Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Biju Das <biju.das@bp.renesas.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
	Li Jun <jun.li@nxp.com>,
	Badhri Jagan Sridharan <badhri@google.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Min Guo <min.guo@mediatek.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Nagarjuna Kristam <nkristam@nvidia.com>
Subject: [PATCH next v10 09/11] usb: common: create Kconfig file
Date: Fri, 23 Aug 2019 15:57:19 +0800
Message-ID: <1566547041-20804-10-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1566547041-20804-1-git-send-email-chunfeng.yun@mediatek.com>

Create Kconfig file for USB common core, and move USB_LED_TRIG
and USB_ULPI_BUS configs into the new file from the parent Kconfig,
it will help to add new configs later.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v9~v10: no changes

v8:
  new patch
---
 drivers/usb/Kconfig        | 35 +----------------------------------
 drivers/usb/common/Kconfig | 38 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 34 deletions(-)
 create mode 100644 drivers/usb/common/Kconfig

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 6e59d370ef81..7bf94e65ed2f 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -36,8 +36,7 @@ menuconfig USB_SUPPORT
 
 if USB_SUPPORT
 
-config USB_COMMON
-	tristate
+source "drivers/usb/common/Kconfig"
 
 config USB_ARCH_HAS_HCD
 	def_bool y
@@ -175,36 +174,4 @@ source "drivers/usb/typec/Kconfig"
 
 source "drivers/usb/roles/Kconfig"
 
-config USB_LED_TRIG
-	bool "USB LED Triggers"
-	depends on LEDS_CLASS && LEDS_TRIGGERS
-	select USB_COMMON
-	help
-	  This option adds LED triggers for USB host and/or gadget activity.
-
-	  Say Y here if you are working on a system with led-class supported
-	  LEDs and you want to use them as activity indicators for USB host or
-	  gadget.
-
-config USB_ULPI_BUS
-	tristate "USB ULPI PHY interface support"
-	select USB_COMMON
-	help
-	  UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
-	  USB 2.0 PHY interface. The ULPI specification defines a standard set
-	  of registers that can be used to detect the vendor and product which
-	  allows ULPI to be handled as a bus. This module is the driver for that
-	  bus.
-
-	  The ULPI interfaces (the buses) are registered by the drivers for USB
-	  controllers which support ULPI register access and have ULPI PHY
-	  attached to them. The ULPI PHY drivers themselves are normal PHY
-	  drivers.
-
-	  ULPI PHYs provide often functions such as ADP sensing/probing (OTG
-	  protocol) and USB charger detection.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called ulpi.
-
 endif # USB_SUPPORT
diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig
new file mode 100644
index 000000000000..848545b099cf
--- /dev/null
+++ b/drivers/usb/common/Kconfig
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config USB_COMMON
+	tristate
+
+
+config USB_LED_TRIG
+	bool "USB LED Triggers"
+	depends on LEDS_CLASS && LEDS_TRIGGERS
+	select USB_COMMON
+	help
+	  This option adds LED triggers for USB host and/or gadget activity.
+
+	  Say Y here if you are working on a system with led-class supported
+	  LEDs and you want to use them as activity indicators for USB host or
+	  gadget.
+
+config USB_ULPI_BUS
+	tristate "USB ULPI PHY interface support"
+	select USB_COMMON
+	help
+	  UTMI+ Low Pin Interface (ULPI) is specification for a commonly used
+	  USB 2.0 PHY interface. The ULPI specification defines a standard set
+	  of registers that can be used to detect the vendor and product which
+	  allows ULPI to be handled as a bus. This module is the driver for that
+	  bus.
+
+	  The ULPI interfaces (the buses) are registered by the drivers for USB
+	  controllers which support ULPI register access and have ULPI PHY
+	  attached to them. The ULPI PHY drivers themselves are normal PHY
+	  drivers.
+
+	  ULPI PHYs provide often functions such as ADP sensing/probing (OTG
+	  protocol) and USB charger detection.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ulpi.
+
-- 
2.23.0


  parent reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23  7:57 [PATCH next v10 00/11] add USB GPIO based connection detection driver Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 01/11] dt-binding: usb: add usb-role-switch property Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 02/11] dt-bindings: connector: add optional properties for Type-B Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 03/11] dt-bindings: usb: add binding for USB GPIO based connection detection driver Chunfeng Yun
2019-08-23 10:07   ` Linus Walleij
2019-08-27 18:31   ` Rob Herring
2019-08-28  1:28     ` Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 04/11] dt-bindings: usb: mtu3: add properties about USB Role Switch Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 05/11] usb: roles: Introduce stubs for the exiting functions in role.h Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 06/11] device connection: Add fwnode_connection_find_match() Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 07/11] usb: roles: Add fwnode_usb_role_switch_get() function Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 08/11] usb: roles: get usb-role-switch from parent Chunfeng Yun
2019-08-23  7:57 ` Chunfeng Yun [this message]
2019-08-23  7:57 ` [PATCH next v10 10/11] usb: common: add USB GPIO based connection detection driver Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 11/11] usb: mtu3: register a USB Role Switch for dual role mode Chunfeng Yun

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566547041-20804-10-git-send-email-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=Adam.Thomson.Opensource@diasemi.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=badhri@google.com \
    --cc=biju.das@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jun.li@nxp.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=min.guo@mediatek.com \
    --cc=nkristam@nvidia.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git