From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
Eddie Hung <eddie.hung@mediatek.com>
Subject: [PATCH 01/11] usb: mtu3: remove unnecessary pointer checks
Date: Mon, 27 Jul 2020 15:14:50 +0800 [thread overview]
Message-ID: <1595834101-13094-1-git-send-email-chunfeng.yun@mediatek.com> (raw)
The class driver will ensure the parameters are valid
pointers before call the hook function of usb_ep_ops,
so no need check them again.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
drivers/usb/mtu3/mtu3_gadget.c | 25 ++++++-------------------
1 file changed, 6 insertions(+), 19 deletions(-)
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index f93732e..6b26cb8 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -263,23 +263,15 @@ void mtu3_free_request(struct usb_ep *ep, struct usb_request *req)
static int mtu3_gadget_queue(struct usb_ep *ep,
struct usb_request *req, gfp_t gfp_flags)
{
- struct mtu3_ep *mep;
- struct mtu3_request *mreq;
- struct mtu3 *mtu;
+ struct mtu3_ep *mep = to_mtu3_ep(ep);
+ struct mtu3_request *mreq = to_mtu3_request(req);
+ struct mtu3 *mtu = mep->mtu;
unsigned long flags;
int ret = 0;
- if (!ep || !req)
- return -EINVAL;
-
if (!req->buf)
return -ENODATA;
- mep = to_mtu3_ep(ep);
- mtu = mep->mtu;
- mreq = to_mtu3_request(req);
- mreq->mtu = mtu;
-
if (mreq->mep != mep)
return -EINVAL;
@@ -303,6 +295,7 @@ static int mtu3_gadget_queue(struct usb_ep *ep,
return -ESHUTDOWN;
}
+ mreq->mtu = mtu;
mreq->request.actual = 0;
mreq->request.status = -EINPROGRESS;
@@ -335,11 +328,11 @@ static int mtu3_gadget_dequeue(struct usb_ep *ep, struct usb_request *req)
struct mtu3_ep *mep = to_mtu3_ep(ep);
struct mtu3_request *mreq = to_mtu3_request(req);
struct mtu3_request *r;
+ struct mtu3 *mtu = mep->mtu;
unsigned long flags;
int ret = 0;
- struct mtu3 *mtu = mep->mtu;
- if (!ep || !req || mreq->mep != mep)
+ if (mreq->mep != mep)
return -EINVAL;
dev_dbg(mtu->dev, "%s : req=%p\n", __func__, req);
@@ -379,9 +372,6 @@ static int mtu3_gadget_ep_set_halt(struct usb_ep *ep, int value)
unsigned long flags;
int ret = 0;
- if (!ep)
- return -EINVAL;
-
dev_dbg(mtu->dev, "%s : %s...", __func__, ep->name);
spin_lock_irqsave(&mtu->lock, flags);
@@ -424,9 +414,6 @@ static int mtu3_gadget_ep_set_wedge(struct usb_ep *ep)
{
struct mtu3_ep *mep = to_mtu3_ep(ep);
- if (!ep)
- return -EINVAL;
-
mep->wedged = 1;
return usb_ep_set_halt(ep);
--
1.9.1
next reply other threads:[~2020-07-27 7:16 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-27 7:14 Chunfeng Yun [this message]
2020-07-27 7:14 ` [PATCH 02/11] usb: mtu3: fix macro for maximum number of packets Chunfeng Yun
2020-07-27 7:14 ` [PATCH 03/11] usb: mtu3: reinitialize CSR registers Chunfeng Yun
2020-07-27 7:14 ` [PATCH 04/11] usb: mtu3: clear interrupts status when disable interrupts Chunfeng Yun
2020-07-27 7:14 ` [PATCH 05/11] usb: mtu3: introduce a funtion to check maximum speed Chunfeng Yun
2020-07-27 7:14 ` [PATCH 06/11] usb: mtu3: add ->udc_set_speed() Chunfeng Yun
2020-07-27 7:14 ` [PATCH 07/11] usb: mtu3: remove repeated error log Chunfeng Yun
2020-07-27 7:14 ` [PATCH 08/11] usb: mtu3: remove useless member @busy in mtu3_ep struct Chunfeng Yun
2020-07-27 7:14 ` [PATCH 09/11] usb: mtu3: use MTU3_EP_WEDGE flag Chunfeng Yun
2020-07-27 7:14 ` [PATCH 10/11] usb: mtu3: clear dual mode of u3port when disable device Chunfeng Yun
2020-07-27 8:07 ` Sergei Shtylyov
2020-07-28 6:05 ` Chunfeng Yun
2020-07-27 7:15 ` [PATCH 11/11] usb: mtu3: simplify mtu3_req_complete() Chunfeng Yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1595834101-13094-1-git-send-email-chunfeng.yun@mediatek.com \
--to=chunfeng.yun@mediatek.com \
--cc=balbi@kernel.org \
--cc=eddie.hung@mediatek.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).