From: Rohit Agarwal <quic_rohiagar@quicinc.com>
To: agross@kernel.org, bjorn.andersson@linaro.org,
gregkh@linuxfoundation.org, robh+dt@kernel.org,
krzk+dt@kernel.org
Cc: manivannan.sadhasivam@linaro.org, linux-arm-msm@vger.kernel.org,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Rohit Agarwal <quic_rohiagar@quicinc.com>
Subject: [PATCH 4/4] ARM: dts: qcom: sdx65-mtp: Enable USB3 and PHY support
Date: Tue, 12 Apr 2022 16:33:34 +0530 [thread overview]
Message-ID: <1649761414-19217-5-git-send-email-quic_rohiagar@quicinc.com> (raw)
In-Reply-To: <1649761414-19217-1-git-send-email-quic_rohiagar@quicinc.com>
Enable the support for USB3 controller, QMP PHY and HS PHY on SDX65 MTP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 29 +++++++++++++++++++++++++----
1 file changed, 25 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 79dc31a..6920524 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -123,7 +123,7 @@
regulator-max-microvolt = <1300000>;
};
- ldo1 {
+ vreg_l1b_1p2: ldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -141,13 +141,13 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ldo4 {
+ vreg_l4b_0p88: ldo4 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ldo5 {
+ vreg_l5b_1p8: ldo5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -177,7 +177,7 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
- ldo10 {
+ vreg_l10b_3p08: ldo10 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
@@ -244,3 +244,24 @@
};
};
};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vreg_l4b_0p88>;
+ vdda33-supply = <&vreg_l10b_3p08>;
+ vdda18-supply = <&vreg_l5b_1p8>;
+};
+
+&usb_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l4b_0p88>;
+ vdda-pll-supply = <&vreg_l1b_1p2>;
+};
--
2.7.4
prev parent reply other threads:[~2022-04-12 12:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-12 11:03 [PATCH 0/4] Devicetree updates for Interconnect, USB3 and PHY support Rohit Agarwal
2022-04-12 11:03 ` [PATCH 1/4] ARM: dts: qcom: sdx65: Add interconnect nodes Rohit Agarwal
2022-04-12 11:19 ` Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 2/4] dt-bindings: usb: qcom,dwc3: Add binding for SDX65 Rohit Agarwal
2022-04-12 11:20 ` Krzysztof Kozlowski
2022-04-12 11:03 ` [PATCH 3/4] ARM: dts: qcom: sdx65: Add USB3 and PHY support Rohit Agarwal
2022-04-12 11:21 ` Krzysztof Kozlowski
2022-04-12 11:03 ` Rohit Agarwal [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1649761414-19217-5-git-send-email-quic_rohiagar@quicinc.com \
--to=quic_rohiagar@quicinc.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).