cc=oneukum@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git