From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-usb@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH 08/12] USB: cytherm: convert to use dev_groups
Date: Tue, 6 Aug 2019 16:44:58 +0200 [thread overview]
Message-ID: <20190806144502.17792-9-gregkh@linuxfoundation.org> (raw)
In-Reply-To: <20190806144502.17792-1-gregkh@linuxfoundation.org>
USB drivers now support the ability for the driver core to handle the
creation and removal of device-specific sysfs files in a race-free
manner. Take advantage of that by converting the driver to use this by
moving the sysfs attributes into a group and assigning the dev_groups
pointer to it.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/cytherm.c | 64 +++++++++++---------------------------
1 file changed, 19 insertions(+), 45 deletions(-)
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index 8b15ab5e1450..3e3802aaefa3 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -36,20 +36,6 @@ struct usb_cytherm {
};
-/* local function prototypes */
-static int cytherm_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-static void cytherm_disconnect(struct usb_interface *interface);
-
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver cytherm_driver = {
- .name = "cytherm",
- .probe = cytherm_probe,
- .disconnect = cytherm_disconnect,
- .id_table = id_table,
-};
-
/* Vendor requests */
/* They all operate on one byte at a time */
#define PING 0x00
@@ -304,6 +290,15 @@ static ssize_t port1_store(struct device *dev, struct device_attribute *attr, co
}
static DEVICE_ATTR_RW(port1);
+static struct attribute *cytherm_attrs[] = {
+ &dev_attr_brightness.attr,
+ &dev_attr_temp.attr,
+ &dev_attr_button.attr,
+ &dev_attr_port0.attr,
+ &dev_attr_port1.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(cytherm);
static int cytherm_probe(struct usb_interface *interface,
const struct usb_device_id *id)
@@ -322,34 +317,10 @@ static int cytherm_probe(struct usb_interface *interface,
dev->brightness = 0xFF;
- retval = device_create_file(&interface->dev, &dev_attr_brightness);
- if (retval)
- goto error;
- retval = device_create_file(&interface->dev, &dev_attr_temp);
- if (retval)
- goto error;
- retval = device_create_file(&interface->dev, &dev_attr_button);
- if (retval)
- goto error;
- retval = device_create_file(&interface->dev, &dev_attr_port0);
- if (retval)
- goto error;
- retval = device_create_file(&interface->dev, &dev_attr_port1);
- if (retval)
- goto error;
-
dev_info (&interface->dev,
"Cypress thermometer device now attached\n");
return 0;
-error:
- device_remove_file(&interface->dev, &dev_attr_brightness);
- device_remove_file(&interface->dev, &dev_attr_temp);
- device_remove_file(&interface->dev, &dev_attr_button);
- device_remove_file(&interface->dev, &dev_attr_port0);
- device_remove_file(&interface->dev, &dev_attr_port1);
- usb_set_intfdata (interface, NULL);
- usb_put_dev(dev->udev);
- kfree(dev);
+
error_mem:
return retval;
}
@@ -360,12 +331,6 @@ static void cytherm_disconnect(struct usb_interface *interface)
dev = usb_get_intfdata (interface);
- device_remove_file(&interface->dev, &dev_attr_brightness);
- device_remove_file(&interface->dev, &dev_attr_temp);
- device_remove_file(&interface->dev, &dev_attr_button);
- device_remove_file(&interface->dev, &dev_attr_port0);
- device_remove_file(&interface->dev, &dev_attr_port1);
-
/* first remove the files, then NULL the pointer */
usb_set_intfdata (interface, NULL);
@@ -376,6 +341,15 @@ static void cytherm_disconnect(struct usb_interface *interface)
dev_info(&interface->dev, "Cypress thermometer now disconnected\n");
}
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver cytherm_driver = {
+ .name = "cytherm",
+ .probe = cytherm_probe,
+ .disconnect = cytherm_disconnect,
+ .id_table = id_table,
+ .dev_groups = cytherm_groups,
+};
+
module_usb_driver(cytherm_driver);
MODULE_AUTHOR(DRIVER_AUTHOR);
--
2.22.0
next prev parent reply other threads:[~2019-08-06 14:45 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-06 14:44 [PATCH 00/12] USB: dev_groups support for usb drivers Greg Kroah-Hartman
2019-08-05 19:36 ` [PATCH] USB: musb: convert platform driver to use dev_groups Greg Kroah-Hartman
2019-08-07 18:25 ` Bin Liu
2019-08-06 14:44 ` [PATCH 01/12] USB: add support for dev_groups to struct usb_driver Greg Kroah-Hartman
2019-08-06 14:44 ` [PATCH 02/12] USB: add support for dev_groups to struct usb_device_driver Greg Kroah-Hartman
2019-08-06 14:44 ` [PATCH 03/12] USB: atm: cxacru: convert to use dev_groups Greg Kroah-Hartman
2019-08-06 14:44 ` [PATCH 04/12] USB: ueagle-atm: " Greg Kroah-Hartman
2019-08-06 14:44 ` [PATCH 05/12] USB: usblp: " Greg Kroah-Hartman
2019-08-08 20:35 ` Pete Zaitcev
2019-08-06 14:44 ` [PATCH 06/12] USB: usbtmc: " Greg Kroah-Hartman
2019-08-06 14:44 ` [PATCH 07/12] USB: cypress_cy7c63: " Greg Kroah-Hartman
2019-08-06 14:44 ` Greg Kroah-Hartman [this message]
2019-08-06 14:44 ` [PATCH 09/12] USB: lvstest: " Greg Kroah-Hartman
2019-08-06 14:45 ` [PATCH 10/12] USB: trancevibrator: " Greg Kroah-Hartman
2019-08-06 14:45 ` [PATCH 11/12] USB: usbsevseg: " Greg Kroah-Hartman
2019-08-06 14:45 ` [PATCH 12/12] USB: usbip: " Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190806144502.17792-9-gregkh@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).