Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Biju Das <biju.das@bp.renesas.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Adam Thomson <Adam.Thomson.Opensource@diasemi.com>,
	Li Jun <jun.li@nxp.com>,
	Badhri Jagan Sridharan <badhri@google.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Min Guo <min.guo@mediatek.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Nagarjuna Kristam <nkristam@nvidia.com>
Subject: [PATCH next v10 11/11] usb: mtu3: register a USB Role Switch for dual role mode
Date: Fri, 23 Aug 2019 15:57:21 +0800
Message-ID: <1566547041-20804-12-git-send-email-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <1566547041-20804-1-git-send-email-chunfeng.yun@mediatek.com>

Because extcon is not allowed for new bindings, and the
dual role switch is supported by USB Role Switch,
especially for Type-C drivers, so register a USB Role
Switch to support the new way

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v5~v10 no changes

v4 changes:
  1. assign fwnode member of usb_role_switch struct suggested by Heikki

v3 changes:
  1. select USB_ROLE_SWITCH in Kconfig suggested by Heikki
  2. rename ssusb_mode_manual_switch() to ssusb_mode_switch()

v2 no changes
---
 drivers/usb/mtu3/Kconfig        |  1 +
 drivers/usb/mtu3/mtu3.h         |  5 ++++
 drivers/usb/mtu3/mtu3_debugfs.c |  4 +--
 drivers/usb/mtu3/mtu3_dr.c      | 48 ++++++++++++++++++++++++++++++++-
 drivers/usb/mtu3/mtu3_dr.h      |  6 ++---
 drivers/usb/mtu3/mtu3_plat.c    |  3 ++-
 6 files changed, 60 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/mtu3/Kconfig b/drivers/usb/mtu3/Kconfig
index 928c2cd6fc00..bf98fd36341d 100644
--- a/drivers/usb/mtu3/Kconfig
+++ b/drivers/usb/mtu3/Kconfig
@@ -44,6 +44,7 @@ config USB_MTU3_DUAL_ROLE
 	bool "Dual Role mode"
 	depends on ((USB=y || USB=USB_MTU3) && (USB_GADGET=y || USB_GADGET=USB_MTU3))
 	depends on (EXTCON=y || EXTCON=USB_MTU3)
+	select USB_ROLE_SWITCH
 	help
 	  This is the default mode of working of MTU3 controller where
 	  both host and gadget features are enabled.
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index 76ecf12fdf62..6087be236a35 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -199,6 +199,9 @@ struct mtu3_gpd_ring {
 * @id_nb : notifier for iddig(idpin) detection
 * @id_work : work of iddig detection notifier
 * @id_event : event of iddig detecion notifier
+* @role_sw : use USB Role Switch to support dual-role switch, can't use
+*		extcon at the same time, and extcon is deprecated.
+* @role_sw_used : true when the USB Role Switch is used.
 * @is_u3_drd: whether port0 supports usb3.0 dual-role device or not
 * @manual_drd_enabled: it's true when supports dual-role device by debugfs
 *		to switch host/device modes depending on user input.
@@ -212,6 +215,8 @@ struct otg_switch_mtk {
 	struct notifier_block id_nb;
 	struct work_struct id_work;
 	unsigned long id_event;
+	struct usb_role_switch *role_sw;
+	bool role_sw_used;
 	bool is_u3_drd;
 	bool manual_drd_enabled;
 };
diff --git a/drivers/usb/mtu3/mtu3_debugfs.c b/drivers/usb/mtu3/mtu3_debugfs.c
index 62c57ddc554e..c96e5dab0a48 100644
--- a/drivers/usb/mtu3/mtu3_debugfs.c
+++ b/drivers/usb/mtu3/mtu3_debugfs.c
@@ -453,9 +453,9 @@ static ssize_t ssusb_mode_write(struct file *file, const char __user *ubuf,
 		return -EFAULT;
 
 	if (!strncmp(buf, "host", 4) && !ssusb->is_host) {
-		ssusb_mode_manual_switch(ssusb, 1);
+		ssusb_mode_switch(ssusb, 1);
 	} else if (!strncmp(buf, "device", 6) && ssusb->is_host) {
-		ssusb_mode_manual_switch(ssusb, 0);
+		ssusb_mode_switch(ssusb, 0);
 	} else {
 		dev_err(ssusb->dev, "wrong or duplicated setting\n");
 		return -EINVAL;
diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
index 5fcb71af875a..08e18448e8b8 100644
--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -7,6 +7,8 @@
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
  */
 
+#include <linux/usb/role.h>
+
 #include "mtu3.h"
 #include "mtu3_dr.h"
 #include "mtu3_debug.h"
@@ -280,7 +282,7 @@ static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx)
  * This is useful in special cases, such as uses TYPE-A receptacle but also
  * wants to support dual-role mode.
  */
-void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
+void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
 
@@ -318,6 +320,47 @@ void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
 	mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
 }
 
