Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org,
	"Mathias Nyman" <mathias.nyman@linux.intel.com>,
	"# v4 . 18+" <stable@vger.kernel.org>,
	"Loïc Yhuel" <loic.yhuel@gmail.com>
Subject: [PATCH 4/8] xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based hosts
Date: Fri,  4 Oct 2019 14:59:29 +0300
Message-ID: <1570190373-30684-5-git-send-email-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <1570190373-30684-1-git-send-email-mathias.nyman@linux.intel.com>

Early xHCI 1.1 spec did not mention USB 3.1 capable hosts should set
sbrn to 0x31, or that the minor revision is a two digit BCD
containing minor and sub-minor numbers.
This was later clarified in xHCI 1.2.

Some USB 3.1 capable hosts therefore have sbrn set to 0x30, or minor
revision set to 0x1 instead of 0x10.

Detect the USB 3.1 capability correctly for these hosts as well

Fixes: ddd57980a0fd ("xhci: detect USB 3.2 capable host controllers correctly")
Cc: <stable@vger.kernel.org> # v4.18+
Cc: Loïc Yhuel <loic.yhuel@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index a5ba5ace3d00..aec69d294973 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5079,11 +5079,18 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 		hcd->has_tt = 1;
 	} else {
 		/*
-		 * Some 3.1 hosts return sbrn 0x30, use xhci supported protocol
-		 * minor revision instead of sbrn. Minor revision is a two digit
-		 * BCD containing minor and sub-minor numbers, only show minor.
+		 * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
+		 * should return 0x31 for sbrn, or that the minor revision
+		 * is a two digit BCD containig minor and sub-minor numbers.
+		 * This was later clarified in xHCI 1.2.
+		 *
+		 * Some USB 3.1 capable hosts therefore have sbrn 0x30, and
+		 * minor revision set to 0x1 instead of 0x10.
 		 */
-		minor_rev = xhci->usb3_rhub.min_rev / 0x10;
+		if (xhci->usb3_rhub.min_rev == 0x1)
+			minor_rev = 1;
+		else
+			minor_rev = xhci->usb3_rhub.min_rev / 0x10;
 
 		switch (minor_rev) {
 		case 2:
-- 
2.7.4


  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-04 11:59 [PATCH 0/8] xhci fixes for usb-linus Mathias Nyman
2019-10-04 11:59 ` [PATCH 1/8] xhci: Fix false warning message about wrong bounce buffer write length Mathias Nyman
2019-10-04 11:59 ` [PATCH 2/8] xhci: Prevent device initiated U1/U2 link pm if exit latency is too long Mathias Nyman
2019-10-04 11:59 ` [PATCH 3/8] xhci: Check all endpoints for LPM timeout Mathias Nyman
2019-10-04 11:59 ` Mathias Nyman [this message]
2019-10-04 11:59 ` [PATCH 5/8] usb: xhci: wait for CNR controller not ready bit in xhci resume Mathias Nyman
2019-10-04 11:59 ` [PATCH 6/8] xhci: Prevent deadlock when xhci adapter breaks during init Mathias Nyman
2019-10-04 11:59 ` [PATCH 7/8] xhci: Increase STS_SAVE timeout in xhci_suspend() Mathias Nyman
     [not found]   ` <20191006120750.5334F2087E@mail.kernel.org>
2019-10-07 18:51     ` Kai-Heng Feng
2019-10-04 11:59 ` [PATCH 8/8] xhci: Fix NULL pointer dereference in xhci_clear_tt_buffer_complete() Mathias Nyman
2019-10-07 14:02   ` Johan Hovold
2019-10-08  8:15     ` Mathias Nyman
2019-10-11 12:47       ` Mathias Nyman
2019-10-11 12:58         ` [RFT PATCH] xhci: Fix use-after-free regression in xhci clear hub TT implementation Mathias Nyman
2019-10-14 10:16           ` Johan Hovold
2019-10-14 13:18             ` Mathias Nyman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1570190373-30684-5-git-send-email-mathias.nyman@linux.intel.com \
    --to=mathias.nyman@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=loic.yhuel@gmail.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git