Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
WARNING: multiple messages have this Message-ID
From: Doug Anderson <dianders@chromium.org>
To: Minas Harutyunyan <hminas@synopsys.com>,
	Felipe Balbi <felipe.balbi@linux.intel.com>,
	heiko@sntech.de
Cc: Alan Stern <stern@rowland.harvard.edu>,
	Artur Petrosyan <Arthur.Petrosyan@synopsys.com>,
	amstan@chromium.org, linux-rockchip@lists.infradead.org,
	William Wu <william.wu@rock-chips.com>,
	linux-usb@vger.kernel.org, Stefan Wahren <stefan.wahren@i2se.com>,
	Randy Li <ayaka@soulik.info>,
	zyw@rock-chips.com, mka@chromium.org, ryandcase@chromium.org,
	Amelie Delaunay <amelie.delaunay@st.com>,
	jwerner@chromium.org, dinguyen@opensource.altera.com,
	Elaine Zhang <zhangqing@rock-chips.com>,
	Douglas Anderson <dianders@chromium.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [v2,5/5] ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports
Date: Wed, 17 Apr 2019 17:13:56 -0700
Message-ID: <20190418001356.124334-6-dianders@chromium.org> (raw)

We want to be able to wake from USB if a device is plugged in that
wants remote wakeup.  Enable it on both dwc2 controllers.

NOTE: this is added specifically to veyron and not to rk3288 in
general since it's not known whether all rk3288 boards are designed to
support USB wakeup.  It is plausible that some boards could shut down
important rails in S3.

Also note that currently wakeup doesn't seem to happen unless you use
the "deep" suspend mode (where SDRAM is turned off).  Presumably the
shallow suspend mode is gating some sort of clock that's important but
I couldn't easily figure out how to get it working.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v2:
- rk3288-veyron dts patch new for v2.

 arch/arm/boot/dts/rk3288-veyron.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 1252522392c7..1d8bfed7830c 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -424,6 +424,7 @@
 
 &usb_host1 {
 	status = "okay";
+	snps,need-phy-for-wake;
 };
 
 &usb_otg {
@@ -432,6 +433,7 @@
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
 	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
+	snps,need-phy-for-wake;
 };
 
 &vopb {

From: Douglas Anderson <dianders@chromium.org>
To: Minas Harutyunyan <hminas@synopsys.com>,
	Felipe Balbi <felipe.balbi@linux.intel.com>,
	heiko@sntech.de
Cc: Alan Stern <stern@rowland.harvard.edu>,
	Artur Petrosyan <Arthur.Petrosyan@synopsys.com>,
	amstan@chromium.org, linux-rockchip@lists.infradead.org,
	William Wu <william.wu@rock-chips.com>,
	linux-usb@vger.kernel.org, Stefan Wahren <stefan.wahren@i2se.com>,
	Randy Li <ayaka@soulik.info>,
	zyw@rock-chips.com, mka@chromium.org, ryandcase@chromium.org,
	Amelie Delaunay <amelie.delaunay@st.com>,
	jwerner@chromium.org, dinguyen@opensource.altera.com,
	Elaine Zhang <zhangqing@rock-chips.com>,
	Douglas Anderson <dianders@chromium.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/5] ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports
Date: Wed, 17 Apr 2019 17:13:56 -0700
Message-ID: <20190418001356.124334-6-dianders@chromium.org> (raw)
Message-ID: <20190418001356.22oLadlZcB7HSW1XTqZlfpEcnpPYhh4kOhg4JlhOPg8@z> (raw)
In-Reply-To: <20190418001356.124334-1-dianders@chromium.org>

We want to be able to wake from USB if a device is plugged in that
wants remote wakeup.  Enable it on both dwc2 controllers.

NOTE: this is added specifically to veyron and not to rk3288 in
general since it's not known whether all rk3288 boards are designed to
support USB wakeup.  It is plausible that some boards could shut down
important rails in S3.

Also note that currently wakeup doesn't seem to happen unless you use
the "deep" suspend mode (where SDRAM is turned off).  Presumably the
shallow suspend mode is gating some sort of clock that's important but
I couldn't easily figure out how to get it working.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

Changes in v2:
- rk3288-veyron dts patch new for v2.

 arch/arm/boot/dts/rk3288-veyron.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 1252522392c7..1d8bfed7830c 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -424,6 +424,7 @@
 
 &usb_host1 {
 	status = "okay";
+	snps,need-phy-for-wake;
 };
 
 &usb_otg {
@@ -432,6 +433,7 @@
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
 	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
+	snps,need-phy-for-wake;
 };
 