+static int ssusb_role_sw_set(struct device *dev, enum usb_role role)
+{
+	struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
+	bool to_host = false;
+
+	if (role == USB_ROLE_HOST)
+		to_host = true;
+
+	if (to_host ^ ssusb->is_host)
+		ssusb_mode_switch(ssusb, to_host);
+
+	return 0;
+}
+
+static enum usb_role ssusb_role_sw_get(struct device *dev)
+{
+	struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
+	enum usb_role role;
+
+	role = ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE;
+
+	return role;
+}
+
+static int ssusb_role_sw_register(struct otg_switch_mtk *otg_sx)
+{
+	struct usb_role_switch_desc role_sx_desc = { 0 };
+	struct ssusb_mtk *ssusb =
+		container_of(otg_sx, struct ssusb_mtk, otg_switch);
+
+	if (!otg_sx->role_sw_used)
+		return 0;
+
+	role_sx_desc.set = ssusb_role_sw_set;
+	role_sx_desc.get = ssusb_role_sw_get;
+	role_sx_desc.fwnode = dev_fwnode(ssusb->dev);
+	otg_sx->role_sw = usb_role_switch_register(ssusb->dev, &role_sx_desc);
+
+	return PTR_ERR_OR_ZERO(otg_sx->role_sw);
+}
+
 int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
 {
 	struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
@@ -328,6 +371,8 @@ int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
 
 	if (otg_sx->manual_drd_enabled)
 		ssusb_dr_debugfs_init(ssusb);
+	else if (otg_sx->role_sw_used)
+		ret = ssusb_role_sw_register(otg_sx);
 	else
 		ret = ssusb_extcon_register(otg_sx);
 
@@ -340,4 +385,5 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
 
 	cancel_work_sync(&otg_sx->id_work);
 	cancel_work_sync(&otg_sx->vbus_work);
+	usb_role_switch_unregister(otg_sx->role_sw);
 }
diff --git a/drivers/usb/mtu3/mtu3_dr.h b/drivers/usb/mtu3/mtu3_dr.h
index ba6fe357ce29..5e58c4dbd54a 100644
--- a/drivers/usb/mtu3/mtu3_dr.h
+++ b/drivers/usb/mtu3/mtu3_dr.h
@@ -71,7 +71,7 @@ static inline void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
 #if IS_ENABLED(CONFIG_USB_MTU3_DUAL_ROLE)
 int ssusb_otg_switch_init(struct ssusb_mtk *ssusb);
 void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb);
-void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host);
+void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host);
 int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on);
 void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
 			  enum mtu3_dr_force_mode mode);
@@ -86,8 +86,8 @@ static inline int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
 static inline void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
 {}
 
-static inline void
-ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host) {}
+static inline void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host)
+{}
 
 static inline int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on)
 {
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index fd0f6c5dfbc1..9c256ea3cdf5 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -299,8 +299,9 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 	otg_sx->is_u3_drd = of_property_read_bool(node, "mediatek,usb3-drd");
 	otg_sx->manual_drd_enabled =
 		of_property_read_bool(node, "enable-manual-drd");
+	otg_sx->role_sw_used = of_property_read_bool(node, "usb-role-switch");
 
-	if (of_property_read_bool(node, "extcon")) {
+	if (!otg_sx->role_sw_used && of_property_read_bool(node, "extcon")) {
 		otg_sx->edev = extcon_get_edev_by_phandle(ssusb->dev, 0);
 		if (IS_ERR(otg_sx->edev)) {
 			dev_err(ssusb->dev, "couldn't get extcon device\n");
-- 
2.23.0


      parent reply index

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-23  7:57 [PATCH next v10 00/11] add USB GPIO based connection detection driver Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 01/11] dt-binding: usb: add usb-role-switch property Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 02/11] dt-bindings: connector: add optional properties for Type-B Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 03/11] dt-bindings: usb: add binding for USB GPIO based connection detection driver Chunfeng Yun
2019-08-23 10:07   ` Linus Walleij
2019-08-27 18:31   ` Rob Herring
2019-08-28  1:28     ` Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 04/11] dt-bindings: usb: mtu3: add properties about USB Role Switch Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 05/11] usb: roles: Introduce stubs for the exiting functions in role.h Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 06/11] device connection: Add fwnode_connection_find_match() Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 07/11] usb: roles: Add fwnode_usb_role_switch_get() function Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 08/11] usb: roles: get usb-role-switch from parent Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 09/11] usb: common: create Kconfig file Chunfeng Yun
2019-08-23  7:57 ` [PATCH next v10 10/11] usb: common: add USB GPIO based connection detection driver Chunfeng Yun
2019-08-23  7:57 ` Chunfeng Yun [this message]

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566547041-20804-12-git-send-email-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=Adam.Thomson.Opensource@diasemi.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=badhri@google.com \
    --cc=biju.das@bp.renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jun.li@nxp.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=min.guo@mediatek.com \
    --cc=nkristam@nvidia.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git