Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/2] usb: mtu3: add a new function to do status stage
@ 2019-10-09  9:04 Chunfeng Yun
  2019-10-09  9:05 ` [PATCH 2/2] usb: mtu3: fix race condition about delayed_status Chunfeng Yun
  0 siblings, 1 reply; 2+ messages in thread
From: Chunfeng Yun @ 2019-10-09  9:04 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Felipe Balbi, Matthias Brugger, linux-usb, linux-arm-kernel,
	linux-mediatek, linux-kernel, Chunfeng Yun

Exact a new static function to do status stage

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/mtu3/mtu3_gadget_ep0.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 4da216c99726..df3fd055792f 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -153,6 +153,15 @@ static void ep0_stall_set(struct mtu3_ep *mep0, bool set, u32 pktrdy)
 		set ? "SEND" : "CLEAR", decode_ep0_state(mtu));
 }
 
+static void ep0_do_status_stage(struct mtu3 *mtu)
+{
+	void __iomem *mbase = mtu->mac_base;
+	u32 value;
+
+	value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
+	mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND);
+}
+
 static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq);
 
 static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)
@@ -297,8 +306,7 @@ static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
 		ep0_load_test_packet(mtu);
 
 	/* send status before entering test mode. */
-	value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
-	mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND);
+	ep0_do_status_stage(mtu);
 
 	/* wait for ACK status sent by host */
 	readl_poll_timeout_atomic(mbase + U3D_EP0CSR, value,
@@ -632,7 +640,6 @@ __acquires(mtu->lock)
 {
 	struct usb_ctrlrequest setup;
 	struct mtu3_request *mreq;
-	void __iomem *mbase = mtu->mac_base;
 	int handled = 0;
 
 	ep0_read_setup(mtu, &setup);
@@ -668,10 +675,7 @@ __acquires(mtu->lock)
 		mtu->delayed_status = true;
 	} else if (le16_to_cpu(setup.wLength) == 0) { /* no data stage */
 
-		mtu3_writel(mbase, U3D_EP0CSR,
-			(mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS)
-			| EP0_SETUPPKTRDY | EP0_DATAEND);
-
+		ep0_do_status_stage(mtu);
 		/* complete zlp request directly */
 		mreq = next_ep0_request(mtu);
 		if (mreq && !mreq->request.length)
@@ -802,12 +806,9 @@ static int ep0_queue(struct mtu3_ep *mep, struct mtu3_request *mreq)
 	}
 
 	if (mtu->delayed_status) {
-		u32 csr;
 
 		mtu->delayed_status = false;
-		csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
-		csr |= EP0_SETUPPKTRDY | EP0_DATAEND;
-		mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
+		ep0_do_status_stage(mtu);
 		/* needn't giveback the request for handling delay STATUS */
 		return 0;
 	}
-- 
2.23.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

* [PATCH 2/2] usb: mtu3: fix race condition about delayed_status
  2019-10-09  9:04 [PATCH 1/2] usb: mtu3: add a new function to do status stage Chunfeng Yun
@ 2019-10-09  9:05 ` Chunfeng Yun
  0 siblings, 0 replies; 2+ messages in thread
From: Chunfeng Yun @ 2019-10-09  9:05 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Felipe Balbi, Matthias Brugger, linux-usb, linux-arm-kernel,
	linux-mediatek, linux-kernel, Chunfeng Yun

usb_composite_setup_continue() may be called before composite_setup()
return USB_GADGET_DELAYED_STATUS, then the controller driver will
delay status stage after composite_setup() finish, but the class driver
don't ask the controller to continue delayed status anymore, this will
cause control transfer timeout.

happens when use mass storage (also enabled other class driver):

cpu1:                               cpu2
handle_setup(SET_CONFIG) //gadget driver
  unlock (g->lock)
  gadget_driver->setup()
    composite_setup()
      lock(cdev->lock)
        set_config()
          fsg_set_alt() // maybe some times due to many class are enabled
            raise FSG_STATE_CONFIG_CHANGE
            return USB_GADGET_DELAYED_STATUS
                                    handle_exception()
                                    usb_composite_setup_continue()
      unlock(cdev->lock)
                                      lock(cdev->lock)
                                        ep0_queue()
                                          lock (g->lock)
                                          //no delayed status, nothing todo
                                          unlock (g->lock)
                                      unlock(cdev->lock)
    return USB_GADGET_DELAYED_STATUS // composite_setup
  lock (g->lock)
get USB_GADGET_DELAYED_STATUS //handle_setup [1]

Try to fix the race condition as following:
After the driver gets USB_GADGET_DELAYED_STATUS at [1], if we find
there is a usb_request in ep0 request list, it means composite already
asked us to continue delayed status by usb_composite_setup_continue(),
so we skip request about delayed_status by composite_setup() and still
do status stage.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/usb/mtu3/mtu3_gadget_ep0.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index df3fd055792f..2be182bd793a 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -671,8 +671,16 @@ __acquires(mtu->lock)
 	if (mtu->test_mode) {
 		;	/* nothing to do */
 	} else if (handled == USB_GADGET_DELAYED_STATUS) {
-		/* handle the delay STATUS phase till receive ep_queue on ep0 */
-		mtu->delayed_status = true;
+
+		mreq = next_ep0_request(mtu);
+		if (mreq) {
+			/* already asked us to continue delayed status */
+			ep0_do_status_stage(mtu);
+			ep0_req_giveback(mtu, &mreq->request);
+		} else {
+			/* do delayed STATUS stage till receive ep0_queue */
+			mtu->delayed_status = true;
+		}
 	} else if (le16_to_cpu(setup.wLength) == 0) { /* no data stage */
 
 		ep0_do_status_stage(mtu);
-- 
2.23.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-09  9:04 [PATCH 1/2] usb: mtu3: add a new function to do status stage Chunfeng Yun
2019-10-09  9:05 ` [PATCH 2/2] usb: mtu3: fix race condition about delayed_status Chunfeng Yun

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org linux-usb@archiver.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/ public-inbox