linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christian Gromm <christian.gromm@microchip.com>
To: <gregkh@linuxfoundation.org>
Cc: <driverdev-devel@linuxdriverproject.org>,
	<linux-usb@vger.kernel.org>,
	Christian Gromm <christian.gromm@microchip.com>
Subject: [PATCH v2 1/7] staging: most: usb: use dev_*() functions to print messages
Date: Thu, 14 May 2020 17:18:46 +0200	[thread overview]
Message-ID: <1589469532-21488-2-git-send-email-christian.gromm@microchip.com> (raw)
In-Reply-To: <1589469532-21488-1-git-send-email-christian.gromm@microchip.com>

This patch removes the pr_*() functions and uses dev_*() instead.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
v2:

 drivers/staging/most/usb/usb.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/most/usb/usb.c b/drivers/staging/most/usb/usb.c
index a4bf362..85d4fa0 100644
--- a/drivers/staging/most/usb/usb.c
+++ b/drivers/staging/most/usb/usb.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2013-2015 Microchip Technology Germany II GmbH & Co. KG
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/usb.h>
@@ -186,13 +185,14 @@ static inline int start_sync_ep(struct usb_device *usb_dev, u16 ep)
  * get_stream_frame_size - calculate frame size of current configuration
  * @cfg: channel configuration
  */
-static unsigned int get_stream_frame_size(struct most_channel_config *cfg)
+static unsigned int get_stream_frame_size(struct most_channel_config *cfg,
+					  struct device *dev)
 {
 	unsigned int frame_size = 0;
 	unsigned int sub_size = cfg->subbuffer_size;
 
 	if (!sub_size) {
-		pr_warn("Misconfig: Subbuffer size zero.\n");
+		dev_warn(dev, "Misconfig: Subbuffer size zero.\n");
 		return frame_size;
 	}
 	switch (cfg->data_type) {
@@ -201,7 +201,7 @@ static unsigned int get_stream_frame_size(struct most_channel_config *cfg)
 		break;
 	case MOST_CH_SYNC:
 		if (cfg->packets_per_xact == 0) {
-			pr_warn("Misconfig: Packets per XACT zero\n");
+			dev_warn(dev, "Misconfig: Packets per XACT zero\n");
 			frame_size = 0;
 		} else if (cfg->packets_per_xact == 0xFF) {
 			frame_size = (USB_MTU / sub_size) * sub_size;
@@ -210,7 +210,7 @@ static unsigned int get_stream_frame_size(struct most_channel_config *cfg)
 		}
 		break;
 	default:
-		pr_warn("Query frame size of non-streaming channel\n");
+		dev_warn(dev, "Query frame size of non-streaming channel\n");
 		break;
 	}
 	return frame_size;
@@ -270,7 +270,7 @@ static int hdm_poison_channel(struct most_interface *iface, int channel)
 static int hdm_add_padding(struct most_dev *mdev, int channel, struct mbo *mbo)
 {
 	struct most_channel_config *conf = &mdev->conf[channel];
-	unsigned int frame_size = get_stream_frame_size(conf);
+	unsigned int frame_size = get_stream_frame_size(conf, &mdev->dev);
 	unsigned int j, num_frames;
 
 	if (!frame_size)
@@ -304,7 +304,7 @@ static int hdm_remove_padding(struct most_dev *mdev, int channel,
 			      struct mbo *mbo)
 {
 	struct most_channel_config *const conf = &mdev->conf[channel];
-	unsigned int frame_size = get_stream_frame_size(conf);
+	unsigned int frame_size = get_stream_frame_size(conf, &mdev->dev);
 	unsigned int j, num_frames;
 
 	if (!frame_size)
@@ -697,7 +697,7 @@ static int hdm_configure_channel(struct most_interface *iface, int channel,
 
 	mdev->padding_active[channel] = true;
 
-	frame_size = get_stream_frame_size(conf);
+	frame_size = get_stream_frame_size(conf, &mdev->dev);
 	if (frame_size == 0 || frame_size > USB_MTU) {
 		dev_warn(dev, "Misconfig: frame size wrong\n");
 		return -EINVAL;
-- 
2.7.4


  reply	other threads:[~2020-05-14 15:18 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14 15:18 [PATCH v2 0/7] staging: most: usb: fix issues found in code audit Christian Gromm
2020-05-14 15:18 ` Christian Gromm [this message]
2020-05-14 15:18 ` [PATCH v2 2/7] staging: most: usb: remove reference to USB error codes Christian Gromm
2020-05-14 15:18 ` [PATCH v2 3/7] staging: most: usb: check number of reported endpoints Christian Gromm
2020-05-15  1:10   ` kbuild test robot
2020-05-14 15:18 ` [PATCH v2 4/7] staging: most: usb: use dev_dbg function Christian Gromm
2020-05-14 15:18 ` [PATCH v2 5/7] staging: most: fix typo in Kconfig Christian Gromm
2020-05-14 15:18 ` [PATCH v2 6/7] staging: most: usb: use macro ATTRIBUTE_GROUPS Christian Gromm
2020-05-14 15:18 ` [PATCH v2 7/7] Documentation: ABI: correct sysfs attribute description of MOST driver Christian Gromm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1589469532-21488-2-git-send-email-christian.gromm@microchip.com \
    --to=christian.gromm@microchip.com \
    --cc=driverdev-devel@linuxdriverproject.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).