 &vopb {
-- 
2.21.0.593.g511ec345e18-goog


         reply index

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-18  0:13 [PATCH v2 0/5] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron Douglas Anderson
2019-04-18  0:13 ` [v2,1/5] usb: dwc2: bus suspend/resume for hosts with DWC2_POWER_DOWN_PARAM_NONE Doug Anderson
2019-04-18  0:13   ` [PATCH v2 1/5] " Douglas Anderson
2019-04-29  8:43   ` [v2,1/5] " Artur Petrosyan
2019-04-29  8:43     ` [PATCH v2 1/5] " Artur Petrosyan
2019-04-29 17:33     ` [v2,1/5] " Doug Anderson
2019-04-29 17:33       ` [PATCH v2 1/5] " Doug Anderson
2019-04-30  6:05       ` [v2,1/5] " Artur Petrosyan
2019-04-30  6:05         ` [PATCH v2 1/5] " Artur Petrosyan
2019-05-01  1:51         ` [v2,1/5] " Doug Anderson
2019-05-01  1:51           ` [PATCH v2 1/5] " Doug Anderson
2019-05-03  8:20           ` [v2,1/5] " Artur Petrosyan
2019-05-03  8:20             ` [PATCH v2 1/5] " Artur Petrosyan
2019-05-03 15:03             ` [v2,1/5] " Doug Anderson
2019-05-03 15:03               ` [PATCH v2 1/5] " Doug Anderson
2019-05-07  7:26               ` Artur Petrosyan
2019-05-01 23:58   ` [v2,1/5] " Doug Anderson
2019-05-01 23:58     ` [PATCH v2 1/5] " Doug Anderson
2019-05-03  8:25     ` [v2,1/5] " Artur Petrosyan
2019-05-03  8:25       ` [PATCH v2 1/5] " Artur Petrosyan
2019-05-03 15:07       ` [v2,1/5] " Doug Anderson
2019-05-03 15:07         ` [PATCH v2 1/5] " Doug Anderson
2019-05-07  7:05         ` Artur Petrosyan
2019-04-18  0:13 ` [v2,2/5] USB: Export usb_wakeup_enabled_descendants() Doug Anderson
2019-04-18  0:13   ` [PATCH v2 2/5] " Douglas Anderson
2019-04-18  0:13 ` [v2,3/5] Documentation: dt-bindings: Add snps,need-phy-for-wake for dwc2 USB Doug Anderson
2019-04-18  0:13   ` [PATCH v2 3/5] " Douglas Anderson
2019-04-25 12:40   ` [v2,3/5] " Felipe Balbi
2019-04-25 12:40     ` [PATCH v2 3/5] " Felipe Balbi
2019-04-25 18:09     ` [v2,3/5] " Doug Anderson
2019-04-25 18:09       ` [PATCH v2 3/5] " Doug Anderson
2019-04-25 19:58       ` [v2,3/5] " Doug Anderson
2019-04-25 19:58         ` [PATCH v2 3/5] " Doug Anderson
2019-05-02 18:36     ` [v2,3/5] " Doug Anderson
2019-05-02 18:36       ` [PATCH v2 3/5] " Doug Anderson
2019-04-30  1:23   ` [v2,3/5] " Rob Herring
2019-04-30  1:23     ` [PATCH v2 3/5] " Rob Herring
2019-04-30  5:25     ` [v2,3/5] " Doug Anderson
2019-04-30  5:25       ` [PATCH v2 3/5] " Doug Anderson
2019-04-18  0:13 ` [v2,4/5] USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabled Doug Anderson
2019-04-18  0:13   ` [PATCH v2 4/5] " Douglas Anderson
2019-04-25 12:41   ` [v2,4/5] " Felipe Balbi
2019-04-25 12:41     ` [PATCH v2 4/5] " Felipe Balbi
2019-04-18  0:13 ` Doug Anderson [this message]
2019-04-18  0:13   ` [PATCH v2 5/5] ARM: dts: rockchip: Allow wakeup from rk3288-veyron's dwc2 USB ports Douglas Anderson
2019-04-18 12:40 ` [PATCH v2 0/5] USB: dwc2: Allow wakeup from suspend; enable for rk3288-veyron Minas Harutyunyan
2019-04-18 15:54   ` Doug Anderson
2019-04-19 11:43     ` Artur Petrosyan
2019-04-19 16:44       ` Artur Petrosyan
2019-04-22 15:50         ` Artur Petrosyan

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190418001356.124334-6-dianders@chromium.org \
    --to=dianders@chromium.org \
    --cc=Arthur.Petrosyan@synopsys.com \
    --cc=amelie.delaunay@st.com \
    --cc=amstan@chromium.org \
    --cc=ayaka@soulik.info \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@opensource.altera.com \
    --cc=felipe.balbi@linux.intel.com \
    --cc=heiko@sntech.de \
    --cc=hminas@synopsys.com \
    --cc=jwerner@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=ryandcase@chromium.org \
    --cc=stefan.wahren@i2se.com \
    --cc=stern@rowland.harvard.edu \
    --cc=william.wu@rock-chips.com \
    --cc=zhangqing@rock-chips.com \
    --cc=zyw@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git