From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: gregkh@linuxfoundation.org, robh+dt@kernel.org, mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
linux-renesas-soc@vger.kernel.org,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: [PATCH v2] dt-bindings: usb: renesas: usb3-peri: convert bindings to json-schema
Date: Wed, 6 Nov 2019 19:34:53 +0900 [thread overview]
Message-ID: <1573036493-16525-1-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw)
Convert Renesas USB 3.0 Peripheral controller bindings documentation
to json-schema.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
Changes from v1:
- Remove oneOf from compatible.
- Remove comments from reg, interrupts and clocks.
- Add maxItems on phys.
- Remove generic.txt and graph.txt references.
https://patchwork.kernel.org/patch/11205923/
.../devicetree/bindings/usb/renesas,usb3-peri.txt | 65 ----------------
.../devicetree/bindings/usb/renesas,usb3-peri.yaml | 86 ++++++++++++++++++++++
2 files changed, 86 insertions(+), 65 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt
create mode 100644 Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt
deleted file mode 100644
index 1343dfc..00000000
--- a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Renesas Electronics USB3.0 Peripheral driver
-
-Required properties:
- - compatible: Must contain one of the following:
- - "renesas,r8a774a1-usb3-peri"
- - "renesas,r8a774b1-usb3-peri"
- - "renesas,r8a774c0-usb3-peri"
- - "renesas,r8a7795-usb3-peri"
- - "renesas,r8a7796-usb3-peri"
- - "renesas,r8a77965-usb3-peri"
- - "renesas,r8a77990-usb3-peri"
- - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 or RZ/G2
- compatible device
-
- When compatible with the generic version, nodes must list the
- SoC-specific version corresponding to the platform first
- followed by the generic version.
-
- - reg: Base address and length of the register for the USB3.0 Peripheral
- - interrupts: Interrupt specifier for the USB3.0 Peripheral
- - clocks: clock phandle and specifier pair
-
-Optional properties:
- - phys: phandle + phy specifier pair
- - phy-names: must be "usb"
- - usb-role-switch: support role switch. see usb/generic.txt
-
-Sub-nodes:
-- any connector to the data bus of this controller should be modelled using the
- OF graph bindings specified in bindings/graph.txt, if the "usb-role-switch"
- property is used.
-
-Example of R-Car H3 ES1.x:
- usb3_peri0: usb@ee020000 {
- compatible = "renesas,r8a7795-usb3-peri",
- "renesas,rcar-gen3-usb3-peri";
- reg = <0 0xee020000 0 0x400>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 328>;
- };
-
- usb3_peri1: usb@ee060000 {
- compatible = "renesas,r8a7795-usb3-peri",
- "renesas,rcar-gen3-usb3-peri";
- reg = <0 0xee060000 0 0x400>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 327>;
- };
-
-Example of RZ/G2E:
- usb3_peri0: usb@ee020000 {
- compatible = "renesas,r8a774c0-usb3-peri",
- "renesas,rcar-gen3-usb3-peri";
- reg = <0 0xee020000 0 0x400>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 328>;
- companion = <&xhci0>;
- usb-role-switch;
-
- port {
- usb3_role_switch: endpoint {
- remote-endpoint = <&hd3ss3220_ep>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
new file mode 100644
index 00000000..92d8631
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3-peri.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/renesas,usb3-peri.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USB 3.0 Peripheral controller
+
+maintainers:
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a774a1-usb3-peri # RZ/G2M
+ - renesas,r8a774b1-usb3-peri # RZ/G2N
+ - renesas,r8a774c0-usb3-peri # RZ/G2E
+ - renesas,r8a7795-usb3-peri # R-Car H3
+ - renesas,r8a7796-usb3-peri # R-Car M3-W
+ - renesas,r8a77965-usb3-peri # R-Car M3-N
+ - renesas,r8a77990-usb3-peri # R-Car E3
+ - const: renesas,rcar-gen3-usb3-peri
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: usb
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ usb-role-switch:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Support role switch.
+
+ companion:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle of a companion.
+
+ port:
+ description: |
+ any connector to the data bus of this controller should be modelled
+ using the OF graph bindings specified, if the "usb-role-switch"
+ property is used.
+
+required:
+ - compatible
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a774c0-sysc.h>
+
+ usb3_peri0: usb@ee020000 {
+ compatible = "renesas,r8a774c0-usb3-peri", "renesas,rcar-gen3-usb3-peri";
+ reg = <0 0xee020000 0 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ companion = <&xhci0>;
+ usb-role-switch;
+
+ port {
+ usb3_role_switch: endpoint {
+ remote-endpoint = <&hd3ss3220_ep>;
+ };
+ };
+ };
--
2.7.4
next reply other threads:[~2019-11-06 10:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 10:34 Yoshihiro Shimoda [this message]
2019-11-07 0:59 ` [PATCH v2] dt-bindings: usb: renesas: usb3-peri: convert bindings to json-schema Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1573036493-16525-1-git-send-email-yoshihiro.shimoda.uh@renesas.com \
--to=yoshihiro.shimoda.uh@renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).