Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
	Kai-Heng Feng <kai.heng.feng@canonical.com>,
	"# v5 . 2+" <stable@vger.kernel.org>,
	Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 7/8] xhci: Increase STS_SAVE timeout in xhci_suspend()
Date: Fri,  4 Oct 2019 14:59:32 +0300
Message-ID: <1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <1570190373-30684-1-git-send-email-mathias.nyman@linux.intel.com>

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

After commit f7fac17ca925 ("xhci: Convert xhci_handshake() to use
readl_poll_timeout_atomic()"), ASMedia xHCI may fail to suspend.

Although the algorithms are essentially the same, the old max timeout is
(usec + usec * time of doing readl()), and the new max timeout is just
usec, which is much less than the old one.

Increase the timeout to make ASMedia xHCI able to suspend again.

BugLink: https://bugs.launchpad.net/bugs/1844021
Fixes: f7fac17ca925 ("xhci: Convert xhci_handshake() to use readl_poll_timeout_atomic()")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8c068d0cc7c1..00f3804f7aa7 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1032,7 +1032,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 	writel(command, &xhci->op_regs->command);
 	xhci->broken_suspend = 0;
 	if (xhci_handshake(&xhci->op_regs->status,
-				STS_SAVE, 0, 10 * 1000)) {
+				STS_SAVE, 0, 20 * 1000)) {
 	/*
 	 * AMD SNPS xHC 3.0 occasionally does not clear the
 	 * SSS bit of USBSTS and when driver tries to poll
-- 
2.7.4


  parent reply index

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-04 11:59 [PATCH 0/8] xhci fixes for usb-linus Mathias Nyman
2019-10-04 11:59 ` [PATCH 1/8] xhci: Fix false warning message about wrong bounce buffer write length Mathias Nyman
2019-10-04 11:59 ` [PATCH 2/8] xhci: Prevent device initiated U1/U2 link pm if exit latency is too long Mathias Nyman
2019-10-04 11:59 ` [PATCH 3/8] xhci: Check all endpoints for LPM timeout Mathias Nyman
2019-10-04 11:59 ` [PATCH 4/8] xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based hosts Mathias Nyman
2019-10-04 11:59 ` [PATCH 5/8] usb: xhci: wait for CNR controller not ready bit in xhci resume Mathias Nyman
2019-10-04 11:59 ` [PATCH 6/8] xhci: Prevent deadlock when xhci adapter breaks during init Mathias Nyman
2019-10-04 11:59 ` Mathias Nyman [this message]
     [not found]   ` <20191006120750.5334F2087E@mail.kernel.org>
2019-10-07 18:51     ` [PATCH 7/8] xhci: Increase STS_SAVE timeout in xhci_suspend() Kai-Heng Feng
2019-10-04 11:59 ` [PATCH 8/8] xhci: Fix NULL pointer dereference in xhci_clear_tt_buffer_complete() Mathias Nyman
2019-10-07 14:02   ` Johan Hovold
2019-10-08  8:15     ` Mathias Nyman
2019-10-11 12:47       ` Mathias Nyman
2019-10-11 12:58         ` [RFT PATCH] xhci: Fix use-after-free regression in xhci clear hub TT implementation Mathias Nyman
2019-10-14 10:16           ` Johan Hovold
2019-10-14 13:18             ` Mathias Nyman

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1570190373-30684-8-git-send-email-mathias.nyman@linux.intel.com \
    --to=mathias.nyman@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kai.heng.feng@canonical.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git